When you are doing a tree-diff, there are basically two options: do not
recurse into subtrees at all, or recurse indefinitely. While most
callers would want to always recurse and see full pathnames, some may
want the efficiency of looking only at a particular level of the tree.
This is currently easy to do for the top-level (just turn off
recursion), but you cannot say "show me what changed in subdir/, but do
not recurse".
This patch adds a max-depth parameter which is measured from the closest
pathspec match, so that you can do:
git log --raw --max-depth=1 -- a/b/c
and see the raw output for a/b/c/, but not those of a/b/c/d/
(instead of the raw output you would see for a/b/c/d).
Co-authored-by: Toon Claes <toon@iotcl.com>
Signed-off-by: Toon Claes <toon@iotcl.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The within_depth() function is used to check whether pathspecs limited
by a max-depth parameter are acceptable. It takes a path to check, a
maximum depth, and a "base" depth. It counts the components in the
path (by counting slashes), adds them to the base, and compares them to
the maximum.
However, if the base does not have any slashes at all, we always return
`true`. If the base depth is 0, then this is correct; no matter what the
maximum is, we are always within it. However, if the base depth is
greater than 0, then we might return an erroneous result.
This ends up not causing any user-visible bugs in the current code. The
call sites in dir.c always pass a base depth of 0, so are unaffected.
But tree_entry_interesting() uses this function differently: it will
pass the prefix of the current entry, along with a `1` if the entry is a
directory, in essence checking whether items inside the entry would be
of interest. It turns out not to make a difference in behavior, but the
reasoning is complex.
Given a tree like:
file
a/file
a/b/file
walking the tree and calling tree_entry_interesting() will yield the
following results:
(with max_depth=0):
file: yes
a: yes
a/file: no
a/b: no
(with max_depth=1):
file: yes
a: yes
a/file: yes
a/b: no
So we have inconsistent behavior in considering directories interesting.
If they are at the edge of our depth but at the root, we will recurse
into them, but then find all of their entries uninteresting (e.g., in
the first case, we will look at "a" but find "a/*" uninteresting). But
if they are at the edge of our depth and not at the root, then we will
not recurse (in the second example, we do not even bother entering
"a/b").
This turns out not to matter because the only caller which uses
max-depth pathspecs is cmd_grep(), which only cares about blob entries.
From its perspective, it is exactly the same to not recurse into a
subtree, or to recurse and find that it contains no matching entries.
Not recursing is merely an optimization.
It is debatable whether tree_entry_interesting() should consider such an
entry interesting. The only caller does not care if it sees the tree
itself, and can benefit from the optimization. But if we add a
"max-depth" limiter to regular diffs, then a diff with
DIFF_OPT_TREE_IN_RECURSIVE would probably want to show the tree itself,
but not what it contains.
This patch just fixes within_depth(), which means we consider such
entries uninteresting (and makes the current caller happy). If we want
to change that in the future, then this fix is still the correct first
step, as the current behavior is simply inconsistent.
This has the effect the function tree_entry_interesting() now behaves
like following on the first example:
(with max_depth=0):
file: yes
a: no
a/file: no
a/b: no
Meaning we won't step in "a/" no more to realize all "a/*" entries are
uninterested, but we stop at the tree entry itself.
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Toon Claes <toon@iotcl.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 25e5e2bf85 (combine-diff: support format_callback,
2011-08-19), the combined-diff code learned how to make a multi-sourced
`diff_filepair` to pass to a diff callback. When we create each
filepair, we do not bother to fill in many of the fields, because they
would make no sense (e.g. there can be no rename score or broken_pair
flag because we do not go through the diffcore filters). However, we did
not even bother to zero them, leading to random values. Let's make sure
everything is blank with xcalloc(), just as the regular diff code does.
We would potentially want to set the `status` flag to
something non-zero, but it is not clear to what. Possibly a
new DIFF_STATUS_COMBINED would make sense, as this is not
strictly a modification, nor does it fit any other category.
Since it is not yet clear what callers would want, this
patch simply leaves it as `0`, the same empty flag that is
seen when `diffcore_std` is not used at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Toon Claes <toon@iotcl.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixes for GitHub Actions Coverity job.
* js/github-ci-win-coverity-fix:
ci(coverity): output the build log upon error
ci(coverity): fix building on Windows
Revert a botched bswap.h change that broke ntohll() functions on
big-endian systems with __builtin_bswap32/64().
* ss/revert-builtin-bswap-stuff:
Revert "bswap.h: add support for built-in bswap functions"
Recently generating the version-def.h file and the config-list.h
file have been updated, which broke versions of "sed" that do not
want to be fed a file that ends with an incomplete line, and/or that
do not understand the more recent "-E" option to use extended
regular expression.
Fix them in response to a build-failure reported on Solaris boxes.
cf. https://lore.kernel.org/git/09f954b8-d9c3-418f-ad4b-9cb9b063f4ae@comstyle.com/
Reported-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Collin Funk <collin.funk1@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 6547d1c9 (bswap.h: add support for built-in bswap
functions, 2025-04-23) tweaked the way the bswap32/64 macros are
defined, on platforms with __builtin_bswap32/64 supported, the
bswap32/64 macros are defined even on big endian platforms.
However the rest of this file assumes that bswap32/64() are defined
ONLY on little endian machines and uses that assumption to redefine
ntohl/ntohll macros. The said commit broke t4014-format-patch.sh test,
among many others on s390x.
Revert the commit.
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
• Replace with phrases that are more standard (“all-or-nothing”
instead of “-none”)
• Add coordinating words that make it less likely for you to trip
over the sentence (“*that* "gc" can do”)
• Use “SMTP” instead of both SMTP and smtp
• Don’t mention `git fsck --reference` since the previous release
was not affected by this minor bug. Also say “errored out” since
the git-refs(1) bug was there in v2.48.0 as well
• Use the more widespread “linked” instead of “secondary worktree”
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is quite helpful to know what Coverity said, exactly, in case it
fails to analyze the code.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When I added the Coverity workflow in a56b6230d0 (ci: add a GitHub
workflow to submit Coverity scans, 2023-09-25), I merely converted an
Azure Pipeline definition that had been running successfully for ages.
In the meantime, the current Coverity documentation describes a very
different way to install the analysis tool, recommending to add the
`bin/` directory to the _end_ of `PATH` (when originally, IIRC, it was
recommended to add it to the _beginning_ of the `PATH`).
This is crucial! The reason is that the current incarnation of the
Windows variant of Coverity's analysis tools come with a _lot_ of DLL
files in their `bin/` directory, some of them interferring rather badly
with the `gcc.exe` in Git for Windows' SDK that we use to run the
Coverity build. The symptom is a cryptic error message:
make: *** [Makefile:2960: headless-git.o] Error 1
make: *** Waiting for unfinished jobs....
D:\git-sdk-64-minimal\mingw64\bin\windres.exe: preprocessing failed.
make: *** [Makefile:2679: git.res] Error 1
make: *** [Makefile:2893: git.o] Error 1
make: *** [Makefile:2893: builtin/add.o] Error 1
Attempting to detect unconfigured compilers in build
|0----------25-----------50----------75---------100|
****************************************************
Warning: Build command make.exe exited with code 2. Please verify that the build completed successfully.
Warning: Emitted 0 C/C++ compilation units (0%) successfully
0 C/C++ compilation units (0%) are ready for analysis
For more details, please look at:
D:/a/git/git/cov-int/build-log.txt
The log (which the workflow is currently not configured to reveal) then
points out that the `windows.h` header cannot be found, which is _still_
not very helpful. The underlying root cause is that the `gcc.exe` in Git
for Windows' SDK determines the location of the header files via the
location of certain DLL files, and finding the "wrong" ones first on the
`PATH` misleads that logic.
Let's fix this problem by following Coverity's current recommendation
and append the `bin/` directory in which `cov-int` can be found to the
_end_ of `PATH`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests that compare $HOME and $(pwd), which should be the same
directory unless the tests chdir's around, would fail when the user
enters the test directory via symbolic links, which has been
corrected.
* mm/test-in-absolute-home:
t: run tests from a normalized working directory
Adjust to newer version of libcURL.
* jk/curl-easy-setopt-typefix:
curl: fix symbolic constant typechecks with curl_easy_setopt()
curl: fix integer variable typechecks with curl_easy_setopt()
curl: fix integer constant typechecks with curl_easy_setopt()
As of Homebrew's update to cURL v8.14.0, there are new compile errors to
be observed in the `osx-gcc` job of Git's CI builds:
In file included from http.h:8,
from imap-send.c:36:
In function 'setup_curl',
inlined from 'curl_append_msgs_to_imap' at imap-send.c:1460:9,
inlined from 'cmd_main' at imap-send.c:1581:9:
/usr/local/Cellar/curl/8.14.0/include/curl/typecheck-gcc.h:50:15: error: call to '_curl_easy_setopt_err_long' declared with attribute warning: curl_easy_setopt expects a long argument [-Werror=attribute-warning]
50 | _curl_easy_setopt_err_long(); \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/local/Cellar/curl/8.14.0/include/curl/curl.h:54:7: note: in definition of macro 'CURL_IGNORE_DEPRECATION'
54 | statements \
| ^~~~~~~~~~
imap-send.c:1423:9: note: in expansion of macro 'curl_easy_setopt'
1423 | curl_easy_setopt(curl, CURLOPT_PORT, srvc->port);
| ^~~~~~~~~~~~~~~~
[... many more instances of nearly identical warnings...]
See for example this CI workflow run:
https://github.com/git/git/actions/runs/15454602308/job/43504278284#step:4:307
The most likely explanation is the entry "typecheck-gcc.h: fix the
typechecks" in cURL's release notes (https://curl.se/ch/8.14.0.html).
Nearly identical compile errors afflicted recently-updated Debian
setups, which have been addressed by `jk/curl-easy-setopt-typefix`.
However, on macOS Git is built with different build options, which
uncovered more instances of `int` values that need to be cast to
constants, which were not covered by 6f11c42e8e (curl: fix integer
constant typechecks with curl_easy_setopt(), 2025-06-04). Let's
explicitly convert even those remaining `int` constants in
`curl_easy_setopt()` calls to `long` parameters.
In addition to looking at the compile errors of the `osx-gcc` job, I
verified that there are no other instances of the same issue that need
to be handled in this manner (and that might not be caught by our CI
builds because of yet other build options that might skip those code
parts), I ran the following command and inspected all 23 results
manually to ensure that the fix is now actually complete:
git grep -n curl_easy_setopt |
grep -ve ',.*, *[A-Za-z_"&]' \
-e ',.*, *[-0-9]*L)' \
-e ',.*,.* (long)'
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 2cc5b0facf (git-gui: extract script to generate "tclIndex",
2025-03-11) converted commands in a Makefile rule to a shell script.
In this process, the Makefile variable $@ had to be replaced by the
file name that it represents, 'lib/tclIndex'. However, the occurrence
in `rm -f $@` was missed. In a shell script, $@ expands to all
command line arguments, which happen to be the source files lib/*.tcl
in this case. Needless to say that we do not want to remove source
files during a build. Replace $@ by the intended 'lib/tclIndex'.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
In the GitHub workflow used in Git's CI builds, the `vs test` jobs use a
subset of a specific revision of Git for Windows' SDK to run Git's test
suite. This revision is validated by another CI workflow to ensure that
said revision _can_ run Git's test suite successfully, skipping buggy
updates in Git for Windows' SDK.
The `win+Meson test` jobs do things differently, quite differently. They
use the Bash of the Git for Windows version that is installed on the
runners to run Git's test suite.
This difference has consequences.
When 68cb0b5253 (builtin/receive-pack: add option to skip connectivity
check, 2025-05-20) introduced a test case that uses `tee <file> | git
receive-pack` as `--receive-pack` parameter (imitating an existing
pattern in the same test script), it hit just the sweet spot to trigger
a bug in the MSYS2 runtime shipped in Git for Windows v2.49.0. This
version is the one currently installed on GitHub's runners.
The problem is that the `git receive-pack` process finishes while the
`tee` process does not need to write anything anymore and therefore does
not receive an EOF. Instead, it should receive a SIGPIPE, but the bug in
the MSYS2 runtime prevents that from working as intended. As a
consequence, the `tee` process waits for more input from the `git.exe
send-pack` process but none is coming, and the test script patiently
waits until the 6h timeout hits.
Only every once in a while, the `git receive-pack` process manages to
send an EOF to the `tee` process and no hang occurs. Therefore, the
problem can be worked around by cancelling the clearly-hanging job after
twenty or so minutes and re-running it, repeating the process about half
a dozen times, until the hang was successfully avoided.
This bug in the MSYS2 runtime has been fixed in the meantime, which is
the reason why the same test case causes no problems in the `win test`
and the `vs test` jobs.
This will continue to be the case until the Git for Windows version on
the GitHub runners is upgraded to a version that distributes a newer
MSYS2 runtime version. However, as of time of writing, this _is_ the
latest Git for Windows version, and will be for another 1.5 weeks, until
Git v2.50.0 is scheduled to appear (and shortly thereafter Git for
Windows v2.50.0). Traditionally it takes a while before the runners pick
up the new version.
We could just wait it out, six hours at a time.
Here, I opt for an alternative: Detect the buggy MSYS2 runtime and
simply skip the test case. It's not like the `receive-pack` test cases
are specific to Windows, and even then, to my chagrin the CI runs in
git-for-windows/git spend around ten hours of compute time each and
every time to run the entire test suite on all the platforms, even the
tests that cover cross-platform code, and for Windows alone we do that
three times: with GCC, with MSVC, and with MSVC via Meson. Therefore, I
deem it more than acceptable to skip this test case in one of those
matrices.
For good luck, also the preceding test case is skipped in that scenario,
as it uses the same `--receive-pack=tee <file> | git receive-pack`
pattern, even though I never observed that test case to hang in
practice.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with the previous two commits, we should be passing long integers,
not regular ones, to curl_easy_setopt(), and compiling against curl 8.14
loudly complains if we don't.
This patch catches the remaining cases, which are ones where we pass
curl's own symbolic constants. We'll cast them to long manually in each
call.
It seems kind of weird to me that curl doesn't define these constants as
longs, since the point of them is to pass to curl_easy_setopt(). But in
the curl documentation and examples, they clearly show casting them as
part of the setopt calls. It may be that there is some reason not to
push the type into the macro, like backwards compatibility. I didn't
dig, as it doesn't really matter: we have to follow what existing curl
versions ask for anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As discussed in the previous commit, we should be passing long integers,
not regular ones, to curl_easy_setopt(), and compiling against curl 8.14
loudly complains if we don't.
That patch fixed integer constants by adding an "L". This one deals with
actual variables.
Arguably these variables could just be declared as "long" in the first
place. But it's actually kind of awkward due to other code which uses
them:
- port is conceptually a short, and we even call htons() on it (though
weirdly it is defined as a regular int).
- ssl_verify is conceptually a bool, and we assign to it from
git_config_bool().
So I think we could probably switch these out for longs without hurting
anything, but it just feels a bit weird. Doubly so because if you don't
set USE_CURL_FOR_IMAP_SEND set, then the current types are fine!
So let's just cast these to longs in the curl calls, which makes what's
going on obvious. There aren't that many spots to modify (and as you can
see from the context, we already have some similar casts).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The curl documentation specifies that curl_easy_setopt() takes either:
...a long, a function pointer, an object pointer or a curl_off_t,
depending on what the specific option expects.
But when we pass an integer constant like "0", it will by default be a
regular non-long int. This has always been wrong, but seemed to work in
practice (I didn't dig into curl's implementation to see whether this
might actually be triggering undefined behavior, but it seems likely and
regardless we should do what the docs say).
This is especially important since curl has a type-checking macro that
causes building against curl 8.14 to produce many warnings. The specific
commit is due to their 79b4e56b3 (typecheck-gcc.h: fix the typechecks,
2025-04-22). Curiously, it does only seem to trigger when compiled with
-O2 for me.
We can fix it by just marking the constants with a long "L".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King