Temporaries such as configure.ac+ and Documentation/*.xml+
sometimes remain after an interrupted build. Tell git not to
track them.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduced in 492cf3f (More precise description of 'git describe --abbrev', 2009-10-29)
Signed-off-by: Gisle Aas <gisle@aas.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's okay to use the curl helper without a local repository, so long
as you don't use "fetch". There aren't any git programs that would try
to use it, and it doesn't make sense to try it (since there's nowhere
to write the results), but we may as well be clear.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmd_ls_remote() was calling transport_get() with a NULL remote and a
non-NULL url in the case where it was run outside a git
repository. This involved a bunch of ill-tested special
cases. Instead, simply get the struct remote for the URL with
remote_get(), which works fine outside a git repository, and can also
take global options into account.
This fixes a tiny and obscure bug where "git ls-remote" without a repo
didn't support global url.*.insteadOf, even though "git clone" and
"git ls-remote" in any repo did.
Also, enforce that all callers provide a struct remote to transport_get().
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting with commit 51ea55190b,
git-compat-util.h includes compat/bswap.h
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If git clone is given more than two non-option arguments, it
silently throws away all but the first one. Complain instead.
Discovered by comparing the new builtin clone to the old
git-clone.sh.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix incorrect description of --recursive, and stop listing the historical
synonym --naked that is not advertised anywhere.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also adds a note about why the output in the examples might give
different output today.
Signed-off-by: Gisle Aas <gisle@aas.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although 'git help -a' actually doesn't need to be run inside a git
repository and uses no repository-specific information, it looks for a git
directory. On 'git <TAB><TAB>' the bash completion runs 'git help -a' and
unnecessary searching for a git directory can be annoying in auto-mount
environments. With this commit, 'git help' no longer searches for a
repository when run with the -a option.
Reported by Vincent Danjean through http://bugs.debian.org/539273
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When building Git with MSVC on Windows, directories named after the Git alias
are created for the output files, e.g. there is a "git-merge-index" directory
next to the "git-merge-index.exe" executable in the build root. Previously,
"make all" just checked if "git-merge-index" and "git-merge-index.exe" are the
same file, and if not, tried to remove "git-merge-index". This fails in the
case of "git-merge-index" being a directory, which is why this is checked now.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, when there is an invalid command, the rest of the line is
still treated as if the command had been valid, i.e. rebase -i attempts
to produce a patch, using the next argument as a SHA1 name. If there is
no next argument or an invalid one, very confusing error messages
appear (the line was '.'; path to git-rebase-todo substituted):
Unknown command: .
fatal: ambiguous argument 'Please fix this in the file $somefile.':
unknown revision or path not in the working tree.
Use '--' to separate paths from revisions
fatal: Not a valid object name Please fix this in the file $somefile.
fatal: bad revision 'Please fix this in the file $somefile.'
Instead, verify the validity of the remaining line and error out earlier
if necessary.
Signed-off-by: Jan Krüger <jk@jk.gs>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this commit, git help -i <cmd> prints an error message and exits
non-zero instead of being silent and exit code 0.
Reported by Trent W. Buck through
http://bugs.debian.org/537664
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GIT_DIFFTOOL_PROMPT doesn't have any effect if overridden with --prompt.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first argument of the tar command is interpreted as a bundle of
letters specifying the mode of operation and additional options, with
any option arguments taken from subsequent words on the command line
as needed. The implementation of tar in busybox treats this bundle
as if preceded by a dash and then parses it by getopt rules, which
mishandles 'tar xfo -'. Use 'tar xof -' instead to work this around.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a regression introduce by d68dc34 (git-describe: Die early if
there are no possible descriptions, 2009-08-06).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The loop in get_size_from_delta() feeds a deflated delta data from the
pack stream _until_ we get inflated result of 20 bytes[*] or we reach the
end of stream.
Side note. This magic number 20 does not have anything to do with the
size of the hash we use, but comes from 1a3b55c (reduce delta head
inflated size, 2006-10-18).
The loop reads like this:
do {
in = use_pack();
stream.next_in = in;
st = git_inflate(&stream, Z_FINISH);
curpos += stream.next_in - in;
} while ((st == Z_OK || st == Z_BUF_ERROR) &&
stream.total_out < sizeof(delta_head));
This git_inflate() can return:
- Z_STREAM_END, if use_pack() fed it enough input and the delta itself
was smaller than 20 bytes;
- Z_OK, when some progress has been made;
- Z_BUF_ERROR, if no progress is possible, because we either ran out of
input (due to corrupt pack), or we ran out of output before we saw the
end of the stream.
The fix b3118bd (sha1_file: Fix infinite loop when pack is corrupted,
2009-10-14) attempted was against a corruption that appears to be a valid
stream that produces a result larger than the output buffer, but we are
not even trying to read the stream to the end in this loop. If avail_out
becomes zero, total_out will be the same as sizeof(delta_head) so the loop
will terminate without the "fix". There is no fix from b3118bd needed for
this loop, in other words.
The loop in unpack_compressed_entry() is quite a different story. It
feeds a deflated stream (either delta or base) and allows the stream to
produce output up to what we expect but no more.
do {
in = use_pack();
stream.next_in = in;
st = git_inflate(&stream, Z_FINISH);
curpos += stream.next_in - in;
} while (st == Z_OK || st == Z_BUF_ERROR)
This _does_ risk falling into an endless interation, as we can exhaust
avail_out if the length we expect is smaller than what the stream wants to
produce (due to pack corruption). In such a case, avail_out will become
zero and inflate() will return Z_BUF_ERROR, while avail_in may (or may
not) be zero.
But this is not a right fix:
do {
in = use_pack();
stream.next_in = in;
st = git_inflate(&stream, Z_FINISH);
+ if (st == Z_BUF_ERROR && (stream.avail_in || !stream.avail_out)
+ break; /* wants more input??? */
curpos += stream.next_in - in;
} while (st == Z_OK || st == Z_BUF_ERROR)
as Z_BUF_ERROR from inflate() may be telling us that avail_in has also run
out before reading the end of stream marker. In such a case, both avail_in
and avail_out would be zero, and the loop should iterate to allow the end
of stream marker to be seen by inflate from the input stream.
The right fix for this loop is likely to be to increment the initial
avail_out by one (we allocate one extra byte to terminate it with NUL
anyway, so there is no risk to overrun the buffer), and break out if we
see that avail_out has become zero, in order to detect that the stream
wants to produce more than what we expect. After the loop, we have a
check that exactly tests this condition:
if ((st != Z_STREAM_END) || stream.total_out != size) {
free(buffer);
return NULL;
}
So here is a patch (without my previous botched attempts) to fix this
issue. The first hunk reverts the corresponding hunk from b3118bd, and
the second hunk is the same fix proposed earlier.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the missing definite article ("the") in several places.
Change "note to..." to "note for...", since "note to" means that
that the note is addressed to someone (source: Google search).
Change "progressbar" to "progress bar" (source: Wikipedia).
Format git commands, options, and file names consistently using
back quotes (i.e. a fixed font in the resulting HTML document).
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This enables gitk to show the patch text with correct glyphs if the locale
is not UTF-8.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This mbox file must have been added by accident in e9fe804 (git-mailinfo:
Fix getting the subject from the in-body [PATCH] line, 2008-07-14).
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This replaces an earlier patch by Björn Gustavsson,
Message-ID: <4AD75029.1010109@gmail.com>
Signed-off-by: しらいし ななこ <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git push -h' shows usage text with incomplete list of options and then
has a separate list of options that are supported. Imitate the way other
commands (I looked at 'git diff' for an example) show their options.
Signed-off-by: しらいし ななこ <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'make clean' should remove the object files from block-sha1/
instead of the non-existent mozilla-sha1/ directory.
Signed-off-by: Carlos R. Mafra <crmafra@aei.mpg.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep" would segfault if its -f option was used because it would
try to use an uninitialized strbuf, so initialize the strbuf.
Thanks to Johannes Sixt <j.sixt@viscovery.net> for the help with the
test cases.
Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some types of corruption to a pack may confuse the deflate stream
which stores an object. In Andy's reported case a 36 byte region
of the pack was overwritten, leading to what appeared to be a valid
deflate stream that was trying to produce a result larger than our
allocated output buffer could accept.
Z_BUF_ERROR is returned from inflate() if either the input buffer
needs more input bytes, or the output buffer has run out of space.
Previously we only considered the former case, as it meant we needed
to move the stream's input buffer to the next window in the pack.
We now abort the loop if inflate() returns Z_BUF_ERROR without
consuming the entire input buffer it was given, or has filled
the entire output buffer but has not yet returned Z_STREAM_END.
Either state is a clear indicator that this loop is not working
as expected, and should not continue.
This problem cannot occur with loose objects as we open the entire
loose object as a single buffer and treat Z_BUF_ERROR as an error.
Reported-by: Andy Isaacson <adi@hexapodia.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch to MiB/s when the connection is fast enough (i.e. on a LAN).
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we use -b <branch>, we may checkout something else than what the
remote's HEAD references, but we still used remote_head to supply the
new ref value to the post-checkout hook, which is wrong.
So instead of using remote_head to find the value to be passed to the
post-checkout hook, we have to use our_head_points_at, which is always
correctly setup, even if -b is not used.
This also fixes a segfault when "clone -b <branch>" is used with a
remote repo that doesn't have a valid HEAD, as in such a case
remote_head is NULL, but we still tried to access it.
Reported-by: Devin Cofer <ranguvar@archlinux.us>
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All programs, in particular also the stand-alone programs (non-builtins)
must call git_extract_argv0_path(argv[0]) in order to help builds that
derive the installation prefix at runtime, such as the MinGW build.
Without this call, the program segfaults (or raises an assertion
failure).
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Tested-by: Michael Wookey <michaelwookey@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unless one already knew, it was not obvious what sort of shorthand
"git check-ref-format --branch" expands. Explain it.
The --branch argument is not optional.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In all parts of git, .gitignore and other exclude files
impact only how we treat untracked files; they should have
no effect on files listed in the index.
This behavior was originally implemented very early on in
9ff768e, but only for --exclude-from. Later, commit 63d285c
accidentally caused us to trigger the behavior for
--exclude-per-directory.
This patch totally ignores excludes for files found in the
index. This means we are reversing the original intent of
9ff768e, while at the same time fixing the accidental
behavior of 63d285c. This is a good thing, though, as the
way that 9ff768e behaved does not really make sense with the
way exclusions are used in modern git.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make "git add -p" to not skip files that are in index even if they are
excluded (by .gitignore etc.). This fixes the contradictory behavior
that "git status" and "git commit -a" listed such files as modified, but
"git add -p FILENAME" ignored them.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder