The 'git sparse-checkout clean' subcommand is somewhat similar to 'git
clean' in that it will delete files that should not be in the worktree.
The big difference is that it focuses on the directories that should not
be in the worktree due to cone-mode sparse-checkout. It also does not
discriminate in the kinds of files and focuses on deleting entire
directories.
However, there are some restrictions that would be good to bring over
from 'git clean', specifically how it refuses to do anything without the
'-f'/'--force' or '-n'/'--dry-run' arguments. The 'clean.requireForce'
config can be set to 'false' to imply '--force'.
Add this behavior to avoid accidental deletion of files that cannot be
recovered from Git.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When users change their sparse-checkout definitions to add new
directories and remove old ones, there may be a few reasons why
directories no longer in scope remain (ignored or excluded files still
exist, Windows handles are still open, etc.). When these files still
exist, the sparse index feature notices that a tracked, but sparse,
directory still exists on disk and thus the index expands. This causes a
performance hit _and_ the advice printed isn't very helpful. Using 'git
clean' isn't enough (generally '-dfx' may be needed) but also this may
not be sufficient.
Add a new subcommand to 'git sparse-checkout' that removes these
tracked-but-sparse directories.
The implementation details provide a clear definition of what is happening,
but it is difficult to describe this without including the internal
implementation details. The core operation converts the index to a sparse
index (in memory if not already on disk) and then deletes any directories in
the worktree that correspond with a sparse directory entry in that sparse
index.
In the most common case, this means that a file will be removed if it is
contained within a directory that is both tracked and outside of the
sparse-checkout definition. However, there can be exceptions depending on
the current state of the index:
* If the worktree has a modification to a tracked, sparse file, then that
file's parent directories will be expanded instead of represented as
sparse directories. Siblings of those parent directories may be
considered sparse.
* If the user staged a sparse file with "git add --sparse", then that file
loses the SKIP_WORKTREE bit until the sparse-checkout is reapplied. Until
then, that file's parent directories are not represented as sparse
directory entries and thus will not be removed. Siblings of those parent
directories may be considered sparse. (There may be other reasons why
the SKIP_WORKTREE bit was removed for a file and this impact on the
sparse directories will apply to those as well.)
* If the user has a merge conflict outside of the sparse-checkout
definition, then those conflict entries prevent the parent directories
from being represented as sparse directory entries and thus are not
removed.
* The cases above present reasons why certain _file conditions_ will impact
which _directories_ are considered sparse. The list of tracked
directories that are outside of the sparse-checkout definition but not
represented as a sparse directory further reduces the list of files that
will be removed.
For these complicated reasons, the documentation details a potential list of
files that will be "considered for removal" instead of defining the list
concretely. The special cases can be handled by resolving conflicts,
committing staged changes, and running 'git sparse-checkout reapply' to
update the SKIP_WORKTREE bits as expected by the sparse-checkout definition.
It is important to make clear that this operation will remove ignored and
excluded files which would normally be ignored even by 'git clean -f' unless
the '-x' or '-X' option is provided. This is the most extreme method for
doing this, but it works when the sparse-checkout is in cone mode and is
expected to rescope based on directories, not files.
The current implementation always deletes these sparse directories
without warning. This is unacceptable for a released version, but those
features will be added in changes coming immediately after this one.
Note that this will not remove an untracked directory (or any of its
contents) if its parent is a tracked directory within the sparse-checkout
definition. This is required to prevent removing data created by tools that
perform caching operations for editors or build tools.
Thus, 'git sparse-checkout clean' is both more aggressive and more careful
than 'git clean -fx':
* It is more aggressive because it will remove _tracked_ files within the
sparse directories.
* It is less aggressive because it will leave _untracked_ files that are
not contained in sparse directories.
These special cases will be handled more explicitly in a future change that
expands tests for the 'git sparse-checkout clean' command. We handle some of
the modified, staged, and committed states including some impact on 'git
status' after cleaning.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic for the 'git sparse-checkout' builtin uses the_repository all
over the place, despite some use of a repository struct in different
method parameters. Complete this removal of the_repository by using
'repo' when possible.
In one place, there was already a local variable 'r' that was set to
the_repository, so move that to a method parameter.
We cannot remove the USE_THE_REPOSITORY_VARIABLE declaration as we are
still using global constants for the state of the sparse-checkout.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
3a54f5bd5d (merge/pull: add the "--compact-summary" option, 2025-06-12)
added the option --compact-summary to both merge and pull. It takes no
no argument, but for merge it got an argument help string. Remove it,
since it is unnecessary.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
dabecb9db2 (for-each-ref: introduce a '--start-after' option,
2025-07-15) added the option --start-after and referred to its argument
as "marker" in documentation and usage string, but not in the option's
short help. Use "marker" there as well for consistency and brevity.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Squelch false-positive compiler warning.
* dl/squelch-maybe-uninitialized:
t/unit-tests/clar: fix -Wmaybe-uninitialized with -Og
remote: bail early from set_head() if missing remote name
The case where a new submodule takes a path where used to be a
completely different subproject is now dealt a bit better than
before.
* kj/renamed-submodule:
fixup! submodule: skip redundant active entries when pattern covers path
fixup! submodule: prevent overwriting .gitmodules on path reuse
submodule: skip redundant active entries when pattern covers path
submodule: prevent overwriting .gitmodules on path reuse
Reduce implicit assumption and dependence on the_repository in the
object-file subsystem.
* ps/object-file-wo-the-repository:
object-file: get rid of `the_repository` in index-related functions
object-file: get rid of `the_repository` in `force_object_loose()`
object-file: get rid of `the_repository` in `read_loose_object()`
object-file: get rid of `the_repository` in loose object iterators
object-file: remove declaration for `for_each_file_in_obj_subdir()`
object-file: inline `for_each_loose_file_in_objdir_buf()`
object-file: get rid of `the_repository` when writing objects
odb: introduce `odb_write_object()`
loose: write loose objects map via their source
object-file: get rid of `the_repository` in `finalize_object_file()`
object-file: get rid of `the_repository` in `loose_object_info()`
object-file: get rid of `the_repository` when freshening objects
object-file: inline `check_and_freshen()` functions
object-file: get rid of `the_repository` in `has_loose_object()`
object-file: stop using `the_hash_algo`
object-file: fix -Wsign-compare warnings
In "git remote set-head", we can take varying numbers of arguments
depending on whether we saw the "-d" or "-a" options. But the first
argument is always the remote name.
The current code is somewhat awkward in that it conditionally handles
the remote name up-front like this:
if (argc)
remote = ...from argv[0]...
and then only later decides to bail if we do not have the right number
of arguments for the options we saw.
This makes it hard to figure out if "remote" is always set when it needs
to be. Both for humans, but also for compilers; with -Og, gcc complains
that "remote" can be accessed without being initialized (although this
is not true, as we'd always die with a usage message in that case).
Let's instead enforce the presence of the remote argument up front,
which fixes the compiler warning and is easier to understand. It does
mean duplicating the code to print a usage message, but it's a single
line.
Noticed-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Tested-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add/etc -p" now honor the diff.context configuration variable,
and also they learn to honor the -U<n> command-line option.
* lm/add-p-context:
add-patch: add diff.context command line overrides
add-patch: respect diff.context configuration
t: use test_config in t4055
t: use test_grep in t3701 and t4055
The config API had a set of convenience wrapper functions that
implicitly use the_repository instance; they have been removed and
inlined at the calling sites.
* ps/config-wo-the-repository: (21 commits)
config: fix sign comparison warnings
config: move Git config parsing into "environment.c"
config: remove unused `the_repository` wrappers
config: drop `git_config_set_multivar()` wrapper
config: drop `git_config_get_multivar_gently()` wrapper
config: drop `git_config_set_multivar_in_file_gently()` wrapper
config: drop `git_config_set_in_file_gently()` wrapper
config: drop `git_config_set()` wrapper
config: drop `git_config_set_gently()` wrapper
config: drop `git_config_set_in_file()` wrapper
config: drop `git_config_get_bool()` wrapper
config: drop `git_config_get_ulong()` wrapper
config: drop `git_config_get_int()` wrapper
config: drop `git_config_get_string()` wrapper
config: drop `git_config_get_string()` wrapper
config: drop `git_config_get_string_multi()` wrapper
config: drop `git_config_get_value()` wrapper
config: drop `git_config_get_value()` wrapper
config: drop `git_config_get()` wrapper
config: drop `git_config_clear()` wrapper
...
Code clean-up.
* kn/for-each-ref-skip-updates:
ref-filter: use REF_ITERATOR_SEEK_SET_PREFIX instead of '1'
t6302: add test combining '--start-after' with '--exclude'
for-each-ref: reword the documentation for '--start-after'
for-each-ref: fix documentation argument ordering
ref-cache: use 'size_t' instead of int for length
When building with clang-22 and DEVELOPER=1 mode, this warning causes us
to fail compilation:
builtin/revert.c:114:13: error: default initialization of an object of type 'const char' leaves the object uninitialized [-Werror,-Wdefault-const-init-var-unsafe]
114 | const char sentinel_value;
| ^
The compiler is right that this code is a bit funny. We declare a const
value without an initializer. It cannot be assigned to because of the
const, but without an initializer it has no predictable value. So as a
variable it can never have any useful function, and if we tried to look
at it, we'd get undefined behavior.
But it does have a function. We never use its value, but rather use its
address as a sentinel value for some other variables:
const char *gpg_sign = &sentinel_value;
...maybe set gpg_sign via parse_options...
if (gpg_sign != &sentinel_value)
...we got a non-default value...
Normally we'd use NULL as a sentinel value for a pointer, but it doesn't
work here because we also want to detect --no-gpg-sign, which is marked
by setting the pointer to NULL. We need a separate "this was not
touched" value, which is what this sentinel variable gives us.
So the code is correct as-is, but the sentinel variable itself is funny
enough that it's understandable for a compiler warning to flag it. Let's
try to appease the compiler.
There are a few possible options:
1. Instead of a variable, we could just construct an artificial
sentinel address like "1", "-1", etc. I think these technically
fall afoul of the C standard (even if we do not access them, even
constructing invalid pointers is not always allowed). But it's also
something we do elsewhere, and even happens in some standard
interfaces (e.g., mmap()'s MMAP_FAILED value). It does involve some
annoying casts, though.
2. We can mark it as static. That gives it a definite value, but
perhaps makes people wonder if the static-ness is important, when
it's not.
3. We can just give it a value to shut the compiler up, even though
nobody cares about that value.
I went with (3) here as the smallest and most obvious change.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase -i" with bogus rebase.instructionFormat configuration
failed to produce the todo file after recording the state files,
leading to confused "git status"; this has been corrected.
* ow/rebase-verify-insn-fmt-before-initializing-state:
rebase: write script before initializing state
Redefine where the multi-pack-index sits in the object subsystem,
which recently was restructured to allow multiple backends that
support a single object source that belongs to one repository. A
midx does span mulitple "object sources".
* ps/object-store-midx:
midx: remove now-unused linked list of multi-pack indices
packfile: stop using linked MIDX list in `get_all_packs()`
packfile: stop using linked MIDX list in `find_pack_entry()`
packfile: refactor `get_multi_pack_index()` to work on sources
midx: stop using linked list when closing MIDX
packfile: refactor `prepare_packed_git_one()` to work on sources
midx: start tracking per object database source
"git for-each-ref" learns "--start-after" option to help
applications that want to page its output.
* kn/for-each-ref-skip:
ref-cache: set prefix_state when seeking
for-each-ref: introduce a '--start-after' option
ref-filter: remove unnecessary else clause
refs: selectively set prefix in the seek functions
ref-cache: remove unused function 'find_ref_entry()'
refs: expose `ref_iterator` via 'refs.h'
Move structure definition from unrelated header file to where it
belongs.
* jc/rev-list-info-cleanup:
rev-list: make "struct rev_list_info" static to the only user
This patch compliments the previous commit, where builtins that use
add-patch infrastructure now respect diff.context and
diff.interHunkContext file configurations.
In particular, this patch helps users who don't want to set persistent
context configurations or just want a way to override them on a one-time
basis, by allowing the relevant builtins to accept corresponding command
line options that override the file configurations.
This mimics commands such as diff and log, which allow for both context
file configuration and command line overrides.
Signed-off-by: Leon Michalak <leonmichalak6@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_commit_info() function accepts a parameter that can be used
to stop the commit parsing early. However, none of the callers use
this feature, and testing proved that the performance gain of
stopping parsing early is negligible and unmeasurable.
Signed-off-by: Han Young <hanyang.tony@bytedance.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for '--start-after' states that the flag cannot be
used with general pattern matching. This is a bit vague, since there is
no clear understanding about what 'general' means here. Rewrite the
sentence to be more specific.
While here, fix a typo in the 'OPT_STRING'.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git commit" that concludes a conflicted merge failed to notice and remove
existing comment added automatically (like "# Conflicts:") when the
core.commentstring is set to 'auto'.
* ac/auto-comment-char-fix:
config: set comment_line_str to "#" when core.commentChar=auto
commit: avoid scanning trailing comments when 'core.commentChar' is "auto"
configure_added_submodule always writes an explicit
submodule.<name>.active entry, even when the new
path is already matched by submodule.active
patterns. This leads to unnecessary and cluttered configuration.
change the logic to centralize wildmatch-based pattern lookup,
in configure_added_submodule. Wrap the active-entry write in a conditional
that only fires when that helper reports no existing pattern covers the
submodule’s path.
Signed-off-by: K Jayatheerth <jayatheerthkulkarni2005@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adding a submodule at a path that previously hosted
another submodule (e.g., 'child') reuses the submodule
name derived from the path. If the original submodule
was only moved (e.g., to 'child_old') and not renamed,
this silently overwrites its configuration in .gitmodules.
This behavior loses user configuration and causes
confusion when the original submodule is expected
to remain intact. It assumes that the path-derived
name is always safe to reuse, even though the name
might still be in use elsewhere in the repository.
Teach module_add() to check if the computed submodule
name already exists in the repository's submodule config,
and if so, refuse the operation unless the user explicitly
renames the submodule or uses the --force option,
which will automatically generate a unique name by
appending a number (e.g., child1).
Signed-off-by: K Jayatheerth <jayatheerthkulkarni2005@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clean up the way how signature on commit objects are exported to
and imported from fast-import stream.
* cc/fast-import-export-signature-names:
fast-(import|export): improve on commit signature output format
In "config.c" we host both the business logic to read and write config
files as well as the logic to parse specific Git-related variables. On
the one hand this is mixing concerns, but even more importantly it means
that we cannot easily remove the dependency on `the_repository` in our
config parsing logic.
Move the logic into "environment.c". This file is a grab bag of all
kinds of global state already, so it is quite a good fit. Furthermore,
it also hosts most of the global variables that we're parsing the config
values into, making this an even better fit.
Note that there is one hidden change: in `parse_fsync_components()` we
use an `int` to iterate through `ARRAY_SIZE(fsync_component_names)`. But
as -Wsign-compare warnings are enabled in this file this causes a
compiler warning. The issue is fixed by using a `size_t` instead.
This change allows us to drop the `USE_THE_REPOSITORY_VARIABLE`
declaration.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a106 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_set_multivar()`.
All callsites are adjusted so that they use
`repo_config_set_multivar(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a106 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove
`git_config_get_multivar_gently()`. All callsites are adjusted so that
they use `repo_config_get_multivar_gently(the_repository, ...)` instead.
While some callsites might already have a repository available, this
mechanical conversion is the exact same as the current situation and
thus cannot cause any regression. Those sites should eventually be
cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a106 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove
`git_config_set_multivar_in_file_gently()`. All callsites are adjusted
so that they use
`repo_config_set_multivar_in_file_gently(the_repository, ...)` instead.
While some callsites might already have a repository available, this
mechanical conversion is the exact same as the current situation and
thus cannot cause any regression. Those sites should eventually be
cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a106 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove
`git_config_set_in_file_gently()`. All callsites are adjusted so that
they use `repo_config_set_in_file_gently(the_repository, ...)` instead.
While some callsites might already have a repository available, this
mechanical conversion is the exact same as the current situation and
thus cannot cause any regression. Those sites should eventually be
cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a106 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_set()`. All
callsites are adjusted so that they use `repo_config_set(the_repository,
...)` instead. While some callsites might already have a repository
available, this mechanical conversion is the exact same as the current
situation and thus cannot cause any regression. Those sites should
eventually be cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a106 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_set_gently()`.
All callsites are adjusted so that they use
`repo_config_set_gently(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a106 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_set_in_file()`.
All callsites are adjusted so that they use
`repo_config_set_in_file(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a106 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_get_bool()`. All
callsites are adjusted so that they use
`repo_config_get_bool(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a106 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_get_ulong()`. All
callsites are adjusted so that they use
`repo_config_get_ulong(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a106 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_get_int()`. All
callsites are adjusted so that they use
`repo_config_get_int(the_repository, ...)` instead. While some callsites
might already have a repository available, this mechanical conversion is
the exact same as the current situation and thus cannot cause any
regression. Those sites should eventually be cleaned up in a later patch
series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a106 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_get_string()`.
All callsites are adjusted so that they use
`repo_config_get_string(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a106 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_get_string()`.
All callsites are adjusted so that they use
`repo_config_get_string(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a106 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove
`git_config_get_string_multi()`. All callsites are adjusted so that they
use `repo_config_get_string_multi(the_repository, ...)` instead. While
some callsites might already have a repository available, this
mechanical conversion is the exact same as the current situation and
thus cannot cause any regression. Those sites should eventually be
cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a106 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_get_value()`. All
callsites are adjusted so that they use
`repo_config_get_value(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a106 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_get()`. All
callsites are adjusted so that they use `repo_config_get(the_repository,
...)` instead. While some callsites might already have a repository
available, this mechanical conversion is the exact same as the current
situation and thus cannot cause any regression. Those sites should
eventually be cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee