When invalidating unmerged entries in the index, we used to set
their ce_mode to 0 to note the fact that they do not matter
anymore which also made sure that later unpack_trees() call
would not reuse them. Instead just remove them from the index.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I expected git grep --name-only to give me only the file names,
much as git diff --name-only only generates filenames. Alas the
option is -l, which matches common external greps but doesn't match
other parts of the git UI.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Solaris regex library doesn't like having the '$' anchor
inside capture parentheses. It rejects the match, causing
t4018 to fail.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fake-editor shell script invoked /bin/sh; normally this
is fine, unless the /bin/sh doesn't meet our compatibility
requirements, as is the case with Solaris. Specifically, the
$() syntax used by fake-editor is not understood.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These functions get called by other code, including parsing
config options from the command line. In that case,
config_file_name is NULL, leading to an ugly message or even
a segfault on some implementations of printf.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-clean simply ignored errors if removing a file or directory failed. This
patch makes it raise a warning and the exit code also greater than zero if
there are remaining files.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/setup:
builtin-mv: minimum fix to avoid losing files
git-add: adjust to the get_pathspec() changes.
Make blame accept absolute paths
setup: sanitize absolute and funny paths in get_pathspec()
* maint:
Clarified the meaning of git-add -u in the documentation
git-clone.sh: properly configure remote even if remote's head is dangling
Documentation/git-stash: document options for git stash list
send-email: squelch warning due to comparing undefined $_ to ""
The git-add documentation did not state clearly that the -u switch
updates only the tracked files that are in the current directory and
its subdirectories.
Signed-off-by: Pekka Kaitaniemi <kaitanie@cc.helsinki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cloning a remote repository which's HEAD refers to a nonexistent
ref, git-clone cloned all existing refs, but failed to write the
configuration for 'remote'. Now it detects the dangling remote HEAD,
refuses to checkout any local branch since HEAD refers to nowhere, but
properly writes the configuration for 'remote', so that subsequent
'git fetch's don't fail.
The problem was reported by Daniel Jacobowitz through
http://bugs.debian.org/466581
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will make it a little less posix-dependent, and more efficient.
Included is also a minor doc improvement.
Signed-off-by: David Kågedal <davidk@lysator.liu.se>
Acked-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The check to see if initial_reply_to is defined was also comparing $_ to
"" for a reason I cannot ascertain (looking at the commit which made the
change didn't provide enlightenment), but if $_ is undefined, perl
generates a warning.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Rename git-core rpm to just git and rename the meta-pacakge to git-all.
push: document the status output
Documentation/push: clarify matching refspec behavior
push: indicate partialness of error message
In my use cases, "cvs status" sometimes reordered the passed filenames,
which often led to a misdetection of a dirty state (when it was in
reality a clean state).
I finally tracked it down to two filenames having the same basename.
So no longer trust the order of the results blindly, but actually check
the file name.
Since "cvs status" only returns the basename (and the complete path on the
server which is useless for our purposes), run "cvs status" several times
with lists consisting of files with unique (chomped) basenames.
Be a bit clever about new files: these are reported as "no file <blabla>",
so in order to discern it from existing files, prepend "no file " to the
basename.
In other words, one call to "cvs status" will not ask for two files
"blabla" (which does not yet exist) and "no file blabla" (which exists).
This patch makes cvsexportcommit slightly slower, when the list of changed
files has non-unique basenames, but at least it is accurate now.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes my favorite annoyance with the git rpm packaging: don't pull
in tla when I say yum install git! You wouldn't expect yum install gcc
to pull in gcc-gfortran, right?
With this change, and blanket 'yum update' will automatically pull in the
new 'git' package and push out the old 'git-core', and if the old 'git'
package was installed 'git-all' will be pulled in instead. A couple of
things do break though: 'yum update git-core', because yum behaves
differently when given a specific package name - it doesn't follow obsoletes.
Instead, 'yum install git' will pull in the new git rpm, which will then
push out the old 'git-core'. Similarly, to get the newest version of
the meta package, 'yum install git-all' will install git-all, which then
pushes out the old 'git' meta package.
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --rebase option was documented in the wrong place (under MERGE
STRATEGIES instead of OPTIONS). Noted the branch.<name>.rebase
option.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
URLs generated by href(..., -replay=>1) (which includes 'next page'
links and alternate view links) didn't set project info correctly
when current page URL is in pathinfo form.
This resulted in broken links such like:
http://www.example.com/w/ARRAY(0x85a5318)?a=shortlog;pg=1
if the 'pathinfo' feature was used, or
http://www.example.com/w/?a=shortlog;pg=1
if it wasn't, instead of correct:
http://www.example.com/w/project.git?a=shortlog;pg=1
This was caused by the fact that href() always replays params in the
arrayref form, were they multivalued or singlevalued, and the code
dealing with 'pathinfo' feature couldn't deal with $params{'project'}
being arrayref.
Setting $params{'project'} is moved before replaying params; this
ensures that 'project' parameter is processed correctly.
Noticed-by: Peter Oberndorfer <kumbayo84@arcor.de>
Noticed-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output was meant to be a balance of self-explanatory and
terse. In case we have erred too far on the terse side, it
doesn't hurt to explain in more detail what each line means.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous text was correct, but it was easy to miss the
fact that we are talking about "matching" refs. That is, the
text can be parsed as "we push the union of the sets
of remote and local heads" and not "we push the intersection
of the sets of remote and local heads". (The former actually
doesn't make sense if you think about it, since we don't
even _have_ some of those heads). A careful reading would
reveal the correct meaning, but it makes sense to be as
explicit as possible in documentation.
We also explicitly use and introduce the term "matching";
this is a term discussed on the list, and it seems useful
to for users to be able to refer to this behavior by name.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing message indicates that an error occured during
push, but it is unclear whether _any_ refs were actually
pushed (even though the status table above shows which were
pushed successfully and which were not, the message "failed
to push" implies a total failure). By indicating that "some
refs" failed, we hopefully indicate to the user that the
table above contains the details.
We could also put in an explicit "see above for details"
message, but it seemed to clutter the output quite a bit
(both on a line of its own, or at the end of the error line,
which inevitably wraps).
This could also be made more fancy if the transport
mechanism passed back more details on how many refs
succeeded and failed:
error: failed to push %d out of %d refs to '%s'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using 'git rev-parse --git-dir' makes the code shorter and more future-
proof.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mk/maint-parse-careful:
peel_onion: handle NULL
check return value from parse_commit() in various functions
parse_commit: don't fail, if object is NULL
revision.c: handle tag->tagged == NULL
reachable.c::process_tree/blob: check for NULL
process_tag: handle tag->tagged == NULL
check results of parse_commit in merge_bases
list-objects.c::process_tree/blob: check for NULL
reachable.c::add_one_tree: handle NULL from lookup_tree
mark_blob/tree_uninteresting: check for NULL
get_sha1_oneline: check return value of parse_object
read_object_with_reference: don't read beyond the buffer
Some codepaths (eg. builtin-rev-parse -> get_merge_bases -> parse_commit)
can pass NULL.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As these functions are directly called with the result
from lookup_tree/blob, they must handle NULL.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As these functions are directly called with the result
from lookup_tree/blob, they must handle NULL.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As these functions are directly called with the result
from lookup_tree/blob, they must handle NULL.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A failure in prepare_revision_walk can be caused by
a not parseable object.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano