The "git branch" command, while not in listing mode, calls create_branch()
even when the target branch already exists, and it does so even when it is
not interested in updating the value of the branch (i.e. the name of the
commit object that sits at the tip of the existing branch). This happens
when the command is run with "--set-upstream" option.
The earlier safety-measure to prevent "git branch -f $branch $commit" from
updating the currently checked out branch did not take it into account,
and we no longer can update the tracking information of the current branch.
Minimally fix this regression by telling the validation code if it is
called to really update the value of a potentially existing branch, or if
the caller merely is interested in updating auxiliary aspects of a branch.
Reported-and-Tested-by: Jay Soffian
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the error message when doing: "git branch @{-1}",
"git checkout -b @{-1}", or "git branch -m foo @{-1}"
* was: A branch named '@{-1}' already exists.
* now: A branch named 'bar' already exists.
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch -M <foo> <current-branch>" allows updating the current branch
which HEAD points, without the necessary house-keeping that git reset
normally does to make this operation sensible. It also leaves the reflog
in a confusing state (you would be warned when trying to read it).
"git checkout -B <current branch> <foo>" is also partly vulnerable to this
bug; due to inconsistent pre-flight checks it would perform half of its
task and then abort just before rewriting the branch. Again this
manifested itself as the index file getting out-of-sync with HEAD.
"git branch -f" already guarded against this problem, and aborts with
a fatal error.
Update "git branch -M", "git checkout -B" and "git branch -f" to share the
same check before allowing a branch to be created. These prevent you from
updating the current branch.
We considered suggesting the use of "git reset" in the failure message
but concluded that it was not possible to discern what the user was
actually trying to do.
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Detected by "gcc -std=iso9899:1990 ...". This patch applies against
"maint".
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A malicious server can return ACK with non-existent SHA-1 or not a
commit. lookup_commit() in this case may return NULL. Do not let
fetch-pack crash by accessing NULL address in this case.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first paragraph about flag order is no longer true and is
mentioned in git-checkout-index.txt. The rest is also mentioned in
git-checkout-index.txt.
Remove it and keep uptodate document in one place.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/submodule-add-relurl-wo-upstream:
submodule add: clean up duplicated code
submodule add: allow relative repository path even when no url is set
submodule add: test failure when url is not configured in superproject
Conflicts:
git-submodule.sh
* js/ls-tree-error:
Ensure git ls-tree exits with a non-zero exit code if read_tree_recursive fails.
Add a test to check that git ls-tree sets non-zero exit code on error.
* jn/mime-type-with-params:
gitweb: Serve */*+xml 'blob_plain' as text/plain with $prevent_xss
gitweb: Serve text/* 'blob_plain' as text/plain with $prevent_xss
* jc/zlib-wrap:
zlib: allow feeding more than 4GB in one go
zlib: zlib can only process 4GB at a time
zlib: wrap deflateBound() too
zlib: wrap deflate side of the API
zlib: wrap inflateInit2 used to accept only for gzip format
zlib: wrap remaining calls to direct inflate/inflateEnd
zlib wrapper: refactor error message formatter
* bc/submodule-foreach-stdin-fix-1.7.4:
git-submodule.sh: preserve stdin for the command spawned by foreach
t/t7407: demonstrate that the command called by 'submodule foreach' loses stdin
* jk/combine-diff-binary-etc:
combine-diff: respect textconv attributes
refactor get_textconv to not require diff_filespec
combine-diff: handle binary files as binary
combine-diff: calculate mode_differs earlier
combine-diff: split header printing into its own function
If a file is unchanged but stat-dirty, we may erroneously
fail to apply patches, thinking that they conflict with a
dirty working tree.
This patch adds a call to "update-index --refresh". It comes
as late as possible, so that we don't bother with it for
thinks like "git rebase --abort", or when mbox-splitting
fails. However, it does come before we actually start
applying patches, meaning we will only call it once when we
start applying patches (or any time we return to "am" after
having resolved conflicts), and not once per patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to `git help filter-branch':
--commit-filter <command>
...
You can use the _map_ convenience function in this filter,
and other convenience functions, too...
...
However, it turns out that `map' hasn't been usable because it depends
on the variable `workdir', which is not propogated to the environment
of the shell that runs the commit-filter <command> because the
shell is created via a simple-command rather than a compound-command
subshell:
@SHELL_PATH@ -c "$filter_commit" "git commit-tree" \
$(git write-tree) $parentstr < ../message > ../map/$commit ||
die "could not write rewritten commit"
One solution is simply to export `workdir'. However, it seems rather
heavy-handed to export `workdir' to the environments of all commands,
so instead this commit exports `workdir' for only the duration of the
shell command in question:
workdir=$workdir @SHELL_PATH@ -c "$filter_commit" "git commit-tree" \
$(git write-tree) $parentstr < ../message > ../map/$commit ||
die "could not write rewritten commit"
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
user-manual.pdf is not removed by `make clean'; fix it.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
user-manual.pdf is generated by the build and therefore
should be ignored by git.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many pathnames in a fast-import stream need to be quoted. In
particular:
1. Pathnames at the end of an "M" or "D" line need quoting
if they contain a LF or start with double-quote.
2. Pathnames on a "C" or "R" line need quoting as above,
but also if they contain spaces.
For (1), we weren't quoting at all. For (2), we put
double-quotes around the paths to handle spaces, but ignored
the possibility that they would need further quoting.
This patch checks whether each pathname needs c-style
quoting, and uses it. This is slightly overkill for (1),
which doesn't actually need to quote many characters that
vanilla c-style quoting does. However, it shouldn't hurt, as
any implementation needs to be ready to handle quoted
strings anyway.
In addition to adding a test, we have to tweak a test which
blindly assumed that case (2) would always use
double-quotes, whether it needed to or not.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the author forgets the gitignore entry the built result will show up
as new file in the git working directory.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new wording makes it clearer that such a beast is an attribute in
addition to being a macro (as opposed to being only a macro that is
used for attributes).
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, make it clear that attribute macros are themselves
recorded as attributes in addition to setting other attributes.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When executing "git pull" with no arguments, the reflog message was:
"pull : Fast-forward"
Signed-off-by: Ori Avtalion <ori@avtalion.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nk/ref-doc:
glossary: clarify description of HEAD
glossary: update description of head and ref
glossary: update description of "tag"
git.txt: de-emphasize the implementation detail of a ref
check-ref-format doc: de-emphasize the implementation detail of a ref
git-remote.txt: avoid sounding as if loose refs are the only ones in the world
git-remote.txt: fix wrong remote refspec
* an/shallow-doc:
Document the underlying protocol used by shallow repositories and --depth commands.
Fix documentation of fetch-pack that implies that the client can disconnect after sending wants.
In ba50532, the variable 'cnt' was added to both the IPv6 and the
IPv4 version of git_tcp_connect_sock, intended to identify which
network adapter the connection failed on. But in the IPv6 version,
the variable was never increased, leaving it constantly at zero.
This behaviour isn't very useful, so let's fix it by increasing
the variable at every loop-iteration.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it easier to grok under what conditions we can skip lstat().
While at there, shorten ie_match_stat() line for the sake of my eyes.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the tests in t7400 fails if the trash directory has a
symlink anywhere in its path. E.g.:
$ mkdir /tmp/git-test
$ mkdir /tmp/git-test/real
$ ln -s real /tmp/git-test/link
$ ./t7400-submodule-basic --root=/tmp/git-test/real
...
# passed all 44 test(s)
$ ./t7400-submodule-basic --root=/tmp/git-test/link
...
not ok - 41 use superproject as upstream when path is relative and no url is set there
The failing test does:
git submodule add ../repo relative &&
...
git submodule sync relative &&
test "$(git config submodule.relative.url)" = "$submodurl/repo"
where $submodurl comes from the $TRASH_DIRECTORY the user
gave us. However, git will resolve symlinks when converting
the relative path into an absolute one, leading them to be
textually different (even though they point to the same
directory).
Fix this by asking pwd to canonicalize the name of the trash
directory for us.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the entry_count is -1, the tree is invalidated and therefore has
not associated hash (or object name). Explicitly state that the next
entry starts after the newline.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the --quiet flag "git submodule update" and "git submodule add"
didn't behave as the documentation stated. They printed progress output
from the clone, even though they should only print error messages.
Fix that by passing the -q flag to git clone in module_clone() when the
GIT_QUIET variable is set. Two tests in t7400 have been modified to test
that behavior.
Reported-by: Daniel Holtmann-Rice <flyingtabmow@gmail.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case of a corrupt repository, git ls-tree may report an error but
presently it exits with a code of 0.
This change uses the return code of read_tree_recursive instead.
Improved-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano