"update-index --unresolve" uses the unmerge_index_entry_at() that
assumes that the path to be unresolved must be in the index, which
makes it impossible to unresolve a path that was resolved as removal.
Rewrite unresolve_one() to use the unmerge_index_entry() to support
unresolving such a path.
Existing tests for "update-index --unresolve" forgot to check one
thing that tests for "checkout --merge -- paths" tested, which is to
make sure that resolve-undo record that has already been used to
recreate higher-stage index entries is removed. Add new invocations
of "ls-files --resolve-undo" after running "update-index --unresolve"
to make sure that unresolving with update-index does remove the used
resolve-undo records.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The resolve-undo index extension records up to three (mode, object
name) tuples for non-zero stages for each path that was resolved,
to be used to recreate the original conflicted state later when the
user requests.
The unmerge_index_entry_at() function uses the resolve-undo data to
do so, but it assumes that the path for which the conflicted state
needs to be recreated can be specified by the position in the
active_cache[] array. This obviously cannot salvage the state of
conflicted paths that were resolved by removing them. For example,
a delete-modify conflict, in which the change whose "modify" side
made is a trivial typofix, may legitimately be resolved to remove
the path, and resolve-undo extension does record the two (mode,
object name) tuples for the common ancestor version and their
version, lacking our version. But after recording such a removal of
the path, you should be able to use resolve-undo data to recreate
the conflicted state.
Introduce a new unmerge_index_entry() helper function that takes the
path (which does not necessarily have to exist in the active_cache[]
array) and resolve-undo data, and use it to reimplement unmerge_index()
public function that is used by "git rerere".
The limited interface is still kept for now, as it is used by "git
checkout -m" and "git update-index --unmerge", but these two codepaths
will be updated to lift the assumption to allow conflicts that resolved
to deletion can be recreated.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "update-index --unresolve $path" cannot find the resolve-undo
record for the path the user requested to unresolve, it stuffs the
blobs from HEAD and MERGE_HEAD to stage #2 and stage #3 as a
fallback. For this reason, the operation does not even start unless
both "HEAD" and "MERGE_HEAD" exist.
This is suboptimal in a few ways:
* It does not recreate stage #1. Even though it is a correct
design decision not to do so (because it is impossible to
recreate in general cases, without knowing how we got there,
including what merge strategy was used), it is much less useful
not to have that information in the index.
* It limits the "unresolve" operation only during a conflicted "git
merge" and nothing else. Other operations like "rebase",
"cherry-pick", and "switch -m" may result in conflicts, and the
user may want to unresolve the conflict that they incorrectly
resolved in order to redo the resolution, but the fallback would
not kick in.
* Most importantly, the entire "unresolve" operation is disabled
after a conflicted merge is committed and MERGE_HEAD is removed,
even though the index has perfectly usable resolve-undo records.
By lazily reading the HEAD and MERGE_HEAD only when we need to go to
the fallback codepath, we will allow cases where resolve-undo
records are available (which is 100% of the time, unless the user is
reading from an index file created by Git more than 10 years ago) to
proceed even after a conflicted merge was committed, during other
mergy operations that do not use MERGE_HEAD, or after the result of
such mergy operations has been committed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When redacting auth tokens in trace output from curl, we look for http/2
headers of the form "h2h3 [header: value]". This comes from b637a41ebe
(http: redact curl h2h3 headers in info, 2022-11-11).
But the "h2h3" prefix changed to just "h2" in curl's fc2f1e547 (http2:
support HTTP/2 to forward proxies, non-tunneling, 2023-04-14). That's in
released version curl 8.1.0; linking against that version means we'll
fail to correctly redact the trace. Our t5559.17 notices and fails.
We can fix this by matching either prefix, which should handle both old
and new versions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of github.com:git/git:
A few more topics after 2.41-rc1
Git 2.41-rc1
t/lib-httpd: make CGIPassAuth support conditional
t9001: mark the script as no longer leak checker clean
send-email: clear the $message_id after validation
upload-pack: advertise capabilities when cloning empty repos
A bit more before -rc1
imap-send: include strbuf.h
run-command.c: fix missing include under `NO_PTHREADS`
test: do not negate test_path_is_* to assert absense
t2021: do not negate test_path_is_dir
tests: do not negate test_path_exists
doc/git-config: add unit for http.lowSpeedLimit
rebase -r: fix the total number shown in the progress
rebase --update-refs: fix loops
attr: teach "--attr-source=<tree>" global option to "git"
A few bugs in the sequencer machinery that results in miscounting
the steps have been corrected.
* js/rebase-count-fixes:
rebase -r: fix the total number shown in the progress
rebase --update-refs: fix loops
Small fixes.
* jc/do-not-negate-test-helpers:
test: do not negate test_path_is_* to assert absense
t2021: do not negate test_path_is_dir
tests: do not negate test_path_exists
We started unconditionally testing with CGIPassAuth directive but
it is unavailable in older Apache that ships with CentOS 7 that has
about a year of shelf-life still left. The test has conditionally
been disabled when running with an ancient Apache. This was a fix
for a recent regression caught before the release, so no need to
mention it in the release notes.
* jk/http-test-cgipassauth-unavailable-in-older-apache:
t/lib-httpd: make CGIPassAuth support conditional
The server side of "git clone" now advertises the necessary hints
to clients to help them to clone from an empty repository and learn
object hash algorithm and the (unborn) branch pointed at by HEAD,
even over the older v0/v1 protocol.
* bc/clone-empty-repo-via-protocol-v0:
upload-pack: advertise capabilities when cloning empty repos
When "git send-email" that uses the validate hook is fed a message
without and then with Message-ID, it failed to auto-assign a unique
Message-ID to the former and instead reused the Message-ID from the
latter, which has been corrected. This was a fix for a recent
regression caught before the release, so no need to mention it in
the release notes.
* jc/send-email-pre-process-fix:
t9001: mark the script as no longer leak checker clean
send-email: clear the $message_id after validation
Fix the build problem with NO_PTHREADS defined, a fallout from
recent header file shuffling.
* tb/run-command-needs-alloc-h:
run-command.c: fix missing include under `NO_PTHREADS`
Commit 988aad99b4 (t5563: add tests for basic and anoymous HTTP access,
2023-02-27) added tests that require Apache to support the CGIPassAuth
directive, which was added in Apache 2.4.13. This is fairly old (~8
years), but recent enough that we still encounter it in the wild (e.g.,
RHEL/CentOS 7, which is not EOL until June 2024).
We can live with skipping the new tests on such a platform. But
unfortunately, since the directive is used unconditionally in our
apache.conf, it means the web server fails to start entirely, and we
cannot run other HTTP tests at all (e.g., the basic ones in t5551).
We can fix that by making the config conditional, and only triggering it
for t5563. That solves the problem for t5551 (which then ignores the
directive entirely). For t5563, we'd see apache complain in start_httpd;
with the default setting of GIT_TEST_HTTPD, we'd then skip the whole
script.
But that leaves one small problem: people may set GIT_TEST_HTTPD=1
explicitly, which instructs the tests to fail (rather than skip) when we
can't start the webserver (to avoid accidentally missing some tests).
This could be worked around by having the user manually set
GIT_SKIP_TESTS on a platform with an older Apache. But we can be a bit
friendlier by doing the version check ourselves and setting an
appropriate prereq. We'll use the (lack of) prereq to then skip the rest
of t5563. In theory we could use the prereq to skip individual tests, but
in practice this whole script depends on it.
Reported-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test uses "format-patch --thread" which is known to leak the
generated message ID list.
Plugging these leaks involves straightening out the memory ownership
rules around rev_info.message_id and rev_info.ref_message_ids, and
is beyond the scope of send-email fix, so for now mark the test as
leaky to unblock the topic before the release.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recently git-send-email started parsing the same message twice, once
to validate _all_ the message before sending even the first one, and
then after the validation hook is happy and each message gets sent,
to read the contents to find out where to send to etc.
Unfortunately, the effect of reading the messages for validation
lingered even after the validation is done. Namely $message_id gets
assigned if exists in the input files but the variable is global,
and it is not cleared before pre_process_file runs. This causes
reading a message without a message-id followed by reading a message
with a message-id to misbehave---the sub reports as if the message
had the same id as the previously written one.
Clear the variable before starting to read the headers in
pre_process_file.
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cloning an empty repository, protocol versions 0 and 1 currently
offer nothing but the header and flush packets for the /info/refs
endpoint. This means that no capabilities are provided, so the client
side doesn't know what capabilities are present.
However, this does pose a problem when working with SHA-256
repositories, since we use the capabilities to know the remote side's
object format (hash algorithm). As of 8b214c2e9d ("clone: propagate
object-format when cloning from void", 2023-04-05), this has been fixed
for protocol v2, since there we always read the hash algorithm from the
remote.
Fortunately, the push version of the protocol already indicates a clue
for how to solve this. When the /info/refs endpoint is accessed for a
push and the remote is empty, we include a dummy "capabilities^{}" ref
pointing to the all-zeros object ID. The protocol documentation already
indicates this should _always_ be sent, even for fetches and clones, so
let's just do that, which means we'll properly announce the hash
algorithm as part of the capabilities. This just works with the
existing code because we share the same ref code for fetches and clones,
and libgit2, JGit, and dulwich do as well.
There is one minor issue to fix, though. If we called send_ref with
namespaces, we would return NULL with the capabilities entry, which
would cause a crash. Instead, let's refactor out a function to print
just the ref itself without stripping the namespace and use it for our
special capabilities entry.
Add several sets of tests for HTTP as well as for local clones. The
behavior can be slightly different for HTTP versus a local or SSH clone
because of the stateless-rpc functionality, so it's worth testing both.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git --attr-source=<tree> cmd $args" is a new way to have any
command to read attributes not from the working tree but from the
given tree object.
* jc/attr-source-tree:
attr: teach "--attr-source=<tree>" global option to "git"
We make liberal use of the strbuf API functions and types, but the
inclusion of <strbuf.h> comes indirectly by including <http.h>,
which does not happen if you build with NO_CURL.
Signed-off-by: Christian Hesse <mail@eworm.de>
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git 2.41-rc0 fails to compile run-command.c with `NO_PTHREADS` defined,
i.e.
$ make NO_PTHREADS=1 run-command.o
as `ALLOC_GROW()` macro is used in the `atexit()` emulation but the
macro definition is not available.
This bisects to 36bf195890 (alloc.h: move ALLOC_GROW() functions from
cache.h, 2023-02-24), which replaced includes of <cache.h> with
<alloc.h>, which is the new home of `ALLOC_GROW()` (and
`ALLOC_GROW_BY()`).
We can see that run-command.c is the only one that try to use these
macros without including <alloc.h>.
$ git grep -l -e '[^_]ALLOC_GROW(' -e 'ALLOC_GROW_BY(' \*.c | sort >/tmp/1
$ git grep -l 'alloc\.h' \*.c | sort >/tmp/2
$ comm -23 /tmp/[12]
compat/simple-ipc/ipc-unix-socket.c
run-command.c
The "compat/" file only talks about the macro in the comment,
and is not broken.
We could fix this by conditionally including "alloc.h" when
`NO_PTHREADS` is defined. But we have relatively few examples of
conditional includes throughout the tree[^1].
Instead, include "alloc.h" unconditionally in run-command.c to allow it
to successfully compile even when NO_PTHREADS is defined.
[^1]: With `git grep -E -A1 '#if(n)?def' -- **/*.c | grep '#include' -B1`.
Reported-by: Randall S. Becker <randall.becker@nexbridge.ca>
Co-authored-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests use "! test_path_is_dir" or "! test_path_is_file" to
ensure that the path is not recursively checked out or "submodule
update" did not touch the working tree.
Use "test_path_is_missing" to assert that the path does not exist,
instead of negating test_path_is_* helpers; they are designed to be
loud in wrong occasions. Besides, negating "test_path_is_dir" would
mean we would be happy if a file exists there, which is not the case
for these tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this test, a path (some_dir) that is originally a directory is to
be removed and then to be replaced with a file of the same name.
The expectation is that the path becomes a file at the end.
However, "! test_path_is_dir some_dir" is used to catch a breakage
that leaves the path as a directory.
But as with all the "test_path_is..." helpers, this use of the
helper makes it loud when the expectation (i.e. it is a directory)
is met, and otherwise is silent when it is not---this does not help
debugging.
Be more explicit and state that we expect the path to become a file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano