Receive-pack feeds its input to either index-pack or
unpack-objects, which will happily accept as many bytes as
a sender is willing to provide. Let's allow an arbitrary
cutoff point where we will stop writing bytes to disk.
Cleaning up what has already been written to disk is a
related problem that is not addressed by this patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When receiving a pack-file, it can be useful to abort the
`git unpack-objects`, if the pack-file is too big.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When receiving a pack-file, it can be useful to abort the
`git index-pack`, if the pack-file is too big.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --show-signature" and other commands that display the
verification status of PGP signature now shows the longer key-id,
as 32-bit key-id is so last century.
* lt/gpg-show-long-key-in-signature-verification:
gpg-interface: prefer "long" key format output when verifying pgp signatures
"git rev-parse --git-path hooks/<hook>" learned to take
core.hooksPath configuration variable (introduced during 2.9 cycle)
into account.
* ab/hooks:
rev-parse: respect core.hooksPath in --git-path
"git difftool" by default ignores the error exit from the backend
commands it spawns, because often they signal that they found
differences by exiting with a non-zero status code just like "diff"
does; the exit status codes 126 and above however are special in
that they are used to signal that the command is not executable,
does not exist, or killed by a signal. "git difftool" has been
taught to notice these exit status codes.
* jk/difftool-command-not-found:
difftool: always honor fatal error exit codes
"git checkout --detach <branch>" used to give the same advice
message as that is issued when "git checkout <tag>" (or anything
that is not a branch name) is given, but asking with "--detach" is
an explicit enough sign that the user knows what is going on. The
advice message has been squelched in this case.
* sb/checkout-explit-detach-no-advice:
checkout: do not mention detach advice for explicit --detach option
The t0027 test for CRLF conversion was timing dependent and flaky.
* tb/t0027-raciness-fix:
convert: Correct NNO tests and missing `LF will be replaced by CRLF`
When "git merge-recursive" works on history with many criss-cross
merges in "verbose" mode, the names the command assigns to the
virtual merge bases could have overwritten each other by unintended
reuse of the same piece of memory.
* rs/pull-signed-tag:
commit: use FLEX_ARRAY in struct merge_remote_desc
merge-recursive: fix verbose output for multiple base trees
commit: factor out set_merge_remote_desc()
commit: use xstrdup() in get_merge_parent()
The "t/" hierarchy is prone to get an unusual pathname; "make test"
has been taught to make sure they do not contain paths that cannot
be checked out on Windows (and the mechanism can be reusable to
catch pathnames that are not portable to other platforms as need
arises).
* js/test-lint-pathname:
t/Makefile: ensure that paths are valid on platforms we care
A small test clean-up for a topic introduced in v2.9.1 and later.
* sg/reflog-past-root:
t1410: remove superfluous 'git reflog' from the 'walk past root' test
A handful of tests that were broken under gettext-poison build have
been fixed.
* va/i18n:
t7411: become resilient to GETTEXT_POISON
t5520: become resilient to GETTEXT_POISON
t3404: become resilient to GETTEXT_POISON
Changes are described in CHANGES.
Contributions-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Contributions-by: Irfan Adilovic <irfanadilovic@gmail.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus's original was rebased to apply to the maintenance track just
in case binary distributors that are stuck in the past want to take
it to their older codebase. Let's merge it up to more modern
codebase that has Peff's gpg-interface clean-up topic that appeared
after Git 2.9 was tagged.
* lt/gpg-show-long-key-in-signature-verification-maint:
gpg-interface: prefer "long" key format output when verifying pgp signatures
Yes, gpg2 already uses the long format by default, but most
distributions seem to still have "gpg" be the older 1.x version due to
compatibility reasons. And older versions of gpg only show the 32-bit
short ID, which is quite insecure.
This doesn't actually matter for the _verification_ itself: if the
verification passes, the pgp signature is good. But if you don't
actually have the key yet, and want to fetch it, or you want to check
exactly which key was used for verification and want to check it, we
should specify the key with more precision.
In fact, we should preferentially specify the whole key fingerprint, but
gpg doesn't actually support that. Which is really quite sad.
Showing the "long" format improves things to at least show 64 bits of
the fingerprint. That's a lot better, even if it's not perfect.
This change the log format for "git log --show-signature" from
commit 2376d31787
merged tag 'v2.9.3'
gpg: Signature made Fri 12 Aug 2016 09:17:59 AM PDT using RSA key ID 96AFE6CB
gpg: Good signature from "Junio C Hamano <gitster@pobox.com>"
gpg: aka "Junio C Hamano <jch@google.com>"
gpg: aka "Junio C Hamano <junio@pobox.com>"
Merge: 2807cd7b25e0c1ceafc5
Author: Junio C Hamano <gitster@pobox.com>
Date: Fri Aug 12 10:02:18 2016 -0700
to
commit 2376d31787
merged tag 'v2.9.3'
gpg: Signature made Fri 12 Aug 2016 09:17:59 AM PDT
gpg: using RSA key B0B5E88696AFE6CB
gpg: Good signature from "Junio C Hamano <gitster@pobox.com>"
gpg: aka "Junio C Hamano <jch@google.com>"
gpg: aka "Junio C Hamano <junio@pobox.com>"
Merge: 2807cd7b25e0c1ceafc5
Author: Junio C Hamano <gitster@pobox.com>
Date: Fri Aug 12 10:02:18 2016 -0700
(note the longer key ID, but also the reflowing of the text) and also
changes the format in the merge messages when merging a signed
tag.
If you already use gpg2 (either because it's installed by default, or
because you have set your gpg_program configuration to point to gpg2),
that already used the long format, you'll also see a change: it will now
have the same formatting as gpg 1.x, and the verification string looks
something like
gpg: Signature made Sun 24 Jul 2016 12:24:02 PM PDT
gpg: using RSA key 79BE3E4300411886
gpg: Good signature from "Linus Torvalds <torvalds@linux-foundation.org>" [ultimate]
where it used to be on one line:
gpg: Signature made Sun 24 Jul 2016 12:24:02 PM PDT using RSA key ID 79BE3E4300411886
gpg: Good signature from "Linus Torvalds <torvalds@linux-foundation.org>" [ultimate]
so there is certainly a chance this could break some automated scripting.
But the 32-bit key ID's really are broken. Also note that because of the
differences between gpg-1.x and gpg-2.x, hopefully any scripted key ID
parsing code (if such code exists) is already flexible enough to not care.
This was triggered by the fact that the "evil32" project keys ended up
leaking to the public key servers, so now there are 32-bit aliases for
just about every open source developer that you can easily get by
mistake if you use the 32-bit short ID format.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The idea of the --git-path option is not only to avoid having to
prefix paths with the output of --git-dir all the time, but also to
respect overrides for specific common paths inside the .git directory
(e.g. `git rev-parse --git-path objects` will report the value of the
environment variable GIT_OBJECT_DIRECTORY, if set).
When introducing the core.hooksPath setting, we forgot to adjust
git_path() accordingly. This patch fixes that.
While at it, revert the special-casing of core.hooksPath in
run-command.c, as it is now no longer needed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some pathnames that are okay on ext4 and on HFS+ cannot be checked
out on Windows. Tests that want to see operations on such paths on
filesystems that support them must do so behind appropriate test
prerequisites, and must not include them in the source tree (instead
they should create them when they run). Otherwise, the source tree
cannot even be checked out.
Make sure that double-quotes, asterisk, colon, greater/less-than,
question-mark, backslash, tab, vertical-bar, as well as any non-ASCII
characters never appear in the pathnames with a new test-lint-* target
as part of a `make test`. To that end, we call `git ls-files` (ensuring
that the paths are quoted properly), relying on the fact that paths
containing non-ASCII characters are quoted within double-quotes.
In case that the source code does not actually live in a Git
repository (e.g. when extracted from a .zip file), or that the `git`
executable cannot be executed, we simply ignore the error for now; In
that case, our trusty Continuous Integration will be the last line of
defense and catch any problematic file name.
Noticed when a topic wanted to add a pathname with '>' in it. A
check like this will prevent a similar problems from happening in the
future.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the moment difftool's "trust exit code" logic always suppresses the
exit status of the diff utility we invoke. This is useful because we
don't want to exit just because diff returned "1" because the files
differ, but it's confusing if the shell returns an error because the
selected diff utility is not found.
POSIX specifies 127 as the exit status for "command not found", 126 for
"command found but is not executable" and values greater than 128 if the
command terminated because it received a signal [1] and at least bash
and dash follow this specification, while diff utilities generally use
"1" for the exit status we want to ignore.
Handle any value of 126 or greater as a special value indicating that
some form of fatal error occurred.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_08_02
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user asked for a detached HEAD specifically with `--detach`,
we do not need to give advice on what a detached HEAD state entails as
we can assume they know what they're getting into as they asked for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test added in 71abeb753f (reflog: continue walking the reflog
past root commits, 2016-06-03) contains an unnecessary 'git reflog'
execution, which was part of my debug/tracing instrumentation that I
somehow didn't manage to remove before submitting.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a non-reversible CRLF conversion is done in "git add",
a warning is printed on stderr (or Git dies, depending on checksafe)
The function commit_chk_wrnNNO() in t0027 was written to test this,
but did the wrong thing: Instead of looking at the warning
from "git add", it looked at the warning from "git commit".
This is racy because "git commit" may not have to do CRLF conversion
at all if it can use the sha1 value from the index (which depends on
whether "add" and "commit" run in a single second).
Correct t0027 and replace the commit for each and every file with a commit
of all files in one go.
The function commit_chk_wrnNNO() should be renamed in a separate commit.
Now that t0027 does the right thing, it detects a bug in covert.c:
This sequence should generate the warning `LF will be replaced by CRLF`,
but does not:
$ git init
$ git config core.autocrlf false
$ printf "Line\r\n" >file
$ git add file
$ git commit -m "commit with CRLF"
$ git config core.autocrlf true
$ printf "Line\n" >file
$ git add file
"git add" calls crlf_to_git() in convert.c, which calls check_safe_crlf().
When has_cr_in_index(path) is true, crlf_to_git() returns too early and
check_safe_crlf() is not called at all.
Factor out the code which determines if "git checkout" converts LF->CRLF
into will_convert_lf_to_crlf().
Update the logic around check_safe_crlf() and "simulate" the possible
LF->CRLF conversion at "git checkout" with help of will_convert_lf_to_crlf().
Thanks to Jeff King <peff@peff.net> for analyzing t0027.
Reported-By: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the macro FLEX_ALLOC_MEM instead of open-coding it. This shortens
and simplifies the code a bit.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the name member of struct merge_remote_desc to a FLEX_ARRAY and
use FLEX_ALLOC_STR to build the struct. This halves the number of
memory allocations, saves the storage for a pointer and avoids an
indirection when reading the name.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the indirect callers of make_virtual_commit() passes the result of
oid_to_hex() as the name, i.e. a pointer to a static buffer. Since the
function uses that string pointer directly in building a struct
merge_remote_desc, multiple entries can end up sharing the same name
inadvertently.
Fix that by calling set_merge_remote_desc(), which creates a copy of the
string, instead of building the struct by hand.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Export a helper function for allocating, populating and attaching a
merge_remote_desc to a commit.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Handle allocation errors for the name member just like we already do
for the struct merge_remote_desc itself.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
handle_message_id() duplicates the contents of the strbuf that is passed
to it. Its only caller proceeds to release the strbuf immediately after
that. Reuse it instead and make that change of object ownership more
obvious by inlining this short function.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This section is about "The FLEXPTR_* variants", so use FLEXPTR_ALLOC_STR
in the example.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The concerned test greps the error message in git_parse_source() which
contains "bad config line %d in submodule-blob %s".
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use test_i18ngrep function instead of grep for grepping strings.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The concerned test greps the output of exit_with_patch() in
git-rebase--interactive.sh script.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git rebase" tries to compare set of changes on the updated
upstream and our own branch, it computes patch-id for all of these
changes and attempts to find matches. This has been optimized by
lazily computing the full patch-id (which is expensive) to be
compared only for changes that touch the same set of paths.
* kw/patch-ids-optim:
rebase: avoid computing unnecessary patch IDs
patch-ids: add flag to create the diff patch id using header only data
patch-ids: replace the seen indicator with a commit pointer
patch-ids: stop using a hand-rolled hashmap implementation
The http-backend (the server-side component of smart-http
transport) used to trickle the HTTP header one at a time. Now
these write(2)s are batched.
* ew/http-backend-batch-headers:
http-backend: buffer headers before sending
"git mv dir non-existing-dir/" did not work in some environments
the same way as existing mainstream platforms. The code now moves
"dir" to "non-existing-dir", without relying on rename("A", "B/")
that strips the trailing slash of '/'.
* js/mv-dir-to-new-directory:
git mv: do not keep slash in `git mv dir non-existing-dir/`
Various small fixups to the "GIT_TRACE" facility.
* jk/trace-fixup:
trace: do not fall back to stderr
write_or_die: drop write_or_whine_pipe()
trace: disable key after write error
trace: correct variable name in write() error message
trace: cosmetic fixes for error messages
trace: use warning() for printing trace errors
trace: stop using write_or_whine_pipe()
trace: handle NULL argument in trace_disable()
Jeff King