The output from a failure case had the test description message
and the first line of the actual test script concatenated on the
same line, which was ugly. Correct the output routine a bit to
make it more readable.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Match the main Makefile by separating COPTS from CFLAGS,
defining INSTALL, prefix, and bin. Add a new target 'install-tools'
to the main Makefile to install them.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch changes rev-parse users that pass a single argument
that is supposed to be a rev parameter to use "--verify".
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When not specifying the start point explicitly, we ended up
emitting ^0 in addition to the default HEAD. Be careful to see
if we have "$2" before finding out which commit to base the new
branch on.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The git-rev-parse command uses LF to separate each argument it
parses, so its users at least need to set IFS to LF to be able
to handle filenames with embedded SPs and TABs. Some commands,
however, can take and do expect arguments with embedded LF,
notably, "-S" (pickaxe) of diff family, so even this workaround
does not work for them.
When --sq flag to git-rev-parse is given, instead of showing one
argument per line, it outputs arguments quoted for consumption
with "eval" by the caller, to remedy this situation.
As an example, this patch converts git-whatchanged to use this
new feature.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Not just libcurl, but now we require curl executable as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Cause setting environment variable GIT_SSL_NO_VERIFY to turn off
curl's ssl peer verification.
Only use curl for http transfers, instead of curl and wget.
Make curl check ~/.netrc for credentials.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- Use git-rev-parse to allow sha1 tags references
- When the tag does not verify set an appropriate exit status
- Use git-sh-setup-script to verify the .git directory
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix a typo in git-unpack-objects documentation.
Signed-off-by: Jan Veldeman <jan@mind.be>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make debian/rules executable, and correct the spelling of rsync in
debian/control.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add --mbox option to export patches in a format resembling UNIX
mbox, so that later they can be concatenated and fed to
applymbox.
Add --check to look for lines that introduce bogus whitespaces.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- avoid duplicating [PATCH] in the commit message body if the
original commit has it already (happens for commits done from
mails via applymbox).
- check if the commit author is different from the one who is
running the script, and emit an appropriate "From:" and
"Date: " lines to the output.
- with '--date', emit "Date: " line to preserve the original
author date even for the user's own commit.
- teach mailinfo to grok not just "From: " but "Date: ".
The patch e-mail output by format-patch starts with the first
line from the original commit message, prefixed with [PATCH],
and optionally a From: line if you are reformatting a patch
obtained from somebody else, a Date: line from the original
commit if (1) --date is specified or (2) for somebody else's
patch, and the rest of the commit message body.
Expected use of this is to move the title line from the commit
to Subject: when sending it via an e-mail, and leave the From:
and the Date: lines as the first lines of your message.
The mailinfo command has been changed to read Date: (in addition
to From: it already understands) and do sensible things when
running applymbox.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
With "-c .dotest/0002" flag, the applymbox command can be told
to use existing .dotest/patch file after hand-fixing the patch
conflicts for the second patch in the mailbox, and continue on
from that message, skipping the already applied first patch in
.dotest/0001.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Adds --exclude=pattern option to the "git-apply" command. This
was useful while reimporting the BKCVS patchset dump of the
Linux kernel, starting at 2.4.0 and ending at 2.6.12-rc2 Ingo
announced some time ago to exclude BitKeeper directory.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The parsing code had a bug that failed to recognize an
incomplete line at the end of a fragment, and the fragment
application code had a comparison bug to recognize such. Fix
them to handle incomplete lines correctly.
Add a test script for patches with various combinations of
complete and incomplete lines to make sure the fix works.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This should make sure that if you have multiple people pushing to the
same tree, they cannot overwrite each others work, but have to merge
before being able to update the common reference tree.
We display the files where the child differs from the first parent
first in black in the file list window, followed by the second parent
in blue, and so on using different colors for each parent (provided
you don't have more than 6 parents; if you do we cycle around).
We now kick off a single git-diff-tree -r --stdin and feed it all
the commit pairs we want to know about, instead of doing a separate
git-diff-tree invocation for each.
We were trying to fetch using the merge-head name rather than the
merge-head SHA1 that we just got.
Now, http:// is broken anyway right now for packing, but this should
make it work for nonpacked repositories again.
Thanks to Ryan Anderson for setting me up to do this. I'd have used his
work, but I wanted to clean up the old git-tools repository before
merging it: it had old-style file modes etc that needed a round of
git-convert-cache to fix up.
Rename into a "tools" subdirectory, and change name of "dotest" to "applymbox".
Remove stripspace (which was already copied into git) and cvs2git (which
was likewise already copied into git, and then replaced by a much better
perl version).
All of this was brought on by Ryan Anderson shaming me into it. Thanks.
I guess.
git-fsck-cache complains about some of the odder ones, and is quiet
about the old (S_IFREG | 664) case, but that's wrong too.
Converting the kernel tree is too painful right now, but at least we
know how to do it if we ever want to.
Describe short-hand for remote repository used in fetch/pull.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Since pull and fetch are done often against the same remote
repository repeatedly, keeping the URL to pull from along with
the name of the head to use in $GIT_DIR/branches/$name makes a
lot of sense. Adopt that convention from Cogito, and try to be
compatible when possible; storing a partial URL and completing
it with a trailing path may not be understood by Cogito.
While we are at it, fix pulling a tag. Earlier, we updated only
refs/tags/$tag without updating FETCH_HEAD, and called
resolve-script using a stale (or absent) FETCH_HEAD.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
"Files" matches the find string against each of the files modified
by each commit, and can do exact, case-ignoring or regexp matching.
"Pickaxe" uses git-diff-tree -S'string' and can only do exact
matching. I called it "pickaxe" rather than "find within patch"
since it only finds commits where the string is present in the child
but not the parents or vice versa, and "pickaxe" is what the author
of that feature calls it.
Shut down connections that haven't even identified themselves as git
clients first. That should get rid of people who just connect to the
port and wait for something to happen.
Clarify that the hierarchy implied by the recommended workflow
is only informal.
Refer readers to nice illustration by Randy Dunlap.
Separate out the step to "push" to own public repository in the
workflow.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The cvsimport example in the cvs migration document was still
using the old syntax for target repository after new and
improved cvsimport-script was merged.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is using a lockless approach that allows us to handle children
dying without having to block SIGCHLD.
Right now our "solution" to too many kids is pretty damn rough, but it
at least shows what you can do.
Now, not all projects can be as refined as Linux. Before the final 1.0
release, we went through fifteen 0.99 patchfiles, and pl14 alone went
through subreleases 'a' through 'z'. Now _that_ is a release process.
Not to mention the odd-ball releases, like 0.96c+
Sadly, in this day and age of RPM's etc, we have silly limitations, and
I cannot call this release '0.99pl5a or some such awe-inspiring name
just because "rpmbuild" is such a party pooper. So it's just 0.99.1.
Oh well. Aspiring to such greatness as the Linux release numbering is
hubris anyway. You can attain such perfection only once in your life.
Describe where you can pull from with a bit more detail.
Clarify description of pushing.
Add a section on packing repositories.
Add a section on recommended workflow for the project lead,
subsystem maintainers and individual developers.
Move "Tag" section around to make the flow of example simpler to
follow.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Talk about publishing to a public repository. Also fixes a
couple of typos.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It's not any harder to include debian package support than to include a
spec file so here is the setup to build the equivalent debian package.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If you don't want the documentation simply build with
make RPMBUILD="rpmbuild --without docs"
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This makes it straightforward for people wanting to build and install
the git man pages and the rest of the documentation to do so.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This allows rebuilding the tarball when it is already present
without having to answer annoying questions from gzip
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This allows RPMBUILD to be overridden for people with
old versions of rpm or people who want to pass rpmbuild extra options.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
And finally what all of this has been leading up to.
The 2 line code change to record who made a tag,
and the 8 line code change to check that we recorded
the tag.
Gosh the error checking is always so much bigger than the code :)
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When testing tags I ran into an interesting problem.
git-tag-script dies if .git/refs/tags/ does not exist.
And that directory didn't get created when I build my repository,
so we need to create it if it doesn't exist.
Signed-of-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Junio C Hamano