Browse Source

uboot-tools and arm-image-installer added

Signed-off-by: tuibuilder_pel7x64builder0 <tuibuilder@powerel.org>
master
tuibuilder_pel7x64builder0 2 years ago
parent
commit
7d41c9785f
  1. 86
      SOURCES/aarch64-boards
  2. 886
      SOURCES/rockchip-Add-initial-support-for-the-PinePhone-Pro.patch
  3. 96
      SOURCES/rpi-Enable-using-the-DT-provided-by-the-Raspberry-Pi.patch
  4. 228
      SOURCES/rpi-bcm2835_sdhost-firmware-managed-clock.patch
  5. 77
      SOURCES/rpi-fallback-to-max-clock-for-mmc.patch
  6. 84
      SOURCES/uefi-distro-load-FDT-from-any-partition-on-boot-device.patch
  7. 236
      SPECS/arm-image-installer.spec
  8. 479
      SPECS/uboot-tools.spec

86
SOURCES/aarch64-boards

@ -0,0 +1,86 @@
a64-olinuxino
amarula_a64_relic
apple_m1
bananapi_m2_plus_h5
bananapi_m64
beelink_gs1
dragonboard410c
dragonboard820c
evb-rk3328
evb-rk3399
ficus-rk3399
firefly-rk3399
geekbox
hikey
khadas-edge-captain-rk3399
khadas-edge-rk3399
khadas-edge-v-rk3399
khadas-vim
khadas-vim2
khadas-vim3
khadas-vim3l
leez-rk3399
libretech-ac
libretech_all_h3_cc_h5
libretech_all_h3_it_h5
libretech_all_h5_cc_h5
libretech-cc
mvebu_espressobin-88f3720
mvebu_mcbin-88f8040
nanopc-t4-rk3399
nanopi_a64
nanopi-k2
nanopi-m4-2gb-rk3399
nanopi-m4b-rk3399
nanopi-m4-rk3399
nanopi_neo2
nanopi-neo4-rk3399
nanopi_neo_plus2
nanopi_r1s_h5
nanopi-r2s-rk3328
nanopi-r4s-rk3399
odroid-c2
orangepi_3
orangepi_lite2
orangepi_one_plus
orangepi_pc2
orangepi_prime
orangepi-rk3399
orangepi_win
orangepi_zero2
orangepi_zero_plus
orangepi_zero_plus2
p212
p2371-2180
p2771-0000-500
p3450-0000
pine64-lts
pine64_plus
pinebook
pinebook-pro-rk3399
pinephone-pro-rk3399
pine_h64
pinephone
pinetab
poplar
puma-rk3399
roc-cc-rk3328
rock64-rk3328
rock960-rk3399
rock-pi-4c-rk3399
rock-pi-4-rk3399
rock-pi-e-rk3328
rock-pi-n10-rk3399pro
rockpro64-rk3399
roc-pc-mezzanine-rk3399
roc-pc-rk3399
rpi_3
rpi_4
rpi_arm64
starqltechn
sopine_baseboard
tanix_tx6
teres_i
turris_mox
vexpress_aemv8a_juno
xilinx_zynqmp_virt

886
SOURCES/rockchip-Add-initial-support-for-the-PinePhone-Pro.patch

@ -0,0 +1,886 @@
From: Martijn Braam <martijn@brixit.nl>
Subject: [PATCH] rockchip: Add initial support for the PinePhone Pro
Date: Thu, 21 Oct 2021 19:18:43 +0200

This is a new device by PINE64 that's very similar to the Pinebook Pro
that's already supported.

Specification:
- Rockchip RK3399
- 4GB Dual-Channel LPDDR4
- 128GB eMMC
- mSD card slot
- AP6255 for 802.11ac WiFi and Bluetooth
- 6 inch 720*1440 DSI display
- Quectel EG25g usb modem
- Type-C port with alt-mode display (DP 1.2) and PD charging.

Signed-off-by: Martijn Braam <martijn@brixit.nl>
---

arch/arm/dts/Makefile | 1 +
arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi | 44 ++
arch/arm/dts/rk3399-pinephone-pro.dts | 520 ++++++++++++++++++
arch/arm/mach-rockchip/rk3399/Kconfig | 8 +
board/pine64/pinephone-pro-rk3399/Kconfig | 15 +
board/pine64/pinephone-pro-rk3399/MAINTAINERS | 8 +
board/pine64/pinephone-pro-rk3399/Makefile | 1 +
.../pinephone-pro-rk3399.c | 57 ++
configs/pinephone-pro-rk3399_defconfig | 92 ++++
include/configs/pinephone-pro-rk3399.h | 23 +
10 files changed, 769 insertions(+)
create mode 100644 arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3399-pinephone-pro.dts
create mode 100644 board/pine64/pinephone-pro-rk3399/Kconfig
create mode 100644 board/pine64/pinephone-pro-rk3399/MAINTAINERS
create mode 100644 board/pine64/pinephone-pro-rk3399/Makefile
create mode 100644 board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
create mode 100644 configs/pinephone-pro-rk3399_defconfig
create mode 100644 include/configs/pinephone-pro-rk3399.h
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index ed3d360bb1..3206370226 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -137,6 +137,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
rk3399-nanopi-r4s.dtb \
rk3399-orangepi.dtb \
rk3399-pinebook-pro.dtb \
+ rk3399-pinephone-pro.dtb \
rk3399-puma-haikou.dtb \
rk3399-roc-pc.dtb \
rk3399-roc-pc-mezzanine.dtb \
diff --git a/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi b/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
new file mode 100644
index 0000000000..9d44db5978
--- /dev/null
+++ b/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Peter Robinson <pbrobinson at gmail.com>
+ * Copyright (C) 2021 Martijn Braam <martijn at brixit.nl>
+ */
+
+#include "rk3399-u-boot.dtsi"
+#include "rk3399-sdram-lpddr4-100.dtsi"
+
+/ {
+ aliases {
+ spi0 = &spi1;
+ };
+
+ chosen {
+ u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
+ };
+
+ config {
+ u-boot,spl-payload-offset = <0x60000>; /* @ 384KB */
+ };
+};
+
+&i2c0 {
+ u-boot,dm-pre-reloc;
+};
+
+&rk818 {
+ u-boot,dm-pre-reloc;
+};
+
+&rng {
+ status = "okay";
+};
+
+&sdhci {
+ max-frequency = <25000000>;
+ u-boot,dm-pre-reloc;
+};
+
+&sdmmc {
+ max-frequency = <20000000>;
+ u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/rk3399-pinephone-pro.dts b/arch/arm/dts/rk3399-pinephone-pro.dts
new file mode 100644
index 0000000000..3fe1845ced
--- /dev/null
+++ b/arch/arm/dts/rk3399-pinephone-pro.dts
@@ -0,0 +1,520 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Martijn Braam <martijn@brixit.nl>
+ */
+
+/dts-v1/;
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ model = "Pine64 PinePhone Pro";
+ compatible = "pine64,pinephone-pro", "rockchip,rk3399";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ };
+
+ /* Power tree */
+ /* Root power source */
+ vcc_sysin: vcc-sysin {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sysin";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* Main 3.3v supply */
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_sysin>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <168>;
+ i2c-scl-falling-time-ns = <4>;
+ status = "okay";
+
+ rk818: pmic@1c {
+ compatible = "rockchip,rk818";
+ reg = <0x1c>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PC5 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc_sysin>;
+ vcc2-supply = <&vcc_sysin>;
+ vcc3-supply = <&vcc_sysin>;
+ vcc4-supply = <&vcc_sysin>;
+ vcc6-supply = <&vcc_sysin>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc_sysin>;
+ vcc9-supply = <&vcc3v3_sys>;
+
+ regulators {
+ vdd_cpu_l: DCDC_REG1 {
+ regulator-name = "vdd_cpu_1";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_center: DCDC_REG2 {
+ regulator-name = "vdd_center";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca3v0_codec: LDO_REG1 {
+ regulator-name = "vcca3v0_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v0_touch: LDO_REG2 {
+ regulator-name = "vcc3v0_touch";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca1v8_codec: LDO_REG3 {
+ regulator-name = "vcca1v8_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_power_on: LDO_REG4 {
+ regulator-name = "vcc_power_on";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_3v0: LDO_REG5 {
+ regulator-name = "vcc_3v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-name = "vcc_1v5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG7 {
+ regulator-name = "vcc1v8_dvp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_s3: LDO_REG8 {
+ regulator-name = "vcc3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_sd: LDO_REG9 {
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG {
+ regulator-name = "vcc3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ boost_otg: DCDC_BOOST {
+ regulator-name = "boost_otg";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <5000000>;
+ };
+ };
+
+ otg_switch: OTG_SWITCH {
+ regulator-name = "otg_switch";
+ };
+ };
+ };
+
+ vdd_cpu_b: regulator@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel1_pin>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel2_pin>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c1 {
+ i2c-scl-rising-time-ns = <300>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c3 {
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c4 {
+ i2c-scl-rising-time-ns = <600>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+
+ fusb0: typec-portc@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fusb0_int>;
+ status = "okay";
+ };
+};
+
+&io_domains {
+ status = "okay";
+
+ bt656-supply = <&vcc1v8_dvp>;
+ audio-supply = <&vcca1v8_codec>;
+ sdmmc-supply = <&vcc_sd>;
+ gpio1830-supply = <&vcc_3v0>;
+};
+
+&pmu_io_domains {
+ pmu1830-supply = <&vcc_3v0>;
+ status = "okay";
+};
+
+&pinctrl {
+ bt {
+ bt_enable_h: bt-enable-h {
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_host_wake_l: bt-host-wake-l {
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ bt_wake_l: bt-wake-l {
+ rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ buttons {
+ pwrbtn: pwrbtn {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ fusb302x {
+ fusb0_int: fusb0-int {
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ leds {
+ work_led_pin: work-led-pin {
+ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ diy_led_pin: diy-led-pin {
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie {
+ pcie_perst: pcie-perst {
+ rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie_pwr_en: pcie-pwr-en {
+ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ vsel1_pin: vsel1-pin {
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ vsel2_pin: vsel2-pin {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ sdcard {
+ sdmmc0_pwr_h: sdmmc0-pwr-h {
+ rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb-typec {
+ vcc5v0_typec_en: vcc5v0_typec_en {
+ rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb2 {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&sdio0 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ disable-wp;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+ vmmc-supply = <&vcc3v3_s3>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs200-1_8v;
+ non-removable;
+ status = "okay";
+};
+
+&tsadc {
+ /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-mode = <1>;
+ /* tshut polarity 0:LOW 1:HIGH */
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig b/arch/arm/mach-rockchip/rk3399/Kconfig
index 17628f9171..3ba603ca80 100644
--- a/arch/arm/mach-rockchip/rk3399/Kconfig
+++ b/arch/arm/mach-rockchip/rk3399/Kconfig
@@ -28,6 +28,13 @@ config TARGET_PINEBOOK_PRO_RK3399
with 4Gb RAM, onboard eMMC, USB-C, a USB3 and USB2 port,
1920*1080 screen and all the usual laptop features.
+config TARGET_PINEPHONE_PRO_RK3399
+ bool "PinePhone Pro"
+ help
+ PinePhone Pro is a phone based on the Rockchip rk3399 SoC
+ with 4Gb RAM, onboard eMMC, USB-C, a headphone jack,
+ 720x1440 screen and an external Quectel USB modem.
+
config TARGET_PUMA_RK3399
bool "Theobroma Systems RK3399-Q7 (Puma)"
help
@@ -154,6 +161,7 @@ endif # BOOTCOUNT_LIMIT
source "board/firefly/roc-pc-rk3399/Kconfig"
source "board/google/gru/Kconfig"
source "board/pine64/pinebook-pro-rk3399/Kconfig"
+source "board/pine64/pinephone-pro-rk3399/Kconfig"
source "board/pine64/rockpro64_rk3399/Kconfig"
source "board/rockchip/evb_rk3399/Kconfig"
source "board/theobroma-systems/puma_rk3399/Kconfig"
diff --git a/board/pine64/pinephone-pro-rk3399/Kconfig b/board/pine64/pinephone-pro-rk3399/Kconfig
new file mode 100644
index 0000000000..13d6465ae6
--- /dev/null
+++ b/board/pine64/pinephone-pro-rk3399/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_PINEPHONE_PRO_RK3399
+
+config SYS_BOARD
+ default "pinephone-pro-rk3399"
+
+config SYS_VENDOR
+ default "pine64"
+
+config SYS_CONFIG_NAME
+ default "pinephone-pro-rk3399"
+
+config BOARD_SPECIFIC_OPTIONS
+ def_bool y
+
+endif
diff --git a/board/pine64/pinephone-pro-rk3399/MAINTAINERS b/board/pine64/pinephone-pro-rk3399/MAINTAINERS
new file mode 100644
index 0000000000..9ca4fc4cbe
--- /dev/null
+++ b/board/pine64/pinephone-pro-rk3399/MAINTAINERS
@@ -0,0 +1,8 @@
+PINEPHONE_PRO
+M: Martijn Braam <martijn@brixit.nl>
+S: Maintained
+F: board/pine64/rk3399-pinephone-pro/
+F: include/configs/rk3399-pinephone-pro.h
+F: arch/arm/dts/rk3399-pinephone-pro.dts
+F: arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
+F: configs/pinephone-pro-rk3399_defconfig
diff --git a/board/pine64/pinephone-pro-rk3399/Makefile b/board/pine64/pinephone-pro-rk3399/Makefile
new file mode 100644
index 0000000000..8d9203053e
--- /dev/null
+++ b/board/pine64/pinephone-pro-rk3399/Makefile
@@ -0,0 +1 @@
+obj-y += pinephone-pro-rk3399.o
diff --git a/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c b/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
new file mode 100644
index 0000000000..8efeb6ea3d
--- /dev/null
+++ b/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2019 Vasily Khoruzhick <anarsoul@gmail.com>
+ * (C) Copyright 2021 Martijn Braam <martijn@brixit.nl>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <init.h>
+#include <syscon.h>
+#include <asm/io.h>
+#include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/grf_rk3399.h>
+#include <asm/arch-rockchip/hardware.h>
+#include <asm/arch-rockchip/misc.h>
+
+#define GRF_IO_VSEL_BT565_SHIFT 0
+#define PMUGRF_CON0_VSEL_SHIFT 8
+
+#ifdef CONFIG_MISC_INIT_R
+static void setup_iodomain(void)
+{
+ struct rk3399_grf_regs *grf =
+ syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+ struct rk3399_pmugrf_regs *pmugrf =
+ syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);
+
+ /* BT565 is in 1.8v domain */
+ rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_BT565_SHIFT);
+
+ /* Set GPIO1 1.8v/3.0v source select to PMU1830_VOL */
+ rk_setreg(&pmugrf->soc_con0, 1 << PMUGRF_CON0_VSEL_SHIFT);
+}
+
+int misc_init_r(void)
+{
+ const u32 cpuid_offset = 0x7;
+ const u32 cpuid_length = 0x10;
+ u8 cpuid[cpuid_length];
+ int ret;
+
+ setup_iodomain();
+
+ ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid);
+ if (ret)
+ return ret;
+
+ ret = rockchip_cpuid_set(cpuid, cpuid_length);
+ if (ret)
+ return ret;
+
+ ret = rockchip_setup_macaddr();
+
+ return ret;
+}
+
+#endif
diff --git a/configs/pinephone-pro-rk3399_defconfig b/configs/pinephone-pro-rk3399_defconfig
new file mode 100644
index 0000000000..2cf80f7d35
--- /dev/null
+++ b/configs/pinephone-pro-rk3399_defconfig
@@ -0,0 +1,92 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SIZE=0x8000
+CONFIG_ROCKCHIP_RK3399=y
+CONFIG_TARGET_PINEPHONE_PRO_RK3399=y
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-pinephone-pro"
+CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
+CONFIG_BOOTDELAY=3
+CONFIG_USE_PREBOOT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-pinephone-pro.dtb"
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_MISC_INIT_R=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
+CONFIG_SPL_MTD_SUPPORT=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_TPL=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_DM_KEYBOARD=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_MISC=y
+CONFIG_ROCKCHIP_EFUSE=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_SF_DEFAULT_SPEED=20000000
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_DM_ETH=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_TYPEC=y
+CONFIG_DM_PMIC_FAN53555=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM_RK3399_LPDDR4=y
+CONFIG_DM_RESET=y
+CONFIG_DM_RNG=y
+CONFIG_RNG_ROCKCHIP=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_ROCKCHIP_SPI=y
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_DM_VIDEO=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_DISPLAY_ROCKCHIP_EDP=y
+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_ERRNO_STR=y
diff --git a/include/configs/pinephone-pro-rk3399.h b/include/configs/pinephone-pro-rk3399.h
new file mode 100644
index 0000000000..fefa793fdd
--- /dev/null
+++ b/include/configs/pinephone-pro-rk3399.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Rockchip Electronics Co., Ltd
+ * Copyright (C) 2020 Peter Robinson <pbrobinson at gmail.com>
+ * Copyright (C) 2021 Martijn Braam <martijn@brixit.nl>
+ */
+
+#ifndef __PINEPHONE_PRO_RK3399_H
+#define __PINEPHONE_PRO_RK3399_H
+
+#define ROCKCHIP_DEVICE_SETTINGS \
+ "stdin=serial,usbkbd\0" \
+ "stdout=serial,vidconsole\0" \
+ "stderr=serial,vidconsole\0"
+
+#include <configs/rk3399_common.h>
+
+#define SDRAM_BANK_SIZE (2UL << 30)
+
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+
+#endif

96
SOURCES/rpi-Enable-using-the-DT-provided-by-the-Raspberry-Pi.patch

@ -0,0 +1,96 @@
From f10f94831450671a77f61fe413b4a57459963860 Mon Sep 17 00:00:00 2001
From: Peter Robinson <pbrobinson@gmail.com>
Date: Mon, 10 Aug 2020 22:20:29 +0100
Subject: [PATCH] rpi: Use firmware provided device tree

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
configs/rpi_0_w_defconfig | 2 +-
configs/rpi_2_defconfig | 2 +-
configs/rpi_3_32b_defconfig | 2 +-
configs/rpi_3_b_plus_defconfig | 2 +-
configs/rpi_3_defconfig | 2 +-
configs/rpi_defconfig | 2 +-
6 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/configs/rpi_0_w_defconfig b/configs/rpi_0_w_defconfig
index bba5e12b12..0241f4c6d3 100644
--- a/configs/rpi_0_w_defconfig
+++ b/configs/rpi_0_w_defconfig
@@ -17,7 +17,7 @@ CONFIG_CMD_GPIO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_FS_UUID=y
-CONFIG_OF_EMBED=y
+CONFIG_OF_BOARD=y
CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig
index 1c2bbb29ce..9573e475f4 100644
--- a/configs/rpi_2_defconfig
+++ b/configs/rpi_2_defconfig
@@ -17,7 +17,7 @@ CONFIG_CMD_GPIO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_FS_UUID=y
-CONFIG_OF_EMBED=y
+CONFIG_OF_BOARD=y
CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
diff --git a/configs/rpi_3_32b_defconfig b/configs/rpi_3_32b_defconfig
index b8a3d17f43..252df994e6 100644
--- a/configs/rpi_3_32b_defconfig
+++ b/configs/rpi_3_32b_defconfig
@@ -18,7 +18,7 @@ CONFIG_CMD_GPIO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_FS_UUID=y
-CONFIG_OF_EMBED=y
+CONFIG_OF_BOARD=y
CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
diff --git a/configs/rpi_3_b_plus_defconfig b/configs/rpi_3_b_plus_defconfig
index 4c361438fa..3b2996a2f9 100644
--- a/configs/rpi_3_b_plus_defconfig
+++ b/configs/rpi_3_b_plus_defconfig
@@ -18,7 +18,7 @@ CONFIG_CMD_GPIO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_FS_UUID=y
-CONFIG_OF_EMBED=y
+CONFIG_OF_BOARD=y
CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
diff --git a/configs/rpi_3_defconfig b/configs/rpi_3_defconfig
index 9b281a4f15..1e9ee6122e 100644
--- a/configs/rpi_3_defconfig
+++ b/configs/rpi_3_defconfig
@@ -18,7 +18,7 @@ CONFIG_CMD_GPIO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_FS_UUID=y
-CONFIG_OF_EMBED=y
+CONFIG_OF_BOARD=y
CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig
index b5ad53c37b..223fc03275 100644
--- a/configs/rpi_defconfig
+++ b/configs/rpi_defconfig
@@ -17,7 +17,7 @@ CONFIG_CMD_GPIO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_FS_UUID=y
-CONFIG_OF_EMBED=y
+CONFIG_OF_BOARD=y
CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
--
2.26.2

228
SOURCES/rpi-bcm2835_sdhost-firmware-managed-clock.patch

@ -0,0 +1,228 @@
From f3a870bfa075fb880f5e018a0a5ae6f27ca8be49 Mon Sep 17 00:00:00 2001
From: Vincent Fazio <vfazio@xes-inc.com>
Date: Mon, 13 Sep 2021 13:34:45 -0500
Subject: [PATCH] mmc: bcm2835-host: let firmware manage the clock

Newer firmware supports managing the sdhost clock divisor, so leverage
this feature if it is available.

SET_SDHOST_CLOCK is largely undocumented except for its usage within the
Linux kernel, which this change is based on.

https://github.com/raspberrypi/linux/commit/3cd16c39c718e2dda7885c4ed7a20118aed12524

Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
---
arch/arm/mach-bcm283x/include/mach/mbox.h | 18 ++++++++
arch/arm/mach-bcm283x/include/mach/msg.h | 10 +++++
arch/arm/mach-bcm283x/msg.c | 30 +++++++++++++
drivers/mmc/bcm2835_sdhost.c | 53 ++++++++++++++---------
4 files changed, 90 insertions(+), 21 deletions(-)

diff --git a/arch/arm/mach-bcm283x/include/mach/mbox.h b/arch/arm/mach-bcm283x/include/mach/mbox.h
index 7dcac583cc4..9b1943fcfc4 100644
--- a/arch/arm/mach-bcm283x/include/mach/mbox.h
+++ b/arch/arm/mach-bcm283x/include/mach/mbox.h
@@ -252,6 +252,24 @@ struct bcm2835_mbox_tag_get_clock_rate {
} body;
};
+#define BCM2835_MBOX_TAG_SET_SDHOST_CLOCK 0x00038042
+
+struct bcm2835_mbox_tag_set_sdhost_clock {
+ struct bcm2835_mbox_tag_hdr tag_hdr;
+ union {
+ struct {
+ u32 rate_hz;
+ u32 rate_1;
+ u32 rate_2;
+ } req;
+ struct {
+ u32 rate_hz;
+ u32 rate_1;
+ u32 rate_2;
+ } resp;
+ } body;
+};
+
#define BCM2835_MBOX_TAG_ALLOCATE_BUFFER 0x00040001
struct bcm2835_mbox_tag_allocate_buffer {
diff --git a/arch/arm/mach-bcm283x/include/mach/msg.h b/arch/arm/mach-bcm283x/include/mach/msg.h
index e45c1bf010f..ab37abdb6c6 100644
--- a/arch/arm/mach-bcm283x/include/mach/msg.h
+++ b/arch/arm/mach-bcm283x/include/mach/msg.h
@@ -22,6 +22,16 @@ int bcm2835_power_on_module(u32 module);
*/
int bcm2835_get_mmc_clock(u32 clock_id);
+/**
+ * bcm2835_set_sdhost_clock() - determine if firmware controls sdhost cdiv
+ *
+ * @rate_hz: Input clock frequency
+ * @rate_1: Returns a clock frequency
+ * @rate_2: Returns a clock frequency
+ * @return 0 of OK, -EIO on error
+ */
+int bcm2835_set_sdhost_clock(u32 rate_hz, u32 *rate_1, u32 *rate_2);
+
/**
* bcm2835_get_video_size() - get the current display size
*
diff --git a/arch/arm/mach-bcm283x/msg.c b/arch/arm/mach-bcm283x/msg.c
index e2badfecb09..8c1c36a5f15 100644
--- a/arch/arm/mach-bcm283x/msg.c
+++ b/arch/arm/mach-bcm283x/msg.c
@@ -21,6 +21,12 @@ struct msg_get_clock_rate {
u32 end_tag;
};
+struct msg_set_sdhost_clock {
+ struct bcm2835_mbox_hdr hdr;
+ struct bcm2835_mbox_tag_set_sdhost_clock set_sdhost_clock;
+ u32 end_tag;
+};
+
struct msg_query {
struct bcm2835_mbox_hdr hdr;
struct bcm2835_mbox_tag_physical_w_h physical_w_h;
@@ -111,6 +117,30 @@ int bcm2835_get_mmc_clock(u32 clock_id)
return clock_rate;
}
+int bcm2835_set_sdhost_clock(u32 rate_hz, u32 *rate_1, u32 *rate_2)
+{
+ ALLOC_CACHE_ALIGN_BUFFER(struct msg_set_sdhost_clock, msg_sdhost_clk, 1);
+ int ret;
+
+ BCM2835_MBOX_INIT_HDR(msg_sdhost_clk);
+ BCM2835_MBOX_INIT_TAG(&msg_sdhost_clk->set_sdhost_clock, SET_SDHOST_CLOCK);
+
+ msg_sdhost_clk->set_sdhost_clock.body.req.rate_hz = rate_hz;
+ msg_sdhost_clk->set_sdhost_clock.body.req.rate_1 = *rate_1;
+ msg_sdhost_clk->set_sdhost_clock.body.req.rate_2 = *rate_2;
+
+ ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg_sdhost_clk->hdr);
+ if (ret) {
+ printf("bcm2835: Could not query sdhost clock rate\n");
+ return -EIO;
+ }
+
+ *rate_1 = msg_sdhost_clk->set_sdhost_clock.body.resp.rate_1;
+ *rate_2 = msg_sdhost_clk->set_sdhost_clock.body.resp.rate_2;
+
+ return 0;
+}
+
int bcm2835_get_video_size(int *widthp, int *heightp)
{
ALLOC_CACHE_ALIGN_BUFFER(struct msg_query, msg_query, 1);
diff --git a/drivers/mmc/bcm2835_sdhost.c b/drivers/mmc/bcm2835_sdhost.c
index 894dbdd6861..3a9cd6f1eb2 100644
--- a/drivers/mmc/bcm2835_sdhost.c
+++ b/drivers/mmc/bcm2835_sdhost.c
@@ -181,6 +181,7 @@ struct bcm2835_host {
struct udevice *dev;
struct mmc *mmc;
struct bcm2835_plat *plat;
+ unsigned int firmware_sets_cdiv:1;
};
static void bcm2835_dumpregs(struct bcm2835_host *host)
@@ -233,7 +234,7 @@ static void bcm2835_reset_internal(struct bcm2835_host *host)
msleep(20);
host->clock = 0;
writel(host->hcfg, host->ioaddr + SDHCFG);
- writel(host->cdiv, host->ioaddr + SDCDIV);
+ writel(SDCDIV_MAX_CDIV, host->ioaddr + SDCDIV);
}
static int bcm2835_wait_transfer_complete(struct bcm2835_host *host)
@@ -598,6 +599,7 @@ static int bcm2835_transmit(struct bcm2835_host *host)
static void bcm2835_set_clock(struct bcm2835_host *host, unsigned int clock)
{
int div;
+ u32 clock_rate[2] = { 0 };
/* The SDCDIV register has 11 bits, and holds (div - 2). But
* in data mode the max is 50MHz wihout a minimum, and only
@@ -620,26 +622,34 @@ static void bcm2835_set_clock(struct bcm2835_host *host, unsigned int clock)
* clock divisor at all times.
*/
- if (clock < 100000) {
- /* Can't stop the clock, but make it as slow as possible
- * to show willing
- */
- host->cdiv = SDCDIV_MAX_CDIV;
- writel(host->cdiv, host->ioaddr + SDCDIV);
- return;
- }
+ if (host->firmware_sets_cdiv) {
+ bcm2835_set_sdhost_clock(clock, &clock_rate[0], &clock_rate[1]);
+ clock = max(clock_rate[0], clock_rate[1]);
+ } else {
+ if (clock < 100000) {
+ /* Can't stop the clock, but make it as slow as possible
+ * to show willing
+ */
+ host->cdiv = SDCDIV_MAX_CDIV;
+ writel(host->cdiv, host->ioaddr + SDCDIV);
+ return;
+ }
- div = host->max_clk / clock;
- if (div < 2)
- div = 2;
- if ((host->max_clk / div) > clock)
- div++;
- div -= 2;
+ div = host->max_clk / clock;
+ if (div < 2)
+ div = 2;
+ if ((host->max_clk / div) > clock)
+ div++;
+ div -= 2;
- if (div > SDCDIV_MAX_CDIV)
- div = SDCDIV_MAX_CDIV;
+ if (div > SDCDIV_MAX_CDIV)
+ div = SDCDIV_MAX_CDIV;
+
+ clock = host->max_clk / (div + 2);
+ host->cdiv = div;
+ writel(host->cdiv, host->ioaddr + SDCDIV);
+ }
- clock = host->max_clk / (div + 2);
host->mmc->clock = clock;
/* Calibrate some delays */
@@ -647,9 +657,6 @@ static void bcm2835_set_clock(struct bcm2835_host *host, unsigned int clock)
host->ns_per_fifo_word = (1000000000 / clock) *
((host->mmc->card_caps & MMC_MODE_4BIT) ? 8 : 32);
- host->cdiv = div;
- writel(host->cdiv, host->ioaddr + SDCDIV);
-
/* Set the timeout to 500ms */
writel(host->mmc->clock / 2, host->ioaddr + SDTOUT);
}
@@ -759,6 +766,7 @@ static int bcm2835_probe(struct udevice *dev)
struct bcm2835_host *host = dev_get_priv(dev);
struct mmc *mmc = mmc_get_mmc_dev(dev);
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+ u32 clock_rate[2] = { ~0 };
host->dev = dev;
host->mmc = mmc;
@@ -776,6 +784,9 @@ static int bcm2835_probe(struct udevice *dev)
host->max_clk = bcm2835_get_mmc_clock(BCM2835_MBOX_CLOCK_ID_CORE);
+ bcm2835_set_sdhost_clock(0, &clock_rate[0], &clock_rate[1]);
+ host->firmware_sets_cdiv = (clock_rate[0] != ~0);
+
bcm2835_add_host(host);
dev_dbg(dev, "%s -> OK\n", __func__);

77
SOURCES/rpi-fallback-to-max-clock-for-mmc.patch

@ -0,0 +1,77 @@
From 71ba043e5c5575f3d86536acade70dab6599489b Mon Sep 17 00:00:00 2001
From: Vincent Fazio <vfazio@xes-inc.com>
Date: Mon, 13 Sep 2021 11:22:30 -0500
Subject: [PATCH] arm: rpi: fallback to max clock rate for MMC clock

In rpi-firmware 25e2b597ebfb2495eab4816a276758dcc6ea21f1 and later,
the GET_CLOCK_RATE mailbox property was changed to return the last
value set by SET_CLOCK_RATE.

https://github.com/raspberrypi/firmware/issues/1619#issuecomment-917025502

U-Boot does not call SET_CLOCK_RATE so bcm2835_get_mmc_clock will
return zero and can cause degraded MMC performance.

Calling SET_CLOCK_RATE fixes the frequency of the clock to a specific
value and disables the firmware's clock scaling so is not an option.

Instead, fallback to GET_MAX_CLOCK_RATE in bcm2835_get_mmc_clock if
GET_CLOCK_RATE returns zero.

Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
---
arch/arm/mach-bcm283x/include/mach/mbox.h | 2 ++
arch/arm/mach-bcm283x/msg.c | 20 +++++++++++++++++++-
2 files changed, 21 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-bcm283x/include/mach/mbox.h b/arch/arm/mach-bcm283x/include/mach/mbox.h
index 2ae2d3d97c3..7dcac583cc4 100644
--- a/arch/arm/mach-bcm283x/include/mach/mbox.h
+++ b/arch/arm/mach-bcm283x/include/mach/mbox.h
@@ -224,6 +224,8 @@ struct bcm2835_mbox_tag_set_power_state {
};
#define BCM2835_MBOX_TAG_GET_CLOCK_RATE 0x00030002
+#define BCM2835_MBOX_TAG_GET_MAX_CLOCK_RATE 0x00030004
+#define BCM2835_MBOX_TAG_GET_MIN_CLOCK_RATE 0x00030007
#define BCM2835_MBOX_CLOCK_ID_EMMC 1
#define BCM2835_MBOX_CLOCK_ID_UART 2
diff --git a/arch/arm/mach-bcm283x/msg.c b/arch/arm/mach-bcm283x/msg.c
index 347aece3cd8..e2badfecb09 100644
--- a/arch/arm/mach-bcm283x/msg.c
+++ b/arch/arm/mach-bcm283x/msg.c
@@ -75,6 +75,7 @@ int bcm2835_get_mmc_clock(u32 clock_id)
{
ALLOC_CACHE_ALIGN_BUFFER(struct msg_get_clock_rate, msg_clk, 1);
int ret;
+ u32 clock_rate = 0;
ret = bcm2835_power_on_module(BCM2835_MBOX_POWER_DEVID_SDHCI);
if (ret)
@@ -90,7 +91,24 @@ int bcm2835_get_mmc_clock(u32 clock_id)
return -EIO;
}
- return msg_clk->get_clock_rate.body.resp.rate_hz;
+ clock_rate = msg_clk->get_clock_rate.body.resp.rate_hz;
+
+ if (clock_rate == 0)
+ {
+ BCM2835_MBOX_INIT_HDR(msg_clk);
+ BCM2835_MBOX_INIT_TAG(&msg_clk->get_clock_rate, GET_MAX_CLOCK_RATE);
+ msg_clk->get_clock_rate.body.req.clock_id = clock_id;
+
+ ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg_clk->hdr);
+ if (ret) {
+ printf("bcm2835: Could not query max eMMC clock rate\n");
+ return -EIO;
+ }
+
+ clock_rate = msg_clk->get_clock_rate.body.resp.rate_hz;
+ }
+
+ return clock_rate;
}
int bcm2835_get_video_size(int *widthp, int *heightp)

84
SOURCES/uefi-distro-load-FDT-from-any-partition-on-boot-device.patch

@ -0,0 +1,84 @@
From fd3434c754b3b8dddb345352a2434b6b8445343a Mon Sep 17 00:00:00 2001
From: Peter Robinson <pbrobinson@gmail.com>
Date: Sun, 18 Apr 2021 14:05:45 +0100
Subject: [PATCH] distro: load FDT from any partition on boot device

In the EFI_LOADER boot path, we were only checking the FAT partition
containing the EFI payload for dtb files. But this is somewhat of a
fiction. In reality there will be one small (V)FAT partition containing
grub (or whatever the payload may be), and a second boot partition
containing kernel/initrd/fdt (typically ext4). It is this second
partition where we should be looking for a FDT to load.

So instead scan all the partitions of the disk containing the EFI
payload. This matches where grub looks for kernel/initrd (barring
custom grub.cfg, in which case the user can use grub's 'devicetree'
command to load the correct FDT).

The other option is somehow passing the ${fdtfile} to grub so that it
can load the FDT based on selected kernel version location (which grub
knows) and SoC/board specific ${fdtfile} (which grub does not know).

Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
include/config_distro_bootcmd.h | 35 ++++++++++++++++++++++-----------
1 file changed, 23 insertions(+), 12 deletions(-)

diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h
index 2627c2a6a5..eadd1080b3 100644
--- a/include/config_distro_bootcmd.h
+++ b/include/config_distro_bootcmd.h
@@ -148,26 +148,37 @@
"fi\0" \
\
"load_efi_dtb=" \
- "load ${devtype} ${devnum}:${distro_bootpart} " \
- "${fdt_addr_r} ${prefix}${efi_fdtfile}\0" \
+ "load ${devtype} ${devnum}:${dtb_devp} " \
+ "${fdt_addr_r} ${prefix}${efi_fdtfile} && " \
+ "run boot_efi_binary\0" \
\
"efi_dtb_prefixes=/ /dtb/ /dtb/current/\0" \
- "scan_dev_for_efi=" \
+ "scan_dev_for_dtb=" \
"setenv efi_fdtfile ${fdtfile}; " \
BOOTENV_EFI_SET_FDTFILE_FALLBACK \
- "for prefix in ${efi_dtb_prefixes}; do " \
- "if test -e ${devtype} " \
- "${devnum}:${distro_bootpart} " \
- "${prefix}${efi_fdtfile}; then " \
- "run load_efi_dtb; " \
- "fi;" \
- "done;" \
- "run boot_efi_bootmgr;" \
+ "part list ${devtype} ${devnum} dtb_devplist; " \
+ "env exists dtb_devplist || setenv dtb_devplist " \
+ "${distro_bootpart}; " \
+ "for dtb_devp in ${dtb_devplist}; do " \
+ "for prefix in ${efi_dtb_prefixes}; do " \
+ "if test -e ${devtype} " \
+ "${devnum}:${dtb_devp} " \
+ "${prefix}${efi_fdtfile};"\
+ " then " \
+ "echo Found DTB ${devtype} " \
+ "${devnum}:${dtb_devp} " \
+ "${prefix}${efi_fdtfile};"\
+ "run load_efi_dtb; " \
+ "fi;" \
+ "done; " \
+ "done; " \
+ "run boot_efi_binary\0" \
+ "scan_dev_for_efi=" \
"if test -e ${devtype} ${devnum}:${distro_bootpart} " \
"efi/boot/"BOOTEFI_NAME"; then " \
"echo Found EFI removable media binary " \
"efi/boot/"BOOTEFI_NAME"; " \
- "run boot_efi_binary; " \
+ "run scan_dev_for_dtb; " \
"echo EFI LOAD FAILED: continuing...; " \
"fi; " \
"setenv efi_fdtfile\0"
--
2.31.1

236
SPECS/arm-image-installer.spec

@ -0,0 +1,236 @@
# Tarfile created using git
# git clone https://pagure.io/arm-image-installer.git
# git archive --format=tar --prefix=%{name}-%{version}/ %{version} | xz > ~/%{name}-%{version}.tar.xz

Name: arm-image-installer
Version: 3.6
Release: 1%{?dist}
Summary: Writes binary image files to any specified block device
License: GPLv2+
Url: https://pagure.io/arm-image-installer
Source0: %{name}-%{version}.tar.xz

BuildArch: noarch

Requires: btrfs-progs
Requires: e2fsprogs
Requires: libselinux-utils
Requires: parted
Requires: sudo
Requires: util-linux
Requires: xfsprogs
Requires: xz


%description
Allows one to first select a source image (local or remote). The image must be
a binary file containing: [MBR + Partitions + File Systems + Data]. A
destination block device should then be selected for final installation.


%prep
%autosetup

%build
echo "skipping..."

%install
install -d %{buildroot}%{_datadir}/arm-image-installer
install -d %{buildroot}%{_datadir}/arm-image-installer/socs.d
install -pm 644 socs.d/* %{buildroot}%{_datadir}/arm-image-installer/socs.d/
install -d %{buildroot}%{_datadir}/arm-image-installer/boards.d
install -pm 644 boards.d/* %{buildroot}%{_datadir}/arm-image-installer/boards.d/

install -d %{buildroot}%{_bindir}
install -pm 0755 update-uboot %{buildroot}%{_bindir}/
install -pm 0755 arm-image-installer %{buildroot}%{_bindir}/
install -pm 0755 rpi-uboot-update %{buildroot}%{_bindir}/
install -pm 0755 spi-flashing-disk %{buildroot}%{_bindir}/
ln -s /usr/bin/arm-image-installer %{buildroot}%{_bindir}/fedora-arm-image-installer

%files
%license COPYING
%doc AUTHORS README TODO SUPPORTED-BOARDS
%{_bindir}/arm-image-installer
%{_bindir}/fedora-arm-image-installer
%{_bindir}/update-uboot
%{_bindir}/rpi-uboot-update
%{_bindir}/spi-flashing-disk
%{_datadir}/arm-image-installer/

%changelog
* Wed Mar 30 2022 Paul Whalen <pwhalen@fedoraproject.org> - 3.6-1
- Update to 3.6

* Wed Jan 19 2022 Fedora Release Engineering <releng@fedoraproject.org> - 3.5-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild

* Fri Nov 12 2021 Paul Whalen <pwhalen@fedoraproject.org> - 3.5-1
- Update to 3.5

* Wed Jul 21 2021 Fedora Release Engineering <releng@fedoraproject.org> - 3.4-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild

* Mon Apr 19 2021 Paul Whalen <pwhalen@fedoraproject.org> - 3.4-1
- Update to 3.4
- Add spi-flashing-disk script

* Tue Apr 06 2021 Paul Whalen <pwhalen@fedoraproject.org> - 3.3-1
- Update to 3.3

* Tue Jan 26 2021 Fedora Release Engineering <releng@fedoraproject.org> - 3.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild

* Mon Jan 25 2021 Paul Whalen <pwhalen@fedoraproject.org> - 3.1-1
- Update to 3.1

* Wed Oct 07 2020 Paul Whalen <pwhalen@fedoraproject.org> - 3.0-1
- Update to 3.0

* Fri Aug 28 2020 Neal Gompa <ngompa13@gmail.com> - 2.18-2
- Add missing dependency for btrfs-progs

* Wed Aug 12 2020 Paul Whalen <pwhalen@fedoraproject.org> - 2.18-1
- Update to 2.18

* Mon Jul 27 2020 Fedora Release Engineering <releng@fedoraproject.org> - 2.17-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild

* Fri May 15 2020 Paul Whalen <pwhalen@fedoraproject.org> - 2.17-1
- Update to 2.17
- readd rpi-uboot-update

* Tue Apr 07 2020 Paul Whalen <pwhalen@fedoraproject.org> - 2.16-1
- Update to 2.16

* Tue Jan 28 2020 Fedora Release Engineering <releng@fedoraproject.org> - 2.15-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild

* Fri Dec 20 2019 Paul Whalen <pwhalen@fedoraproject.org> - 2.15-1
- Update to 2.15

* Thu Dec 19 2019 Paul Whalen <pwhalen@fedoraproject.org> - 2.14-1
- Update to 2.14

* Wed Jul 24 2019 Fedora Release Engineering <releng@fedoraproject.org> - 2.13-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild

* Wed Jun 26 2019 Paul Whalen <pwhalen@fedoraproject.org> - 2.13-1
- Update to 2.13
- Fix BZ#1655329, BZ#1692903

* Tue Apr 09 2019 Paul Whalen <pwhalen@fedoraproject.org> - 2.11-1
- Update to 2.11

* Thu Jan 31 2019 Fedora Release Engineering <releng@fedoraproject.org> - 2.10-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild

* Tue Dec 04 2018 Paul Whalen <pwhalen@fedoraproject.org> - 2.10-1
- Update to 2.10

* Sat Dec 01 2018 Paul Whalen <pwhalen@fedoraproject.org> - 2.9-1
- Update to 2.9

* Tue Oct 09 2018 Paul Whalen <pwhalen@redhat.com> - 2.8-1
- Update to 2.8

* Tue Aug 28 2018 Paul Whalen <pwhalen@redhat.com> - 2.7-1
- Update to 2.7

* Tue Aug 28 2018 Paul Whalen <pwhalen@redhat.com> - 2.6-1
- Update to 2.6

* Tue Jul 10 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2.5-1
- Update to 2.5
- Package rename with obsolete/provides

* Fri Jun 01 2018 Paul Whalen <pwhalen@redhat.com> - 2.4-1
- Update to 2.4
- Add initial IoT disk image support
- Add lvm support

* Mon May 28 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2.3-1
- Update to 2.3

* Thu Apr 12 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2.2-1
- Update to 2.2

* Wed Feb 07 2018 Fedora Release Engineering <releng@fedoraproject.org> - 2.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild

* Tue Nov 28 2017 Peter Robinson <pbrobinson@fedoraproject.org> 2.1-1
- Update to 2.1

* Thu Nov 23 2017 Peter Robinson <pbrobinson@fedoraproject.org> 2.0-1
- Update to 2.0
- Initial support for aarch64 images and associated SBCs

* Wed Jul 26 2017 Fedora Release Engineering <releng@fedoraproject.org> - 1.99.16-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild

* Tue May 16 2017 Peter Robinson <pbrobinson@fedoraproject.org> 1.99.16-1
- Update to 1.99.16

* Wed May 3 2017 Peter Robinson <pbrobinson@fedoraproject.org> 1.99.15-1
- Update to 1.99.15

* Fri Apr 28 2017 Peter Robinson <pbrobinson@fedoraproject.org> 1.99.14-1
- Update to 1.99.14

* Fri Feb 10 2017 Fedora Release Engineering <releng@fedoraproject.org> - 1.99.13-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild

* Mon Oct 24 2016 Peter Robinson <pbrobinson@fedoraproject.org> 1.99.13-1
- Update to 1.99.13
- Add basic Raspberry Pi firmware upgrade script

* Wed Sep 21 2016 Peter Robinson <pbrobinson@fedoraproject.org> 1.99.12-1
- Update to 1.99.12

* Mon Aug 22 2016 Peter Robinson <pbrobinson@fedoraproject.org> 1.99.11-1
- Update to 1.99.11

* Wed Aug 17 2016 Peter Robinson <pbrobinson@fedoraproject.org> 1.99.10-1
- Update to 1.99.10
- Added numerous boards

* Tue Jun 21 2016 Peter Robinson <pbrobinson@fedoraproject.org> 1.99.9-2
- Require sudo

* Wed May 18 2016 Peter Robinson <pbrobinson@fedoraproject.org> 1.99.9-1
- Update to 1.99.9
- Support for ClearFog

* Mon Mar 7 2016 Peter Robinson <pbrobinson@fedoraproject.org> 1.99.8-1
- Update to 1.99.8

* Wed Feb 03 2016 Fedora Release Engineering <releng@fedoraproject.org> - 1.99.7-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild

* Tue Jan 19 2016 Peter Robinson <pbrobinson@fedoraproject.org> 1.99.7-1
- Minor updates

* Mon Jan 18 2016 Peter Robinson <pbrobinson@fedoraproject.org> 1.99.6-2
- Fix directory of data location

* Mon Jan 18 2016 Peter Robinson <pbrobinson@fedoraproject.org> 1.99.6-1
- Update to 1.99.6
- Rename binary to arm-image-installer, add compat symlink

* Sun Aug 2 2015 Peter Robinson <pbrobinson@fedoraproject.org> 1.99.5-1
- Update to 1.99.5

* Fri Jul 24 2015 Peter Robinson <pbrobinson@fedoraproject.org> 1.99.4-1
- Update to 1.99.4

* Fri Jul 3 2015 Peter Robinson <pbrobinson@fedoraproject.org> 1.99.3-1
- Update to 1.99.3 for u-boot 2015.07 support

* Wed Jun 17 2015 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.99.2-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild

* Thu Mar 19 2015 Peter Robinson <pbrobinson@fedoraproject.org> 1.99.2-1
- Update to 1.99.2

* Wed Mar 18 2015 Peter Robinson <pbrobinson@fedoraproject.org> 1.99.1-0.1
- Update to new upstream

479
SPECS/uboot-tools.spec

@ -0,0 +1,479 @@
#global candidate rc0
%bcond_without toolsonly

Name: uboot-tools
Version: 2022.07
Release: 1%{?candidate:.%{candidate}}%{?dist}
Summary: U-Boot utilities
License: GPLv2+ BSD LGPL-2.1+ LGPL-2.0+
URL: http://www.denx.de/wiki/U-Boot

ExcludeArch: s390x
Source0: https://ftp.denx.de/pub/u-boot/u-boot-%{version}%{?candidate:-%{candidate}}.tar.bz2
Source1: aarch64-boards

# Fedoraisms patches
# Needed to find DT on boot partition that's not the first partition
Patch1: uefi-distro-load-FDT-from-any-partition-on-boot-device.patch

# Board fixes and enablement
# RPi - uses RPI firmware device tree for HAT support
Patch3: rpi-Enable-using-the-DT-provided-by-the-Raspberry-Pi.patch
Patch4: rpi-fallback-to-max-clock-for-mmc.patch
Patch5: rpi-bcm2835_sdhost-firmware-managed-clock.patch
# Rockchips improvements
Patch7: rockchip-Add-initial-support-for-the-PinePhone-Pro.patch

BuildRequires: bc
BuildRequires: bison
BuildRequires: dtc
BuildRequires: flex
BuildRequires: gcc
BuildRequires: gnutls-devel
BuildRequires: libuuid-devel
BuildRequires: make
BuildRequires: ncurses-devel
BuildRequires: openssl-devel
BuildRequires: perl-interpreter
BuildRequires: python3-devel
BuildRequires: python3-setuptools
BuildRequires: python3-libfdt
BuildRequires: SDL-devel
BuildRequires: swig
%ifarch aarch64
BuildRequires: arm-trusted-firmware-armv8
%endif
Requires: dtc

%description
This package contains a few U-Boot utilities - mkimage for creating boot images
and fw_printenv/fw_setenv for manipulating the boot environment variables.

%if %{with toolsonly}
%ifarch aarch64
%package -n uboot-images-armv8
Summary: U-Boot firmware images for aarch64 boards
BuildArch: noarch

%description -n uboot-images-armv8
U-Boot firmware binaries for aarch64 boards
%endif
%endif

%prep
%autosetup -p1 -n u-boot-%{version}%{?candidate:-%{candidate}}

cp %SOURCE1 .

%build
mkdir builds

%make_build HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" tools-only_defconfig O=builds/
%make_build HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" tools-all O=builds/

%if %{with toolsonly}
# U-Boot device firmwares don't currently support LTO
%define _lto_cflags %{nil}

%ifarch aarch64
for board in $(cat %{_arch}-boards)
do
echo "Building board: $board"
mkdir builds/$(echo $board)/

# ATF selection, needs improving, suggestions of ATF SoC to Board matrix welcome
sun50i=(a64-olinuxino amarula_a64_relic bananapi_m2_plus_h5 bananapi_m64 libretech_all_h3_cc_h5 nanopi_a64 nanopi_neo2 nanopi_neo_plus2 orangepi_pc2 orangepi_prime orangepi_win orangepi_zero_plus orangepi_zero_plus2 pine64-lts pine64_plus pinebook pinephone pinetab sopine_baseboard teres_i)
if [[ " ${sun50i[*]} " == *" $board "* ]]; then
echo "Board: $board using sun50i_a64"
cp /usr/share/arm-trusted-firmware/sun50i_a64/* builds/$(echo $board)/
fi
sun50h6=(beelink_gs1 orangepi_3 orangepi_lite2 orangepi_one_plus orangepi_zero2 pine_h64 tanix_tx6)
if [[ " ${sun50h6[*]} " == *" $board "* ]]; then
echo "Board: $board using sun50i_h6"
cp /usr/share/arm-trusted-firmware/sun50i_h6/* builds/$(echo $board)/
fi
rk3328=(evb-rk3328 nanopi-r2s-rk3328 rock64-rk3328 rock-pi-e-rk3328 roc-cc-rk3328)
if [[ " ${rk3328[*]} " == *" $board "* ]]; then
echo "Board: $board using rk3328"
cp /usr/share/arm-trusted-firmware/rk3328/* builds/$(echo $board)/
fi
rk3399=(evb-rk3399 ficus-rk3399 firefly-rk3399 khadas-edge-captain-rk3399 khadas-edge-rk3399 khadas-edge-v-rk3399 leez-rk3399 nanopc-t4-rk3399 nanopi-m4-2gb-rk3399 nanopi-m4b-rk3399 nanopi-m4-rk3399 nanopi-neo4-rk3399 nanopi-r4s-rk3399 orangepi-rk3399 pinebook-pro-rk3399 pinephone-pro-rk3399 puma-rk3399 rock960-rk3399 rock-pi-4c-rk3399 rock-pi-4-rk3399 rock-pi-n10-rk3399pro rockpro64-rk3399 roc-pc-mezzanine-rk3399 roc-pc-rk3399)
if [[ " ${rk3399[*]} " == *" $board "* ]]; then
echo "Board: $board using rk3399"
cp /usr/share/arm-trusted-firmware/rk3399/* builds/$(echo $board)/
fi
# End ATF

make $(echo $board)_defconfig O=builds/$(echo $board)/
%make_build HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" O=builds/$(echo $board)/

# build spi images for rockchip boards with SPI flash
rkspi=(rock64-rk3328)
if [[ " ${rkspi[*]} " == *" $board "* ]]; then
echo "Board: $board with SPI flash"
builds/$(echo $board)/tools/mkimage -n rk3328 -T rkspi -d builds/$(echo $board)/tpl/u-boot-tpl.bin:builds/$(echo $board)/spl/u-boot-spl.bin builds/$(echo $board)/idbloader.spi
fi
rkspi=(evb-rk3399 khadas-edge-captain-rk3399 khadas-edge-rk3399 khadas-edge-v-rk3399 nanopc-t4-rk3399 pinebook-pro-rk3399 pinephone-pro-rk3399 rockpro64-rk3399 roc-pc-mezzanine-rk3399 roc-pc-rk3399)
if [[ " ${rkspi[*]} " == *" $board "* ]]; then
echo "Board: $board with SPI flash"
builds/$(echo $board)/tools/mkimage -n rk3399 -T rkspi -d builds/$(echo $board)/tpl/u-boot-tpl.bin:builds/$(echo $board)/spl/u-boot-spl.bin builds/$(echo $board)/idbloader.spi
fi
done

%endif
%endif

%install
mkdir -p %{buildroot}%{_bindir}
mkdir -p %{buildroot}%{_mandir}/man1
mkdir -p %{buildroot}%{_datadir}/uboot/

%if %{with toolsonly}
%ifarch aarch64
for board in $(ls builds)
do
mkdir -p %{buildroot}%{_datadir}/uboot/$(echo $board)/
for file in u-boot.bin u-boot.dtb u-boot.img u-boot-dtb.img u-boot.itb u-boot-sunxi-with-spl.bin u-boot-rockchip.bin idbloader.img idbloader.spi spl/boot.bin spl/sunxi-spl.bin
do
if [ -f builds/$(echo $board)/$(echo $file) ]; then
install -p -m 0644 builds/$(echo $board)/$(echo $file) %{buildroot}%{_datadir}/uboot/$(echo $board)/
fi
done
done
%endif

# Bit of a hack to remove binaries we don't use as they're large
%ifarch aarch64
for board in $(ls builds)
do
rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot.dtb
if [ -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot-sunxi-with-spl.bin ]; then
rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot{,-dtb}.*
fi
if [ -f %{buildroot}%{_datadir}/uboot/$(echo $board)/MLO ]; then
rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot.bin
fi
if [ -f %{buildroot}%{_datadir}/uboot/$(echo $board)/SPL ]; then
rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot.bin
fi
if [ -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot.imx ]; then
rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot.bin
fi
if [ -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot-spl.kwb ]; then
rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot.*
rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot-spl.bin
fi
if [ -f %{buildroot}%{_datadir}/uboot/$(echo $board)/idbloader.img ]; then
rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot.bin
rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot{,-dtb}.img
fi
done
%endif
%endif

for tool in bmp_logo dumpimage env/fw_printenv fit_check_sign fit_info gdb/gdbcont gdb/gdbsend gen_eth_addr gen_ethaddr_crc img2srec mkenvimage mkimage mksunxiboot ncb proftool sunxi-spl-image-builder ubsha1 xway-swap-bytes kwboot
do
install -p -m 0755 builds/tools/$tool %{buildroot}%{_bindir}
done
install -p -m 0644 doc/mkimage.1 %{buildroot}%{_mandir}/man1

install -p -m 0755 builds/tools/env/fw_printenv %{buildroot}%{_bindir}
( cd %{buildroot}%{_bindir}; ln -sf fw_printenv fw_setenv )

# Copy some useful docs over
mkdir -p builds/docs
cp -p board/hisilicon/hikey/README builds/docs/README.hikey
cp -p board/rockchip/evb_rk3399/README builds/docs/README.evb_rk3399
cp -p board/sunxi/README.sunxi64 builds/docs/README.sunxi64
cp -p board/sunxi/README.nand builds/docs/README.sunxi-nand

%files
%doc README doc/develop/distro.rst doc/README.gpt
%doc doc/README.rockchip doc/develop/uefi doc/uImage.FIT doc/arch/arm64.rst
%doc builds/docs/* doc/board/amlogic/ doc/board/rockchip/
%{_bindir}/*
%{_mandir}/man1/mkimage.1*
%dir %{_datadir}/uboot/

%if %{with toolsonly}
%ifarch aarch64
%files -n uboot-images-armv8
%{_datadir}/uboot/*
%endif
%endif

%changelog
* Sun Jul 17 2022 Peter Robinson <pbrobinson@fedoraproject.org> - 2022.07-1
- Update to 2022.07 GA

* Mon Jul 04 2022 Peter Robinson <pbrobinson@fedoraproject.org> - 2022.07-0.6.rc6
- Update to 2022.07 RC6

* Mon Jun 20 2022 Peter Robinson <pbrobinson@fedoraproject.org> - 2022.07-0.5.rc5
- Update to 2022.07 RC5

* Sun Jun 12 2022 Peter Robinson <pbrobinson@fedoraproject.org> - 2022.07-0.4.rc4
- Update to 2022.07 RC4
- Some minor Rockchips device fixes

* Wed May 25 2022 Peter Robinson <pbrobinson@fedoraproject.org> - 2022.07-0.3.rc3
- Update to 2022.07 RC3

* Sat May 14 2022 Peter Robinson <pbrobinson@fedoraproject.org> - 2022.07-0.2.rc2
- Update to 2022.07 RC2

* Tue Apr 26 2022 Peter Robinson <pbrobinson@fedoraproject.org> - 2022.07-0.1.rc1
- Update to 2022.07 RC1

* Mon Apr 04 2022 Peter Robinson <pbrobinson@fedoraproject.org> - 2022.04-1
- Update to 2022.04 GA

