Add jobs that exercise Git on Windows. Unfortunately, building and
especially testing Git on Windows is inherently slower compared to other
Unix-like systems, mostly because spawning processes is way slower. We
thus use the same layout as we use in GitHub Actions, where we have one
build job, and then pass on the resulting build artifacts to ten test
jobs that split up the work across each other.
Unfortunately, the GitLab runners for Windows machines are embarassingly
slow by themselves. So while this strategy leads to around 20 minutes of
build time in GitHub Actions, the same pipeline takes around an hour in
GitLab CI. Still, having late coverage is certainly better than having
none at all.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We're about to add a couple of jobs for Windows. As the Windows runners
are quite slow, we will split those up across two stages: one stage to
build the artifacts, and one stage that runs test slices in parallel.
Introduce stages and "needs" dependencies for the preexisting jobs as a
preparatory step. The stages will lead to a more natural representation
of jobs in the UI, whereas the "needs" dependency ensures that jobs do
not have to wait for all jobs in the preceding stage to finish.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We try to abstract away any differences between different CI platforms
in "ci/lib.sh", such that knowledge specific to e.g. GitHub Actions or
GitLab CI is neatly encapsulated in a single place. Next to some generic
variables, we also set up some variables that are specific to the actual
platform that the CI operates on, e.g. Linux or macOS.
We do not yet support Windows runners on GitLab CI. Unfortunately, those
systems do not use the same "CI_JOB_IMAGE" environment variable as both
Linux and macOS do. Instead, we can use the "OS" variable, which should
have a value of "Windows_NT" on Windows platforms.
Handle the combination of "$OS,$CI_JOB_IMAGE" and introduce support for
Windows.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to build and test Git, we have to first set up the Git for
Windows SDK, which contains various required tools and libraries. The
SDK is basically a clone of [1], but that repository is quite large due
to all the binaries it contains. We thus use both shallow clones and
sparse checkouts to speed up the setup. To handle this complexity we use
a GitHub action that is hosted externally at [2].
Unfortunately, this makes it rather hard to reuse the logic for CI
platforms other than GitHub Actions. After chatting with Johannes
Schindelin we came to the conclusion that it would be nice if the Git
for Windows SDK would regularly publish releases that one can easily
download and extract, thus moving all of the complexity into that single
step. Like this, all that a CI job needs to do is to fetch and extract
the resulting archive. This published release comes in the form of a new
"ci-artifacts" tag that gets updated regularly [3].
Implement a new script that knows how to fetch and extract that script
and convert GitHub Actions to use it.
[1]: https://github.com/git-for-windows/git-sdk-64/
[2]: https://github.com/git-for-windows/setup-git-for-windows-sdk/
[3]: https://github.com/git-for-windows/git-sdk-64/releases/tag/ci-artifacts/
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows by default has a restriction in place to only allow paths up to
260 characters. This restriction can nowadays be lifted by setting a
registry key, but is still active by default.
In t7300 we have one test that exercises the behaviour of git-clean(1)
with such long paths. Interestingly enough, this test fails on my system
that uses Windows 10 with mingw-w64 installed via MSYS2: instead of
observing ENAMETOOLONG, we observe ENOENT. This behaviour is consistent
across multiple different environments I have tried.
I cannot say why exactly we observe a different error here, but I would
not be surprised if this was either dependent on the Windows version,
the version of MinGW, the current working directory of Git or any kind
of combination of these.
Work around the issue by handling both errors.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
macOS with fsmonitor daemon can hang forever when a submodule is
involved, which has been corrected.
* kn/osx-fsmonitor-with-submodules-fix:
fsmonitor OSX: fix hangs for submodules
Usability improvements for running tests in leak-checking mode.
* jk/test-lsan-improvements:
test-lib: check for leak logs after every test
test-lib: show leak-sanitizer logs on --immediate failure
test-lib: stop showing old leak logs
In 6241ce2170 (refs/reftable: reload locked stack when preparing
transaction, 2024-09-24) we have introduced a new test that exercises
how the reftable backend behaves with many concurrent writers all racing
with each other. This test was introduced after a couple of fixes in
this context that should make concurrent writes behave gracefully. As it
turns out though, Windows systems do not yet handle concurrent writes
properly, as we've got two reports for Cygwin and MinGW failing in this
newly added test.
The root cause of this is how we update the "tables.list" file: when
writing a new stack of tables we first write the data into a lockfile
and then rename that file into place. But Windows forbids us from doing
that rename when the target path is open for reading by another process.
And as the test races both readers and writers with each other we are
quite likely to hit this edge case.
This is not a regression: the logic didn't work before the mentioned
commit, and after the commit it performs well on Linux and macOS, and
the situation on Windows should have at least improved a bit. But the
test shows that we need to put more thought into how to make this work
properly there.
Work around the issue by disabling the test on Windows for now. While at
it, increase the locking timeout to address reported timeouts when using
either the address or memory sanitizer, which also tend to significantly
extend the runtime of this test.
This should be revisited after Git v2.47 is out.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fsmonitor_classify_path_absolute() expects state->path_gitdir_watch.buf
has no trailing '/' or '.' For a submodule, fsmonitor_run_daemon() sets
the value with trailing "/." (as repo_get_git_dir(the_repository) on
Darwin returns ".") so that fsmonitor_classify_path_absolute() returns
IS_OUTSIDE_CONE.
In this case, fsevent_callback() doesn't update cookie_list so that
fsmonitor_publish() does nothing and with_lock__mark_cookies_seen() is
not invoked.
As with_lock__wait_for_cookie() infinitely waits for state->cookies_cond
that with_lock__mark_cookies_seen() should unlock, the whole daemon
hangs.
Remove trailing "/." from state->path_gitdir_watch.buf for submodules
and add a corresponding test in t7527-builtin-fsmonitor.sh. The test is
disabled for MINGW because hangs treated with this patch occur only for
Darwin and there is no simple way to terminate the win32 fsmonitor
daemon that hangs.
Suggested-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Koji Nakamaru <koji.nakamaru@gree.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 253ed9ecff (hash.h: scaffolding for _unsafe hashing variants,
2024-09-26) introduced the concept of having two hash algorithms: a safe
and an unsafe one. When the Makefile knobs do not explicitly request an
unsafe one, we fall back to using the safe algorithm.
However, the fallback to do so forgot one case: we should inherit the
NEEDS_CLONE_HELPER flag from the safe variant. Failing to do so means
that we'll end up defining two clone functions (the algorithm specific
one, and the generic one that just calls memcpy). You'll see an error
like this:
$ make OPENSSL_SHA1=1
[...]
sha1/openssl.h:46:29: error: redefinition of ‘openssl_SHA1_Clone’
46 | #define platform_SHA1_Clone openssl_SHA1_Clone
| ^~~~~~~~~~~~~~~~~~
hash.h:83:40: note: in expansion of macro ‘platform_SHA1_Clone’
83 | # define platform_SHA1_Clone_unsafe platform_SHA1_Clone
| ^~~~~~~~~~~~~~~~~~~
hash.h:101:33: note: in expansion of macro ‘platform_SHA1_Clone_unsafe’
101 | # define git_SHA1_Clone_unsafe platform_SHA1_Clone_unsafe
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
hash.h:133:20: note: in expansion of macro ‘git_SHA1_Clone_unsafe’
133 | static inline void git_SHA1_Clone_unsafe(git_SHA_CTX_unsafe *dst,
| ^~~~~~~~~~~~~~~~~~~~~
sha1/openssl.h:37:20: note: previous definition of ‘openssl_SHA1_Clone’ with type ‘void(struct openssl_SHA1_CTX *, const struct openssl_SHA1_CTX *)’
37 | static inline void openssl_SHA1_Clone(struct openssl_SHA1_CTX *dst,
| ^~~~~~~~~~~~~~~~~~
This only matters when compiling with openssl as the "safe" variant,
since it's the only algorithm that requires a clone helper (and even
then, only if you are using openssl 3.0+). And you should never do that,
because it's not safe. But still, the invocation above used to work and
should continue to do so until we decide to require a
collision-detecting variant for the safe algorithm entirely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error message added by 296743a7ca (archive: load index before
pathspec checks, 2024-09-21) is misleading: unpack_trees() is not
touching the working tree at all here, but just loading a tree into
the index. Correct it.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since DEVELOPER=YesPlease build enables -Wunused-parameter warnings
these days, the fallback definition for reencode_string_len() that
did not touch any of its parameters but one needs to be annotated
properly.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The checksum at the tail of files are now computed without
collision detection protection. This is safe as the consumer of
the information to protect itself from replay attacks checks for
hash collisions independently.
* tb/weak-sha1-for-tail-sum:
csum-file.c: use unsafe SHA-1 implementation when available
Makefile: allow specifying a SHA-1 for non-cryptographic uses
hash.h: scaffolding for _unsafe hashing variants
sha1: do not redefine `platform_SHA_CTX` and friends
pack-objects: use finalize_object_file() to rename pack/idx/etc
finalize_object_file(): implement collision check
finalize_object_file(): refactor unlink_or_warn() placement
finalize_object_file(): check for name collision before renaming
Patrick Steinhardt