BCM43430 NVRAM config file for the RPi3 Model B was set to the value
found by brcmf_dmi_probe(), but should use the DT compatible.
Rename the file to actually make it work with the kernel driver.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Add a NVRAM file for the Ampak AP6330 Wifi/BT module as used on the
Prowise PT301 tablet. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the Prowise PT301 tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add a NVRAM file for the Broadcom 43430 WiFi/BT chip as found on the
Chuwi Vi8 Plus tablet's mainboard. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the Chuwi Vi8 Plus tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add a NVRAM file for the Ampak AP6234 Wifi/BT module as used on the
Meegopad T08 HDMI stick. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the Meegopad T08 HDMI stick.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add a NVRAM file for the Ampak AP6212 Wifi/BT module as used on the
Jumper EZpad mini 3 tablet. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the Jumper EZpad mini 3 tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add a NVRAM file for the Ampak AP6212 Wifi/BT module as used on the
ONDA V80 Plus tablet. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the ONDA V80 Plus tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add a NVRAM file for the Ampak AP6356 Wifi/BT module as used in the
GPD win handheld. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the GPD win handheld.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Lemaker, the manufacturer of the Banana Pro board has always shipped
the NVRAM file from the Cubietech Cubietruck wifi for use with the
Ampak AP6181 43362 WiFi/BT module on the Banana Pro.
This commit adds a symlink from brcmfmac43362-sdio.lemaker,bananapro.txt
to brcm/brcmfmac43362-sdio.cubietech,cubietruck.txt to match this, making
the Wifi on the Banana Pro work OOTB.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add a NVRAM file for the Ampak AP6210 Wifi/BT module as found on the
Cubietech Cubietruck board. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the Cubietech Cubietruck board.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
These firmwares are for the BCM4366 3x3 802.11 ac chipsets, which also
comprise of BCM4366E or BCM43664 devices.
Edited to add WHENCE entry by Josh Boyer
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Ampak AP6212 and Murata 1DX are both brcmfmac43430-sdio based WiFi/BT
modules.
I created these NVRAM config files from scratch based on publicly
available information documented on the Linaro Wiki:
https://wiki.linaro.org/mbl/nvram
It is released under GPLv2.
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add the CYW4373 SDIO and USB firmware files, along with the corresponding
Cypress license file.
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This firmware include fixes for:
CVE-2016-0801 - dropping BRCM proprietary packets received over the air.
CVE-2017-0561 - adding length checks for TDLS action frames.
CVE-2017-9417 - adding length checks for WME IE.
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This firmware include fixes for:
CVE-2016-0801 - dropping BRCM proprietary packets received over the air.
CVE-2017-0561 - adding length checks for TDLS action frames.
CVE-2017-9417 - adding length checks for WME IE.
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This firmware include fixes for:
CVE-2016-0801 - dropping BRCM proprietary packets received over the air.
CVE-2017-0561 - adding length checks for TDLS action frames.
CVE-2017-9417 - adding length checks for WME IE.
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Revision 0 of the bcm43430 chipset requires separate firmware for
which support has been added to the brcmfmac driver. This firmware
include fixes for following vulnerabilities:
CVE-2016-0801 - dropping BRCM proprietary packets received over the air.
CVE-2017-0561 - adding length checks for TDLS action frames.
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
New firmware addressing security issue:
CVE-2016-0801 - dropping BRCM proprietary packets received over the air.
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Update to latest version as it reportedly resolves issues when
operating in 5GHz band.
Reported-by: Brennan Ashton <brn@deako.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch releases firmware for the BCM43430 and BCM43438 chipset. The
latter is found on the Raspberry Pi 3.
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch adds firmware for the bcm4366 11ac wlan device which
is supported by the brcmfmac driver since commit 55acca90da52
("brcmfmac: Add support for the BCM4365 and BCM4366 PCIE devices").
Cc: Rafal Milecki <zajec5@gmail.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Patch for brcmfmac has been submitted upstream and applied to the
wireless-drivers-next repo with commit fdf345642297 ("brcmfmac: Add
support for PCIE 4350 revision 5 device"). This patch adds the new
firmware file required for it.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch involves a firmware update for the bcm43602 device providing
following:
* fixing WoWLAN.
* fixing problems with hibernate.
* support for dma error checking.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Publishing new firmware for the BCM4356 11ac PCIe device.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kyle McMartin <jkkm@boosh.dhcp.thefacebook.com>
This patch adds firmware for the BCM4350 11ac PCIe device.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kyle McMartin <jkkm@boosh.DHCP.thefacebook.com>
A number of end-users reported issues with BCM43602 on the 2015
MacBook Pro. It turned out the previously released firmware did
not properly support that device [1]. Hence an update of the STA
firmware and while at it refresh the AP firmware as well. The
latter has been tested using Netgear R8000. The STA firmware has
been tested on MacBook Pro.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=100201
Cc: Rafal Milecki <zajec5@gmail.com>
Tested-by: Knuth Posern <knuth@posern.org>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch provides firmware for the B5 version of the BCM4324(1)
device. This device can be found in Lenovo Thinkpad Tablets.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Mistake was made sending out firmware for the BCM4339. Fortunately
it was discovered by co-worker.
Reported-by: Pontus Fuchs <pontusf@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch adds firmware files for the BCM43602 PCIe device
supported by brcmfmac. This device is used in router equipment
like Netgear R8000. For this reason there are two firmware
files in this patch.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Matthias Brugger