Convert users of struct child_process to using the managed argv_array
args instead of providing their own. This shortens the code a bit and
ensures that the allocated memory is released automatically after use.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Corner-case bugfixes for "git fetch" around reflog handling.
* jk/fetch-reflog-df-conflict:
ignore stale directories when checking reflog existence
fetch: load all default config at startup
* rs/use-child-process-init-more:
bundle: split out ref writing from bundle_create
bundle: split out a helper function to compute and write prerequisites
bundle: split out a helper function to create pack data
use child_process_init() to initialize struct child_process variables
The code to use cache-tree trusted the on-disk data too much
and fell into an infinite loop.
* jk/cache-tree-protect-from-broken-libgit2:
cache-tree: avoid infinite loop on zero-entry tree
The option name "--store" was used early in development, but
never even made it into an applied patch, let alone a
released version of git. I forgot to update the matching
documentation at the time, though.
Noticed-by: Jesse Hopkins <jesse.hopkins@lmco.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to fixing trivial and obvious typos, be careful about
the following points:
- Spell ASCII, URL and CRC in ALL CAPS;
- Spell Linux as Capitalized;
- Do not omit periods in "i.e." and "e.g.".
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
line-log tries to access all parents of a commit, but only the first
parent has been loaded if "--first-parent" is specified, resulting
in a crash.
Limit the number of parents to one if "--first-parent" is specified.
Reported-by: Eric N. Vander Weele <ericvw@gmail.com>
Signed-off-by: Tzvetan Mikov <tmikov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we update a ref, we have two rules for whether or not
we actually update the reflog:
1. If the reflog already exists, we will always append to
it.
2. If log_all_ref_updates is set, we will create a new
reflog file if necessary.
We do the existence check by trying to open the reflog file,
either with or without O_CREAT (depending on log_all_ref_updates).
If it fails, then we check errno to see what happened.
If we were not using O_CREAT and we got ENOENT, the file
doesn't exist, and we return success (there isn't a reflog
already, and we were not told to make a new one).
If we get EISDIR, then there is likely a stale directory
that needs to be removed (e.g., there used to be "foo/bar",
it was deleted, and the directory "foo" was left. Now we
want to create the ref "foo"). If O_CREAT is set, then we
catch this case, try to remove the directory, and retry our
open. So far so good.
But if we get EISDIR and O_CREAT is not set, then we treat
this as any other error, which is not right. Like ENOENT,
EISDIR is an indication that we do not have a reflog, and we
should silently return success (we were not told to create
it). Instead, the current code reports this as an error, and
we fail to update the ref at all.
Note that this is relatively unlikely to happen, as you
would have to have had reflogs turned on, and then later
turned them off (it could also happen due to a bug in fetch,
but that was fixed in the previous commit). However, it's
quite easy to fix: we just need to treat EISDIR like ENOENT
for the non-O_CREAT case, and silently return (note that
this early return means we can also simplify the O_CREAT
case).
Our new tests cover both cases (O_CREAT and non-O_CREAT).
The first one already worked, of course.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we start the git-fetch program, we call git_config to
load all config, but our callback only processes the
fetch.prune option; we do not chain to git_default_config at
all.
This means that we may not load some core configuration
which will have an effect. For instance, we do not load
core.logAllRefUpdates, which impacts whether or not we
create reflogs in a bare repository.
Note that I said "may" above. It gets even more exciting. If
we have to transfer actual objects as part of the fetch,
then we call fetch_pack as part of the same process. That
function loads its own config, which does chain to
git_default_config, impacting global variables which are
used by the rest of fetch. But if the fetch is a pure ref
update (e.g., a new ref which is a copy of an old one), we
skip fetch_pack entirely. So we get inconsistent results
depending on whether or not we have actual objects to
transfer or not!
Let's just load the core config at the start of fetch, so we
know we have it (we may also load it again as part of
fetch_pack, but that's OK; it's designed to be idempotent).
Our tests check both cases (with and without a pack). We
also check similar behavior for push for good measure, but
it already works as expected.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'for-junio' of git://bogomips.org/git-svn:
git-svn: use SVN::Ra::get_dir2 when possible
git-svn: add space after "W:" prefix in warning
git-svn: (cleanup) remove editor param passing
git-svn: prepare SVN::Ra config pieces once
Git.pm: add specified name to tempfile template
git-svn: disable _rev_list memoization
git-svn: save a little memory as fetch progresses
git-svn: remove unnecessary DESTROY override
git-svn: reload RA every log-window-size
git-svn.txt: advertise pushurl with dcommit
git-svn: remove mergeinfo rev caching
git-svn: cache only mergeinfo revisions
git-svn: reduce check_cherry_pick cache overhead
git-svn: only look at the root path for svn:mergeinfo
git-svn: only look at the new parts of svn:mergeinfo
Allow painting or not painting (partial) matches in context lines
when showing "grep -C<num>" output in color.
* rs/grep-color-words:
grep: add color.grep.matchcontext and color.grep.matchselected
This avoids the following failure with normal "get_dir" on newer
versions of SVN (tested with SVN 1.8.8-1ubuntu3.1):
Incorrect parameters given: Could not convert '%ld' into a number
get_dir2 also has the potential to be more efficient by requesting
less data.
ref: <1414636504.45506.YahooMailBasic@web172304.mail.ir2.yahoo.com>
ref: <1414722617.89476.YahooMailBasic@web172305.mail.ir2.yahoo.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Cc: Hin-Tak Leung <htl10@users.sourceforge.net>
The bundle_create() function has a number of logical steps:
process the input, write the refs, and write the packfile.
Recent commits split the first and third into separate
sub-functions. It's worth splitting the middle step out,
too, if only because it makes the progression of the steps
more obvious.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new helper compute_and_write_prerequistes() is ugly, but it
cannot be avoided. Ideally we should avoid a function that computes
and does I/O at the same time, but the prerequisites lines in the
output needs the human readable title only to help the recipient of
the bundle. The code copies them straight from the rev-list output
and immediately discards as no other internal computation needs that
information.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The create_bundle() function, while it does one single logical
thing, takes a rather large implementation to do so.
Let's start separating what it does into smaller steps to make it
easier to see what is going on. This is a first step to separate
out the actual pack-data generation, after the earlier part of the
function figures out which part of the history to place in the
bundle.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The loop in cache-tree's update_one iterates over all the
entries in the index. For each one, we find the cache-tree
subtree which represents our path (creating it if
necessary), and then recurse into update_one again. The
return value we get is the number of index entries that
belonged in that subtree. So for example, with entries:
a/one
a/two
b/one
We start by processing the first entry, "a/one". We would
find the subtree for "a" and recurse into update_one. That
would then handle "a/one" and "a/two", and return the value
2. The parent function then skips past the 2 handled
entries, and we continue by processing "b/one".
If the recursed-into update_one ever returns 0, then we make
no forward progress in our loop. We would process "a/one"
over and over, infinitely.
This should not happen normally. Any subtree we create must
have at least one path in it (the one that we are
processing!). However, we may also reuse a cache-tree entry
we found in the on-disk index. For the same reason, this
should also never have zero entries. However, certain buggy
versions of libgit2 could produce such bogus cache-tree
records. The libgit2 bug has since been fixed, but it does
not hurt to protect ourselves against bogus input coming
from the on-disk data structures.
Note that this is not a die("BUG") or assert, because it is
not an internal bug, but rather a corrupted on-disk
structure. It's possible that we could even recover from it
(by throwing out the bogus cache-tree entry), but it is not
worth the effort; the important thing is that we report an
error instead of looping infinitely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://ozlabs.org/~paulus/gitk:
gitk: Remove boilerplate for configuration variables
gitk: Show detached HEAD if --all is specified
gitk: Do not depend on Cygwin's "kill" command on Windows
If HEAD is detached, 'gitk --all' does not show it. This is inconvenient
for frontend program, and for example git log does show the detached HEAD.
gitk uses git rev-parse to find a list of branches to show.
Apparently, the command does not include detached HEAD to output if
--all argument is specified. This has been discussed in [1] and stated
as expected behavior. So rev-parse's parameters should be tuned in gitk.
[1] http://thread.gmane.org/gmane.comp.version-control.git/255996
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Windows does not necessarily mean Cygwin, it could also be MSYS. The
latter ships with a version of "kill" that does not understand "-f".
In msysgit this was addressed by shipping Cygwin's version of kill.
Properly fix this by using the stock Windows "taskkill" command instead,
which is available since Windows XP Professional.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Memoizing these initialization functions saves some memory for
long fetches which require scanning many unwanted revisions
before any wanted revisions happen.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This should help me track down errors in git-svn more easily:
write .git/Git_XXXXXX: Bad file descriptor
at /usr/lib/perl5/SVN/Ra.pm line 623
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Allow diff tool backend to stop early by exiting with a non-zero
status.
* da/difftool:
difftool: add support for --trust-exit-code
difftool--helper: exit when reading a prompt answer fails
In a tarball extract whose files are all read-only, running GPG
tests would have failed due to unwritable files.
* mg/lib-gpg-ro-safety:
t/lib-gpg: make gpghome files writable
z/OS port
* dm/port2zos:
compat/bswap.h: detect endianness from XL C compiler macros
Makefile: reorder linker flags in the git executable rule
git-compat-util.h: support variadic macros with the XL C compiler
Tighten the logic to decide that an unreachable cruft is
sufficiently old by covering corner cases such as an ancient object
becoming reachable and then going unreachable again, in which case
its retention period should be prolonged.
* jk/prune-mtime: (28 commits)
drop add_object_array_with_mode
revision: remove definition of unused 'add_object' function
pack-objects: double-check options before discarding objects
repack: pack objects mentioned by the index
pack-objects: use argv_array
reachable: use revision machinery's --indexed-objects code
rev-list: add --indexed-objects option
rev-list: document --reflog option
t5516: test pushing a tag of an otherwise unreferenced blob
traverse_commit_list: support pending blobs/trees with paths
make add_object_array_with_context interface more sane
write_sha1_file: freshen existing objects
pack-objects: match prune logic for discarding objects
pack-objects: refactor unpack-unreachable expiration check
prune: keep objects reachable from recent objects
sha1_file: add for_each iterators for loose and packed objects
count-objects: use for_each_loose_file_in_objdir
count-objects: do not use xsize_t when counting object size
prune-packed: use for_each_loose_file_in_objdir
reachable: mark index blobs as SEEN
...
Add machinery to alternatively use AsciiDoctor to format our
documentation.
* bc/asciidoctor:
Documentation: remove Asciidoctor linkgit macro
Documentation: refactor common operations into variables
Documentation: implement linkgit macro for Asciidoctor
Documentation: move some AsciiDoc parameters into variables
Call child_process_init() instead of zeroing the memory of variables of
type struct child_process by hand before use because the former is both
clearer and shorter.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe