Someone on #git today pointed out that the revision chooser's tooltips
are were being drawn with untranslated strings for the fixed labels we
include, such as "updated", "commit" and "remote". These strings are
now passed through mc to allow them to be localized.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Oddly enough `git ls-files --others` supplies us the name of an
untracked submodule by including the trailing slash but that
same git version will not accept the name with a trailing slash
through `git update-index --stdin`. Stripping off that final
slash character before loading it into our file lists allows
git-gui to stage changes to submodules just like any other file.
This change should give git-gui users some basic submodule support,
but it is strictly at the plumbing level as we do not actually know
about calling the git-submodule porcelain that is a recent addition
to git 1.5.3.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If `git ls-files --others` returned us the name of a directory then
it is because Git has decided that this directory itself contains a
valid Git repository and its files shouldn't be listed as untracked
for this repository.
In such a case we should label the object as a Git repository and
not just as a directory.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui has a minor problem with regards to symlinks that point
to directories.
git init
mkdir realdir
ln -s realdir linkdir
git gui
Now clicking on file names in the "unstaged changes" window,
there's a problem coming from the "linkdir" symlink: git-gui
complains with
error reading "file4": illegal operation on a directory
...even though git-gui can add that same symlink to the index just
fine.
This patch fix this by adding a check.
[sp: Minor fix to use {link} instead of "link" in condition
and to only open the path if it is not a symlink.]
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
git-gui: Avoid use of libdir in Makefile
git-gui: Disable Tk send in all git-gui sessions
git-gui: lib/index.tcl: handle files with % in the filename properly
Dmitry V. Levin pointed out that on GNU linux libdir is often used
in Makefiles to mean "/usr/lib" or "/usr/lib64", a directory that
is meant to hold platform-specific binary files. Using a different
libdir meaning here in git-gui's Makefile breaks idomatic expressions
like rpm specifile "make libdir=%_libdir".
Originally I asked that the git.git Makefile undefine libdir before
it calls git-gui's own Makefile but it turns out this is very hard
to do, if not impossible. Renaming our libdir to gg_libdir resolves
this case with a minimum amount of fuss on our part.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The Tk designers blessed us with the "send" command, which on X11
will allow anyone who can connect to your X server to evaluate any
Tcl code they desire within any running Tk process. This is just
plain nuts. If git-gui wants someone running Tcl code within it
then would ask someone to supply that Tcl code to it; waiting for
someone to drop any random Tcl code into us is not fantastic idea.
By renaming send to the empty name the procedure will be removed
from the global namespace and Tk will stop responding to random Tcl
evaluation requests sent through the X server. Since there is no
facility to filter these requests it is unlikely that we will ever
consider enabling this command.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Steps to reproduce the bug:
$ mkdir repo && cd repo && git init
Initialized empty Git repository in .git/
$ touch 'foo%3Fsuite'
$ git-gui
Then click on the 'foo%3Fsuite' icon to include it in a changeset, a
popup comes with:
'Error: bad field specifier "F"'
Vincent Danjean noticed the problem and also suggested the fix, reported
through
http://bugs.debian.org/441167
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
git-gui: Properly set the state of "Stage/Unstage Hunk" action
git-gui: Fix detaching current branch during checkout
git-gui: Correct starting of git-remote to handle -w option
Conflicts:
git-gui.sh
If we have a failure executing msgfmt (such as the process just
crashes no matter what arguments you supply it because its own
installation is borked) we should stop the build process rather
than letting it continue along its merry way as if the .msg files
were created.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Today I found yet another way for the "Stage Hunk" and "Unstage
Hunk" context menu actions to leave the wrong state enabled in
the UI. The problem this time was that I connected the state
determination to the value of $::current_diff_side (the side the
diff is from). When the user was last looking at a diff from the
index side and unstages everything the diff panel goes empty, but
the action stayed enabled as we always assumed unstaging was a
valid action.
This change moves the logic for determining when the action is
enabled away from the individual side selection, as they really
are two unrelated concepts.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the user tried to detach their HEAD while keeping the working
directory on the same commit we actually did not completely do
a detach operation internally. The problem was caused by git-gui
not forcing the HEAD symbolic ref to be updated to a SHA-1 hash
when we were not switching revisions. Now we update the HEAD ref
if we aren't currently detached or the hashes don't match.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Current versions of git-remote apparently are passing the -w option
to Perl as part of the shbang line:
#!/usr/bin/perl -w
this caused a problem in git-gui and gave the user a Tcl error with
the message: "git-remote not supported: #!/usr/bin/perl -w".
The fix for this is to treat the shbang line as a Tcl list and look
at the first element only for guessing the executable name. Once
we know the executable name we use the remaining elements (if any
exist) as arguments to the executable, before the script filename.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Dots in a UI string usually mean that a dialog box will
appear waiting for further input. So this patch removes
unneeded dots for actions that do not require user's
input.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I really prefer having a very short and sweet makefile output that
does not flood the user's screen with a ton of commands that they
don't care much about. Traditionally git-gui has hidden away the
actual commands from output by the $(QUIET*) series of macros but
allow them to be seen with either `make QUIET=` or `make V=1`.
This change makes our i18n message generation process to be a lot
shorter and easier to digest at a glance:
GITGUI_VERSION = 0.8.2.19.gb868-dirty
* new locations or Tcl/Tk interpreter
GEN git-gui
BUILTIN git-citool
INDEX lib/
MSGFMT po/de.msg 268 translated.
MSGFMT po/hu.msg 268 translated.
MSGFMT po/it.msg 268 translated.
MSGFMT po/ja.msg 268 translated.
MSGFMT po/ru.msg 249 translated, 12 fuzzy, 4 untranslated.
MSGFMT po/zh_cn.msg 60 translated, 37 fuzzy, 168 untranslated.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This particular message is talking about a specific option in the
configuration file named "gui.$name". This option is not localized
so we cannot localize the "gui." that denotes the section the option
$name is found within. Currently there are no plans to localize the
configuration options for git-gui, but if that were to change in the
future then it would be necessary to localize not only the "gui."
section prefix but also the $name (fontui and fontdiff).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We don't actually need to create the lib/msgs symlink back to our
po directory in the source tree. git-gui.sh is smart enough to
figure out this is where the msg files are and will load them from
the po directory if invoked as git-gui.sh.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
with contributions from LI Yang, WANG Cong, ZHANG Le, and rae l
from the zh-kernel.org mailing list.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
[jes: includes patches from Michele Ballabio]
Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
[jes: Also includes work from Junio Hamano]
Signed-off-by: しらいしななこ <nanako3@bluebottle.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This way, it should be easier for new translators to actually find out
about the glossary.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Usually, generated files are not part of the tracked content in
a project. However, translators may lack the tools to generate
git-gui.pot. Besides, it is possible that a contributor does
not even check out the repository, but gets this file via gitweb.
Pointed out by Junio.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This short note is to help a translation contributor to help us
localizing git-gui message files by covering the basics.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[jes: with fixes by the i18n team.]
Signed-off-by: Christian Stimming <stimming@tuhh.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The procedure [mc ...] will translate the strings through msgcat.
Strings must be enclosed in quotes, not in braces, because otherwise
xgettext cannot extract them properly, although on the Tcl side both
delimiters would work fine.
[jes: I merged the later patches to that end.]
Signed-off-by: Christian Stimming <stimming@tuhh.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Tcl's msgcat library and corresponding mc procedure can locate a
translated string for any user message, provided that it is first
given a directory where the *.msg files are located containing the
translations.
During installation we will place the translations in lib/msgs/,
so we need to inform msgcat of this location once we determine it
during startup. Our source code tree however will store all of
the translations within the po/ directory, so we need to special
case this variant.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
To support a localized version of git-gui we need to locate the
library directory early so we can initialize Tcl's msgcat package
to load translated messages from. This needs to occur before we
declare our git-version proc so that errors related to locating
git or assessing its version can be reported to the end-user in
their preferred language. However we have to keep the library
loading until after git-version has been declared, otherwise we
will fail to start git-gui if we are using a fake tclIndex that
was generated by our Makefile.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
David Kastrup pointed out that the following sequence was not
working as we had intended:
$ cd lib
$ git gui blame console.tcl
fatal: cannot stat path lib/console.tcl: No such file or directory
The problem here was we disabled the chdir to the root of the
working tree when we are running with a "bare allowed" feature
such as blame or browser, but we still kept the prefix we found via
`git rev-parse --show-prefix`. This caused us to try and look for
the file "console.tcl" within the subdirectory but also include
the subdirectory's own path from the root of the working tree.
This is unlikely to succeed, unless the user just happened to have
a "lib/lib/console.tcl" file in the repository, in which case we
would produce the wrong result.
In the case of a bare repository we shouldn't get back a value from
`rev-parse --show-prefix`, so really $_prefix should only be set
to the non-empty string if we are in a working tree and we are in a
subdirectory of that working tree. If this is true we really want
to always be at the top level of the working tree, as all paths are
accessed as though they were relative to the top of the working tree.
Converting $_prefix to a ../ sequence is a fairly simple approach
to moving up the requisite levels.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-apply does not accept a patch that was generated as a three-way
combined diff format such as we see during merge conflicts. If we
get such a diff in our diff viewer and try to send it to git-apply
it just errors out and the user is left confused wondering why they
cannot stage that hunk.
Instead of feeding a known to be unacceptable hunk to git-apply we
now just disable the stage/unstage context menu option if the hunk
came from a three way diff. The user may still be confused about
why they cannot work with a combined diff, but at least they are
only confused as to why git-gui is not offering them the action.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The current popup_diff_menu procedure is somewhat messy as it has a
few duplications of the same logic in each of the different legs of
the routine. We can simplify these by setting a few state variables
in the different legs.
No functional change, just a cleanup to make it easier to implement
future functional changes within this block.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the tclsh command was not available to us at the time we were
"built" our lib/tclIndex just lists all of our library files and
we source all of them at once during startup, rather than trying
to lazily load only the procedures we need. This is a problem as
some of our library code now depends upon the git-version proc,
and that proc is not defined until after the library was fully
loaded.
I'm moving the library loading until after we have determined the
version of git we are talking to, as this ensures that the required
git-reversion procedure is defined before any library code can be
loaded. Since error_popup is defined in the library we instead use
tk_messageBox directly for errors found during the version detection.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In a13ee29b97 I totally broke the
"Stage Hunk For Commit" feature by making this menu item always
appear in a disabled state, so it was never invokable. A "teaser
feature", just sitting there taunting the poor user who has become
used to having it available.
The issue caused by a13ee was I added a test to look at the data
in $file_states, but I didn't do that test correctly as it was
always looking at a procedure local $file_states array, which is
not defined, so the test was always true and we always disabled
the menu entry.
Instead we only want to disable the menu entry if the current file
we are looking at has no file state information (git-gui is just a
very confused little process) or it is an untracked file (and we
cannot stage individual hunks).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Earlier when I rewrote the merge implementation for git-gui I broke
it such that the conflict markers for the "theirs" side of the hunk
was using a full SHA-1 ID in hex, rather than the name of the branch
the user had merged. This was because I got paranoid and passed off
the full SHA-1 to git-merge, instead of giving it the reference name
the user saw in the merge dialog.
I'd still like to resolve the SHA-1 upfront in git-gui and always use
that value throughout the merge, but I can't do that until we have a
full implementation of git-merge written in Tcl. Until then its more
important that the conflict markers be useful to the end-user, so we
need to pass off the ref name and not the SHA-1 ID.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
cehteh on #git noticed that secondary windows such as console
windows from push/fetch/merge or the blame browser failed on ion
when we tried to open them a second time.
The issue turned out to be the fact that on ion [winfo ismapped .]
returns false if . is not visible right now because it has been
obscured by another window in the same panel. So we need to keep
track of whether or not the root window has been displayed for this
application, and once it has been we cannot ever assume that ismapped
is going to return true.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
OS X sends Button-2 on a "real" right click, such as with a three
button mouse, or by using the two-finger trackpad click.
Signed-off-by: Väinö Järvelä <v@pp.inet.fi>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If there is no path currently shown in the diff viewer then we
were getting Tcl errors anytime the user right-clicked on the
diff viewer to bring up its popup menu. The bug here is caused
by trying to get the file_state for the empty string; this path
is never seen so we never have file_state for it. In such cases
we now disable the Stage Hunk For Commit option.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This is just a small code movement to cleanup how we generate
the command line for a merge. I'm only doing it to make the
next series of changes slightly more readable.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This is a replacement of all of the icons in our tree browser
window, as the prior icons just looked too 1980s Tk-ish. The
icons used here are actually from a KDE themed look, so they
might actually be familiar to some users of git-gui.
Aside from using more modern looking icons we now have a special
icon for executable blobs, to make them stand out from the normal
non-executable blobs. We also denote symlinks now with a different
icon, so they stand out from the other types of objects in the tree.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the user looks at an untracked file in our diff pane we used
to offer "Stage Hunk For Commit" in the context menu when they
right-clicked in that pane. The problem is we don't actually
have any diff hunks in untracked files, so there is nothing to
really select for staging. So we now grey out the menu item,
so the user cannot invoke it and think its broken when it does
not perform any useful action.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we are started for only a blame/browser/citool run we don't
usually initialize the list of remotes, or determine which refs
are tracking branches and which are local branch heads. This is
because some of that work is relatively expensive and is usually
not going to be needed if we are started only for a blame, or to
make a single commit.
However by not loading the remote configuration we were crashing
if the user tried to open a browser for another branch through
the Repository menu, as our load_all_heads procedure was unable
to decide which refs/heads/ items were actually local heads. We
now force all remote configuration data to be loaded if we have
not done so already and we are trying to create a revision mega
widget.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Resetting a large number of files on a slow filesystem can take
considerable time, just as switching branches in such a case can
take more than two seconds. We now take advantage of the progress
meter output by read-tree and show it in the main window status
bar, just like we do during checkout (branch switch).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce