The plumbing output is sacred as it is an API. We _could_ change it if it
is broken in such a way that it cannot convey necessary information fully,
but we just do not _reword_ for the sake of rewording. If somebody does
not like it, s/he is complaining too late. S/he should have been here in
early May 2005 and make the language used by the API closer to what humans
read. S/he wasn't here. Too bad, and it is too late.
And people who complain should look at a bigger picture. Look at what was
suggested by one of them and think for five seconds:
$ git checkout mytopic
-fatal: Entry 'frotz' not uptodate. Cannot merge.
+fatal: Entry 'frotz' has local changes. Cannot merge.
If you do not see something wrong with this output, your brain has already
been rotten with use of git for too long a time. Nobody asked us to
"merge" but why are we talking about "Cannot merge"?
This patch introduces a mechanism to allow Porcelains to specify messages
that are different from the ones that is given by the underlying plumbing
implementation of read-tree, so that we can reword the message Porcelains give
without disrupting the output from the plumbing.
$ git-checkout pu
error: You have local changes to 'Makefile'; cannot switch branches.
There are other places that ask unpack_trees() to n-way merge, detect
issues and let it issue error message on its own, but I did this as a
demonstration and replaced only one message.
Yes I know about C99 structure initializers. I'd love to use them but we
try to be nice to compilers without it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
NO_MKDTEMP is required to build, FREAD_READS_DIRECTORIES and the definition
of _LARGE_FILES fix test suite failures and INTERNAL_QSORT is required for
adequate performance.
Tested on AIX v5.3 Maintenance Level 06
Signed-off-by: Mike Ralphson <mike@abacus.co.uk>
Tested-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The in-place mode of sed used in t7502-commit is a non-POSIX extension.
That call of sed is replaced by a more portable version using a temporary file.
Signed-off-by: Marcel Koeppen <git-dev@marzelpan.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a submodule is not initialized and you do not want to change the
defaults from .gitmodules anyway, you can now say
$ git submodule update --init <name>
When "update" is called without --init on an uninitialized submodule,
a hint to use --init is printed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a cmd_merge() function in fast-import that will conflict with
builtin-merge's cmd_merge() function. To keep it consistent, rename all
cmd_*() function to parse_*()
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change "brower.konqueror.path" to "browser.konqueror.path" in
documentation.
Signed-off-by: Teemu Likonen <tlikonen@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git config' has a '-f' option that takes the file to parse.
Using it rather than the environment variable seems more logical
and simplified.
Signed-off-by: Imran M Yousuf <imyousuf@smartitengineering.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://repo.or.cz/git-gui:
git-gui: Delete branches with 'git branch -D' to clear config
git-gui: Setup branch.remote,merge for shorthand git-pull
git-gui: Update German translation
git-gui: Don't use '$$cr master' with aspell earlier than 0.60
git-gui: Report less precise object estimates for database compression
Clarifies the git-prune man page, documenting that it only
prunes unpacked objects.
Signed-off-by: Chris Frey <cdfrey@foursquare.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://git.kernel.org/pub/scm/gitk/gitk: (44 commits)
gitk: Add a progress bar for checking out a head
gitk: Show current row number and total number of rows
gitk: Allow users to view diffs in external diff viewer
gitk: Synchronize highlighting in file view for 'f' and 'b' commands
gitk: Make updates go faster
gitk: Disable "Reset %s branch to here" when on a detached head
gitk: German translation again updated
gitk: Update German translation
gitk: Makefile/install: force permissions when installing files and dirs
gitk: Initial Swedish translation.
gitk: Spanish translation of gitk
gitk: Fix handling of tree file list with special chars in names
gitk: Reorganize processing of arguments for git log
gitk: Fix problem with target row not being in scroll region
gitk: Avoid a crash in selectline if commitinfo($id) isn't set
gitk: Fix some corner cases in computing vrowmod and displayorder
gitk: Correct a few strings and comments to say "git log"
gitk: Don't filter view arguments through git rev-parse
gitk: Fix problems with target row stuff
gitk: Handle updating with path limiting better
...
* sb/committer:
commit: Show committer if automatic
commit: Show author if different from committer
Preparation to call determine_author_info from prepare_to_commit
* bd/tests:
Rename the test trash directory to contain spaces.
Fix tests breaking when checkout path contains shell metacharacters
Don't use the 'export NAME=value' in the test scripts.
lib-git-svn.sh: Fix quoting issues with paths containing shell metacharacters
test-lib.sh: Fix some missing path quoting
Use test_set_editor in t9001-send-email.sh
test-lib.sh: Add a test_set_editor function to safely set $VISUAL
git-send-email.perl: Handle shell metacharacters in $EDITOR properly
config.c: Escape backslashes in section names properly
git-rebase.sh: Fix --merge --abort failures when path contains whitespace
Conflicts:
t/t9115-git-svn-dcommit-funky-renames.sh
* mv/format-cc:
Add tests for sendemail.cc configuration variable
git-send-email: add a new sendemail.cc configuration variable
git-format-patch: add a new format.cc configuration variable
filter-branch tries to restore "old" copies of some
environment variables by using the construct:
unset var
test -z "$old_var" || var="$old_var" && export var
This is just wrong. AND-list and OR-list operators && and || have equal
precedence and they bind left to right. The second term, var="$old"
assignment always succeeds, so we always end up exporting var.
On bash and dash, exporting an unset variable has no effect. However, on
some shells (such as FreeBSD's /bin/sh), the shell exports the empty
value.
This manifested itself in this case as git-filter-branch setting
GIT_INDEX_FILE to the empty string, which in turn caused its call to
git-read-tree to fail, leaving the working tree pointing at the original
HEAD instead of the rewritten one.
To fix this, we change the short-circuit logic to better match the intent:
test -z "$old_var" || {
var="$old_var" && export var
}
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using /bin/sh from FreeBSD 6.1, the value of $? is lost
when calling a function inside the 'trap' action. This
resulted in clone erroneously indicating success when it
should have reported failure.
As a workaround, we save the value of $? before calling any
functions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output of 'tar tv' varies from system to system. In
particular, the t5000 was expecting to parse the date from
something like:
-rw-rw-r-- root/root 0 2008-05-13 04:27 file
but FreeBSD's tar produces this:
-rw-rw-r-- 0 root root 0 May 13 04:27 file
Instead of relying on tar's output, let's just extract the
file using tar and stat the result using perl.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On some shells (notably /bin/sh on FreeBSD 6.1), the
construct
foo && ! bar | baz
is true if
foo && baz
whereas for most other shells (such as bash) is true if
foo && ! baz
We can work around this by specifying
foo && ! (bar | baz)
which works everywhere.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that git checkout reports progress when checking out files, we
can use that to provide a progress bar in gitk. We re-use the green
progress bar (formerly used when reading stuff in) for that.
Signed-off-by: Paul Mackerras <paulus@samba.org>
* maint:
wt-status.h: declare global variables as extern
builtin-commit.c: add -u as short name for --untracked-files
git-repack: re-enable parsing of -n command line option
* maint-1.5.4:
wt-status.h: declare global variables as extern
builtin-commit.c: add -u as short name for --untracked-files
git-repack: re-enable parsing of -n command line option
* lt/core-optim:
Optimize symlink/directory detection
Avoid some unnecessary lstat() calls
is_racy_timestamp(): do not check timestamp for gitlinks
diff-lib.c: rename check_work_tree_entity()
diff: a submodule not checked out is not modified
Add t7506 to test submodule related functions for git-status
t4027: test diff for submodule with empty directory
Make git-add behave more sensibly in a case-insensitive environment
When adding files to the index, add support for case-independent matches
Make unpack-tree update removed files before any updated files
Make branch merging aware of underlying case-insensitive filsystems
Add 'core.ignorecase' option
Make hash_name_lookup able to do case-independent lookups
Make "index_name_exists()" return the cache_entry it found
Move name hashing functions into a file of its own
Make unpack_trees_options bit flags actual bitfields
Before this patch, when "git rev-parse --verify" was passed at least one
good rev and then anything, it would output something for the good rev
even if it would latter exit on error.
With this patch, we only output something if everything is ok.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this patch, something like:
$ git rev-parse --verify HEAD --default master
did not work, while:
$ git rev-parse --default master --verify HEAD
worked.
This patch fixes that, so that they both work (assuming
HEAD and master can be parsed).
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch documents the current behavior of "git rev-parse --verify".
This command is tested both with and without the "--quiet" and
"--default" options.
This shows some problems with the current behavior that will be fixed
in latter patches:
- in case of errors, there should be no good rev output on
stdout,
- with "--default" one test case is broken
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn blame produced output in the format of git blame; in environments
where there are scripts that read the output of svn blame, it's useful
to be able to use them with the output of git-svn. The git-compatible
format is still available using the new "--git-format" option.
This also fixes a bug in the initial git-svn blame implementation; it was
bombing out on uncommitted local changes.
Signed-off-by: Steven Grimm <koreth@midwinter.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When run from the command line, ECMerge does not automatically use the same
settings for a merge / diff that it would use when starting the GUI and loading
files manually. In the first case the built-in factory defaults would be used,
while in the second case the settings the user has specified in the GUI would
be used, which can be misleading. Specifying the "--default" command line
option changes this behavior so that always the user specfified GUI settings
are used.
Signed-off-by: Sebastian Schuberth <sschuberth@visageimaging.com>
Tested-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new option --no-binary to git-format-patch so that no binary
changes are included in the generated patches, only notices that those
files changed. This generate patches that cannot be applied, but still
is useful for generating mails for code review purposes.
See also: commit e47f306d4b, where --binary
option was turned on by default.
Signed-off-by: Caio Marcelo de Oliveira Filho <cmarcelo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are linkers out there that complain if a global non-static variable
is defined multiple times.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the C code consistent with the documentation and the old shell
code.
Signed-off-by: Sitaram Chamarty <sitaramc@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 5715d0b (Migrate git-repack.sh to use git-rev-parse --parseopt,
2007-11-04), parsing of the '-n' command line option was accidentally lost
when git-repack.sh was migrated to use git-rev-parse --parseopt. This adds
it back.
Signed-off-by: A Large Angry SCM <gitzilla@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change cd67e4d4 introduced a new configuration parameter that told
pull to automatically perform a rebase instead of a merge. This
change provides a configuration option to enable this feature
automatically when creating a new branch.
If the variable branch.autosetuprebase applies for a branch that's
being created, that branch will have branch.<name>.rebase set to true.
Signed-off-by: Dustin Sallings <dustin@spy.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this, git svn clone -s http://svn.gnome.org/svn/gtk+
is successful.
Also modified the funky rename test for this, which _does_
include escaped '+' signs for HTTP URLs. SVN seems to accept
either "+" or "%2B" in filenames and directories (just not the
main URL), so I'll leave it alone for now.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also fix an underallocation in walker.c::interpret_target().
Signed-off-by: Krzysztof Kowalczyk <kkowalczyk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a couple of fields in the bar just below the upper panes
that show the row number of the currently selected commit, and how
many rows are displayed in total. The latter increments as commits
are read in, and thus functions to show that progress is being made.
This therefore also removes the code that showed progress using a
green oscillating bar in the progress bar window (which some people
disliked).
Signed-off-by: Paul Mackerras <paulus@samba.org>
This is the base for making symlink detection in the middle fo a pathname
saner and (much) more efficient.
Under various loads, we want to verify that the full path leading up to a
filename is a real directory tree, and that when we successfully do an
'lstat()' on a filename, we don't get a false positive due to a symlink in
the middle of the path that git should have seen as a symlink, not as a
normal path component.
The 'has_symlink_leading_path()' function already did this, and cached
a single level of symlink information, but didn't cache the _lack_ of a
symlink, so the normal behaviour was actually the wrong way around, and we
ended up doing an 'lstat()' on each path component to check that it was a
real directory.
This caches the last detected full directory and symlink entries, and
speeds up especially deep directory structures a lot by avoiding to
lstat() all the directories leading up to each entry in the index.
[ This can - and should - probably be extended upon so that we eventually
never do a bare 'lstat()' on any path entries at *all* when checking the
index, but always check the full path carefully. Right now we do not
generally check the whole path for all our normal quick index
revalidation.
We should also make sure that we're careful about all the invalidation,
ie when we remove a link and replace it by a directory we should
invalidate the symlink cache if it matches (and vice versa for the
directory cache).
But regardless, the basic function needs to be sane to do that. The old
'has_symlink_leading_path()' was not capable enough - or indeed the code
readable enough - to really do that sanely. So I'm pushing this as not
just an optimization, but as a base for further work. ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit sequence used to do
if (file_exists(p->path))
add_file_to_cache(p->path, 0);
where both "file_exists()" and "add_file_to_cache()" needed to do a
lstat() on the path to do their work.
This cuts down 'lstat()' calls for the partial commit case by two
for each path we know about (because we do this twice per path).
Just move the lstat() to the caller instead (that's all that
"file_exists()" really does), and pass the stat information down to the
add_to_cache() function.
This essentially makes 'add_to_index()' the core function that adds a path
to the index, getting the index pointer, the pathname and the stat
information as arguments. There are then shorthand helper functions that
use this core function:
- 'add_to_cache()' is just 'add_to_index()' with the default index
- 'add_file_to_cache/index()' is the same, but does the lstat() call
itself, so you can pass just the pathname if you don't already have the
stat information available.
So old users of the 'add_file_to_xyzzy()' are essentially left unchanged,
and this just exposes the more generic helper function that can take
existing stat information into account.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* py/diff-submodule:
is_racy_timestamp(): do not check timestamp for gitlinks
diff-lib.c: rename check_work_tree_entity()
diff: a submodule not checked out is not modified
Add t7506 to test submodule related functions for git-status
t4027: test diff for submodule with empty directory
* lt/case-insensitive:
Make git-add behave more sensibly in a case-insensitive environment
When adding files to the index, add support for case-independent matches
Make unpack-tree update removed files before any updated files
Make branch merging aware of underlying case-insensitive filsystems
Add 'core.ignorecase' option
Make hash_name_lookup able to do case-independent lookups
Make "index_name_exists()" return the cache_entry it found
Move name hashing functions into a file of its own
Make unpack_trees_options bit flags actual bitfields
This allows gitk to run an external diff viewer such as meld.
Right-click on a file in the file list view gives "External diff"
popup menu entry, which launches the selected external diff tool.
The menu entry is only active in "Patch" mode, not in "Tree" mode.
The program to run to display the diff is configurable through
Edit/Preference/External diff tool. The program is run with two
arguments, being the names of files containing the two versions to
diff. Gitk will create temporary directories called
.gitk-tmp.<pid>/<n> to place these files in, and remove them when
it's finished.
If the file doesn't exist in one or other revision, gitk will supply
/dev/null as the name of the file on that side of the diff. This may
need to be adjusted for Windows or MacOS.
[paulus@samba.org - cleaned up and rewrote some parts of the patch.]
Signed-off-by: Thomas Arcila <thomas.arcila@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This is based on a patch by Eric Raible <raible@gmail.com>, but does
things a bit more simply.
Previously, 'b', backspace, and delete all did the same thing.
This changes 'b' to perform the inverse of 'f'. And both of
them now highlight the filename of the currently diff.
This makes it easier to review and navigate the diffs associated
with a particular commit using only f, b, and space because the
filename of the currently display diff will be dynamically
highlighted.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Junio C Hamano