In 036876a106 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove
`git_config_get_string_multi()`. All callsites are adjusted so that they
use `repo_config_get_string_multi(the_repository, ...)` instead. While
some callsites might already have a repository available, this
mechanical conversion is the exact same as the current situation and
thus cannot cause any regression. Those sites should eventually be
cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a106 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_get_value()`. All
callsites are adjusted so that they use
`repo_config_get_value(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a106 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_get_value()`. All
callsites are adjusted so that they use
`repo_config_get_value(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a106 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_get()`. All
callsites are adjusted so that they use `repo_config_get(the_repository,
...)` instead. While some callsites might already have a repository
available, this mechanical conversion is the exact same as the current
situation and thus cannot cause any regression. Those sites should
eventually be cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a106 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_clear()`. All
callsites are adjusted so that they use
`repo_config_clear(the_repository, ...)` instead. While some callsites
might already have a repository available, this mechanical conversion is
the exact same as the current situation and thus cannot cause any
regression. Those sites should eventually be cleaned up in a later patch
series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a106 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config()`. All callsites
are adjusted so that they use `repo_config(the_repository, ...)`
instead. While some callsites might already have a repository available,
this mechanical conversion is the exact same as the current situation
and thus cannot cause any regression. Those sites should eventually be
cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
find_cfg_ent() allocates a struct reflog_expire_entry_option via
FLEX_ALLOC_MEM and inserts it into a linked list in the
reflog_expire_options structure. The entries in this list are never
freed, resulting in a leak in cmd_reflog_expire and the gc reflog expire
maintenance task:
Direct leak of 39 byte(s) in 1 object(s) allocated from:
#0 0x7ff975ee6883 in calloc (/lib64/libasan.so.8+0xe6883)
#1 0x0000010edada in xcalloc ../wrapper.c:154
#2 0x000000df0898 in find_cfg_ent ../reflog.c:28
#3 0x000000df0898 in reflog_expire_config ../reflog.c:70
#4 0x00000095c451 in configset_iter ../config.c:2116
#5 0x0000006d29e7 in git_config ../config.h:724
#6 0x0000006d29e7 in cmd_reflog_expire ../builtin/reflog.c:205
#7 0x0000006d504c in cmd_reflog ../builtin/reflog.c:419
#8 0x0000007e4054 in run_builtin ../git.c:480
#9 0x0000007e4054 in handle_builtin ../git.c:746
#10 0x0000007e8a35 in run_argv ../git.c:813
#11 0x0000007e8a35 in cmd_main ../git.c:953
#12 0x000000441e8f in main ../common-main.c:9
#13 0x7ff9754115f4 in __libc_start_call_main (/lib64/libc.so.6+0x35f4)
#14 0x7ff9754116a7 in __libc_start_main@@GLIBC_2.34 (/lib64/libc.so.6+0x36a7)
#15 0x000000444184 in _start (/home/jekeller/libexec/git-core/git+0x444184)
Close this leak by adding a reflog_clear_expire_config() function which
iterates the linked list and frees its elements. Call it upon exit of
cmd_reflog_expire() and reflog_expire_condition().
Add a basic test which covers this leak. While at it, cover the
functionality from commit commit 3cb22b8efe (Per-ref reflog expiry
configuration, 2008-06-15). We've had this support for years, but lacked
any tests.
Co-developed-by: Jeff King <peff@peff.net>
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a resource leak where the file descriptor was not closed after
truncating a file in t/helper/test-truncate.c.
Signed-off-by: Hoyoung Lee <lhywkd22@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of https://github.com/j6t/gitk: (21 commits)
gitk: remove header of now empty section "General options"
gitk: separate upstream refs when using the sort-by-type option
gitk: make 'sort-refs-by-type' optional and persistent
gitk: sort by ref type on the 'tags and heads' view
gitk: choosefont - remove a stray debugging line
gitk: allow horizontal commit-graph scrolling
gitk: update aqua scrolling for TclTk 8.6 / TIP171
gitk: update x11 scrolling for TclTk 8.6 / TIP 171
gitk: update win32 scrolling for Tk 8.6 / TIP 171
gitk: mousewheel scrolling functions for Tk 8.6
gitk: wheel scrolling multiplier preference
gitk: separate x11 / win32 / aqua Mouse bindings
gitk: remove non-ttk support code
gitk: replace ${NS} with ttk
gitk: always use themed Tk (ttk)
gitk: use $config_variables as list for save/restore
gitk: remove implementations for Tcl/Tk < 8.6
gitk: Make TclTk 8.6 the minimum, allow 8.7
gitk: remove code targeting git <= 1.7.2
gitk: require git >= 2.20
...
These cases cover scenarios where `gpg.program` is set as a program in
`$PATH` or as a path relative to the user's home directory.
Signed-off-by: Jonas Brandstötter <jonas.brandstoetter@gmx.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier commit remove the only option that was available under
"General options". We don't need the header for the empty section.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
* mr/sort-refs-by-type:
gitk: separate upstream refs when using the sort-by-type option
gitk: make 'sort-refs-by-type' optional and persistent
gitk: sort by ref type on the 'tags and heads' view
The output `git imap-send --list` command can be a bit confusing for new
users since the IMAP LIST command output is very verbose. Help such users
to analyse the same by using an example output.
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Optimize pop_most_recent_commit() by adding the first parent using the
more efficient prio_queue_peek() and prio_queue_replace() instead of
prio_queue_get() and prio_queue_put().
On my machine this neutralizes the performance hit it took in Git's own
repository when we converted it to prio_queue two patches ago (git_pq):
$ hyperfine -w3 -L git ./git_2.50.1,./git_pq,./git '{git} rev-parse :/^Initial.revision'
Benchmark 1: ./git_2.50.1 rev-parse :/^Initial.revision
Time (mean ± σ): 1.073 s ± 0.003 s [User: 1.053 s, System: 0.019 s]
Range (min … max): 1.069 s … 1.078 s 10 runs
Benchmark 2: ./git_pq rev-parse :/^Initial.revision
Time (mean ± σ): 1.077 s ± 0.002 s [User: 1.057 s, System: 0.018 s]
Range (min … max): 1.072 s … 1.079 s 10 runs
Benchmark 3: ./git rev-parse :/^Initial.revision
Time (mean ± σ): 1.069 s ± 0.003 s [User: 1.049 s, System: 0.018 s]
Range (min … max): 1.065 s … 1.074 s 10 runs
Summary
./git rev-parse :/^Initial.revision ran
1.00 ± 0.00 times faster than ./git_2.50.1 rev-parse :/^Initial.revision
1.01 ± 0.00 times faster than ./git_pq rev-parse :/^Initial.revision
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function to replace the top element of the queue that basically
does the same as prio_queue_get() followed by prio_queue_put(), but
without the work by prio_queue_get() to rebalance the heap. It can be
used to optimize loops that get one element and then immediately add
another one. That's common e.g., with commit history traversal, where
we get out a commit and then put in its parents.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pop_most_recent_commit() calls commit_list_insert_by_date() for parent
commits, which is itself called in a loop. This can lead to quadratic
complexity if there are many merges. Replace the commit_list with a
prio_queue to ensure logarithmic worst case complexity and convert all
three users.
Add a performance test that exercises one of them using a pathological
history that consists of 50% merges and 50% root commits to demonstrate
the speedup:
Test v2.50.1 HEAD
----------------------------------------------------------------------
1501.2: rev-parse ':/65535' 2.48(2.47+0.00) 0.20(0.19+0.00) -91.9%
Alas, sane histories don't benefit from the conversion much, and
traversing Git's own history takes a 1% performance hit on my machine:
$ hyperfine -w3 -L git ./git_2.50.1,./git '{git} rev-parse :/^Initial.revision'
Benchmark 1: ./git_2.50.1 rev-parse :/^Initial.revision
Time (mean ± σ): 1.071 s ± 0.004 s [User: 1.052 s, System: 0.017 s]
Range (min … max): 1.067 s … 1.078 s 10 runs
Benchmark 2: ./git rev-parse :/^Initial.revision
Time (mean ± σ): 1.079 s ± 0.003 s [User: 1.060 s, System: 0.017 s]
Range (min … max): 1.074 s … 1.083 s 10 runs
Summary
./git_2.50.1 rev-parse :/^Initial.revision ran
1.01 ± 0.00 times faster than ./git rev-parse :/^Initial.revision
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comment is poorly phrased and it in't clear what it wanted to
say. Strongly discourage this broken pattern to be copied and
pasted to other code paths.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The structure has nothing to do with what "git bisect" does; as
nobody other than "git rev-list" implementation uses it, move it
as a private data type to builtin/rev-list.c
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-gui has _search_exe as needed to give the executable suffix
(.exe) on Windows. But, the prior commit eliminated the only user of
this variable. Delete it.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
gitexec looks up and caches the method to execute git subcommands using
the long deprecated dashed form if found in $(git--exec-path). But,
git_read and git_write now use the dashless form, by-passing gitexec.
This leaves two remaining uses of gitexec: one during startup to define
use of an ssh_key helper, and one in the about dialog box. These are
neither performance critical nor likely to be called more than once, so
do not justify an otherwise unused cacheing system.
Let's change those two uses, making gitexec unused. This allows removing
gitexec and _git_cmd.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
git-gui implements its own approach to locating and running various git
subcommands, bypassing git's capabilities for running git-*. This was
written in 2007: at that time, many git commands were shell-scripts
stored in $(git --exec-path), git's run-command api was not well adapted
to Windows and had serious performance issues when it worked at all, and
running subcommand 'git foo' as 'git-foo' was common and fully supported.
On Windows, git-gui searches $(git --exec-path) for builtin commands,
then attempts to find an interpreter on PATH to run those, invoking
these differently than on other platforms. For instance, the explicit
shebang #!/usr/bin/perl found in a script will be run by the first Perl
interpreter found on $PATH, which might not be at that specific location
so could be different than what git would run.
The various issues leading to the current implemention no longer exist.
Most git commands are now builtins, links to run those are not installed
in $(git --exec-path) by default (the "dashless" form is recommended
instead), and git's run-command api works well everywhere.
So, let's use git to launch its subcommands on all platforms. Do so by
modifying procs git_read and git_write to use the "dashless" form for
invoking git commands, avoiding the search for git-<foo>. This leaves
_git_cmd unused with cleanup in a later patch.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
git-gui's default clone method is git-clone's default, and this uses
hardlinks rather than copying the objects directory for local
repositories. However, this method explicitly fails if a symlink (or
.gitfile) exists in the path to the objects directory. Thus, the default
clone option fails for worktrees created by git-new-workdir or
git-worktree. git-gui's original do_clone trapped this error for a
symlinked git-new-workdir tree, directly falling back to a full clone,
while the updated git-gui using git-clone does not. (The old do_clone
could not handle gitfile linked worktrees, however).
Let's apply the more friendly fallback to a full clone in both these
cases where git-clone behavior throws an error on the default method.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
git-gui clones a repository by invoking git-plumbing commands, in proc
do_clone, rather than using git-clone. The justification was that the
low-level commands are guaranteed to provide a stable interface, while
the higher level commands such as git-clone may not be stable. This
approach requires git-gui to continually evolve by mirroring new
features in git itself, which has not happened, while the user interface
in git-clone has proven very stable. Also, git-gui does directly call
many other non-plumbing commands in git's repertoire.
do_clone's last significant functionality change was in 2015, and
updates are required for shallow clones, the reftable backend, cloning
from linked worktrees, and perhaps other features and bugs. For
instance, I had reports of git-gui failing to correctly clone
repositories prior to 2015, resulting in essentially the patch given
here. The only significant work was supporting .gitfile linked worktrees
unknown to do_clone, but supported by git-clone, and none regarding the
interface to git-clone itself. That interface is clearly stable enough
to not be a problem.
Supporting new use-cases with this requires exposing new options in the
clone dialog, then passing flags to git-clone. This avoids updating
do_clone to understand those options, reducing the maintenance burdens.
So, teach git-gui to use git-clone. This change is in one patch as
there is no obvious incremental path to migration. The existing dialog /
options / status screen are unchanged, the known user-visible changes
are that cloning from a working directory linked by a gitfile now works,
there is no auto-fallback to a full copy when cloning linked workdirs
and worktrees (meaning git-clone fails unless a full or shared copy is
selected), and messages displayed are from git-clone.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Git uses `rebase.autostash` or `merge.autostash` to determine whether a
dirty worktree is allowed during pull. However, this behavior is not
clearly documented, making it difficult for users to discover how to
enable autostash, or causing them to unknowingly enable it. Add new
config option `pull.autostash` along with its documentation and test
cases.
`pull.autostash` provides the same functionality as `rebase.autostash`
and `merge.autostash`, but overrides them when set. If `pull.autostash`
is not set, it falls back to `rebase.autostash` or `merge.autostash`,
depending on the value of `pull.rebase`.
Signed-off-by: Lidong Yan <yldhome2d2@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We added the --early-output feature long ago in cdcefbc971 (Add
"--early-output" log flag for interactive GUI use, 2007-11-03). The idea
was that GUIs could use it to progressively render a history view,
showing something quick-and-inaccurate at first and then enhancing it
later.
But we never documented it, and it appears never to have been used, even
by the projects which initially expressed interest. There was an RFC
patch for gitk to use it:
http://public-inbox.org/git/18221.2285.259487.655684@cargo.ozlabs.ibm.com/
but it was never merged. Likewise QGit had a patch in:
https://lore.kernel.org/git/e5bfff550711040225ne67c907r2023b1354c35f35@mail.gmail.com/
but it was never fully merged (to this day, QGit has a commented-out line to
add "--early-output" to the "log" invocation). Searching for other
mentions on the web or forges like github.com turns up nothing.
Meanwhile, the feature has been broken off and on over the years without
anybody noticing (and naturally, there are no tests, either). From 2011
to 2017 the option didn't even turn on via "--early-output"; this was
fixed in e35b6ac56f (revision.h: turn rev_info.early_output back into an
unsigned int, 2017-06-10).
It worked for a while then, but it does not interact well at all with
commit-graphs (which are turned on by default these days). The main
logic to count early commits is triggered by limit_list(), which we
traditionally invoked when showing output in topo-order (and
--early-output always enables --topo-order). But that changed in
f0d9cc4196 (revision.c: begin refactoring --topo-order logic,
2018-11-01). Now when we have generation numbers, we skip limit_list()
entirely, and the early-output code shows no commits, and just the final
header "Final output: 1 done". Which is syntactically OK, but
semantically wrong: that message should give the total number of commits
we're about to show.
So let's drop the feature. It is extra code that is untested and
undocumented, and makes working on the revision machinery more brittle.
Given the history above, it seems unlikely that anybody is using it (or
has used it), and we can drop it without the usual deprecation period.
A gentler option might be to "soft" drop it: keep accepting the option,
have it imply --topo-order as it does now, print "Final output: 1 done",
and then do our regular traversal. That would keep any hypothetical
caller working. But it doesn't seem worth the hassle to me.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gpg.program configuration variable, which names a pathname to
the (custom) GPG compatible program, can now be spelled with ~tilde
expansion.
* jb/gpg-program-variable-is-a-pathname:
gpg-interface: expand gpg.program as a path
Futz with SIGCHLD handling in "git daemon".
* cb/daemon-reap-children:
daemon: use sigaction() to install child_handler()
compat/mingw: allow sigaction(SIGCHLD)
Doc mark-up updates.
* ja/doc-git-log-markup:
doc: git-log: convert log config to new doc format
doc: git-log: convert diff options to new doc format
doc: git-log: convert pretty formats to new doc format
doc: git-log: convert pretty options to new doc format
doc: git-log: convert rev list options to new doc format
doc: git-log: convert line range format to new doc format
doc: git-log: convert line range options to new doc format
doc: git-log convert rev-list-description to new doc format
doc: convert git-log to new documentation format
Meson-based build update.
* ps/meson-cleanups:
ci: use Meson's new `--slice` option
meson: update subproject wrappers
meson: fix lookup of shell on MINGW64
meson: clean up unnecessary variables
meson: improve summary of auto-detected features
meson: stop printing 'https' option twice in our summaries
meson: stop discovering native version of Python
"git remote" now detects remote names that overlap with each other
(e.g., remote nickname "outer" and "outer/inner" are used at the
same time), as it will lead to overlapping remote-tracking
branches.
* jk/remote-avoid-overlapping-names:
remote: detect collisions in remote names
"pack-objects" has been taught to avoid pointing into objects in
cruft packs from midx.
* tb/midx-avoid-cruft-packs:
repack: exclude cruft pack(s) from the MIDX where possible
pack-objects: introduce '--stdin-packs=follow'
pack-objects: swap 'show_{object,commit}_pack_hint'
pack-objects: fix typo in 'show_object_pack_hint()'
pack-objects: perform name-hash traversal for unpacked objects
pack-objects: declare 'rev_info' for '--stdin-packs' earlier
pack-objects: factor out handling '--stdin-packs'
pack-objects: limit scope in 'add_object_entry_from_pack()'
pack-objects: use standard option incompatibility functions
Prepare to flip the default hash function to SHA-256.
* bc/use-sha256-by-default-in-3.0:
Enable SHA-256 by default in breaking changes mode
help: add a build option for default hash
t5300: choose the built-in hash outside of a repo
t4042: choose the built-in hash outside of a repo
t1007: choose the built-in hash outside of a repo
t: default to compile-time default hash if not set
setup: use the default algorithm to initialize repo format
Use legacy hash for legacy formats
builtin: use default hash when outside a repository
hash: add a constant for the legacy hash algorithm
hash: add a constant for the default hash algorithm
git-gui has code paths to support older non-ttk widgets, but this code
is no longer reachable as ttk is always used. Remove that code.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Since the upstream refs of local refs may be of more significance in the
context of the local refs, they are sorted after local refs and before the
remainder of the remote refs.
Signed-off-by: Michael Rappazzo <michael.rappazzo@infor.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
On the 'tags and heads' view, add an option to enable or disable
'Sort refs by type'. This option is read from and written to the
config file. Clicking on the option will update the refs in the
view.
Signed-off-by: Michael Rappazzo <michael.rappazzo@infor.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
In the 'tags and heads' view, the list of refs was globally sorted,
which caused the local ref list to be split around other ref list types.
This change re-orders the view to be: local refs, remote refs, tags,
and then other refs.
Signed-off-by: Michael Rappazzo <rappazzo@gmail.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
git-gui uses ${NS} to switch between non-themed and themed widgets, with
${NS} == 'ttk' selecting the latter. As git-gui now always uses ttk,
this indirection is not needed. Remove it.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
git-gui optionally uses themed ui elements from ttk, but the full set of
ttk ui elements is always available with Tk 8.6. Keeping code making
ttk use optional increases maintenance burden for no benefit. Let's use
ttk always, allowing removal of alternate code paths in subsequent
patches.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Since commit c80d7be5e1, git-gui checks for the availability of ttk
before enabling its use, but this check is redundant as Tk >= 8.6 is
required. Remove the redundant check.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
git-gui has remnant code to allow some drawing with Tk 8.4 predating the
addition of themed widgets. As git-gui requires Tk >= 8.6, this code can
never trigger. Remove it.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
git-version supports choosing different bodies of code passed into it,
rather than using the more traditional if/else construct typically used.
The only use of git-version in this mode was by its author in 2007, and
that code has been deleted. So, delete this now unused function that
was mostly ignored.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
When creating a new repository, git-gui creates a directory, cds to it,
then runs git-init, but git-init learned to create and initialize the
directory in 1.6.5. git-gui requires git version >= 2.36, so teach
git-gui to use git-init's full capability.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
git-gui checks for git version >= 1.6.6 before enabling the remotes
menu. But git-gui requires git v2.36 or later, so git-remote is always
available. Delete this check and always enable the menu.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Patrick Steinhardt