Code clean-up.
* ab/designated-initializers-more:
builtin/remote.c: add and use SHOW_INFO_INIT
builtin/remote.c: add and use a REF_STATES_INIT
urlmatch.[ch]: add and use URLMATCH_CONFIG_INIT
builtin/blame.c: refactor commit_info_init() to COMMIT_INFO_INIT macro
daemon.c: refactor hostinfo_init() to HOSTINFO_INIT macro
In the preceding commit we introduced REF_STATES_INIT, but did not
change the "struct show_info" to have a corresponding
initializer. Let's do that, and make it use "REF_STATES_INIT" and
"STRING_LIST_INIT_DUP", doing that requires changing "list" and
"states" away from being pointers.
The resulting end-state is simpler since we omit the local "info_list"
and "states" variables in show() as well as the memset().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a new REF_STATES_INIT designated initializer instead of assigning
to the "strdup_strings" member of the previously memzero()'d version
of this struct.
The pattern of assigning to "strdup_strings" dates back to
211c89682e (Make git-remote a builtin, 2008-02-29) (when it was
"strdup_paths"), i.e. long before we used anything like our current
established *_INIT patterns consistently.
Then in e61e0cc6b7 (builtin-remote: teach show to display remote
HEAD, 2009-02-25) and e5dcbfd9ab (builtin-remote: new show output
style for push refspecs, 2009-02-25) we added some more of these.
As it turns out we only initialized this struct three times, all the
other uses were of pointers to those initialized structs. So let's
initialize it in those three places, skip the memset(), and pass those
structs down appropriately.
This would be a behavior change if we had codepaths that relied say on
implicitly having had "new_refs" initialized to STRING_LIST_INIT_NODUP
with the memset(), but only set the "strdup_strings" on some other
struct, but then called string_list_append() on "new_refs". There
isn't any such codepath, all of the late assignments to
"strdup_strings" assigned to those structs that we'd use for those
codepaths.
So just initializing them all up-front makes for easier to understand
code, i.e. in the pre-image it looked as though we had that tricky
edge case, but we didn't.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We ignore them silently, but it actually makes sense to warn the users
that their config setting has no effect.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plug or annotate remaining leaks that trigger while running the
very basic set of tests.
* ah/plugleaks:
transport: also free remote_refs in transport_disconnect()
parse-options: don't leak alias help messages
parse-options: convert bitfield values to use binary shift
init-db: silence template_dir leak when converting to absolute path
init: remove git_init_db_config() while fixing leaks
worktree: fix leak in dwim_branch()
clone: free or UNLEAK further pointers when finished
reset: free instead of leaking unneeded ref
symbolic-ref: don't leak shortened refname in check_symref()
transport_get_remote_refs() can populate the transport struct's
remote_refs. transport_disconnect() is already responsible for most of
transport's cleanup - therefore we also take care of freeing remote_refs
there.
There are 2 locations where transport_disconnect() is called before
we're done using the returned remote_refs. This patch changes those
callsites to only call transport_disconnect() after the returned refs
are no longer being used - which is necessary to safely be able to
free remote_refs during transport_disconnect().
This commit fixes the following leak which was found while running
t0000, but is expected to also fix the same pattern of leak in all
locations that use transport_get_remote_refs():
Direct leak of 165 byte(s) in 1 object(s) allocated from:
#0 0x49a6b2 in calloc /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:154:3
#1 0x9a72f2 in xcalloc /home/ahunt/oss-fuzz/git/wrapper.c:140:8
#2 0x8ce203 in alloc_ref_with_prefix /home/ahunt/oss-fuzz/git/remote.c:867:20
#3 0x8ce1a2 in alloc_ref /home/ahunt/oss-fuzz/git/remote.c:875:9
#4 0x72f63e in process_ref_v2 /home/ahunt/oss-fuzz/git/connect.c:426:8
#5 0x72f21a in get_remote_refs /home/ahunt/oss-fuzz/git/connect.c:525:8
#6 0x979ab7 in handshake /home/ahunt/oss-fuzz/git/transport.c:305:4
#7 0x97872d in get_refs_via_connect /home/ahunt/oss-fuzz/git/transport.c:339:9
#8 0x9774b5 in transport_get_remote_refs /home/ahunt/oss-fuzz/git/transport.c:1388:4
#9 0x51cf80 in cmd_clone /home/ahunt/oss-fuzz/git/builtin/clone.c:1271:9
#10 0x4cd60d in run_builtin /home/ahunt/oss-fuzz/git/git.c:453:11
#11 0x4cb2da in handle_builtin /home/ahunt/oss-fuzz/git/git.c:704:3
#12 0x4ccc37 in run_argv /home/ahunt/oss-fuzz/git/git.c:771:4
#13 0x4cac29 in cmd_main /home/ahunt/oss-fuzz/git/git.c:902:19
#14 0x69c45e in main /home/ahunt/oss-fuzz/git/common-main.c:52:11
#15 0x7f6a459d5349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a remote is renamed don't change the canonical "*.pushRemote"
form to "*.pushremote". Fixes and tests for a minor bug in
923d4a5ca4 (remote rename/remove: handle branch.<name>.pushRemote
config values, 2020-01-27). See the preceding commit for why this does
& doesn't matter.
While we're at it let's also test that we handle the "*.pushDefault"
key correctly. The code to handle that was added in
b3fd6cbf29 (remote rename/remove: gently handle remote.pushDefault
config, 2020-02-01) and does the right thing, but nothing tested that
we wrote out the canonical camel-cased form.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change "git remote add" so that it adds a *.tagOpt key, and not the
lower-cased *.tagopt on "git remote add --no-tags", just as "git clone
--no-tags" would do.
This doesn't matter for anything that reads the config. It's just
prettier if we write config keys in their documented camelCase form to
user-readable config files.
When I added support for "clone -no-tags" in 0dab2468ee (clone: add a
--no-tags option to clone without tags, 2017-04-26) I made it use
the *.tagOpt form, but the older "git remote add" added in
111fb85865 (remote add: add a --[no-]tags option, 2010-04-20) has
been using *.tagopt all this time.
It's easy enough to add a test for this, so let's do that. We can't
use "git config -l" there, because it'll normalize the keys to their
lower-cased form. Let's add the test for "git clone" too for good
measure, not just to the "git remote" codepath we're fixing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will extend the flexibility of the config API. Before doing so, let's
take an existing 'int multi_replace' parameter and replace it with a new
'unsigned flags' parameter that can take multiple options as a bit field.
Update all callers that specified multi_replace to now specify the
CONFIG_FLAGS_MULTI_REPLACE flag. To add more clarity, extend the
documentation of git_config_set_multivar_in_file() including a clear
labeling of its arguments. Other config API methods in config.h require
only a change of the final parameter from 'int' to 'unsigned'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Exit codes from "git remote add" etc. were not usable by scripted
callers.
* ab/git-remote-exit-code:
remote: add meaningful exit code on missing/existing
"git clone" learned clone.defaultremotename configuration variable
to customize what nickname to use to call the remote the repository
was cloned from.
* sb/clone-origin:
clone: allow configurable default for `-o`/`--origin`
clone: read new remote name from remote_name instead of option_origin
clone: validate --origin option before use
refs: consolidate remote name validation
remote: add tests for add and rename with invalid names
clone: use more conventional config/option layering
clone: add tests for --template and some disallowed option pairs
Change the exit code for the likes of "git remote add/rename" to exit
with 2 if the remote in question doesn't exist, and 3 if it
does. Before we'd just die() and exit with the general 128 exit code.
This changes the output message from e.g.:
fatal: remote origin already exists.
To:
error: remote origin already exists.
Which I believe is a feature, since we generally use "fatal" for the
generic errors, and "error" for the more specific ones with a custom
exit code, but this part of the change may break code that already
relies on stderr parsing (not that we ever supported that...).
The motivation for this is a discussion around some code in GitLab's
gitaly which wanted to check this, and had to parse stderr to do so:
https://gitlab.com/gitlab-org/gitaly/-/merge_requests/2695
It's worth noting as an aside that a method of checking this that
doesn't rely on that is to check with "git config" whether the value
in question does or doesn't exist. That introduces a TOCTOU race
condition, but on the other hand this code (e.g. "git remote add")
already has a TOCTOU race.
We go through the config.lock for the actual setting of the config,
but the pseudocode logic is:
read_config();
check_config_and_arg_sanity();
save_config();
So e.g. if a sleep() is added right after the remote_is_configured()
check in add() we'll clobber remote.NAME.url, and add another (usually
duplicate) remote.NAME.fetch entry (and other values, depending on
invocation).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for a future patch, extract from remote.c a function that
validates possible remote names so that its rules can be used
consistently in other places.
Helped-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Sean Barag <sean@barag.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git remote set-head" that failed still said something that hints
the operation went through, which was misleading.
* cs/don-t-pretend-a-failed-remote-set-head-succeeded:
remote: don't show success message when set-head fails
Suppress the message 'origin/HEAD set to master' in case of an error.
$ git remote set-head origin -a
error: Not a valid ref: refs/remotes/origin/master
origin/HEAD set to master
Signed-off-by: Christian Schlack <christian@backhub.co>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A couple of functions that used struct refspec_item did not zero out the
structure memory. This can result in unexpected behavior, especially if
additional parameters are ever added to refspec_item in the future. Use
memset to ensure that unset structure members are zero.
It may make sense to convert most of these uses of struct refspec_item
to use either struct initializers or refspec_item_init_or_die. However,
other similar code uses memset. Converting all of these uses has been
left as a future exercise.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "argc" and "argv" names made sense when the struct was argv_array,
but now they're just confusing. Let's rename them to "nr" (which we use
for counts elsewhere) and "v" (which is rather terse, but reads well
when combined with typical variable names like "args.v").
Note that we have to update all of the callers immediately. Playing
tricks with the preprocessor is hard here, because we wouldn't want to
rewrite unrelated tokens.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts all of the files in builtin/ to keep the diff to a
manageable size.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
and then selectively staging files with "git add builtin/". We'll deal
with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This requires updating #include lines across the code-base, but that's
all fairly mechanical, and was done with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe 's/argv-array.h/strvec.h/'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the codebase, there are many options which use OPTION_CALLBACK in a
plain ol' struct definition. However, we have the OPT_CALLBACK and
OPT_CALLBACK_F macros which are meant to abstract these plain struct
definitions away. These macros are useful as they semantically signal to
developers that these are just normal callback option with nothing fancy
happening.
Replace plain struct definitions of OPTION_CALLBACK with OPT_CALLBACK or
OPT_CALLBACK_F where applicable. The heavy lifting was done using the
following (disgusting) shell script:
#!/bin/sh
do_replacement () {
tr '\n' '\r' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\s*0,\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK(\1,\2,\3,\4,\5,\6)/g' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK_F(\1,\2,\3,\4,\5,\6,\7)/g' |
tr '\r' '\n'
}
for f in $(git ls-files \*.c)
do
do_replacement <"$f" >"$f.tmp"
mv "$f.tmp" "$f"
done
The result was manually inspected and then reformatted to match the
style of the surrounding code. Finally, using
`git grep OPTION_CALLBACK \*.c`, leftover results which were not handled
by the script were manually transformed.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When renaming a remote with
git remote rename X Y
git remote remove X
Git already renames or removes any branch.<name>.remote and
branch.<name>.pushRemote configurations if their value is X.
However remote.pushDefault needs a more gentle approach, as this may be
set in a non-repo configuration file. In such a case only a warning is
printed, such as:
warning: The global configuration remote.pushDefault in:
$HOME/.gitconfig:35
now names the non-existent remote origin
It is changed to remote.pushDefault = Y or removed when set in a repo
configuration though.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When renaming or removing a remote with
git remote rename X Y
git remote remove X
Git already renames/removes any config values from
branch.<name>.remote = X
to
branch.<name>.remote = Y
As branch.<name>.pushRemote also names a remote, it now also renames
or removes these config values from
branch.<name>.pushRemote = X
to
branch.<name>.pushRemote = Y
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some minor clean-ups in function `config_read_branches`:
* remove hardcoded length in `key += 7`
* call `xmemdupz` only once
* use a switch to handle the configuration type and add a `BUG()`
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 46af44b07d (pull --rebase=<type>: allow single-letter abbreviations
for the type, 2018-08-04) landed in Git, it had the side effect that
not only 'pull --rebase=<type>' accepted the single-letter abbreviations
but also the 'pull.rebase' and 'branch.<name>.rebase' configurations.
However, 'git remote rename' did not honor these single-letter
abbreviations when reading the 'branch.*.rebase' configurations.
We now document the single-letter abbreviations and both code places
share a common function to parse the values of 'git pull --rebase=*',
'pull.rebase', and 'branches.*.rebase'.
The only functional change is the handling of the `branch_info::rebase`
value. Before it was an unsigned enum, thus the truth value could be
checked with `branch_info::rebase != 0`. But `enum rebase_type` is
signed, thus the truth value must now be checked with
`branch_info::rebase >= REBASE_TRUE`
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
read_ref_full() wraps refs_read_ref_full(), which in turn wraps
refs_resolve_ref_unsafe(), which handles a NULL oid pointer of callers
not interested in the resolved object ID. Make use of that feature to
document that mv() is such a caller.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function already takes a "key" parameter which uniquely identifies
the config key that we need to remove. There's no need for it to look at
the "remote" parameter at all. Let's drop it in the name of simplicity.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update error messages given by "git remote" and make them consistent.
* ms/remote-error-message-update:
builtin/remote: quote remote name on error to display empty name
spatch transformation to replace boolean uses of !hashcmp() to
newly introduced oideq() is added, and applied, to regain
performance lost due to support of multiple hash algorithms.
* jk/cocci:
show_dirstat: simplify same-content check
read-cache: use oideq() in ce_compare functions
convert hashmap comparison functions to oideq()
convert "hashcmp() != 0" to "!hasheq()"
convert "oidcmp() != 0" to "!oideq()"
convert "hashcmp() == 0" to hasheq()
convert "oidcmp() == 0" to oideq()
introduce hasheq() and oideq()
coccinelle: use <...> for function exclusion
The code for computing history reachability has been shuffled,
obtained a bunch of new tests to cover them, and then being
improved.
* ds/reachable:
commit-reach: correct accidental #include of C file
commit-reach: use can_all_from_reach
commit-reach: make can_all_from_reach... linear
commit-reach: replace ref_newer logic
test-reach: test commit_contains
test-reach: test can_all_from_reach_with_flags
test-reach: test reduce_heads
test-reach: test get_merge_bases_many
test-reach: test is_descendant_of
test-reach: test in_merge_bases
test-reach: create new test tool for ref_newer
commit-reach: move can_all_from_reach_with_flags
upload-pack: generalize commit date cutoff
upload-pack: refactor ok_to_give_up()
upload-pack: make reachable() more generic
commit-reach: move commit_contains from ref-filter
commit-reach: move ref_newer from remote.c
commit.h: remove method declarations
commit-reach: move walk methods from commit.c
When adding new remote name with empty string, git will print the
following error message,
fatal: '' is not a valid remote name\n
But when removing remote name with empty string as input, git shows the
empty string without quote,
fatal: No such remote: \n
To make these error messages consistent, quote the name of the remote
that we tried and failed to find.
Signed-off-by: Shulhan <m.shulhan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the more restrictive oideq() should, in the long run,
give the compiler more opportunities to optimize these
callsites. For now, this conversion should be a complete
noop with respect to the generated code.
The result is also perhaps a little more readable, as it
avoids the "zero is equal" idiom. Since it's so prevalent in
C, I think seasoned programmers tend not to even notice it
anymore, but it can sometimes make for awkward double
negations (e.g., we can drop a few !!oidcmp() instances
here).
This patch was generated almost entirely by the included
coccinelle patch. This mechanical conversion should be
completely safe, because we check explicitly for cases where
oidcmp() is compared to 0, which is what oideq() is doing
under the hood. Note that we don't have to catch "!oidcmp()"
separately; coccinelle's standard isomorphisms make sure the
two are treated equivalently.
I say "almost" because I did hand-edit the coccinelle output
to fix up a few style violations (it mostly keeps the
original formatting, but sometimes unwraps long lines).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cmd -h" updates.
* rs/opt-updates:
parseopt: group literal string alternatives in argument help
remote: improve argument help for add --mirror
checkout-index: improve argument help for --stage
Group the possible values using a pair of parentheses and don't mark
them for translation, as they are literal strings that have to be used
as-is in any locale.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch to the _DUP variant of string_list for remote_branches to allow
string_list_clear() to release the allocated memory at the end, and
actually call that function. Free the util pointer as well; it is
allocated in read_remote_branches().
NB: This string_list is empty until read_remote_branches() is called
via for_each_ref(), so there is no need to clean it up when returning
before that point.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are several commit walks in the codebase. Group them together into
a new commit-reach.c file and corresponding header. After we group these
walks into one place, we can reduce duplicate logic by calling
equivalent methods.
The ref_newer() method is used by 'git push -f' to check if a force-push
is necessary. By making the method public, we make it possible to test
the method directly without setting up an envieronment where a 'git
push' call makes sense.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
"git fetch $there $refspec" that talks over protocol v2 can take
advantage of server-side ref filtering; the code has been extended
so that this mechanism triggers also when fetching with configured
refspec.
* bw/ref-prefix-for-configured-refspec: (38 commits)
fetch: generate ref-prefixes when using a configured refspec
refspec: consolidate ref-prefix generation logic
submodule: convert push_unpushed_submodules to take a struct refspec
remote: convert check_push_refs to take a struct refspec
remote: convert match_push_refs to take a struct refspec
http-push: store refspecs in a struct refspec
transport: remove transport_verify_remote_names
send-pack: store refspecs in a struct refspec
transport: convert transport_push to take a struct refspec
push: convert to use struct refspec
push: check for errors earlier
remote: convert match_explicit_refs to take a struct refspec
remote: convert get_ref_match to take a struct refspec
remote: convert query_refspecs to take a struct refspec
remote: convert apply_refspecs to take a struct refspec
remote: convert get_stale_heads to take a struct refspec
fetch: convert prune_refs to take a struct refspec
fetch: convert get_ref_map to take a struct refspec
fetch: convert do_fetch to take a struct refspec
refspec: remove the deprecated functions
...
"git rebase" learned "--rebase-merges" to transplant the whole
topology of commit graph elsewhere.
* js/rebase-recreate-merge:
rebase -i --rebase-merges: add a section to the man page
rebase -i: introduce --rebase-merges=[no-]rebase-cousins
pull: accept --rebase=merges to recreate the branch topology
rebase --rebase-merges: avoid "empty merges"
sequencer: handle post-rewrite for merge commands
sequencer: make refs generated by the `label` command worktree-local
rebase --rebase-merges: add test for --keep-empty
rebase: introduce the --rebase-merges option
rebase-helper --make-script: introduce a flag to rebase merges
sequencer: fast-forward `merge` commands, if possible
sequencer: introduce the `merge` command
sequencer: introduce new commands to reset the revision
git-rebase--interactive: clarify arguments
sequencer: offer helpful advice when a command was rescheduled
sequencer: refactor how original todo list lines are accessed
sequencer: make rearrange_squash() a bit more obvious
sequencer: avoid using errno clobbered by rollback_lock_file()
Convert 'match_push_refs()' to take a 'struct refspec' as a parameter
instead of an array of 'const char *'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert 'get_stale_heads()' to take a 'struct refspec' as a parameter instead
of a list of 'struct refspec_item'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the set of fetch refspecs stored in 'struct remote' to use
'struct refspec'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the set of push refspecs stored in 'struct remote' to use
'struct refspec'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for introducing an abstraction around a collection of
refspecs (much like how a 'struct pathspec' is a collection of 'struct
pathspec_item's) rename the existing 'struct refspec' to 'struct
refspec_item'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for performing a refactor on refspec related code, move
the refspec parsing logic into its own file.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should make these functions easier to find and cache.h less
overwhelming to read.
In particular, this moves:
- read_object_file
- oid_object_info
- write_object_file
As a result, most of the codebase needs to #include object-store.h.
In this patch the #include is only added to files that would fail to
compile otherwise. It would be better to #include wherever
identifiers from the header are used. That can happen later
when we have better tooling for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The beginning of the next-gen transfer protocol.
* bw/protocol-v2: (35 commits)
remote-curl: don't request v2 when pushing
remote-curl: implement stateless-connect command
http: eliminate "# service" line when using protocol v2
http: don't always add Git-Protocol header
http: allow providing extra headers for http requests
remote-curl: store the protocol version the server responded with
remote-curl: create copy of the service name
pkt-line: add packet_buf_write_len function
transport-helper: introduce stateless-connect
transport-helper: refactor process_connect_service
transport-helper: remove name parameter
connect: don't request v2 when pushing
connect: refactor git_connect to only get the protocol version once
fetch-pack: support shallow requests
fetch-pack: perform a fetch using v2
upload-pack: introduce fetch server command
push: pass ref prefixes when pushing
fetch: pass ref prefixes when fetching
ls-remote: pass ref prefixes when requesting a remote's refs
transport: convert transport_get_remote_refs to take a list of ref prefixes
...
Similar to the `preserve` mode simply passing the `--preserve-merges`
option to the `rebase` command, the `merges` mode simply passes the
`--rebase-merges` option.
This will allow users to conveniently rebase non-trivial commit
topologies when pulling new commits, without flattening them.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach transport_get_remote_refs() to accept a list of ref prefixes,
which will be sent to the server for use in filtering when using
protocol v2. (This list will be ignored when not using protocol v2.)
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach parse-options API an option to help the completion script,
and make use of the mechanism in command line completion.
* nd/parseopt-completion: (45 commits)
completion: more subcommands in _git_notes()
completion: complete --{reuse,reedit}-message= for all notes subcmds
completion: simplify _git_notes
completion: don't set PARSE_OPT_NOCOMPLETE on --rerere-autoupdate
completion: use __gitcomp_builtin in _git_worktree
completion: use __gitcomp_builtin in _git_tag
completion: use __gitcomp_builtin in _git_status
completion: use __gitcomp_builtin in _git_show_branch
completion: use __gitcomp_builtin in _git_rm
completion: use __gitcomp_builtin in _git_revert
completion: use __gitcomp_builtin in _git_reset
completion: use __gitcomp_builtin in _git_replace
remote: force completing --mirror= instead of --mirror
completion: use __gitcomp_builtin in _git_remote
completion: use __gitcomp_builtin in _git_push
completion: use __gitcomp_builtin in _git_pull
completion: use __gitcomp_builtin in _git_notes
completion: use __gitcomp_builtin in _git_name_rev
completion: use __gitcomp_builtin in _git_mv
completion: use __gitcomp_builtin in _git_merge_base
...
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git remote --mirror" is a special case. Technically it is possible to
specify --mirror without any argument. But we will get a "dangerous,
deprecated!" warning in that case.
This new parse-opt flag allows --git-completion-helper to always
complete --mirror=, ignoring the dangerous use case.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up in refs API implementation.
* mh/tidy-ref-update-flags:
refs: update some more docs to use "oid" rather than "sha1"
write_packed_entry(): take `object_id` arguments
refs: rename constant `REF_ISPRUNING` to `REF_IS_PRUNING`
refs: rename constant `REF_NODEREF` to `REF_NO_DEREF`
refs: tidy up and adjust visibility of the `ref_update` flags
ref_transaction_add_update(): remove a check
ref_transaction_update(): die on disallowed flags
prune_ref(): call `ref_transaction_add_update()` directly
files_transaction_prepare(): don't leak flags to packed transaction
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (25 commits)
refs/files-backend: convert static functions to object_id
refs: convert read_raw_ref backends to struct object_id
refs: convert peel_object to struct object_id
refs: convert resolve_ref_unsafe to struct object_id
worktree: convert struct worktree to object_id
refs: convert resolve_gitlink_ref to struct object_id
Convert remaining callers of resolve_gitlink_ref to object_id
sha1_file: convert index_path and index_fd to struct object_id
refs: convert reflog_expire parameter to struct object_id
refs: convert read_ref_at to struct object_id
refs: convert peel_ref to struct object_id
builtin/pack-objects: convert to struct object_id
pack-bitmap: convert traverse_bitmap_commit_list to object_id
refs: convert dwim_log to struct object_id
builtin/reflog: convert remaining unsigned char uses to object_id
refs: convert dwim_ref and expand_ref to struct object_id
refs: convert read_ref and read_ref_full to object_id
refs: convert resolve_refdup and refs_resolve_refdup to struct object_id
Convert check_connected to use struct object_id
refs: update ref transactions to use struct object_id
...
Even after working with this code for years, I still see this constant
name as "ref node ref". Rename it to make it's meaning clearer.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's possible for resolve_ref_unsafe() to return NULL with a
REF_ISSYMREF flag if a symref points to a broken ref. In
this case, the read_remote_branches() function will segfault
passing the name to xstrdup().
This is hard to trigger in practice, since this function is
used as a callback to for_each_ref(), which will skip broken
refs in the first place (so it would have to be broken
racily, or for us to see a transient filesystem error).
If we see such a racy broken outcome let's treat it as "not
a symref". This is exactly the same thing that would happen
in the non-racy case (our function would not be called at
all, as for_each_ref would skip the broken symref).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All but two of the call sites already have parameters using the hash
parameter of struct object_id, so convert them to take a pointer to the
struct directly. Also convert refs_read_refs_full, the underlying
implementation.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to get rid of some write-only variables, among them seven
SHA1 buffers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* ma/parse-maybe-bool:
parse_decoration_style: drop unused argument `var`
treewide: deprecate git_config_maybe_bool, use git_parse_maybe_bool
config: make git_{config,parse}_maybe_bool equivalent
config: introduce git_parse_maybe_bool_text
t5334: document that git push --signed=1 does not work
Doc/git-{push,send-pack}: correct --sign= to --signed=
The only difference between these is that the former takes an argument
`name` which it ignores completely. Still, the callers are quite careful
to provide reasonable values for it.
Once in-flight topics have landed, we should be able to remove
git_config_maybe_bool. In the meantime, document it as deprecated in the
technical documentation. While at it, document git_parse_maybe_bool.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The implementation of "ref" API around the "packed refs" have been
cleaned up, in preparation for further changes.
* mh/packed-ref-store-prep: (25 commits)
cache_ref_iterator_begin(): avoid priming unneeded directories
ref-filter: limit traversal to prefix
create_ref_entry(): remove `check_name` option
refs_ref_iterator_begin(): handle `GIT_REF_PARANOIA`
read_packed_refs(): report unexpected fopen() failures
read_packed_refs(): do more of the work of reading packed refs
get_packed_ref_cache(): assume "packed-refs" won't change while locked
should_pack_ref(): new function, extracted from `files_pack_refs()`
ref_update_reject_duplicates(): add a sanity check
ref_update_reject_duplicates(): use `size_t` rather than `int`
ref_update_reject_duplicates(): expose function to whole refs module
ref_transaction_prepare(): new optional step for reference updates
ref_transaction_commit(): check for valid `transaction->state`
files_transaction_cleanup(): new helper function
files_ref_store: put the packed files lock directly in this struct
files-backend: move `lock` member to `files_ref_store`
lockfile: add a new method, is_lock_file_locked()
ref_store: take a `msg` parameter when deleting references
refs: use `size_t` indexes when iterating over ref transaction updates
refs_ref_iterator_begin(): don't check prefixes redundantly
...
Change all the "TRANSLATORS: [...]" comments in the C code to use the
regular Git coding style, and amend the style guide so that the
example there uses that style.
This custom style was necessary back in 2010 when the gettext support
was initially added, and was subsequently documented in commit
cbcfd4e3ea ("i18n: mention "TRANSLATORS:" marker in
Documentation/CodingGuidelines", 2014-04-18).
GNU xgettext hasn't had the parsing limitation that necessitated this
exception for almost 3 years. Since its 0.19 release on 2014-06-02
it's been able to recognize TRANSLATOR comments in the standard Git
comment syntax[1].
Usually we'd like to keep compatibility with software that's that
young, but in this case literally the only person who needs to be
using a gettext newer than 3 years old is Jiang Xin (the only person
who runs & commits "make pot" results), so I think in this case we can
make an exception.
This xgettext parsing feature was added after a thread on the Git
mailing list[2] which continued on the bug-gettext[3] list, but we
never subsequently changed our style & styleguide, do so.
There are already longstanding changes in git that use the standard
comment style & have their TRANSLATORS comments extracted properly
without getting the literal "*"'s mixed up in the text, as would
happen before xgettext 0.19.
Commit 7ff2683253 ("builtin-am: implement -i/--interactive",
2015-08-04) added one such comment, which in commit df0617bfa7 ("l10n:
git.pot: v2.6.0 round 1 (123 new, 41 removed)", 2015-09-05) got picked
up in the po/git.pot file with the right format, showing that Jiang
already runs a modern xgettext.
The xgettext parser does not handle the sort of non-standard comment
style that I'm amending here in sequencer.c, but that isn't standard
Git comment syntax anyway. With this change to sequencer.c & "make
pot" the comment in the pot file is now correct:
#. TRANSLATORS: %s will be "revert", "cherry-pick" or
-#. * "rebase -i".
+#. "rebase -i".
1. http://git.savannah.gnu.org/cgit/gettext.git/commit/?id=10af7fe6bd
2. <2ce9ec406501d112e032c8208417f8100bed04c6.1397712142.git.worldhello.net@gmail.com>
(https://public-inbox.org/git/2ce9ec406501d112e032c8208417f8100bed04c6.1397712142.git.worldhello.net@gmail.com/)
3. https://lists.gnu.org/archive/html/bug-gettext/2014-04/msg00016.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just because the files backend can't retain reflogs for deleted
references is no reason that they shouldn't be supported by the
virtual method interface. Also, `delete_ref()` and `refs_delete_ref()`
have already gained `msg` parameters. Now let's add them to
`delete_refs()` and `refs_delete_refs()`.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git remote rm X", when a branch has remote X configured as the
value of its branch.*.remote, tried to remove branch.*.remote and
branch.*.merge and failed if either is unset.
* rl/remote-allow-missing-branch-name-merge:
remote: ignore failure to remove missing branch.<name>.merge
It is not all too unusual for a branch to use "branch.<name>.remote"
without "branch.<name>.merge". You may be using the 'push.default'
configuration set to 'current', for example, and do
$ git checkout -b side colleague/side
$ git config branch.side.remote colleague
However, "git remote rm" to remove the remote used in such a manner
fails with
"fatal: could not unset 'branch.<name>.merge'"
because it assumes that a branch that has .remote defined must also
have .merge defined. Detect the "cannot unset because it is not set
to begin with" case and ignore it.
Signed-off-by: Ross Lagerwall <rosslagerwall@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the current branch is renamed with 'git branch -m/-M' or deleted
with 'git update-ref -m<msg> -d', the event is recorded in HEAD's log
with an empty message. In preparation for adding a more meaningful
message to HEAD's log in these cases, update delete_ref() to take a
message argument and pass it along to ref_transaction_delete().
Modify all callers to pass NULL for the new message argument; no
change in behavior is intended.
Note that this is relevant for HEAD's log but not for the deleted
ref's log, which is currently deleted along with the ref. Even if it
were not, an entry for the deletion wouldn't be present in the deleted
ref's log. files_transaction_commit() writes to the log if
REF_NEEDS_COMMIT or REF_LOG_ONLY are set, but lock_ref_for_update()
doesn't set REF_NEEDS_COMMIT for the deleted ref because REF_DELETING
is set. In contrast, the update for HEAD has REF_LOG_ONLY set by
split_head_update(), resulting in the deletion being logged.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With anticipatory tweaking for remotes defined in ~/.gitconfig
(e.g. "remote.origin.prune" set to true, even though there may or
may not actually be "origin" remote defined in a particular Git
repository), "git remote rename" and other commands misinterpreted
and behaved as if such a non-existing remote actually existed.
* js/remote-rename-with-half-configured-remote:
remote rename: more carefully determine whether a remote is configured
remote rename: demonstrate a bogus "remote exists" bug
One of the really nice features of the ~/.gitconfig file is that users
can override defaults by their own preferred settings for all of their
repositories.
One such default that some users like to override is whether the
"origin" remote gets auto-pruned or not. The user would simply call
git config --global remote.origin.prune true
and from now on all "origin" remotes would be pruned automatically when
fetching into the local repository.
There is just one catch: now Git thinks that the "origin" remote is
configured, even if the repository config has no [remote "origin"]
section at all, as it does not realize that the "prune" setting was
configured globally and that there really is no "origin" remote
configured in this repository.
That is a problem e.g. when renaming a remote to a new name, when Git
may be fooled into thinking that there is already a remote of that new
name.
Let's fix this by paying more attention to *where* the remote settings
came from: if they are configured in the local repository config, we
must not overwrite them. If they were configured elsewhere, we cannot
overwrite them to begin with, as we only write the repository config.
There is only one caller of remote_is_configured() (in `git fetch`) that
may want to take remotes into account even if they were configured
outside the repository config; all other callers essentially try to
prevent the Git command from overwriting settings in the repository
config.
To accommodate that fact, the remote_is_configured() function now
requires a parameter that states whether the caller is interested in all
remotes, or only in those that were configured in the repository config.
Many thanks to Jeff King whose tireless review helped with settling for
nothing less than the current strategy.
This fixes https://github.com/git-for-windows/git/issues/888
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the semantic patch contrib/coccinelle/qsort.cocci to the code
base, replacing calls of qsort(3) with QSORT. The resulting code is
shorter and supports empty arrays with NULL pointers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The API to iterate over all the refs (i.e. for_each_ref(), etc.)
has been revamped.
* mh/ref-iterators:
for_each_reflog(): reimplement using iterators
dir_iterator: new API for iterating over a directory tree
for_each_reflog(): don't abort for bad references
do_for_each_ref(): reimplement using reference iteration
refs: introduce an iterator interface
ref_resolves_to_object(): new function
entry_resolves_to_object(): rename function from ref_resolves_to_object()
get_ref_cache(): only create an instance if there is a submodule
remote rm: handle symbolic refs correctly
delete_refs(): add a flags argument
refs: use name "prefix" consistently
do_for_each_ref(): move docstring to the header file
refs: remove unnecessary "extern" keywords
More markings of messages for i18n, with updates to various tests
to pass GETTEXT_POISON tests.
One patch from the original submission dropped due to conflicts
with jk/upload-pack-hook, which is still in flux.
* va/i18n-even-more: (38 commits)
t5541: become resilient to GETTEXT_POISON
i18n: branch: mark comment when editing branch description for translation
i18n: unmark die messages for translation
i18n: submodule: escape shell variables inside eval_gettext
i18n: submodule: join strings marked for translation
i18n: init-db: join message pieces
i18n: remote: allow translations to reorder message
i18n: remote: mark URL fallback text for translation
i18n: standardise messages
i18n: sequencer: add period to error message
i18n: merge: change command option help to lowercase
i18n: merge: mark messages for translation
i18n: notes: mark options for translation
i18n: notes: mark strings for translation
i18n: transport-helper.c: change N_() call to _()
i18n: bisect: mark strings for translation
t5523: use test_i18ngrep for negation
t4153: fix negated test_i18ngrep call
t9003: become resilient to GETTEXT_POISON
tests: unpack-trees: update to use test_i18n* functions
...
Instead of taking advantage of a struct string_list that is
allocated with all NULs happens to be STRING_LIST_INIT_NODUP kind,
initialize them explicitly as such, to document their behaviour
better.
* jk/string-list-static-init:
use string_list initializer consistently
blame,shortlog: don't make local option variables static
interpret-trailers: don't duplicate option strings
parse_opt_string_list: stop allocating new strings
In the modern world of reference backends, it is not OK to delete a
symref by unlink()ing the file directly. This must be done via the refs
API.
We do so by adding the symref to the list of references to delete along
with the non-symbolic references, then calling delete_refs() with the
new flags option set to REF_NODEREF.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will be useful for passing REF_NODEREF through.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this patch, translations couldn't place the branch name
where it was better fit in the message "and with remote <branch_name>".
Allow translations that, instead of forcing the branch name to display
right of the message.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Marks fallback text for translation that may be displayed in git remote
show output.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The second string inside _() was not being extracted for translation by
xgettext, meaning that, although the string was passed to gettext, there
was no translation available.
Mark each individual string instead of marking the result of ternary if.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two types of string_lists: those that own the
string memory, and those that don't. You can tell the
difference by the strdup_strings flag, and one should use
either STRING_LIST_INIT_DUP, or STRING_LIST_INIT_NODUP as an
initializer.
Historically, the normal all-zeros initialization has
corresponded to the NODUP case. Many sites use no
initializer at all, and that works as a shorthand for that
case. But for a reader of the code, it can be hard to
remember which is which. Let's be more explicit and actually
have each site declare which type it means to use.
This is a fairly mechanical conversion; I assumed each site
was correct as-is, and just switched them all to NODUP.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add comment drawing translator attention in order to align "Push
URL:" and "Fetch URL:" fields translation of git remote show output.
Aligning both fields makes the output more appealing and easier to
grasp.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many codepaths forget to check return value from git_config_set();
the function is made to die() to make sure we do not proceed when
setting a configuration variable failed.
* ps/config-error:
config: rename git_config_set_or_die to git_config_set
config: rename git_config_set to git_config_set_gently
compat: die when unable to set core.precomposeunicode
sequencer: die on config error when saving replay opts
init-db: die on config errors when initializing empty repo
clone: die on config error in cmd_clone
remote: die on config error when manipulating remotes
remote: die on config error when setting/adding branches
remote: die on config error when setting URL
submodule--helper: die on config error when cloning module
submodule: die on config error when linking modules
branch: die on config error when editing branch description
branch: die on config error when unsetting upstream
branch: report errors in tracking branch setup
config: introduce set_or_die wrappers
Rename git_config_set_or_die functions to git_config_set, leading
to the new default behavior of dying whenever a configuration
error occurs.
By now all callers that shall die on error have been transitioned
to the _or_die variants, thus making this patch a simple rename
of the functions.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The desired default behavior for `git_config_set` is to die
whenever an error occurs. Dying is the default for a lot of
internal functions when failures occur and is in this case the
right thing to do for most callers as otherwise we might run into
inconsistent repositories without noticing.
As some code may rely on the actual return values for
`git_config_set` we still require the ability to invoke these
functions without aborting. Rename the existing `git_config_set`
functions to `git_config_set_gently` to keep them available for
those callers.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When manipulating remotes we try to set various configuration
values without checking if the values were persisted correctly,
possibly leaving the remote in an inconsistent state.
Fix this issue by dying early and notifying the user about the
error.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we add or set new branches (e.g. by `git remote add -f` or
`git remote set-branches`) we do not check for error codes when
writing the branches to the configuration file. When persisting
the configuration failed we are left with a remote that has none
or not all of the branches that should have been set without
notifying the user.
Fix this issue by dying early on configuration error.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When invoking `git-remote --set-url` we do not check the return
value when writing the actual new URL to the configuration file,
pretending to the user that the configuration has been set while
it was in fact not persisted.
Fix this problem by dying early when setting the config fails.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both remote add and remote rename use a slightly different hand-rolled
check if the remote exits. The hand-rolled check may have some subtle
cases in which it might fail to detect when a remote already exists.
One such case was fixed in fb86e32 ("git remote: allow adding remotes
agreeing with url.<...>.insteadOf"). Another case is when a remote is
configured as follows:
[remote "foo"]
vcs = bar
If we try to run `git remote add foo bar` with the above remote
configuration, git segfaults. This change fixes it.
In addition, git remote rename $existing foo with the configuration for
foo as above silently succeeds, even though foo already exists,
modifying its configuration. With this patch it fails with "remote foo
already exists".
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When converting the git remote command to a builtin in 211c89 ("Make
git-remote a builtin"), a few calls to check if a remote exists were
converted from:
if (!exists $remote->{$name}) {
[...]
to:
remote = remote_get(argv[1]);
if (!remote)
[...]
The new check is not quite correct, because remote_get() never returns
NULL if a name is given. This leaves us with the somewhat cryptic error
message "error: Could not remove config section 'remote.test'", if we
are trying to remove a remote that does not exist, or a similar error if
we try to rename a remote.
Use the remote_is_configured() function to check whether the remote
actually exists, and die with a more sensible error message ("No such
remote: $remotename") instead if it doesn't.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The remote_is_configured() function allows checking whether a remote
exists or not. The function however only works if remote_get() wasn't
called before calling it. In addition, it only checks the configuration
for remotes, but not remotes or branches files.
Make use of the origin member of struct remote instead, which indicates
where the remote comes from. It will be set to some value if the remote
is configured in any file in the repository, but is initialized to 0 if
the remote is only created in make_remote().
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config variable branch.<branchname>.rebase is not only used by `git
pull`, but also by `git remote` when showing details about a remote.
Therefore, it needs to be taught to accept the newly-introduced
`interactive` value of said variable.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert ref_newer and its caller to use struct object_id instead of
unsigned char *.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Use struct object_id in three fields in struct ref and convert all the
necessary places that use it.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
"git remote" learned "get-url" subcommand to show the URL for a
given remote name used for fetching and pushing.
* bb/remote-get-url:
remote: add get-url subcommand
Expanding `insteadOf` is a part of ls-remote --url and there is no way
to expand `pushInsteadOf` as well. Add a get-url subcommand to be able
to query both as well as a way to get all configured urls.
Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano