The ntohl and htonl macros are redefined because the provided macros were
not always optimal. Sometimes it was a function call, sometimes it was a
macro which did the shifting. Using the 'bswap' opcode on x86 provides
probably better performance than performing the shifting.
These macros are only overwritten on x86 if the "optimized" version is
available.
The ntohll and htonll macros are not available on every platform (at
least glibc does not provide them) which means they need to be defined
once the endianness of the system is determined.
In order to get a more symmetrical setup, redfine the macros once the
endianness of the system has been determined.
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Microsoft Visual C++ (MSVC) compiler (as of Visual Studio 2022
version 17.13.6) does not define __BYTE_ORDER__ and its C-library does
not define __BYTE_ORDER. The compiler is supported only on arm64 and x86
which are all little endian.
Define GIT_BYTE_ORDER on msvc as little endian to avoid further checks.
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The __BYTE_ORDER__ define is provided by gcc (since ~v4.6), clang
(since ~v3.2) and icc (since ~16.0.3).
The __BYTE_ORDER and BYTE_ORDER macros are libc specific and are not
available on all supported platforms such as mingw.
Add support for the __BYTE_ORDER__ macro as a fallback.
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
$GIT_TEST_INSTALLED can be set to use an "installed" git instead of the
one from $GIT_BUILD_DIR. This is used by my company's internal test
infrastructure, and not using $GIT_TEST_INSTALLED when querying the
default hash meant that the tests were failing because the hash was
effectively set to the empty string (since git didn't execute).
In the two places we attempt to detect/execute git itself prior to
overriding everything and putting it in $PATH, use identical logic for
identifying the git binary to execute. This also has the effect of
including the $X suffix when querying the default hash, but that's not
strictly necessary. You don't need to specify .exe when running a binary
on Windows, just when testing whether it exists or not.
Signed-off-by: Kyle Lippincott <spectral@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As well as receiving the config key and value, config callbacks
also receive a "struct key_value_info" containing information about
the source of the key-value pair. Accessing the "path" field of
this struct from a callback passed to repo_config() results in a
use-after-free. This happens because repo_config() first populates a
configset by calling config_with_options() and then iterates over the
configset with the callback passed by the caller. When the configset
is constructed it takes a shallow copy of the "struct key_value_info"
for each config setting. This leads to the use-after-free as the
"path" member is freed before config_with_options() returns.
We could fix this by interning the "path" field as we do
for the "filename" field but the "path" field is not actually
needed. It is populated with a copy of the "path" field from "struct
config_source". That field was added in d14d42440d (config: disallow
relative include paths from blobs, 2014-02-19) to distinguish between
relative include directives in files and those in blobs. However,
since 1b8132d99d (i18n: config: unfold error messages marked for
translation, 2016-07-28) we can differentiate these by looking at the
"origin_type" field in "struct key_value_info". So let's remove the
"path" members from "struct config_source" and "struct key_value_info"
and instead use a combination of the "filename" and "origin_type"
fields to determine the absolute path of relative includes.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the preceding commits we have migrated all users of the linked list
of multi-pack indices to instead use those stored in the object database
sources. Remove those now-unused pointers.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor `get_all_packs()` so that we stop using the linked list of
multi-pack indices. Note that there is no need to explicitly prepare
alternates, and neither do we have to use `get_multi_pack_index()`,
because `prepare_packed_git()` already takes care of populating all data
structures for us.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor `find_pack_entry()` so that we stop using the linked list of
multi-pack indices. Note that there is no need to explicitly prepare
alternates, and neither do we have to use `get_multi_pack_index()`,
because `prepare_packed_git()` already takes care of populating all data
structures for us.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function `get_multi_pack_index()` loads multi-pack indices via
`prepare_packed_git()` and then returns the linked list of multi-pack
indices that is stored in `struct object_database`. That list is in the
process of being removed though in favor of storing the MIDX as part of
the object database source it belongs to.
Refactor `get_multi_pack_index()` so that it returns the multi-pack
index for a single object source. Callers are now expected to call this
function for each source they are interested in. This requires them to
iterate through alternates, so we have to prepare alternate object
sources before doing so.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling `close_midx()` we not only close the multi-pack index for
one object source, but instead we iterate through the whole linked list
of MIDXs to close all of them. This linked list is about to go away in
favor of using the new per-source pointer to its respective MIDX.
Refactor the function to iterate through sources instead.
Note that after this patch, there's a couple of callsites left that
continue to use `close_midx()` without iterating through all sources.
These are all cases where we don't care about the MIDX from other
sources though, so it's fine to keep them as-is.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the preceding commit we refactored how we load multi-pack indices to
take a corresponding "source" as input. As part of this refactoring we
started to store a pointer to the MIDX in `struct odb_source` itself.
Refactor loading of packfiles in the same way: instead of passing in the
object directory, we now pass in the source from which we want to load
packfiles. This allows us to simplify the code because we don't have to
search for a corresponding MIDX anymore, but we can instead directly use
the MIDX that we have already prepared beforehand.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Multi-pack indices are tracked via `struct multi_pack_index`. This data
structure is stored as a linked list inside `struct object_database`,
which is the global database that spans across all of the object
sources.
This layout causes two problems:
- Object databases consist of multiple object sources (e.g. one source
per alternate object directory), where each multi-pack index is
specific to one of those sources. Regardless of that though, the
MIDX is not tracked per source, but tracked globally for the whole
object database. This creates a mismatch between the on-disk layout
and how things are organized in the object database subsystems and
makes some parts, like figuring out whether a source has an MIDX,
quite awkward.
- Multi-pack indices are an implementation detail of how efficient
access for packfiles work. As such, they are neither relevant in the
context of loose objects, nor in a potential future where we have
pluggable backends.
Refactor `prepare_multi_pack_index_one()` so that it works on a specific
source, which allows us to easily store a pointer to the multi-pack
index inside of it. For now, this pointer exists next to the existing
linked list we have in the object database. Users will be adjusted in
subsequent patches to instead use the per-source pointers.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tb/midx-avoid-cruft-packs:
repack: exclude cruft pack(s) from the MIDX where possible
pack-objects: introduce '--stdin-packs=follow'
pack-objects: swap 'show_{object,commit}_pack_hint'
pack-objects: fix typo in 'show_object_pack_hint()'
pack-objects: perform name-hash traversal for unpacked objects
pack-objects: declare 'rev_info' for '--stdin-packs' earlier
pack-objects: factor out handling '--stdin-packs'
pack-objects: limit scope in 'add_object_entry_from_pack()'
pack-objects: use standard option incompatibility functions
The `git-for-each-ref(1)` command is used to iterate over references
present in a repository. In large repositories with millions of
references, it would be optimal to paginate this output such that we
can start iteration from a given reference. This would avoid having to
iterate over all references from the beginning each time when paginating
through results.
The previous commit added 'seek' functionality to the reference
backends. Utilize this and expose a '--start-after' option in
'git-for-each-ref(1)'. When used, the reference iteration seeks to the
lexicographically next reference and iterates from there onward.
This enables efficient pagination workflows, where the calling script
can remember the last provided reference and use that as the starting
point for the next set of references:
git for-each-ref --count=100
git for-each-ref --count=100 --start-after=refs/heads/branch-100
git for-each-ref --count=100 --start-after=refs/heads/branch-200
Since the reference iterators only allow seeking to a specified marker
via the `ref_iterator_seek()`, we introduce a helper function
`start_ref_iterator_after()`, which seeks to next reference by simply
adding (char) 1 to the marker.
We must note that pagination always continues from the provided marker,
as such any concurrent reference updates lexicographically behind the
marker will not be output. Document the same.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 'ref-filter.c', there is an 'else' clause within `do_filter_refs()`.
This is unnecessary since the 'if' clause calls `die()`, which would
exit the program. So let's remove the unnecessary 'else' clause. This
improves readability since the indentation is also reduced and flow is
simpler.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ref iterator exposes a `ref_iterator_seek()` function. The name
suggests that this would seek the iterator to a specific reference in
some ways similar to how `fseek()` works for the filesystem.
However, the function actually sets the prefix for refs iteration. So
further iteration would only yield references which match the particular
prefix. This is a bit confusing.
Let's add a 'flags' field to the function, which when set with the
'REF_ITERATOR_SEEK_SET_PREFIX' flag, will set the prefix for the
iteration in-line with the existing behavior. Otherwise, the reference
backends will simply seek to the specified reference and clears any
previously set prefix. This allows users to start iteration from a
specific reference.
In the packed and reftable backend, since references are available in a
sorted list, the changes are simply setting the prefix if needed. The
changes on the files-backend are a little more involved, since the files
backend uses the 'ref-cache' mechanism. We move out the existing logic
within `cache_ref_iterator_seek()` to `cache_ref_iterator_set_prefix()`
which is called when the 'REF_ITERATOR_SEEK_SET_PREFIX' flag is set. We
then parse the provided seek string and set the required levels and
their indexes to ensure that seeking is possible.
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'find_ref_entry' function is no longer used, so remove it.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `ref_iterator` is an internal structure to the 'refs/'
sub-directory, which allows iteration over refs. All reference iteration
is built on top of these iterators.
External clients of the 'refs' subsystem use the various
'refs_for_each...()' functions to iterate over refs. However since these
are wrapper functions, each combination of functionality requires a new
wrapper function. This is not feasible as the functions pile up with the
increase in requirements. Expose the internal reference iterator, so
advanced users can mix and match options as needed.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To enable optimize multiple pathspec items in revision traversal,
return 0 if all pathspec item is literal in forbid_bloom_filters().
Add for loops to initialize and check each pathspec item's bloom_keyvec
when optimization is possible.
Add new test cases in t/t4216-log-bloom.sh to ensure
- consistent results between the optimization for multiple pathspec
items using bloom filter and the case without bloom filter
optimization.
- does not use bloom filter if any pathspec item is not literal.
With these optimizations, we get some improvements for multi-pathspec runs
of 'git log'. First, in the Git repository we see these modest results:
Benchmark 1: old
Time (mean ± σ): 73.1 ms ± 2.9 ms
Range (min … max): 69.9 ms … 84.5 ms 42 runs
Benchmark 2: new
Time (mean ± σ): 55.1 ms ± 2.9 ms
Range (min … max): 51.1 ms … 61.2 ms 52 runs
Summary
'new' ran
1.33 ± 0.09 times faster than 'old'
But in a larger repo, such as the LLVM project repo below, we get even
better results:
Benchmark 1: old
Time (mean ± σ): 1.974 s ± 0.006 s
Range (min … max): 1.960 s … 1.983 s 10 runs
Benchmark 2: new
Time (mean ± σ): 262.9 ms ± 2.4 ms
Range (min … max): 257.7 ms … 266.2 ms 11 runs
Summary
'new' ran
7.51 ± 0.07 times faster than 'old'
Signed-off-by: Derrick Stolee <stolee@gmail.com>
[ly: rename convert_pathspec_to_filter() to convert_pathspec_to_bloom_keyvec()]
Signed-off-by: Lidong Yan <502024330056@smail.nju.edu.cn>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply -N" should start from the current index and register
only new files, but it instead started from an empty index, which
has been corrected.
* rp/apply-intent-to-add-fix:
apply docs: clarify wording for --intent-to-add
t4140: test apply --intent-to-add interactions
apply: only write intents to add for new files
apply: read in the index in --intent-to-add mode
Code and test clean-up around string-list API.
* sj/string-list:
u-string-list: move "remove duplicates" test to "u-string-list.c"
u-string-list: move "filter string" test to "u-string-list.c"
u-string-list: move "test_split_in_place" to "u-string-list.c"
u-string-list: move "test_split" into "u-string-list.c"
string-list: enable sign compare warnings check
string-list: return index directly when inserting an existing element
string-list: remove unused "insert_at" parameter from add_entry
string-list: fix sign compare warnings for loop iterator
Tempfile removal fix in the codepath to sign commits with SSH keys.
* re/ssh-sign-buffer-fix:
ssh signing: don't detach the filename strbuf from key_file tempfile
A failure to open the index file for writing due to conflicting
access did not state what went wrong, which has been corrected.
* hy/read-cache-lock-error-fix:
read-cache: report lock error when refreshing index
Update ".clang-format" and ".editorconfig" to match our style guide
a bit better.
* kn/clang-format-updates:
meson: add rule to run 'git clang-format'
clang-format: add 'RemoveBracesLLVM' to the main config
clang-format: set 'ColumnLimit' to 0
"netrc" credential helper has been improved to understand textual
service names (like smtp) in addition to the numeric port numbers
(like 25).
* mc/netrc-service-names:
contrib: better support symbolic port names in git-credential-netrc
contrib: warn for invalid netrc file ports in git-credential-netrc
contrib: use a more portable shebang for git-credential-netrc
"make coccicheck" succeeds even when spatch made suggestions, which
has been updated to fail in such a case.
* jc/coccicheck-fails-make-when-it-fails:
coccicheck: fail "make" when it fails
The reftable ref backend has matured enough; Git 3.0 will make it
the default format in a newly created repositories by default.
* ps/use-reftable-as-default-in-3.0:
setup: use "reftable" format when experimental features are enabled
BreakingChanges: announce switch to "reftable" format
A diff-filter with negative-only specification like "git log
--diff-filter=d" did not trigger correctly, which has been fixed.
* jk/all-negative-diff-filter-fix:
setup_revisions(): turn on diffs for all-negative diff filter
Some code paths in the "git prune" used to ignore passed in
repository object and used the_repository singleton instance
instead, which has been corrected.
* ac/prune-wo-the-repository:
builtin/prune: stop depending on 'the_repository'
repository: move 'repository_format_precious_objects' to repo scope
Drop FreeBSD 4 support and assume we are at least at FreeBSD 6 with
memmem() supported.
* bs/config-mak-freebsd:
build: retire NO_UINTMAX_T
config.mak.uname: set NO_MEMMEM only for functional version
Use of sysctl() system call to learn the total RAM size used on
BSDs has been corrected.
* cb/total-ram-bsd-fix:
builtin/gc: correct total_ram calculation with HAVE_BSD_SYSCTL
This allows using a custom gpg program under the user's home directory
by specifying a path starting with '~'
[gpg]
program = "~/.local/bin/mygpg"
Signed-off-by: Jonas Brandstötter <jonas.brandstoetter@gmx.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When preparing to use bloom filters in a revision walk, Git populates a
boom_keyvec with an array of bloom keys for the components of a path.
Before we create the ability to map multiple pathspecs to multiple
bloom_keyvecs, extract the conversion from a pathspec to a bloom_keyvec
into its own helper method. This simplifies the state that persists in
prepare_to_use_bloom_filter() as well as makes the future change much
simpler.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Lidong Yan <502024330056@smail.nju.edu.cn>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, we stored bloom keys in a flat array and marked a commit
as NOT TREESAME if any key reported "definitely not changed".
To support multiple pathspec items, we now require that for each
pathspec item, there exists a bloom key reporting "definitely not
changed".
This "for every" condition makes a flat array insufficient, so we
introduce a new structure to group keys by a single pathspec item.
`struct bloom_keyvec` is introduced to replace `struct bloom_key *`
and `bloom_key_nr`. And because we want to support multiple pathspec
items, we added a bloom_keyvec * and a bloom_keyvec_nr field to
`struct rev_info` to represent an array of bloom_keyvecs. This commit
still optimize only one pathspec item, thus bloom_keyvec_nr can only
be 0 or 1.
New bloom_keyvec_* functions are added to create and destroy a keyvec.
bloom_filter_contains_vec() is added to check if all key in keyvec is
contained in a bloom filter.
Signed-off-by: Lidong Yan <502024330056@smail.nju.edu.cn>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git code style requires that functions operating on a struct S
should be named in the form S_verb. However, the functions operating
on struct bloom_key do not follow this convention. Therefore,
fill_bloom_key() and clear_bloom_key() are renamed to bloom_key_fill()
and bloom_key_clear(), respectively.
Signed-off-by: Lidong Yan <502024330056@smail.nju.edu.cn>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In bloom.h, murmur3_seeded_v2() is exported for the use of test murmur3
hash. To clarify that murmur3_seeded_v2() is exported solely for testing
purposes, a new helper function test_murmur3_seeded() was added instead
of exporting murmur3_seeded_v2() directly.
Signed-off-by: Lidong Yan <502024330056@smail.nju.edu.cn>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds a basic support of SHA256 Git repository to Gitk, so
that Gitk can show and operate on both SHA1 and SHA256 repos
gracefully. Since SHA256 has a longer ID length (64 char) than SHA1
(40 char), many field widths are adjusted to fit with it.
A caveat is that the configuration of auto selection length is shared
between SHA1 and SHA256 repos. That is, once when this value is saved
and read, it's applied to both repo types, which may result in shorter
selection than the full SHA256 ID. We may introduce another
individual config for sha256 (actually I did write in the first
version), but for simplicity, the common config is used as of writing
this.
Many lines still refer "sha1" although they may point to both SHA1 and
SHA256. They are left untouched for making the changes simpler.
This patch is based on the early work by Rostislav Krasny:
https://patchwork.kernel.org/project/git/patch/pull.979.git.1623687519832.gitgitgadget@gmail.com
I refreshed, revised and extended to the latest state.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
As executing our test suite is notoriously slow on Windows we use matrix
jobs in our CI systems to slice up tests and run them via multiple jobs.
On Meson this is done with a comparatively complex PowerShell invocation
as Meson didn't yet have a native way to slice tests like this.
I have upstreamed a new `--slice` option [1] that addresses this use
case though, which has been merged and released with Meson 1.8. Both
GitLab and GitHub CI have Meson 1.8.2 available by now, so let's update
the jobs to use that new option.
[1]: https://github.com/mesonbuild/meson/pull/14092
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update subproject wrappers to newer versions by executing `meson wrap
update` in the project's root directory
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitglossary documents Git pathspecs. One type of pathspec is the "glob"
pathspec, prefixed with the magic word "glob".
Regarding glob pathspecs, gitglossary says, '"**/foo" matches file or
directory "foo" anywhere, the same as pattern "foo".' That last phrase
('the same as pattern "foo") is incorrect. "**/foo" and "foo" are not
equivalent. "**/foo" matches foo anywhere, but "foo" does not.
This change removes the incorrect phrase from the glob pathspec doc.
Signed-off-by: Russell Hanneken <rhanneken@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace signal() with an equivalent invocation of sigaction(), but
make sure to NOT set SA_RESTART so the original code that expects
to be interrupted when children complete still works as designed.
This change has the added benefit of using BSD signal semantics reliably
and therefore not needing the rearming call in the signal handler.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A future change will start using sigaction to setup a SIGCHLD signal
handler.
The current code uses signal(), which returns SIG_ERR (but doesn't
seem to set errno) so instruct sigaction() to do the same.
A new SA flag will be needed, so copy the one from Cygwin; note that
the sigaction() implementation that is provided won't use it, so
its value is otherwise irrelevant.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Compiling Git fails on Amazon Linux 2 when using GCC 7.3.1 with the
following compiler error:
In file included from compat/posix.h:449:0,
from git-compat-util.h:26,
from daemon.c:3:
compat/../sane-ctype.h:29:60: error: expected expression before ']' token
#define sane_istest(x,mask) ((sane_ctype[(unsigned char)(x)] & (mask)) != 0)
^
compat/../sane-ctype.h:29:72: error: expected ')' before '!=' token
#define sane_istest(x,mask) ((sane_ctype[(unsigned char)(x)] & (mask)) != 0)
^
compat/../sane-ctype.h:29:60: error: expected expression before ']' token
#define sane_istest(x,mask) ((sane_ctype[(unsigned char)(x)] & (mask)) != 0)
^
... lots of similar lines ...
compat/../sane-ctype.h:45:50: error: expected declaration specifiers or '...' before numeric constant
#define toupper(x) sane_case((unsigned char)(x), 0)
^
/usr/include/ctype.h:142:12: error: expected identifier or '(' before 'int'
extern int isascii (int __c) __THROW;
^
compat/../sane-ctype.h:30:26: error: expected ')' before '&' token
#define isascii(x) (((x) & ~0x7f) == 0)
^
compat/../sane-ctype.h:30:35: error: expected ')' before '==' token
#define isascii(x) (((x) & ~0x7f) == 0)
^
In file included from /usr/include/features.h:423:0,
from /usr/include/unistd.h:25,
from compat/posix.h:90,
from git-compat-util.h:26,
from daemon.c:3:
compat/../sane-ctype.h:44:30: error: expected declaration specifiers or '...' before '(' token
#define tolower(x) sane_case((unsigned char)(x), 0x20)
^
compat/../sane-ctype.h:44:50: error: expected declaration specifiers or '...' before numeric constant
#define tolower(x) sane_case((unsigned char)(x), 0x20)
^
compat/../sane-ctype.h:45:30: error: expected declaration specifiers or '...' before '(' token
#define toupper(x) sane_case((unsigned char)(x), 0)
^
compat/../sane-ctype.h:45:50: error: expected declaration specifiers or '...' before numeric constant
#define toupper(x) sane_case((unsigned char)(x), 0)
^
This error bisect back to 75a044f748 (git-compat-util.h: split out
POSIX-emulating bits, 2025-02-18), where lots of bits got split out of
"git-compat-util.h" into a new "compat/posix.h" header.
The compiler error isn't immediately obvious, doubly so because the
actual errors are ~3x as long as the above snippet. But what happens
here is that we transitively include <ctype.h> after we have included
our own "sane-ctype.h" header. Consequently, the function declarations
that exist in <ctype.h> for isascii(3p) et al will be mangled by our
macros of the same type. The result is of course completely broken.
It's unclear why this issue only happens on Amazon Linux 2. My guess is
that it's either specific to the compiler version or specific to the
glibc version. We don't explicitly include <ctypes.h> anywhere, but it's
being transitively included. So chances are that later versions of the
toolchain reorganized their headers so that <ctypes.h> is not included
transitively anymore.
Fix the issue by explicitly including <ctype.h> in "sane-ctype.h". This
ensures that the header guards will be activated and that any subsequent
include of the same header will become a no-op. With this we can then
safely override the function declarations with our own macros.
Reported-by: Stan Hu <stanhu@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sebastian Andrzej Siewior