When users spell "cc:" in lowercase in the fake "header" in the
trailer part, "git send-email" failed to pick up the addresses from
there. As e-mail headers field names are case insensitive, this
script should follow suit and treat "cc:" and "Cc:" the same way.
* nz/send-email-headers-are-case-insensitive:
git-send-email: treat field names as case-insensitively
"git archive" did not record uncompressed size in the header when
streaming a zip archive, which confused some implementations of
unzip.
* rs/zip-with-uncompressed-size-in-the-header:
archive-zip: write uncompressed size into header even with streaming
* rs/zip-tests:
t5003: check if unzip supports symlinks
t5000, t5003: move ZIP tests into their own script
t0024, t5000: use test_lazy_prereq for UNZIP
t0024, t5000: clear variable UNZIP, use GIT_UNZIP instead
A tar archive created by "git archive" recorded a directory in a
way that made NetBSD's implementation of "tar" sometimes unhappy.
* rs/leave-base-name-in-name-field-of-tar:
archive-tar: split long paths more carefully
When "git clone --separate-git-dir=$over_there" is interrupted, it
failed to remove the real location of the $GIT_DIR it created. This
was most visible when interrupting a submodule update.
* jl/interrupt-clone-remove-separate-git-dir:
clone: support atomic operation with --separate-git-dir
"git merge --no-edit" computed who were involved in the work done
on the side branch, even though that information is to be discarded
without getting seen in the editor.
* jc/maint-fmt-merge-msg-no-edit-lose-credit:
merge --no-edit: do not credit people involved in the side branch
"git apply" misbehaved when fixing whitespace breakages by removing
excess trailing blank lines.
* jc/apply-trailing-blank-removal:
apply.c:update_pre_post_images(): the preimage can be truncated
The behaviour visible to the end users was confusing, when they
attempt to kill a process spawned in the editor that was in turn
launched by Git with SIGINT (or SIGQUIT), as Git would catch that
signal and die. We ignore these signals now.
* pf/editor-ignore-sigint:
fix compilation with NO_PTHREADS
launch_editor: propagate signals from editor to git
run-command: do not warn about child death from terminal
launch_editor: ignore terminal signals while editor has control
launch_editor: refactor to use start/finish_command
run-command: drop silent_exec_failure arg from wait_or_whine
We have two simple and quick tests to catch common mistakes when
writing test scripts, but we did not run them by default when
running tests.
* jk/enable-test-lint-by-default:
tests: turn on test-lint by default
"git merge" started calling prepare-commit-msg hook like "git
commit" does some time ago, but forgot to pay attention to the exit
status of the hook.
* ap/merge-stop-at-prepare-commit-msg-failure:
merge: Honor prepare-commit-msg return code
* jc/submittingpatches:
SubmittingPatches: give list and maintainer addresses
SubmittingPatches: remove overlong checklist
SubmittingPatches: mention subsystems with dedicated repositories
SubmittingPatches: who am I and who cares?
"gitweb", when sorting by age to show repositories with new
activities first, used to sort repositories with absolutely nothing
in it early, which was not very useful.
* os/gitweb-highlight-uncaptured:
gitweb: fix error in sanitize when highlight is enabled
When autoconf is used, any build on a different commit always ran
"config.status --recheck" even when unnecessary.
* jn/less-reconfigure:
build: do not automatically reconfigure unless configure.ac changed
When attempting to read the XDG-style $HOME/.config/git/config and
finding that $HOME/.config/git is a file, we gave a wrong error
message, instead of treating the case as "a custom config file does
not exist there" and moving on.
* jn/warn-on-inaccessible-loosen:
config: exit on error accessing any config file
doc: advertise GIT_CONFIG_NOSYSTEM
config: treat user and xdg config permission problems as errors
config, gitignore: failure to access with ENOTDIR is ok
The attribute mechanism didn't allow limiting attributes to be
applied to only a single directory itself with "path/" like the
exclude mechanism does.
* ja/directory-attrs:
Add directory pattern matching to attributes
"git fetch --mirror" and fetch that uses other forms of refspec with
wildcard used to attempt to update a symbolic ref that match the
wildcard on the receiving end, which made little sense (the real ref
that is pointed at by the symbolic ref would be updated anyway).
Symbolic refs no longer are affected by such a fetch.
* jc/fetch-ignore-symref:
fetch: ignore wildcarded refspecs that update local symbolic refs
The way "git svn" asked for password using SSH_ASKPASS and
GIT_ASKPASS was not in line with the rest of the system.
* ss/svn-prompt:
git-svn, perl/Git.pm: extend and use Git->prompt method for querying users
perl/Git.pm: Honor SSH_ASKPASS as fallback if GIT_ASKPASS is not set
git-svn, perl/Git.pm: add central method for prompting passwords
When make is run, the python scripts are created from *.py files that
are changed to use the python given by PYTHON_PATH. And PYTHON_PATH
is set by default to /usr/bin/python on Linux.
However, next time make is run with a different value in PYTHON_PATH,
we failed to regenerate these scripts.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/invalidate-i-t-a-cache-tree:
cache-tree: invalidate i-t-a paths after generating trees
cache-tree: fix writing cache-tree when CE_REMOVE is present
cache-tree: replace "for" loops in update_one with "while" loops
cache-tree: remove dead i-t-a code in verify_cache()
The options in git-fast-import(1) are not currently arranged in a
logical order, which has caused the '--done' options to be documented
twice (commit 3266de10).
Rearrange them into logical groups under subheadings.
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The descriptions of '--relative-marks' and '--no-relative-marks' make
more sense when read together instead of as two independent options.
Combine them into a single description block.
Signed-off-by: John Keeping <john@keeping.me.uk>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 00d3947 (Teach --wrap to only indent without wrapping) added
special behaviour for a width of zero in the '-w' argument to
'git-shortlog' but this was not documented. Fix this.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '--done' option to git-fast-import is documented twice in its manual
page. Combine the best bits of each description, keeping the location
of the instance that was added first.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test fails for me on NetBSD 6.0.1 and reports:
ok 1 - ref name '' is invalid
ok 2 - ref name '/' is invalid
ok 3 - ref name '/' is invalid with options --allow-onelevel
ok 4 - ref name '/' is invalid with options --normalize
error: bug in the test script: not 2 or 3 parameters to test-expect-success
The alleged bug is in this line:
invalid_ref NOT_MINGW '/' '--allow-onelevel --normalize'
invalid_ref() constructs a test case description using its last argument,
but the shell seems to split it up into two pieces if it contains a
space. Minimal test case:
# on NetBSD with /bin/sh
$ a() { echo $#-$1-$2; }
$ t="x"; a "${t:+$t}"
1-x-
$ t="x y"; a "${t:+$t}"
2-x-y
$ t="x y"; a "${t:+x y}"
1-x y-
# and with bash
$ t="x y"; a "${t:+$t}"
1-x y-
$ t="x y"; a "${t:+x y}"
1-x y-
This may be a bug in the shell, but here's a simple workaround: Construct
the description string first and store it in a variable, and then use
that to call test_expect_success().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano