The userdiff driver for the Scheme language has been extended to
cover other Lisp dialects.
* sb/userdiff-lisp-family:
userdiff: extend Scheme support to cover other Lisp dialects
userdiff: tighten word-diff test case of the scheme driver
Hook scripts defined via the configuration system can now be
configured to run in parallel.
* ar/parallel-hooks:
t1800: test SIGPIPE with parallel hooks
hook: allow hook.jobs=-1 to use all available CPU cores
hook: add hook.<event>.enabled switch
hook: move is_known_hook() to hook.c for wider use
hook: warn when hook.<friendly-name>.jobs is set
hook: add per-event jobs config
hook: add -j/--jobs option to git hook run
hook: mark non-parallelizable hooks
hook: allow pre-push parallel execution
hook: allow parallel hook execution
hook: parse the hook.jobs config
config: add a repo_config_get_uint() helper
repository: fix repo_init() memleak due to missing _clear()
Promisor remote handling has been refactored and fixed in
preparation for auto-configuration of advertised remotes.
* cc/promisor-auto-config-url:
t5710: use proper file:// URIs for absolute paths
promisor-remote: remove the 'accepted' strvec
promisor-remote: keep accepted promisor_info structs alive
promisor-remote: refactor accept_from_server()
promisor-remote: refactor has_control_char()
promisor-remote: refactor should_accept_remote() control flow
promisor-remote: reject empty name or URL in advertised remote
promisor-remote: clarify that a remote is ignored
promisor-remote: pass config entry to all_fields_match() directly
promisor-remote: try accepted remotes before others in get_direct()
The check that implements the logic to see if an in-core cache-tree
is fully ready to write out a tree object was broken, which has
been corrected.
* dl/cache-tree-fully-valid-fix:
cache-tree: fix inverted object existence check in cache_tree_fully_valid
Code clean-up to use the right instance of a repository instance in
calls inside refs subsystem.
* sp/refs-reduce-the-repository:
refs/reftable-backend: drop uses of the_repository
refs: remove the_hash_algo global state
refs: add struct repository parameter in get_files_ref_lock_timeout_ms()
Most unfortunately macOS does not support st_[amc]tim for timestamps
down to nanosecond resolution as POSIX systems.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
6cc6d1b4c6 (Documentation: update add --force option + ignore=all
config, 2026-02-06) added text describing both the ignore=none and
ignore=all behaviors. The former had minor formatting and grammatical
errors, while the latter was a bit garbled. I have tried to tweak the
wording on the latter to make it read as I think was intended, and fixed
the minor grammatical issues with both as well.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
a8215a2051 (send-email: add client certificate options, 2026-03-02)
added documentation for sendemail.smtpSSLClientKey that says it works
"in conjunction with `sendemail.smtpSSLClientKey`" -- referring to
itself. It appears that `sendemail.smtpSSLClientCert` was the intended
reference; fix it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix various issues in the release notes -- missing/wrong articles, typo,
indentation, quote consistency, and wording improvement or corrections.
Other than the indentation fix for "The way combined list-object filter
options...", this patch is much easier to view with --color-words.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As writing version 2 MIDX files by default breaks older versions of
Git and its reimplementations, use V2 only when necessary.
* jk/midx-write-v1-by-default:
MIDX: revert the default version to v1
We introduced midx version 2 in b2ec8e90c2 (midx: do not require packs
to be sorted in lexicographic order, 2026-02-24) and now write it by
default. The rationale was that older versions should ignore the v2 midx
and fall back to using the packs (just like we do for other midx
errors). Unfortunately this is not the case, as we have a hard die()
when we see an unknown midx version.
As a result, writing a midx with Git 2.54-rc2 puts the repository into a
state that is unusable with Git 2.53. And this midx write may happen
behind the scenes as part of normal operations, like fetch.
Let's switch back to writing v1 by default to avoid regressing the case
where multiple versions of Git are used on the same repository.
There is one gotcha, though: the v2 format is required for some new
features, like midx compaction, and running "git multi-pack-index
compact" will complain when asked to write a v1 index. The user must set
midx.version to "2" to make the feature work.
So instead of always using v1, we'll base the default on whether the
requested feature requires v2. That does mean that running midx
compaction will create a repository that can't be read by older versions
of Git. But we never do that by default; only people experimenting with
the new feature will be affected.
We have to adjust the test expectation in t5319, since it will now
generate v1 files. And our "auto-select v2" is covered by the tests in
t5335, which continue to check that compaction works without having to
set midx.version manually (and also explicitly check that asking for v1
with compaction reports the problem).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- correct translation of pathspec msgs
Corrects cases where the “pathspec” is translated as if it was a
path
- correct translation of refspec msgs
Corrects cases where the “refspec” were not consistently translated
- correct translation of credential msgs
Corrects cases where the “credential” were not correctly translated
Signed-off-by: Stefan Björnelund <stefan.bjornelund.gnome@gmail.com>
Modified-by: Peter Krefting <peter@softwolves.pp.se>
Translate 198 previously fuzzy or untranslated messages, bringing the
total number of translated messages to 6226.
Reviewed-by: 依云 <lilydjwg@gmail.com>
Reviewed-by: Fangyi Zhou <me@fangyi.io>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Common Lisp has top-level forms, such as 'defun' and 'defmacro', that
are not matched by the current Scheme pattern. Also, it is more
common in CL, when defining user macros intended as top-level forms,
to prefix their names with "def" instead of "define"; such forms are
also not matched. And some top-level forms don't even begin with
"def".
On the other hand, it is an established formatting convention in the
Lisp community that only top-level forms start at the left margin. So
matching any unindented line starting with an open parenthesis is an
acceptable heuristic; false positives will be rare.
However, there are also cases where notionally top-level forms are
grouped together within some containing form. At least in the Common
Lisp community, it is conventional to indent these by two spaces, or
sometimes one. But matching just an open parenthesis indented by two
spaces would be too broad; so the pattern added by this commit
requires an indented form to start with "(def". It is believed that
this strikes a good balance between potential false positives and
false negatives.
Signed-off-by: Scott L. Burson <Scott@sympoiesis.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The scheme driver separates identifiers only at parentheses of all
sorts and whitespace, except that vertical bars act as brackets that
enclose an identifier.
The test case attempts to demonstrate the vertical bars with a change
from 'some-text' to '|a greeting|'. However, this misses the goal
because the same word coloring would be applied if '|a greeting|'
were parsed as two words.
Have an identifier between vertical bars with a space in both the pre-
and the post-image and change only one side of the space to show that
the single word exists between the vertical bars.
Also add cases that change parentheses of all kinds in a sequence of
parentheses to show that they are their own word each.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Scott L. Burson <Scott@sympoiesis.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The glossary entry is a list of terms and their definitions, so
multi-paragraph definitions need "+" continuation lines to indicate
that they are part of a single entry.
When an entry contains a sub-list (say, a bulleted list), the final "+"
may become ambiguous: is it connecting the next paragraph to the final
entry of the sub-list, or to the original list of definition paragraphs?
Asciidoc generally connects it to the former, even when we mean the
latter, and you end up with the next paragraph indented incorrectly,
like this:
glob
...defines glob...
Two consecutive asterisks ("**") in patterns matched
against full pathname may have special meaning:
- ...some special meaning of **...
- ...another special meaning of **...
- Other consecutive asterisks are considered invalid.
Glob magic is incompatible with literal magic.
That final "Glob magic is incompatible" paragraph is in the wrong spot.
It should be at the same level as "Two consecutive asterisks", as it is
not part of the final "Other consecutive asterisks" bullet point.
The same problem appears in several other spots in the glossary.
Usually we'd fix this by using "--" markers, which put the sub-list into
its own block. But there's a catch: in some of these spots we are
already in an open block, and nesting open blocks is a problem. It seems
to work for me using Asciidoc 10.2.1, but Asciidoctor 2.0.26 makes a
mess of it (our intent to open a new block seems to close the old one).
Fortunately there's a work-around: when using a "+" list-continuation,
the number of empty lines above the continuation indicates which level
of parent list to continue. So by adding an empty line after our
unordered list (before the "+"), we should be able to continue the
definition list item.
But asciidoc being asciidoc, of course that is not the end of the story.
That technique works fine for the "glob" and "attr" lists in this patch,
but under the "refs" item it works for only 1 of the 2 lists! I can't
figure out why, and this may be an asciidoctor bug. But we can work
around it by using "--" open-block markers here, since we're not
already in an open block.
So using the extra blank line for the first two instances, and "--"
markers for the second two, this patch produces identical output from
"doc-diff HEAD^ HEAD" for both --asciidoctor and --asciidoc modes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GitHub Actions started complaining about use of Node.js 20 and I was
wondering why only one job uses actions/checkout@v4, while everybody
else already uses actions/checkout@v5.
It turns out that it is caused by a semantic mismerge between
e75cd059 (ci: check formatting of our Rust code, 2025-10-15) that
added a new use of actions/checkout@v4 that happened very close to
another change 63541ed9 (build(deps): bump actions/checkout from 4
to 5, 2025-10-16) that updated all uses of actions/checkout@v4 to
use vactions/checkout@v5.
Update the leftover and the last use of actions/checkout@v4 to use
actions/checkout@v5 to help ourselves to move away from Node.js 20.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I claimed in 3c18135b (doc: am: say that --message-id adds a trailer,
2026-02-09) that `git am --message-id` adds a Git trailer. But that
isn’t the case; for the case of a commit message with a subject, body,
and no trailer block:
<subject>
<paragrah>
It just appends the line right after `paragraph`:
<subject>
<paragraph>
Message-ID: <message-id_trailer.323@msgid.xyz>
It does work for two other cases though, namely subject-only and with an
existing trailer block.
This is at best an inconsistency and arguably a bug, but we’re at the
trailing end of the release cycle now. So reverting the doc is safer
than making msg-id act as a trailer, for now.
Revert this hunk from commit 3c18135b except the only useful
change (“Also use inline-verbatim for `Message-ID`”).
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used writev() in limited code paths and supplied emulation for
platforms without working writev(), but the emulation was too
faithful to the spec to make the result useless to send even 64kB;
revert the topic and plan to restart the effort later.
* jc/no-writev-does-not-work:
Revert "compat/posix: introduce writev(3p) wrapper"
Revert "wrapper: introduce writev(3p) wrappers"
Revert "sideband: use writev(3p) to send pktlines"
Revert "cmake: use writev(3p) wrapper as needed"
Junio C Hamano