This makes git-rev-list use the same command line syntax to mark the
commits as git-rev-tree does, and instead of just allowing a start and
end commit, it allows an arbitrary list of "interesting" and "uninteresting"
commits.
For example, imagine that you had three branches (a, b and c) that you
are interested in, but you don't want to see stuff that already exists
in another persons three releases (x, y and z). You can do
git-rev-list a b c ^x ^y ^z
(order doesn't matter, btw - feel free to put the uninteresting ones
first or otherwise swithc them around), and it will show all the
commits that are reachable from a/b/c but not reachable from x/y/z.
The old syntax "git-rev-list start end" would not be written as
"git-rev-list start ^end", or "git-rev-list ^end start".
There's no limit to the number of heads you can specify (unlike
git-rev-tree, which can handle a maximum of 16 heads).
This patch makes an incompatible change to the protocol used by
rpull/rpush which will let it be extended in the future without
incompatible changes.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
As Linus pointed out on the mailing list discussion, -B should
break a files that has many inserts even if it still keeps
enough of the original contents, so that the broken pieces can
later be matched with other files by -M or -C. However, if such
a broken pair does not get picked up by -M or -C, we would want
to apply different criteria; namely, regardless of the amount of
new material in the result, the determination of "rewrite"
should be done by looking at the amount of original material
still left in the result. If you still have the original 97
lines from a 100-line document, it does not matter if you add
your own 13 lines to make a 110-line document, or if you add 903
lines to make a 1000-line document. It is not a rewrite but an
in-place edit. On the other hand, if you did lose 97 lines from
the original, it does not matter if you added 27 lines to make a
30-line document or if you added 997 lines to make a 1000-line
document. You did a complete rewrite in either case.
This patch introduces a post-processing phase that runs after
diffcore-rename matches up broken pairs diffcore-break creates.
The purpose of this post-processing is to pick up these broken
pieces and merge them back into in-place modifications. For
this, the score parameter -B option takes is changed into a pair
of numbers, and it takes "-B99/80" format when fully spelled
out. The first number is the minimum amount of "edit" (same
definition as what diffcore-rename uses, which is "sum of
deletion and insertion") that a modification needs to have to be
broken, and the second number is the minimum amount of "delete"
a surviving broken pair must have to avoid being merged back
together. It can be abbreviated to "-B" to use default for
both, "-B9" or "-B9/" to use 90% for "edit" but default (80%)
for merge avoidance, or "-B/75" to use default (99%) "edit" and
75% for merge avoidance.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This cleans up diff_scoreopt_parse() function that is used to
parse the fractional notation -B, -C and -M option takes. The
callers are modified to check for errors and complain. Earlier
they silently ignored malformed input and falled back on the
default.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch updates diff documentation and usage strings:
- clarify the semantics of -R. It is not "output in reverse";
rather, it is "I will feed diff backwards". Semantically
they are different when -C is involved.
- describe -O in usage strings of diff-* brothers. It was
implemented, documented but not described in usage text.
Also it adds -O to diff-helper. Like -S (and unlike -M/-C/-B),
this option can work on sanitized diff-raw output produced by
the diff-* brothers. While we are at it, the call it makes to
diffcore is cleaned up to use the diffcore_std() like everybody
else, and the declaration for the low level diffcore routines
are moved from diff.h (public) to diffcore.h (private between
diff.c and diffcore backends).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make it return copied source and insertion separately, so that
later implementation of heuristics can use them more flexibly.
This does not change the heuristics implemented in
diffcore-rename nor diffcore-break in any way.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
git-tar-tree: remove tests of long path handling out of t5000-tar-tree.sh
and make test script cope with tar programs displaying file modification
date as hh:mm (newer variants show it as hh:mm:ss).
This makes the test cover only basic functionality that is expected to
be handled even by older tar programs. Tests for long filenames (which
require pax extended headers) can be added separately.
I ran this test successfully with GNU tar 1.13, 1.14 and 1.15.1.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
write_trailer() writes the last 10k (a full block) of the tar archive.
write_if_needed() writes out a block *if* it is full and then sets
the offset to 0. In nine out of ten cases the messed up write_trailer()
function didn't manage to fill the block thus not writing anything at
all, truncating the archive. I was "lucky" to hit the other case and so
my testing ran OK.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
document difference in behaviour w/ regard to tree vs. commit and
correct author information.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This adds sha1_file_size() helper function and uses it in the
rename/copy similarity estimator. The helper function handles
deltified object as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When a remote repository is deltified, we need to get the
objects that a deltified object we want to obtain is based upon.
The initial parts of each retrieved SHA1 file is inflated and
inspected to see if it is deltified, and its base object is
asked from the remote side when it is. Since this partial
inflation and inspection has a small performance hit, it can
optionally be skipped by giving -d flag to git-*-pull commands.
This flag should be used only when the remote repository is
known to have no deltified objects.
Rsync transport does not have this problem since it fetches
everything the remote side has.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Functions that do many things are bad. We should basically
just parse the arguments in main(). We're not quite there
yet, but it's a step in the right direction.
Make a separate helper for parsing the header of an object file
(really carefully) and for unpacking the rest. This means that
anybody who uses the "unpack_sha1_header()" interface can easily
look at the header and decide to unpack the rest too, without
doing any extra work.
It's for people who aren't necessarily interested in the whole
unpacked file, but do want to know the header information (size,
type, etc..)
For example, the delta code can use this to figure out whether
an object is already a delta object, and what it is a delta
against, without actually bothering to unpack all of the actual
data in the delta.
The core GIT repository has trees that record regular file mode
in 0664 instead of normalized 0644 pattern. Comparing such a
tree with another tree that records the same file in 0644
pattern without content changes with git-diff-tree causes it to
feed otherwise unmodified pairs to the diff_change() routine,
which triggers a sanity check routine and barfs. This patch
fixes the problem, along with the fix to another caller that
uses unnormalized mode bits to call diff_change() routine in a
similar way.
Without this patch, you will see "fatal error" from diff-tree
when you run git-deltafy-script on the core GIT repository
itself.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Use "git commit" instead of "git-commit-script", and talk about using
"git log" before introducing the more complex "git-whatchanged".
In short, try to make it feel a bit more normal to those poor souls
using CVS.
Do some whitspace edits too, to make the side notes stand out a bit
more.
The "git" script is just shorthand: "git xyz <args>" will just execute
"git-xyz-script <args>", which is useful for people used to the CVS
naming convention. So "git log" will run the new git-log-script, which
is just a wrapper around the new pretty-printing git-rev-list.
Cheesy.
That pretty-prints the resulting commit messages, so
git-rev-list --pretty HEAD v2.6.12-rc5 | less -S
basically ends up being a log of the changes between -rc5
and current head.
It uses the pretty-printing helper function I just extracted
from diff-tree.c.
It had already tried to do that, but with the independent
rounding of the number of '+' and '-' characters, it would
sometimes do 80-char lines after all.
This fixes the problem with ls-tree which failed to show
"drivers/char" directory when the user asked for "drivers/char/"
from the command line. At the same time, if "drivers/char" were
a non directory, "drivers/char/" would not show it. This is
consistent with the way diffcore-pathspec has been recently
fixed.
This adds back the diffcore-pathspec test,dropped when my
earlier diffcore-pathspec fix was rejected.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There were duplicate script pieces to help comparing diff
output, which this patch consolidates into the t/diff-lib.sh
library.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Removing (and ignoring) them is wrong, since that means
that a pathspec of "xxxx/" would match a regular filename
of "xxxx", which is obviously incorrect.
This mean sthat you can give a beginning/end pair to git-rev-list,
and it will show all entries that are reachable from the beginning
but not the end.
For example
git-rev-list v2.6.12-rc5 v2.6.12-rc4
shows all commits that are in -rc5 but are not in -rc4.
The way broken deletes and creates are shown in the -p
(diff-patch) output format has become consistent with how
rename/copy edits are shown. They will show "dissimilarity
index" value, immediately following the "deleted file mode" and
"new file mode" lines.
The git-apply is taught to grok such an extended header.
Signed-off-by: Junio C Hamano <junkio@cox.net>
A new diffcore filter diffcore-order is introduced. This takes
a text file each of whose line is a shell glob pattern. Patches
that match a glob pattern on an earlier line in the file are
output before patches that match a later line, and patches that
do not match any glob pattern are output last.
A typical orderfile for git project probably should look like
this:
README
Makefile
Documentation
*.h
*.c
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Should be obvious...
- Use $VISUAL, $EDITOR, in this order if set, and fall back on
vi.
- Status R, C, D, N usually are followed by number, so adjust
case arms to that pattern.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Although it was described as such, git-mkdelta didn't really attempt to
find the best delta against any previous object in the list, but was
only able to create a delta against the preceeding object. This patch
reworks the code to fix that limitation and hopefully makes it a bit
clearer than before, including fixing the delta loop detection which was
broken.
This means that
git-mkdelta sha1 sha2 sha3 sha4 sha5 sha6
will now create a sha2 delta against sha1, a sha3 delta against either
sha2 or sha1 and keep the best one, a sha4 delta against either sha3,
sha2 or sha1, etc. The --max-behind argument limits that search for the
best delta to the specified number of previous objects in the list. If
no limit is specified it is unlimited (note: it might run out of
memory with long object lists).
Also added a -q (quiet) switch so it is possible to have 3 levels of
output: -q for nothing, -v for verbose, and if none of -q nor -v is
specified then only actual changes on the object database are shown.
Finally the git-deltafy-script has been updated accordingly, and some
bugs fixed (thanks to Stephen C. Tweedie for spotting them).
This version has been toroughly tested and I think it is ready
for public consumption.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is meant to make raw git not hugely less usable than something
like raw CVS. I want to make a 1.0 release of the plumbing, and the
actual commit part was just too intimidating.
A new diffcore transformation, diffcore-break.c, is introduced.
When the -B flag is given, a patch that represents a complete
rewrite is broken into a deletion followed by a creation. This
makes it easier to review such a complete rewrite patch.
The -B flag takes the same syntax as the -M and -C flags to
specify the minimum amount of non-source material the resulting
file needs to have to be considered a complete rewrite, and
defaults to 99% if not specified.
As the new test t4008-diff-break-rewrite.sh demonstrates, if a
file is a complete rewrite, it is broken into a delete/create
pair, which can further be subjected to the usual rename
detection if -M or -C is used. For example, if file0 gets
completely rewritten to make it as if it were rather based on
file1 which itself disappeared, the following happens:
The original change looks like this:
file0 --> file0' (quite different from file0)
file1 --> /dev/null
After diffcore-break runs, it would become this:
file0 --> /dev/null
/dev/null --> file0'
file1 --> /dev/null
Then diffcore-rename matches them up:
file1 --> file0'
The internal score values are finer grained now. Earlier
maximum of 10000 has been raised to 60000; there is no user
visible changes but there is no reason to waste available bits.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The commit 15d061b435
[PATCH] Fix the way diffcore-rename records unremoved source.
still leaves unneeded delete records in its output stream by
mistake, which was covered up by having an extra check to turn
such a delete into a no-op downstream. Fix the check in the
diffcore-rename to simplify the output routine.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When preparing data to feed the external diff, we should give
the mode we obtained from the caller, even when we are dealing
with a file with 0{40} SHA1 (i.e. the caller said "look at the
filesystem"), since the mode passed by the caller via
diff_addremove() or diff_change() is always trustworthy.
This is _not_ a bugfix --- the existing code stat() on the file
ifself and does the same computation on st.st_mode to compute
the mode the same way the caller did to give the original mode.
We cannot remove the stat() call from here, but the extra
computation to create the mode value is unnecessary.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
A new macro, DIFF_PAIR_RENAME(), is introduced to distinguish a
filepair that is a rename/copy (the definition of which is src
and dst are different paths, of course). This removes the hack
used in the record_rename_pair() to always put a non-zero value
in the score field.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The three diff-* brothers had a sequence of calls into diffcore
that were almost identical. Introduce a new diffcore_std()
function that takes all the necessary arguments to consolidate
it. This will make later enhancements and changing the order of
diffcore application simpler.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The score number that follow R/C status were parsed but the
parse pointer was not updated, causing the entire line to become
unrecognized. This patch fixes this problem.
There was a test missing to catch this breakage, which this
commit adds as t4009-diff-rename-4.sh. The diff-raw tests used
in related t4005-diff-rename-2.sh (the same test without -z) and
t4007-rename-3.sh were stricter than necessarily, despite that
the comment for the tests said otherwise. This patch also
corrects them.
The documentation is updated to say that the status can
optionally be followed by a number called "score"; it does not
have to stay similarity index forever and there is no reason to
limit it only to C and R.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Instead of always assuming it can be read with a single
read() system call, loop around properly.
Pointed out by Pasky, but I ended up implementing it differently
from his suggested patch.
Linus Torvalds