If GIT_ASKPASS is not set and SSH_ASKPASS set, GIT_ASKPASS will
use SSH_ASKPASS.
Signed-off-by: Frank Li <lznuaa@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit fixes a bug in processing project-specific override in
a situation when there is no project, e.g. for the projects list page.
When 'snapshot' feature had project specific config override enabled
by putting
$feature{'snapshot'}{'override'} = 1;
(or equivalent) in $GITWEB_CONFIG, and when viewing toplevel gitweb
page, which means the projects list page (to be more exact this
happens for any project-less action), gitweb would put the following
Perl warnings in error log:
gitweb.cgi: Use of uninitialized value $git_dir in concatenation (.) or string at gitweb.cgi line 2065.
fatal: error processing config file(s)
gitweb.cgi: Use of uninitialized value $git_dir in concatenation (.) or string at gitweb.cgi line 2221.
gitweb.cgi: Use of uninitialized value $git_dir in concatenation (.) or string at gitweb.cgi line 2218.
The problem is in the following fragment of code:
# path to the current git repository
our $git_dir;
$git_dir = "$projectroot/$project" if $project;
# list of supported snapshot formats
our @snapshot_fmts = gitweb_get_feature('snapshot');
@snapshot_fmts = filter_snapshot_fmts(@snapshot_fmts);
For the toplevel gitweb page, which is the list of projects, $project is not
defined, therefore neither is $git_dir. gitweb_get_feature() subroutine
calls git_get_project_config() if project specific override is turned
on... but we don't have project here.
Those errors mentioned above occur in the following fragment of code in
git_get_project_config():
# get config
if (!defined $config_file ||
$config_file ne "$git_dir/config") {
%config = git_parse_project_config('gitweb');
$config_file = "$git_dir/config";
}
git_parse_project_config() calls git_cmd() which has '--git-dir='.$git_dir
There are (at least) three possible solutions:
1. Harden gitweb_get_feature() so that it doesn't call
git_get_project_config() if $project (and therefore $git_dir) is not
defined; there is no project for project specific config.
2. Harden git_get_project_config() like you did in your fix, returning early
if $git_dir is not defined.
3. Harden git_cmd() so that it doesn't add "--git-dir=$git_dir" if $git_dir
is not defined, and change git_get_project_config() so that it doesn't
even try to access $git_dir if it is not defined.
This commit implements both 1.) and 2.), i.e. gitweb_get_feature() doesn't
call project-specific override if $git_dir is not defined (if there is no
project), and git_get_project_config() returns early if $git_dir is not
defined.
Add a test for this bug to t/t9500-gitweb-standalone-no-errors.sh test.
Reported-by: Eli Barzilay <eli@barzilay.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds in the gitweb/README file a description of how to use gitweb
with several project roots using apache virtualhost rewrite rules.
Signed-off-by: Sylvain Rabot <sylvain@abstraction.fr>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As reported by Mark Lodato, "git bisect", when it was started with
path parameters that match no commit was kind of working without
taking account of path parameters and was reporting something like:
Bisecting: -1 revisions left to test after this (roughly 0 steps)
It is more correct and safer to just error out in this case, before
displaying the revisions left, so this patch does just that.
Note that this bug is very old, it exists at least since v1.5.5.
And it is possible to detect that case earlier in the bisect
algorithm, but it is not clear that it would be an improvement to
error out earlier, on the contrary it may change the behavior of
"git rev-list --bisect-all" for example, which is currently correct.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no longer support for external grep, as per bbc09c2 (grep: rip
out support for external grep, 2010-01-12), so remove the reference to it
from the documentation.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests for git-am using files with DOS line endings for various
combinations of `--keep-cr`, `--no-keep-cr` and `am.keepcr`.
Signed-off-by: Stefan-W. Hahn <stefan.hahn@s-hahn.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds the configuration `am.keepcr` for git-am. It also adds
`--no-keep-cr` parameter for git-am to give the possibility to
override configuration from command line.
Signed-off-by: Stefan-W. Hahn <stefan.hahn@s-hahn.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
c2ca1d7 (Allow mailsplit (and hence git-am) to handle mails with CRLF
line-endings, 2009-08-04) fixed "git mailsplit" to help people with
MUA whose output from save-as command uses CRLF as line terminators by
stripping CR at the end of lines.
However, when you know you are feeding output from "git format-patch"
directly to "git am", and especially when your contents have CR at the
end of line, such stripping is undesirable. To help such a use case,
teach --keep-cr option to "git am" and pass that to "git mailinfo".
Signed-off-by: Stefan-W. Hahn <stefan.hahn@s-hahn.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far this was an internal mechanism for rebase, but we will be exposing
it to the end users.
Signed-off-by: Stefan-W. Hahn <stefan.hahn@s-hahn.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The definition of TEST_OBJS in commit daa99a91 (Makefile: make sure
test helpers are rebuilt when headers change, 2010-01-26) moved a use
of $X to before the platform-specific section where it gets defined.
There are at least two ways to fix that:
- Change the definition of TEST_OBJS to use the = delayed
evaluation operator. This way, one need not worry about $(X)
needing to be defined before TEST_OBJS is set.
- Move the definition of TEST_OBJS to below the definition of $X.
Carry out the second. The later site of definition makes the code more
readable, since now a reader only has to look down one line to see what
TEST_OBJS is meant to be used for.
Oddly enough, with or without this change the behavior of the Makefile
is the same. Since TEST_PROGRAMS is defined with delayed evaluation,
the value of
TEST_OBJS := $(patsubst test-%$X,test-%.o,$(TEST_PROGRAMS))
is independent of the value of $X when it is evaluated: the $X in the
pattern and the $X in $(TEST_PROGRAMS) will simply always cancel out.
Make sure $X has the expected expansion anyway to make the code and
the reader’s sanity more robust in the face of future changes.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to see if user input "git show :path" makes sense tried to access
the index without properly checking the array bound.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, if gc.reflogexpire or gc.reflogexpire were set to "never"
or "false", the builtin default values were used instead.
Signed-off-by: Adam Simpkins <simpkins@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, prune treated an expiration time of 0 to mean that no
expire argument was supplied, and everything should be pruned. As a
result, "prune --expire=never" would prune all unreachable objects,
regardless of their timestamp.
prune can be called with --expire=never automatically by gc, when the
gc.pruneExpire configuration is set to "never".
Signed-off-by: Adam Simpkins <simpkins@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Importing functions from a .dll into Git for Windows' perl is pretty slow,
so let's avoid importing if it is not necessary.
This seems particularly slow in virtualized enviroments. Before this
change (on my machine):
$ time perl /libexec/git-core/git-svn rebase
Current branch master is up to date.
real 2m56.750s
user 0m3.129s
sys 2m39.232s
Afterwards:
$ time perl /libexec/git-core/git-svn rebase
Current branch master is up to date.
real 0m33.407s
user 0m1.409s
sys 0m23.054s
git svn rebase -n goes from 3m7.046s to 0m10.312s.
Signed-off-by: Josh Robb <josh_robb@fastmail.fm>
Acked-by: Eric Wong <normalperson@yhbt.net>
If parent J is an ancestor of parent I, then parent J should be
discarded, not I.
Note that J is an ancestor of I if and only if rev-list I..J is emtpy,
which is what we are testing here.
Signed-off-by: Tuomas Suutari <tuomas.suutari@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
When svn:mergeinfo contains two new parents in a specific order and
one is ancestor of the other, it is possible that git-svn discards the
wrong one. The first test case ("commit made to merged branch is
reachable from the merge") proves this.
The second test case ("merging two branches in one commit is detected
correctly") is just for completeness, since there was no test for
merging two (feature) branches to trunk in one commit.
Signed-off-by: Tuomas Suutari <tuomas.suutari@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
A few "svn cp" commands and commit commands were executed in incorrect
order. Therefore some of the desired commits were missing and some
were committed with wrong revision number in the commit message. This
made it hard to compare the produced git repository with the SVN
repository.
The dump file is updated too, but only the relevant parts and with
hand-edited timestamps to make history linear.
Signed-off-by: Tuomas Suutari <tuomas.suutari@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Requires a small change to wrap-for-bin.sh in order to work.
Signed-off-by: Steven Drake <sdrake@xnet.co.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We may later add a new configuration variable in "init" section that takes
a boolean value. Erroring out at the beginning of the config parser makes
life harder for later enhancement.
The existing configuration variable is parsed by git_config_pathname()
that checks and rejects init.templatedir that is unset without this extra
check. Remove it.
Signed-off-by: Steven Drake <sdrake@xnet.co.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the synopsis for git-grep(1), show that --cached and <tree>... cannot
be used together.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The convention for this particular page is to use AsciiDoc literal
strings only for options (`-x` or `--long`), but not for definition list
terms and not for <meta-vars>.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, the equivalent of "/dev/null" is "nul". This implements
compatibility wrappers around fopen() and freopen() that check for this
particular file name.
The new tests exercise code paths where this is relevant.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is required on Windows because git-notes is now a built-in
rather than a shell script.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In gitmkdtemp, the return value of mktemp is not tested correctly.
mktemp() always returns its 'template' argument, even upon failure.
An error is signalled by making the template an empty string.
Signed-off-by: Filippo Negroni <fnegroni@flexerasoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than only clearing GIT_INDEX_FILE, take the list of environment
variables to clear from local_repo_env, appending the settings for
GIT_DIR and GIT_WORK_TREE.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-submodule used to take care of clearing GIT_DIR whenever it operated
on a submodule index or configuration, but forgot to unset GIT_WORK_TREE
or other repo-local variables. This would lead to failures e.g. when
GIT_WORK_TREE was set.
This only happened in very unusual contexts such as operating on the
main worktree from outside of it, but since "git-gui: set GIT_DIR and
GIT_WORK_TREE after setup" (a9fa11fe5b) such failures could also
be provoked by invoking an external tool such as "git submodule update"
from the Git Gui in a standard setup.
Solve by using the newly introduced clear_local_git_env() shell function
to ensure that all repo-local environment variables are unset.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce an auxiliary function to clear all repo-local environment
variables. This should be invoked by any shell script that switches
repository during execution, to ensure that the environment is clean
and that things such as the git dir and worktree are set up correctly.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This prints the list of repo-local environment variables.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the list of GIT_* environment variables that are local to a
repository into a static list in environment.c, as it is also
useful elsewhere. Also add the missing GIT_CONFIG variable to the
list.
Make it easy to use the list both by NULL-termination and by size;
the latter (excluding the terminating NULL) is stored in the
local_repo_env_size define.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were written back when we always read objects from the standard
input. These days --revs and its friends can feed only the start and
end points and have the command internally enumerate the objects.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user runs
git config --global user.name Your Name
as suggested, user.name will be set to "Your". With this patch, the
suggested command will be
git config --global user.name "Your Name"
which will set user.name to "Your Name" and hopefully help users avoid
the former mistake.
Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A simple "git shortlog" outside of a git repository stalls
waiting for an input. Check if that's the case by testing with
isatty() before read_from_stdin(), and warn the user like
"git commit" does in a similar case.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since "git fetch" learned "--all" and "--multiple" options, it has become
tempting for users to say "git pull --all". Even though it may fetch from
remotes that do not need to be fetched from for merging with the current
branch, it is handy.
"git fetch" however clears the list of fetched branches every time it
contacts a different remote. Unless the current branch is configured to
merge with a branch from a remote that happens to be the last in the list
of remotes that are contacted, "git pull" that fetches from multiple
remotes will not be able to find the branch it should be merging with.
Make "fetch" clear FETCH_HEAD (unless --append is given) and then append
the list of branches fetched to it (even when --append is not given). That
way, "pull" will be able to find the data for the branch being merged in
FETCH_HEAD no matter where the remote appears in the list of remotes to be
contacted by "git fetch".
Reported-by: Michael Lukashov
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have a branch.$X.merge config option, but no branch.$X.remote, and
your configuration tries to push tracking branches, git will segfault.
The problem is that even though branch->merge_nr is 1, you don't actually
have an upstream since there is no remote. Other callsites generally
check explicitly that branch->merge is not NULL, so let's do that here,
too.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running a subfetch, the code propagated some options but not others.
Propagate --force, --update-head-ok and --keep options as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano