Align argument list and place opening brace on its own line.
Signed-off-by: Dimitrios Christidis <dimitrios@christidis.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is shorter, makes the logic a bit easier to follow, and is
perhaps a bit faster too.
The logic is to make the final decision only when "subject" is there,
its early part matches "match", and the match is at the slash
boundary (or the whole thing).
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When attempting to blame a non-existing path, git should show an error
message like this:
$ git blame e83c51633 -- nonexisting-file
fatal: no such path nonexisting-file in e83c51633
Since the recent commit 835c49f7d (blame: rework methods that
determine 'final' commit, 2017-05-24) the revision name is either
missing or some scrambled characters are shown instead. The reason is
that the revision name must be duplicated, because it is invalidated
when the pending objects array is cleared in the meantime, but this
commit dropped the duplication.
Restore the duplication of the revision name in the affected functions
(find_single_final() and find_single_initial()).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recent update broke an alias that contained an uppercase letter.
* js/alias-case-sensitivity:
alias: compare alias name *case-insensitively*
t1300: demonstrate that CamelCased aliases regressed
It turns out that Cygwin also needs the fopen() wrapper that
returns failure when a directory is opened for reading.
* rj/cygwin-fread-reads-directories:
config.mak.uname: set FREAD_READS_DIRECTORIES for cygwin
We started using "%" PRItime, imitating "%" PRIuMAX and friends, as
a way to format the internal timestamp value, but this does not
play well with gettext(1) i18n framework, and causes "make pot"
that is run by the l10n coordinator to create a broken po/git.pot
file. This is a possible workaround for that problem.
* jc/po-pritime-fix:
Makefile: help gettext tools to cope with our custom PRItime format
By declaring the task_cb parameter of type `void **`, the signature of
the get_next_task method suggests that the "task-specific cookie" can be
defined in that method, and the signatures of the start_failure and of
the task_finished methods declare that parameter of type `void *`,
suggesting that those methods are mere users of said cookie.
That convention makes a total lot of sense, because the tasks are pretty
much dead when one of the latter two methods is called: there would be
little use to reset that cookie at that point because nobody would be
able to see the change afterwards.
However, this is not what the code actually does. For all three methods,
it passes the *address* of pp->children[i].data.
As reasoned above, this behavior makes no sense. So let's change the
implementation to adhere to the convention suggested by the signatures.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "p4 -G" to make "p4 changes" output more Python-friendly
to parse.
* mt/p4-parse-G-output:
git-p4: filter for {'code':'info'} in p4CmdList
git-p4: parse marshal output "p4 -G" in p4 changes
git-p4: git-p4 tests with p4 triggers
A recent update made it easier to use "-fsanitize=" option while
compiling but supported only one sanitize option. Allow more than
one to be combined, joined with a comma, like "make SANITIZE=foo,bar".
* jk/build-with-asan:
Makefile: allow combining UBSan with other sanitizers
A recent update broke an alias that contained an uppercase letter.
* js/alias-case-sensitivity:
alias: compare alias name *case-insensitively*
t1300: demonstrate that CamelCased aliases regressed
When running gpg-relevant tests, a gpg-daemon is spawned for each
GNUPGHOME used. This daemon may stay running after the test and cache
file descriptors for the trash directories, even after the trash
directory is removed. This leads to ENOENT errors when attempting to
create files if tests are run multiple times.
Add a cleanup script to force flushing the gpg-agent for that GNUPGHOME
(if any) before setting up the GPG relevant-environment.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Santiago Torres <santiago@nyu.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 06bf4ad1d (push: propagate remote and refspec with
--recurse-submodules) push was taught how to propagate a refspec down to
submodules when the '--recurse-submodules' flag is given. The only refspecs
that are allowed to be propagated are ones which name a ref which exists
in both the superproject and the submodule, with the caveat that 'HEAD'
was disallowed.
This patch teaches push-check (the submodule helper which determines if
a refspec can be propagated to a submodule) to permit propagating 'HEAD'
if and only if the superproject and the submodule both have the same
named branch checked out and the submodule is not in a detached head
state.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "used" field in struct object is only used by builtin/fsck. Remove
that field and modify builtin/fsck to use a flag instead.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If obj->type == OBJ_TREE, an invocation of fsck_walk() will invoke
parse_tree() and return quickly if that returns nonzero, so it is of no
use for traverse_one_object() to invoke parse_tree() in this situation
before invoking fsck_walk(). Remove that code.
The behavior of traverse_one_object() is changed slightly in that it now
returns -1 instead of 1 in the case that parse_tree() fails, but this is
not an issue because its only caller (traverse_reachable) does not care
about the value as long as it is nonzero.
This code was introduced in commit 271b8d2 ("builtin-fsck: move away
from object-refs to fsck_walk", 2008-02-25). The same issue existed in
that commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If done_pbase_paths is NULL then done_pbase_paths_num must be zero and
done_pbase_path_pos() returns -1 without accessing the array, so the
check is not necessary.
If the invariant was violated then the check would make sure we keep
on going and allocate the necessary amount of memory in the next
ALLOC_GROW call. That sounds nice, but all array entries except for
one would contain garbage data.
If the invariant was violated without the check we'd get a segfault in
done_pbase_path_pos(), i.e. an observable crash, alerting us of the
presence of a bug.
Currently there is no such bug: Only the functions check_pbase_path()
and cleanup_preferred_base() change pointer and counter, and both make
sure to keep them in sync. Get rid of the check anyway to allow us to
see if later changes introduce such a defect, and to simplify the code.
Detected by Coverity Scan.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back when the modern http_options() codepath was created to parse
various http.* options at 29508e1e ("Isolate shared HTTP request
functionality", 2005-11-18), and then later was corrected for
interation between the multiple configuration files in 7059cd99
("http_init(): Fix config file parsing", 2009-03-09), we parsed
configuration variables like http.sslkey, http.sslcert as plain
vanilla strings, because git_config_pathname() that understands
"~[username]/" prefix did not exist. Later, we converted some of
them (namely, http.sslCAPath and http.sslCAInfo) to use the
function, and added variables like http.cookeyFile http.pinnedpubkey
to use the function from the beginning. Because of that, these
variables all understand "~[username]/" prefix.
Make the remaining two variables, http.sslcert and http.sslkey, also
aware of the convention, as they are both clearly pathnames to
files.
Noticed-by: Victor Toni <victor.toni@gmail.com>
Helped-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To note that merely cloning git.git without --recurse-submodules
doesn't get you a full copy of the code anymore. See
5f6482d642 ("RelNotes: mention "log: make --regexp-ignore-case work
with --perl-regexp"", 2017-07-20).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To inform users that they can use --regexp-ignore-case now, and that
existing scripts which relied on that + PCRE may be buggy. See
9e3cbc59d5 ("log: make --regexp-ignore-case work with --perl-regexp",
2017-05-20).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To inform users that they can use the short form now. See
7531a2dd87 ("log: add -P as a synonym for --perl-regexp", 2017-05-25).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We started using our own timestamp_t type and PRItime format
specifier to go along with it, so that we can later change the
underlying type and output format more easily, but this does not
play well with gettext tools.
Because gettext tools need to keep the *.po file portable across
platforms, they have to special-case the format specifiers like
PRIuMAX that are known types in inttypes.h, instead of letting CPP
handle strings like
"%" PRIuMAX " seconds ago"
as an ordinary string concatenation. They fundamentally cannot do
the same for our own custom type/format.
Given that po/git.pot needs to be generated only once every release
and by only one person, i.e. the l10n coordinator, let's update the
Makefile rule to generate po/git.pot so that gettext tools are run
on a munged set of sources in which all mentions of PRItime are
replaced with PRIuMAX, which is what we happen to use right now.
This way, developers do not have to care that PRItime does not play
well with gettext, and translators do not have to care that we use
our own PRItime.
The credit for the idea to munge the source files goes to Dscho.
Possible bugs are mine.
Helped-by: Jiang Xin <worldhello.net@gmail.com>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The paragraph that describes the 'scissors' cleanup mode of
'commit' had the 'cut-line' in the middle of a sentence. This
made it possible for the line to get wrapped on smaler windows.
This shouldn't be the case as it makes it hard for the user to
understand the structure of the cut-line.
Reformat the pragraph to make the 'cut-line' stand on a line of
it's own thus distinguishing it from the rest of the paragraph.
This further prevents it from getting wrapped to some extent.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We run an early part of "git gc" that deals with refs before
daemonising (and not under lock) even when running a background
auto-gc, which caused multiple gc processes attempting to run the
early part at the same time. This is now prevented by running the
early part also under the GC lock.
* jk/gc-pre-detach-under-hook:
gc: run pre-detach operations under lock
Code clean-up, that makes us in sync with Debian by one patch.
* jn/hooks-pre-rebase-sample-fix:
pre-rebase hook: capture documentation in a <<here document
The progress meter did not give a useful output when we haven't had
0.5 seconds to measure the throughput during the interval. Instead
show the overall throughput rate at the end, which is a much more
useful number.
* rs/progress-overall-throughput-at-the-end:
progress: show overall rate in last update
On Cygwin, similar to Windows, "git push //server/share/repository"
ought to mean a repository on a network share that can be accessed
locally, but this did not work correctly due to stripping the double
slashes at the beginning.
This may need to be heavily tested before it gets unleashed to the
wild, as the change is at a fairly low-level code and would affect
not just the code to decide if the push destination is local. There
may be unexpected fallouts in the path normalization.
* tb/push-to-cygwin-unc-path:
cygwin: allow pushing to UNC paths
gitweb terminates and shows no project list, if it can not access a
sub-directory in the project root directory while looking for projects
to show.
Work it around by skipping unreadable directories.
Signed-off-by: Hielke Christian Braun <hcb@unco.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dimitrios Christidis