Introduce the firmware and PNVM files for new device type
combinations, namely GL and MA HWs with Gf/Gf4 and Hr radio modules.
Hr radio doesn't require PNVM file.
Build number: Core80
Revision: d24e06ed
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
AMD PMF driver loads the PMF TA (Trusted Application) into the AMD
ASP's (AMD Security Processor) TEE (Trusted Execution Environment).
PMF Trusted Application is a secured firmware placed under
/lib/firmware/amdtee gets loaded only when the TEE environment is
initialized. This Firmware adds the initial support for PMF Smart
PC Solution Builder.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
This updates the pcie8997_wlan_v4.bin and pcieusb8997_combo_v4.bin FW files along with WHENCE file.
This fixes an issue where AP mode was not allowing more than one Ex-STA to associate.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add the -84 ucode firmwares for the currently supported hardware and
update the PNVM binaries.
Build number: Core_build_core81-65
Revision: 8e5c544c (so, ty)
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Audio drivers look for firmware based on the model string, in SoC
specific directory. Add soft link for this pointing to platform specific
firmware.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Add the firmware for the sensors DSP found on Qualcomm SM8250 platform.
Unlike the rest of DSP firmware, this particular firmware is
device-specific. This firmware was published for the Thundercomm RB5
kit aka Qualcomm Robotics RB5 platform.
- SLPI.HY.3.1-00032-SM8250AZL-1
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Platforms using qcm2290 and qrb4210 SoCs require the wlanmdsp.mbn file
to boot the WiFi core (similar to the sdm845 platforms). However these
platforms reject existing wlanmdsp.mbn. Provide a separate wlanmdsp.mbn
file to be used by these two platforms only.
- WLAN.HL.3.3.7.c2-00855-QCAHLSWMTPLZ-1
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To be used on Qualcomm Snapdragon QCM2290 / QRB2210 and SM6115 /
QRB4210, such as on the Qualcomm Robotics RB1 and RB2 platforms.
- VIDEO.VE.6.0-00049-PROD-1
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add Adreno zap shader, ADSP, CDSP and modem firmare for QRB4210 SoC. It
is used e.g. on Qualcomm Robotics RB2 platform.
- ADSP.VT.5.4.1.c4-00013-KAMORTA-2
- CDSP.VT.2.4.1-00265-KAMORTA-1
- MPSS.HA.1.1-00409-KD_ALL_PACK-1
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add Adreno zap shader, ADSP and modem firmare for QCM2290 / QRB2210 SoC.
It is used e.g. on Qualcomm Robotics RB1 platform.
- ADSP.VT.5.4.1.c4-00013-KAMORTA-1
- MPSS.HA.1.1-00409-KD_ALL_PACK-1
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The firmware file ath10k/WCN3990/hw1.0/wlanmdsp.mbn is platform-specific
(rather than being specific to the WiFi chip itself) and can be used
only on the Qualcomm SDM845 platform and close relatives. Other
platforms (e.g. Qualcomm QCM2290, QRB4210) are going to provie their own
copies of the wlanmdsp.mbn firmware.
As discussed with Kalle, move this file to the platform-specific folder,
providing the backwards-compatibility symlink.
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Don't compress qcom json files. They are loaded by the pd-mapper userspace
app which doesn't know about compression.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Replace old File/Raw entries with a single RawFile entry now that
copy-firmware and check_whence supports that.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
There were some releases of MTL DMC since the last update. We are
updating to v2.16 here, but see below release notes for each release.
Release notes for v2.16:
1. Bug fix for Debuggability DCN.
Release notes for v2.15:
1. Bug fix for HRR.
Release notes for v2.14:
1. Fix for HRR feature.
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
This patch updates the firmware file for Intel Bluetooth AX203
Also it is known as Intel JohnsonPeak (JnP2).
FW Build: REL68350
Release Version: 22.250.0.2
Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch updates the firmware file for Intel Bluetooth AX203
Also it is known as Intel JohnsonPeak (JnP2).
FW Build: REL68350
Release Version: 22.250.0.2
Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch updates the firmware file for Intel Bluetooth AX211
Also it is known as Intel GarfieldPeak (GfP2).
FW Build: REL68350
Release Version: 22.250.0.2
Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch updates the firmware file for Intel Bluetooth AX211
Also it is known as Intel GarfieldPeak (GfP2).
FW Build: REL68350
Release Version: 22.250.0.2
Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch updates the firmware file for Intel Bluetooth AX210
Also it is known as Intel TyphoonPeak (TyP2).
FW Build: REL68350
Release Version: 22.250.0.2
Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch updates the firmware file for Intel Bluetooth AX200
Also it is known as Intel CyclonePeak (CcP2).
FW Build: REL53497
Release Version: 22.250.0.2
Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch updates the firmware file for Intel Bluetooth AX201
Also it is known as Intel HarrisonPeak (HrP2).
FW Build: REL53497
Release Version: 22.250.0.2
Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Update AMD SEV firmware version 1.55 build 8 for AMD family 19h processors
with models in the range 00h to 0fh.
Add AMD SEV firmware version 1.55 build 21 for AMD family 19h processors
with models in the range 10h to 1fh.
Signed-off-by: John Allen <john.allen@amd.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
First GSC FW release for MTL.
Release: 102.0.0.1655
Compatibility (API) Version: 1.0
SVN: 1
The firmware file is named after the compatibility version, as that is
what the kernel driver cares about.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
This firmware is submitted for RTL8852C BT USB I/F.
Release version is 0x040D_7225
Due to the follow-up RTL8852C firmware patch is format v2,
the RTL8852C BT USB firmware updates will be launched
with rtl8852cu_fw_v2.bin.
Suggested-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Signed-off-by: Hilda Wu <hildawu@realtek.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add latest verified version of Nvidia Spectrum-family switch firmware,
for Spectrum (13.2012.1012), Spectrum-2 (29.2012.1012), Spectrum-3
(30.2012.1012) and Spectrum-4 (34.2012.1012).
Among a number of fixes and new features that this FW release brings, the
following are specifically relevant for the mlxsw driver:
- includes support for ACL IGNORE action's disable_security bit
- includes FW for the Spectrum-4 ASIC
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add the firmware for the sensors DSP found on Qualcomm SDM845/SDA845.
Unlike the rest of DSP firmware, this particular firmware is
device-specific. This firmware was published for the Thundercomm RB3
board aka db845c.
Firmware version:
- SLPI.HY.1.0-00365-SDM845AZL-1
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add the ddp-lag package, to be loaded by ice driver
in Link Aggregation (LAG) use case.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
The firmware was only ever referenced in the 6.0 kernel by
two firmware, for less than a month, by the 6.1 LTS kernel
those references had been updated to the new location.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
The firmware 3.16.1 has been released the 2023-05-02.
Here the last modifications (only modifications tagged [LMAC] have an
impact on Linux):
* [1670] - [LMAC] Fixed support for WDS 4 address frames
* [1813] - [LMAC] Fixed an error that was causing the scan complete
indication to be blocked
* [1832] - [UMAC] Fixed an issue blocking connection to specific Asus
routers
* [1820] - [UMAC] Added a new API to obtain Wi-Fi diagnostics
information
* [1825] - [UMAC] The TX rate mask can be applied in AP mode
* [1822] - [UMAC] Fixed an error that was causing access point packets
to be encrypted multiple times
* [1800] - [UMAC] Add an API to forward probe request when running in
AP mode
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Due to changes in the HuC auth flow via GuC, both binaries need to be
updated at the same time to keep compatibility.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Gregory Greenman