The script compares the files listed in WHENCE (or otherwise expected)
and the files known to git, and reports all differences as errors.
Add a 'check' rule to the Makefile that runs this.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
This patch releases firmware for the BCM43430 and BCM43438 chipset. The
latter is found on the Raspberry Pi 3.
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Firmware version for these images is 16.68.1.p70
PCIe-USB and PCIe-UART are two variant of PCIe8997 chipset in which WLAN
is over PCIe whereas bluetooth can be over USB or UART bus.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Add platform data for channel tuning on Intel OPA HFI adapter 100 series
Signed-off-by: John Fleck <john.fleck@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
This device is a new model from Realtek. Updates to driver btrtl will
soon be submitted to the kernel.
These files were provided by the Realtek developer.
Signed-off-by: 陆朱伟 <alex_lu@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: linux-bluetooth@vger.kernel.org
[bwh: Fixed the filename wildcard in WHENCE]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
rt3071.bin is a copy of the second firmware image in rt2870.bin,
used only by the old rt2870sta driver.
Update it to version 0.36.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
QCA9984 is a new chip supported by ath10k. Firmware version is 10.4-3.2-00072.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
QCA9888 is a new chip supported by ath10k. Firmware version is 10.4-3.2-00072.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
QCA9887 is a new chip supported by ath10k. Firmware version is 10.2.4-1.0-00013.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
QCA4019 is a new chip supported by ath10k. Firmware version is 10.4-3.2.1-00028.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This new firmware for the qed* adpaters fixes several issues:
- Better blocking of malicious VFs.
- After FLR, Tx-switching [internal routing] of packets might
be incorrect.
- Deletion of unicast MAC filters would sometime have side-effect
of corrupting the MAC filters configred for a device.
It also contains fixes for future qed* drivers that *hopefully* would be
sent for review in the near future.
In addition, it would allow driver some new functionality, including:
- Allowing PF/VF driver compaitibility with old drivers [running
pre-8.10.5.0 firmware].
- Better debug facilities.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch updates the firmware files for R-Car H3 and M3-W to fix
the device detection issue.
The md5sum of the files are:
645db7e9056029efa15f158e51cc8a11 r8a779x_usb3_v2.dlmem
687d5d42f38f9850f8d5a6071dca3109 r8a779x_usb3_v3.dlmem
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This updates Broxton audio dsp firmware to latest version
The version of this firmware release is 9.22.00.1118
The md5sum of this firmware binary is 469dfcf5b2ebbc58505a0cca23303723
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
This updates Kabylake audio dsp firmware to latest version.
The version of this firmware release is 9.21.00.1037
The md5sum of this firmware binary is e71a2421565fadae228b3924d9510bcb.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
1.26 is the stable and recommended firmware for Skylake.
However one conflict in i915 accidentally restored 1.23
making that the default in some kernel out there.
So, let's restore this 1.23 here.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97182
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This updates Skylake audio dsp firmware, this version contains update to
support setting of multiple coefficients with one large IPC.
The version of this firmware release is 8.20.00.958.
The md5sum of this firmware binary is 02bd300f5ef85ae04afffd7c0ef50c46.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Update firmware to v2.6, it support standby, controlled by mailbox
commend. And update the licence.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
The firmware source (alongside with the usbduxsigma.c)
was updated in 2015 during a major rewrite but
its binary was still the old one which caused the
kernel driver to fail. This fix provides the matching
firmware binary. This was created by invoking
"make -f Makefile_dux" which creates the firmware binary.
Signed-off-by: tech@linux-usb-daq.co.uk
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This dptx firmware is required by rk3399 Type-C DisplayPort controller.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This adds Kabylake audio dsp firmware
The version of this firmware release is 9.21.00.701
The md5sum of this firmware binary is 7d937bb2919031a8a4ed5427b5e6a108
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Revision number: 352738
Build number: WFFW28817_L14LIN
This is the last firmware that supports 3160 / 7260 / 7265.
Newer firmware will support 7265D and up only.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
There was a driver (btusb.c) change to include the device's
HW_VARIANT in the filename to support multiple devices and
this patch fixes the firmware filename for WsP to align with
that patch.
WsP(WindStorm Peak) is also known as Intel Bluetooth 8264.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Video Processor Unit is a HW video controller. It controls
HW Codec including H.264/VP8/VP9 Decode, H.264/VP8 Encode
and Image Processor (scale/rotate/color convert). This patch
is to support H.264/VP8 encode.
Release Version: 1.0.0
Signed-off-by: Andrew-CT Chen <andrew-ct.chen@mediatek.com>
i915 now loads the specific major/minor version of the firmware
instead of loading the symbolic links.
So this patch also removes symbolic links from the firmware
components that never had the firmware loaded directly and
let the symbolic links only for the cases where some versions
of i915 might load the symbolic link while new versions loads
the file directly.
I considered making copies but this would
increase this repository size in ~ 25%.
The symbolic links now on shall never be updated.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This is the first version of the FW for KBL.
Although we are stepping back from symbolic links,
when kbl_dmc_ver1_01 was introduced there was the link
so let's keep it around for a while.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Following additions from previous version
1. Updated FW to wait for all PLLs to turn on for complete power on.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This updates Skylake audio dsp firmware, this version contains
update required for latest TP modules.
The version of this firmware release is 8.20.00.951.
The md5sum of this firmware binary is b9eb803923ea32f68599d20a5793d13a.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
This updates Broxton audio dsp firmware, this version contains
some odd update and is signed with production keys
The version of this firmware release is 9.00.00.702
The md5sum of this firmware binary is 15cf66d804f8d275a607108bb4b57c42
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Taken from internal git commit:
93fe00be2cadd7c2073baf578ee00c26fec5706c
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Ben Hutchings