We are sure that after merge_base_index() is done. cache-tree can
still be used with the final index. So don't destroy cache tree.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CE_REMOVE'd entries are removed here because only parts of the code
base (unpack_trees in fact) test this bit when they look for the
presence of an entry. Leaving them may confuse the code ignores this
bit and expects to see a real entry.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
prepare_to_write_split_index() does the major work, classifying
deleted, updated and added entries. write_link_extension() then just
writes it down.
An observation is, deleting an entry, then adding it back is recorded
as "entry X is deleted, entry X is added", not "entry X is replaced".
This is simpler, with small overhead: a replaced entry is stored
without its path, a new entry is store with its path.
A note about unpack_trees() and the deduplication code inside
prepare_to_write_split_index(). Usually tracking updated/removed
entries via read-cache API is enough. unpack_trees() manipulates the
index in a different way: it throws the entire source index out,
builds up a new one, copying/duplicating entries (using dup_entry)
from the source index over if necessary, then returns the new index.
A naive solution would be marking the entire source index "deleted"
and add their duplicates as new. That could bring $GIT_DIR/index back
to the original size. So we try harder and memcmp() between the
original and the duplicate to see if it needs updating.
We could avoid memcmp() too, by avoiding duplicating the original
entry in dup_entry(). The performance gain this way is within noise
level and it complicates unpack-trees.c. So memcmp() is the preferred
way to deal with deduplication.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The large part of this patch just follows CE_ENTRY_CHANGED
marks. replace_index_entry() is updated to update
split_index->base->cache[] as well so base->cache[] does not reference
to a freed entry.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Entries that belong to the base index should not be freed. Mark
CE_REMOVE to track them.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure entry addition does not lead to unifying the index. We don't
need to explicitly keep track of new entries. If ce->index is zero,
they're new. Otherwise it's unlikely that they are new, but we'll do a
thorough check later at writing time.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This split-index mode is designed to keep write cost proportional to
the number of changes the user has made, not the size of the work
tree. (Read cost is another matter, to be dealt separately.)
This mode stores index info in a pair of $GIT_DIR/index and
$GIT_DIR/sharedindex.<SHA-1>. sharedindex is large and unchanged over
time while "index" is smaller and updated often. Format details are in
index-format.txt, although not everything is implemented in this
patch.
Shared indexes are not automatically removed, because it's unclear if
the shared index is needed by any (even temporary) indexes by just
looking at it. After a while you'll collect stale shared indexes. The
good news is one shared index is useable for long, until
$GIT_DIR/index becomes too big and sluggish that the new shared index
must be created.
The safest way to clean shared indexes is to turn off split index
mode, so shared files are all garbage, delete them all, then turn on
split index mode again.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also update SHA-1 after writing. If we do not do that, the second
read_index() will see "initialized" variable already set and not read
.git/index again, which is fine, except istate->sha1 now has a stale
value.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Other fill_stat_cache_info() is on new entries, which should set
CE_ENTRY_ADDED in cache_changed, so we're safe.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cache entry additions, removals and modifications are separated
out. The rest of changes are still in the catch-all flag
SOMETHING_CHANGED, which would be more specific later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
remove_marked_cache_entries() deletes entries marked with
CE_REMOVE. But if there is no such entry, do not mark the index as
"changed" because that could trigger an index update unnecessarily.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We're running out of room for in-memory flags. But since b60e188
(Strip namelen out of ce_flags into a ce_namelen field - 2012-07-11),
we copy the namelen (first 12 bits) to ce_namelen field. So those bits
are free to use. Just make sure we do not accidentally write any
in-memory flags back.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is now only used by write_locked_index(). Move it to
read-cache.c (because read-cache.c will need to be aware of
alternate_index_output later) and unexport it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It turns out that some platforms do ship without curl-config even
though they build with the hardcoded default -lcurl and rely on it
to work.
* db/make-with-curl:
Makefile: default to -lcurl when no CURL_CONFIG or CURLDIR
Crash fix for codepath that miscounted the necessary size for an
array when spawning an external diff program.
* 'jk/external-diff-use-argv-array' (early part):
run_external_diff: use an argv_array for the command line
The original implementation of CURL_CONFIG support did not match the
original behavior of using -lcurl when CURLDIR was not set. This broke
implementations that were lacking curl-config but did have libcurl
installed along system libraries, such as MSysGit. In other words, the
assumption that curl-config is always installed was incorrect.
Instead, if CURL_CONFIG is empty or returns an empty result (e.g. due
to curl-config being missing), use the old behavior of falling back to
-lcurl.
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A last minute (and hopefully the last) fix to avoid coredumps due
to an incorrect pointer arithmetic.
* jk/pack-bitmap:
ewah_bitmap.c: do not assume size_t and eword_t are the same size
Make sure the marks are not written out when the transport helper
did not finish happily, to avoid leaving a marks file that is out of
sync with the reality.
* fc/transport-helper-sync-error-fix:
t5801 (remote-helpers): cleanup environment sets
transport-helper: fix sync issue on crashes
transport-helper: trivial cleanup
transport-helper: propagate recvline() error pushing
remote-helpers: make recvline return an error
transport-helper: remove barely used xchgline()
Ask curl-config how to link with the curl library, instead of
having only a limited configurability knobs in the Makefile.
* db/make-with-curl:
Makefile: allow static linking against libcurl
Makefile: use curl-config to determine curl flags
When buffer_grow changes the size of the buffer using realloc,
it first computes and saves the rlw pointer's offset into the
buffer using (uint8_t *) math before the realloc but then
restores it using (eword_t *) math.
In order to do this it's necessary to convert the (uint8_t *)
offset into an (eword_t *) offset. It was doing this by
dividing by the sizeof(size_t). Unfortunately sizeof(size_t)
is not same as sizeof(eword_t) on all platforms.
This causes illegal memory accesses and other bad things to
happen when attempting to use bitmaps on those platforms.
Fix this by dividing by the sizeof(eword_t) instead which
will always be correct for all platforms.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jx/i18n:
i18n: mention "TRANSLATORS:" marker in Documentation/CodingGuidelines
i18n: only extract comments marked with "TRANSLATORS:"
i18n: remove obsolete comments for translators in diffstat generation
i18n: fix uncatchable comments for translators in date.c
Work around /bin/sh that does not like "return" at the top-level
of a file that is dot-sourced from inside a function definition.
* km/avoid-non-function-return-in-rebase:
Revert "rebase: fix run_specific_rebase's use of "return" on FreeBSD"
rebase: avoid non-function use of "return" on FreeBSD
* ep/shell-command-substitution:
t9362-mw-to-git-utf8.sh: use the $( ... ) construct for command substitution
t9360-mw-to-git-clone.sh: use the $( ... ) construct for command substitution
git-tag.sh: use the $( ... ) construct for command substitution
git-revert.sh: use the $( ... ) construct for command substitution
git-resolve.sh: use the $( ... ) construct for command substitution
git-repack.sh: use the $( ... ) construct for command substitution
git-merge.sh: use the $( ... ) construct for command substitution
git-ls-remote.sh: use the $( ... ) construct for command substitution
git-fetch.sh: use the $( ... ) construct for command substitution
git-commit.sh: use the $( ... ) construct for command substitution
git-clone.sh: use the $( ... ) construct for command substitution
git-checkout.sh: use the $( ... ) construct for command substitution
install-webdoc.sh: use the $( ... ) construct for command substitution
howto-index.sh: use the $( ... ) construct for command substitution
Commit 512477b (tests: use "env" to run commands with temporary env-var
settings) missed some variables in the remote-helpers test. Also
standardize these.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently generate the command-line for the external
command using a fixed-length array of size 10. But if there
is a rename, we actually need 11 elements (10 items, plus a
NULL), and end up writing a random NULL onto the stack.
Rather than bump the limit, let's just use an argv_array, which
makes this sort of error impossible.
Noticed-by: Max L <infthi.inbox@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn by default puts its Subversion-tracking refs directly in
refs/remotes/*. This runs counter to Git's convention of using
refs/remotes/$remote/* for storing remote-tracking branches.
Furthermore, combining git-svn with regular git remotes run the risk of
clobbering refs under refs/remotes (e.g. if you have a git remote
called "tags" with a "v1" branch, it will overlap with the git-svn's
tracking branch for the "v1" tag from Subversion.
Even though the git-svn refs stored in refs/remotes/* are not "proper"
remote-tracking branches (since they are not covered by a proper git
remote's refspec), they clearly represent a similar concept, and would
benefit from following the same convention.
For example, if git-svn tracks Subversion branch "foo" at
refs/remotes/foo, and you create a local branch refs/heads/foo to add
some commits to be pushed back to Subversion (using "git svn dcommit),
then it is clearly unhelpful of Git to throw
warning: refname 'foo' is ambiguous.
every time you checkout, rebase, or otherwise interact with the branch.
The existing workaround for this is to supply the --prefix=quux/ to
git svn init/clone, so that git-svn's tracking branches end up in
refs/remotes/quux/* instead of refs/remotes/*. However, encouraging
users to specify --prefix to work around a design flaw in git-svn is
suboptimal, and not a long term solution to the problem. Instead,
git-svn should default to use a non-empty prefix that saves
unsuspecting users from the inconveniences described above.
This patch will only affect newly created git-svn setups, as the
--prefix option only applies to git svn init (and git svn clone).
Existing git-svn setups will continue with their existing (lack of)
prefix. Also, if anyone somehow prefers git-svn's old layout, they
can recreate that by explicitly passing an empty prefix (--prefix "")
on the git svn init/clone command line.
The patch changes the default value for --prefix from "" to "origin/",
updates the git-svn manual page, and fixes the fallout in the git-svn
testcases.
(Note that this patch might be easier to review using the --word-diff
and --word-diff-regex=. diff options.)
[ew: squashed description of <= 1.9 behavior into manpage]
Suggested-by: Thomas Ferris Nicolaisen <tfnico@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
* fc/remote-helper-fixes:
remote-bzr: trivial test fix
remote-bzr: include authors field in pushed commits
remote-bzr: add support for older versions
remote-hg: always normalize paths
remote-helpers: allow all tests running from any dir
These comments have to have "TRANSLATORS: " at the very beginning
and have to deviate from the usual multi-line comment formatting
convention.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nguyễn Thái Ngọc Duy