It was positioned incorrectly (offset by one position)
if the menu had a tear-off handle.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Assume that we want to commit these states:
Old state == HEAD Intermediate state New state
--------------------------------------------------------
context before context before context before
old 1 new 1 new 1
old 2 old 2 new 2
context after context after context after
that is, want to commit two changes in this order:
1. transform "old 1" into "new 1"
2. transform "old 2" into "new 2"
[This discussion and this patch is about this very case and one other case
as outlined below; any other intermediate states that one could imagine are
not affected by this patch.]
Now assume further, that we have not staged and commited anything, but we
have already changed the working file to the new state. Then we will see
this hunk in the "Unstaged Changes":
@@ -1,4 +1,4 @@
context before
-old 1
-old 2
+new 1
+new 2
context after
The obvious way to stage the intermediate state is to apply "Stage This
Line" to "-old 1" and "+new 1". Unfortunately, this resulted in this
intermediate state:
context before
old 2
new 1
context after
which is not what we wanted. In fact, it was impossible to stage the
intermediate state using "Stage Line". The crux was that if a "+" line was
staged, then the "-" lines were converted to context lines and arranged
*before* the "+" line in the forged hunk that we fed to 'git apply'.
With this patch we now treat "+" lines that are staged differently. In
particular, the "-" lines before the "+" block are moved *after* the
staged "+" line. Now it is possible to get the correct intermediate state
by staging "-old 1" and "+new 1". Problem solved.
But there is a catch.
Noticing that we didn't get the right intermediate state by staging
"-old 1" and "+new 1", we could have had the idea to stage the complete
hunk and to *unstage* "-old 2" and "+new 2". But... the result is the same.
The reason is that there is the exact symmetric problem with unstaging the
last "-" and "+" line that are in adjacent blocks of "-" and "+" lines.
This patch does *not* change the way in which "-" lines are *unstaged*.
Why? Because if we did (i.e. move "+" lines before the "-" line after
converting them to context lines), then it would be impossible to stage
this intermediate state:
context before
old 1
new 2
context after
that is, it would be impossible to stage the two independet changes in the
opposite order.
Let's look at this case a bit further: The obvious way to get this
intermediate state would be to apply "Stage This Line" to "-old 2" and
"+new 2". Before this patch, this worked as expected. With this patch, it
does not work as expected, but it can still be achieved by first staging
the entire hunk, then *unstaging* "-old 1" and "+new 1".
In summary, this patch makes a common case possible, at the expense that
a less common case is made more complicated for the user.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
To "Stage/Unstage Line" we construct a patch that contains exactly one
change (either addition or removal); the hunk header was forged by counting
the old side and adjusting the count by +/-1 for the new side. But when we
counted the context we never counted the changed line itself. If the hunk
had only one removal line and one line of context, like this:
@@ -1,3 +1,2 @@
context 1
-removal
context 2
We had constructed this patch:
@@ -1,2 +1,1 @@
context 1
-removal
context 2
which does not apply because git apply deduces that it must apply at the
end of the file. ("context 2" is considered garbage and ignored.) The fix
is that removal lines must be counted towards the context of the old side.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In Git 1.6 and later gitk is in $prefix/bin while git-gui and all
of the other commands are in $gitexecdir, which is typically not
the same as $prefix/bin. So we cannot launch $gitexecdir/gitk and
expect it to actually start gitk properly.
By allowing git-gui to locate the script via $PATH and then using
exactly that path when we source it during the application start
we can correctly run gitk on any Git 1.5 or later.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Add a context menu item to invoke blame -C -C -C on a chunk
of the file. The results are used to update the 'original
location' column of the blame display.
The chunk is computed as the smallest line range that covers
both the 'last change' and 'original location' ranges of the
line that was clicked to open the menu.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Currently 'git-gui blame' does not kill its back-end
process, hoping that it will die anyway when the pipe
is closed. However, in some cases the process works
for a long time without producing any output. This
behavior results in a runaway CPU hog.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
On huge repositories, -C -C can be way too slow to be
unconditionally enabled, and it can also be useful to control
its precision.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Apply the work-around for checking the executable
permission of hook files not only on Cygwin, but on
Windows in general.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now that MERGE_RR was moved out of .git/rr-cache/, we have to delete
it somewhere else. Just in case somebody wants to use a newer git-gui
with an older Git, the file .git/rr-cache/MERGE_RR is removed, too (if
it exists).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now, as in all OSX apps, there is only one quit menu entry.
It's automatically in the wish menu and calls ::tk::mac::Quit when used.
Signed-off-by: Soeren Finster <sf@9by6.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This adds a context menu entry below "Stage/Unstage Hunk" that stages or
unstages just the line under the mouse pointer.
This is by itself useful, for example, if there are unrelated changes in
the same hunk and the hunk cannot be split by reducing the context.
The feature can also be used to split a hunk by staging a number of
additions (or unstaging a number of removals) until there are enough
context lines that the hunk gets split.
The implementation reads the complete hunk that the line lives in, and
constructs a new hunk by picking existing context lines, removing unneeded
change lines and transforming other change lines to context lines. The
resulting hunk is fed through 'git apply' just like in the "Stage/Unstage
Hunk" case.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Johannes Sixt noticed that if the last file in the list was staged, my
earlier patch would display the diff for the penultimate file, but show
the file _before_ that as being selected.
This was due to my misunderstanding the lno argument to show_diff.
This patch fixes the problem: lno is not decremented in the special case
to handle the last item in the list (though we still need to use $lno-1
to find the right path for the next diff).
Signed-off-by: Abhijit Menon-Sen <ams@toroid.org>
Tested-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If a text widget is asked the index at x,y with y == 0 or y == 1 it will
always return 1.0 as the nearest index, regardless of the x position.
This means that clicking the top 2 pixels of the Unstaged/Staged Changes
lists caused the state of the file there to be toggled. This patch
checks that the pixel clicked is greater than 1, so there is less chance
of accidentally staging or unstaging changes.
Signed-off-by: Richard Quirk <richard.quirk@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Suppose the "Unstaged Changes" pane contains a list of files, and one of
them is selected (i.e., that diff is currently being displayed). If one
clicks on the icon to stage the change, git-gui clears the diff and one
has to click on another filename to see the next diff in the list.
This patch changes that behaviour. If one clicks on the icon to stage
(or unstage) the file whose diff is being displayed, git-gui will move
on to the next filename in the list and display that diff instead of a
blank diff pane. If the selected file was at the end of the list, the
diff pane will display the previous diff instead; if the selected file
was the only one listed, the diff pane will become blank.
If no diff is currently being displayed, this patch changes nothing.
Signed-off-by: Abhijit Menon-Sen <ams@toroid.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In git-gui after clicking either on 'Create New Repository' or
'Open Existing Repository' the form elements aren't centered like
they are pretty much everywhere else in the app. At least when ran
on a mac, haven't checked on other platforms.
Using grid instead of pack seems to fix this.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the user has put nowinsymlinks into their CYGWIN environment
variable any symlinks created by a Cygwin process (e.g. ln -s)
will not have the ".lnk" suffix. In this case workdir is still
a workdir, but our detection of looking for "info.lnk" fails
as the symlink is actually a normal file called "info".
Instead we just always use Cygwin's test executable to see if
info/exclude is a file. If it is, we assume from there on it
can be read by git-ls-files --others and is thus safe to use
on the command line.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Often new Git users want to know what commands git-gui uses to make
changes, so they can learn the command line interface by mimicking
what git-gui does in response to GUI actions. Showing the direct
commands being executed is easy enough to implement but this is of
little value to end-users because git-gui frequently directly calls
plumbing, not porcelain.
Since the code is already written and tested, its fairly harmless
to include. It may not help a new end-user, but it can help with
debugging git-gui or reverse-engineering its logic to further make
changes to it or implement another GUI for Git.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we are deleting a local branch from refs/heads/ we need to
make sure any associated configuration stored in .git/config is
also removed (such as branch.$name.remote and branch.$name.merge).
The easiest way to do this is to use git-branch as that automatically
will look for and delete configuration keys as necessary.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When creating new branches if branch.autosetupmerge is not set, or
is set to true or always and we have been given a remote tracking
branch as the starting point for a new branch we want to create the
necessary configuration options in .git/config for the new branch
so that a no argument git-pull on the command line pulls from the
remote repository's branch.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Apparently aspell 0.50 does not recognize "$$cr master" as a command,
but instead tries to offer suggestions for how to correctly spell
the word "cr". This is not quite what we are after when we want
the name of the current dictionary.
Instead of locking up git-gui waiting for a response that may never
come back from aspell we avoid sending this command if the binary
we have started claims to be before version 0.60.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
On startup, git-gui warns if there are many loose objects. It does so by
saying, e.g., that there are "approximately 768 loose objects". But isn't
"768" a very accurate number? Lets say "750", which (while still being a
very precise number) sounds much more like an estimation.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
On some systems, brackets cannot be used as event details
(they don't have a keysym), so use +/- instead (both on
keyboard and keypad) and add ctrl-= as a synonym of ctrl-+
for convenience.
[sp: Had to change accelerator to show only "$M1T-="; the
original version included "$M1T-+ $M1T-=" but this is
not drawn at all on Mac OS X.]
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Bound to Ctrl/Cmd + left & right square brackets, depending on
your platform.
[sp: Added missing binds for . to allow shortcuts to work when
not focused in the commit message area.]
Signed-off-by: Jonathan del Strother <jon.delStrother@bestbefore.tv>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Keeping POT up to date relative to the software is absolutely
necessary. What is unwarranted is updating language files at
the same time by running msgmerge without checking if there is
any outstanding translation work first. If we assume that the
translators do not have access to msgmerge, that is a good service
to them (the less they have to do, the better), but otherwise,
it is better to be leave po/${language}.po files alone.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I updated Japanese translation for the latest git-gui.
Signed-off-by: しらいしななこ <nanako3@bluebottle.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Peter Karlsson pointed out there is no value in translating the
string "Apple", as this is used as the dummy label for the Apple
menu on Mac OS X systems.
The Apple menu is actually not the menu with the Apple corporate
logo, but the menu next to it, which shows the name of the
application and is typically called the application menu. Most users
of git-gui see this menu titled as "Git Gui". The actual label of
this menu comes from our Info.plist file and cannot be specified
by any other means. Translating this string in the Tcl PO files
is not necessary.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
To prepare msg files for Tcl scripts, the command that is set to MSGFMT
make variable needs to be able to grok "--tcl -l <lang> -d <here>" options
correctly. This patch simplifies the tests done in git-gui's Makefile to
directly test this condition. If the test run does not exit properly with
zero status (either because you do not have "msgfmt" itself, or your
"msgfmt" is too old to grok --tcl option --- the reason does not matter),
have it fall back to po/po2msg.sh
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The width of the commit message text area is currently hard-coded
to 75 characters. This value might be not optimal for some projects.
For instance users who would like to generate GNU-style ChangeLog
file from git commit message might prefer commit messages of width
no longer than 70 characters.
This patch adds a global and per repository option "Commit Message
Text Width", which could be used to change the width of the commit
message text area.
Signed-off-by: Adam Piątyszek <ediap@users.sourceforge.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In several places, only the background colour is set to an explicit
value, sometimes even "white". This does not work well with dark
colour themes.
This patch tries to set the foreground colour to "black" in those
situations, where an explicit background colour is set without defining
any foreground colour.
Signed-off-by: Philipp A. Hartmann <ph@sorgh.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
'make' shows:
MSGFMT po/zh_cn.msg 368 translated, 2 fuzzy, 1 untranslated message.
1. update the zh_cn.po and translate the remaining messages in chinese
2. correct some of the previously mis-translated messages
3. add a list of word interpretation in the head as a guideline for
subsequent updatings and translations
Signed-off-by: eric miao <eric.miao@marvell.com>
Acked-by: Xudong Guan <xudong.guan@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Mac OS X Tiger may have a msgfmt available but it doesn't understand
how to implement --tcl. Falling back to po2msg.sh on such systems
is a reasonable behavior.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the user tries to commit their changes without actually staging
anything we used to display an informational dialog suggesting they
first stage those changes, then retry the commit feature.
Unfortunately I broke this in aba15f7 ("Ensure error dialogs always
appear over all other windows") and failed to fix it in the paper
bag fix that came one day after it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
git-gui: Focus insertion point at end of strings in repository chooser
git-gui: Avoid hardcoded Windows paths in Cygwin package files
git-gui: Default TCL_PATH to same location as TCLTK_PATH
git-gui: Paper bag fix error dialogs opening over the main window
Alexander Gavrilov