* Mon Mar 28 2022 Peter Robinson <pbrobinson@fedoraproject.org> - 2022.04-0.4.rc5
- Update to 2022.04 RC5

* Tue Mar 08 2022 Peter Robinson <pbrobinson@fedoraproject.org> - 2022.04-0.3.rc3
- Update to 2022.04 RC3
- Enable new Rockchip devices

* Tue Feb 15 2022 Peter Robinson <pbrobinson@fedoraproject.org> - 2022.04-0.2.rc2
- Update to 2022.04 RC2

* Wed Feb 02 2022 Peter Robinson <pbrobinson@fedoraproject.org> - 2022.04-0.1.rc1
- Update to 2022.04 RC1

* Sat Jan 22 2022 Fedora Release Engineering <releng@fedoraproject.org> - 2022.01-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild

* Mon Jan 10 2022 Peter Robinson <pbrobinson@fedoraproject.org> - 2022.01-1
- Update to 2022.01

* Wed Jan 05 2022 Peter Robinson <pbrobinson@fedoraproject.org> - 2022.01-0.3.rc4
- Upstream fixes for PHY and UEFI

* Mon Dec 20 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2022.01-0.2.rc4
- Update to 2022.01 RC4

* Mon Nov 15 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2022.01-0.1.rc2
- Update to 2022.01 RC2

* Mon Nov 15 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.10-3
- Fixes for rk3399 devices

* Thu Oct 14 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.10-2
- Fix booting from MMC for Rockchip 3399 (rhbz #2014182)
- Enable new rk3399 devices (Leez, NanoPi-M4B, NanoPi-4S, NanoPi-T4) (rhbz #2009126)

* Mon Oct 04 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.10-1
- Update to 2021.10

* Mon Sep 27 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.10-0.7.rc5
- Update to 2021.10 RC5

* Wed Sep 15 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.10-0.6.rc4
- Update to 2021.10 RC4
- Proposed fix for RPi MMC clock issue

* Tue Sep 14 2021 Sahana Prasad <sahana@redhat.com> - 2021.10-0.6.rc3
- Rebuilt with OpenSSL 3.0.0

* Mon Aug 30 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.10-0.5.rc3
- Update to 2021.10 RC3

* Tue Aug 24 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.10-0.4.rc2
- Fix for Raspberry Pi firmware properties

* Mon Aug 23 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.10-0.3.rc2
- Fix for rockchip SPI

* Mon Aug 16 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.10-0.2.rc2
- Update to 2021.10 RC2

* Sun Aug 08 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.10-0.1.rc1
- Update to 2021.10 RC1

* Thu Jul 22 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.07-2
- Fix regression for Rockchip devices running firmware from SPI flash

* Mon Jul 05 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.07-1
- Update to 2021.07 GA

* Mon Jun 28 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.07-0.6.rc5
- Update to 2021.07 RC5
- Build SPI fash images for ROC-PC-RK3399

* Mon Jun 07 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.07-0.5.rc4
- Update to 2021.07 RC4

* Sat Jun 05 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.07-0.4.rc3
- Fix AllWinner devices booting from mSD/MMC

* Tue May 25 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.07-0.3.rc3
- Update to 2021.07 RC3
- Build against ATF 2.5 GA

* Thu May 13 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.07-0.2.rc2
- Build against new ATF 2.5-rc1

* Mon May 10 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.07-0.1.rc2
- Update to 2021.07 RC2

* Wed Apr 28 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.04-3
- Upstream fix for console regression (rhbz 1946278)
- Fix for fallback.efi crash (rhbz 1733817)

* Wed Apr 21 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.04-2
- Revert keyboard console regression change (rhbz 1946278)

* Sun Apr 18 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.04-1
- Update to 2021.04 GA
- Fix DTB load check (rhbz 1946278)
- Build Rockchip SPI support as idbloader.spi
- Fixes for Rockchip devices
- Build Turris Omnia for MMC/SPI/UART

* Wed Mar 17 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.04-0.6.rc4
- Update to 2021.04 RC4
- Move to upstream fix for SMP on RPi3B and RPi3B+

* Sat Mar 13 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.04-0.5.rc3
- Fix for SMP on RPi3B and RPi3B+
- Initial support for Pinephone 3Gb edition

* Mon Mar 08 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.04-0.4.rc3
- Update to 2021.04 RC3

* Tue Feb 16 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.04-0.3.rc2
- Update to 2021.04 RC2

* Mon Feb 15 2021 Dennis Gilmore <dennis@ausil.us>
- build spi and uart images in addition to mmc for helios4 and clearfog

* Wed Feb 10 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.04-0.2.rc1
- Fixes for network issues on some Allwinner devices

* Mon Feb 01 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.04-0.1.rc1
- Update to 2021.04 RC1
- Add new upstream devices

* Wed Jan 27 2021 Fedora Release Engineering <releng@fedoraproject.org> - 2021.01-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild

* Mon Jan 11 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.01-1
- Update to 2021.01 GA
- Updates for Raspberry Pi 4 Series of devices

* Tue Jan 5 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.01-0.5.rc5
- Update to 2021.01 RC5

* Sun Dec 27 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.01-0.4.rc4
- Update to 2021.01 RC4
- Latest RPi-400/CM4 support patch

* Tue Dec 15 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.01-0.3.rc3
- Update to 2021.01 RC3
- Latest RPi-400/CM4 support patch
- Re-enable previously disabled device support

* Mon Dec 14 2020 Javier Martinez Canillas <javierm@redhat.com> - 2021.01-0.2.rc2
- Fix a "scan_dev_for_efi" not defined error

* Sun Nov 22 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.01-0.1.rc2
- Update to 2021.01 RC2
- Latest Pinebook Pro display patches
- Initial RPi-400 support patch
- Update Fedora specific patches

* Sun Nov 8 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-3
- Fix SPI on Rockchip devices
- Latest Pinebook Pro display patches
- Fix Keyboard and USB-A ports on Pinebook Pro

* Wed Oct 28 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-2
- Fix kernel installs for non EBBR systems
- Fix for wired networks on some Allwinner devices

* Tue Oct 06 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-1
- Update to 2020.10

* Sun Sep 27 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-0.6.rc5
- Initial support for display output on Pinebook Pro

* Tue Sep 22 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-0.5.rc5
- Update to 2020.10 RC5

* Wed Sep 09 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-0.4.rc4
- Update to 2020.10 RC4

* Wed Aug 19 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-0.3.rc2
- Enable a number of new Rockchip devices

* Mon Aug 10 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-0.2.rc2
- Update to 2020.10 RC2

* Tue Jul 28 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-0.1.rc1
- 2020.10 RC1

* Tue Jul 14 2020 Tom Stellard <tstellar@redhat.com> - 2020.07-2
- Use make macros
- https://fedoraproject.org/wiki/Changes/UseMakeBuildInstallMacro

* Mon Jul 06 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.07-1
- 2020.07 GA

* Tue Jun 23 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.07-0.5.rc5
- 2020.07 RC5

* Thu Jun 18 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.07-0.4.rc4
- Update various patches to latest upstream

* Wed Jun 10 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.07-0.3.rc4
- 2020.07 RC4
- Minor updates and other fixes

* Tue May 12 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.07-0.2.rc2
- 2020.07 RC2
- Minor device updates

* Wed Apr 29 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.07-0.1.rc1
- 2020.07 RC1

* Tue Apr 21 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.04-4
- Initial support for USB on Rasperry Pi 4

* Tue Apr 21 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.04-3
- Ship u-boot-rockchip.bin for SPI flash

* Mon Apr 20 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.04-2
- Fix ATF for new aarch64 devices
- Fix Wandboard board detection (rhbz 1825247)
- Fix mSD card on RockPro64
- Enable (inital) Pinebook Pro

* Tue Apr 14 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.04-1
- 2020.04

* Tue Apr 7 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.7-rc5
- 2020.04 RC5

* Tue Mar 31 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.6-rc4
- 2020.04 RC4
- Updates for NVIDIA Jetson platforms
- Support RNG for random seed for KASLR on some Rockchip devices

* Thu Mar 26 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.5-rc3
- Fix ext4 alignment issue seen on some NXP i.MX devices

* Wed Feb 26 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.4-rc3
- 2020.04 RC3

* Thu Feb 13 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.3-rc2
- 2020.04 RC2

* Sun Feb 2 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.2-rc1
- Update genet NIC driver

* Wed Jan 29 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.1-rc1
- 2020.04 RC1

* Tue Jan 7 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.01-1
- 2020.01
Loading…
Cancel
Save