The framework to create lockfiles that are removed at exit is
first used to reliably write the index file, but it is
applicable to other things, so stop calling it "cache_file".
This also rewords a few remaining error message that called the
index file "cache file".
Signed-off-by: Junio C Hamano <junkio@cox.net>
Anton Blanchard spotted that watching checkout stage of a clone
on a slow terminal takes ages because it forgot to clear the
"once a second happened" flag, so instead of updates the
percentage output for every file it checks out after the first
second has passed.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The earlier "git reset --hard" simplification stopped removing
leftover working tree files from a failed automerge, when
switching back to the HEAD version that does not have the
paths.
This patch, instead of removing the unmerged paths from the
index, drops them down to stage#0 but marks them with mode=0
(the same "to be deleted" marker we internally use for paths
deleted by the merge). one_way_merge() function and the
functions it calls already know what to do with them -- if the
tree we are reading has the path the working tree file is
overwritten, and if it doesn't the working tree file is
removed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a "tree_entry()" function that combines the common operation of
doing a "tree_entry_extract()" + "update_tree_entry()".
It also has a simplified calling convention, designed for simple loops
that traverse over a whole tree: the arguments are pointers to the tree
descriptor and a name_entry structure to fill in, and it returns a boolean
"true" if there was an entry left to be gotten in the tree.
This allows tree traversal with
struct tree_desc desc;
struct name_entry entry;
desc.buf = tree->buffer;
desc.size = tree->size;
while (tree_entry(&desc, &entry) {
... use "entry.{path, sha1, mode, pathlen}" ...
}
which is not only shorter than writing it out in full, it's hopefully less
error prone too.
[ It's actually a tad faster too - we don't need to recalculate the entry
pathlength in both extract and update, but need to do it only once.
Also, some callers can avoid doing a "strlen()" on the result, since
it's returned as part of the name_entry structure.
However, by now we're talking just 1% speedup on "git-rev-list --objects
--all", and we're definitely at the point where tree walking is no
longer the issue any more. ]
NOTE! Not everybody wants to use this new helper function, since some of
the tree walkers very much on purpose do the descriptor update separately
from the entry extraction. So the "extract + update" sequence still
remains as the core sequence, this is just a simplified interface.
We should probably add a silly two-line inline helper function for
initializing the descriptor from the "struct tree" too, just to cut down
on the noise from that common "desc" initializer.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The old tree_entry_list is dead, long live the unified single tree
parser.
Yes, we now still have a compatibility function to create a bogus
tree_entry_list in builtin-read-tree.c, but that is now entirely local
to that very messy piece of code.
I'd love to clean read-tree.c up too, but I'm too scared right now, so
the best I can do is to just contain the damage, and try to make sure
that no new users of the tree_entry_list sprout up by not having it as
an exported interface any more.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead, just use the tree buffer directly, and use the tree-walk
infrastructure to walk the buffers instead of the tree-entry list.
The tree-entry list is inefficient, and generates tons of small
allocations for no good reason. The tree-walk infrastructure is
generally no harder to use than following a linked list, and allows
us to do most tree parsing in-place.
Some programs still use the old tree-entry lists, and are a bit
painful to convert without major surgery. For them we have a helper
function that creates a temporary tree-entry list on demand.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is preparatory work for further cleanups, where we try to make
tree_entry look more like the more efficient tree-walk descriptor.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows us to avoid allocating information for names etc, because
we can just use the information from the tree buffer directly.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This finally removes the tree-entry list from "struct tree", since most of
the users can just use the tree-walk infrastructure to walk the raw tree
buffers instead of the tree-entry list.
The tree-entry list is inefficient, and generates tons of small
allocations for no good reason. The tree-walk infrastructure is generally
no harder to use than following a linked list, and allows us to do most
tree parsing in-place.
Some programs still use the old tree-entry lists, and are a bit painful to
convert without major surgery. For them we have a helper function that
creates a temporary tree-entry list on demand. We can convert those too
eventually, but with this they no longer affect any users who don't need
the explicit lists.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is preparatory work for further cleanups, where we try to make
tree_entry look more like the more efficient tree-walk descriptor.
Instead of having a union of pointers to blob/tree/objects, this just
makes "struct tree_entry" have the raw SHA1, and makes all the users use
that instead (often that implies adding a "lookup_tree(..)" on the sha1,
but sometimes the user just wanted the SHA1 in the first place, and it
just avoids an unnecessary indirection).
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows us to avoid allocating information for names etc, because
we can just use the information from the tree buffer directly.
We still keep the old "tree_entry_list" in struct tree as well, so old
users aren't affected, apart from the fact that the allocations are
different (if you free a tree entry, you should no longer free the name
allocation for it, since it's allocated as part of "tree->buffer")
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When a merge results in a creation of a path that did not exist
in HEAD, and if you already have that path on the working tree,
because the index has not been told about the working tree file,
read-tree happily removes it. The issue was brought up by Santi
Béjar on the list.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The previous commit makes -u to mean "I do want to remove the
local changes, just update it from the read tree" only for
one-way merge. It makes sense to have it depend on the
"--reset" flag instead.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The "-u" flag means "update the working tree files", but to
other types of merges, it also implies "I want to keep my local
changes" -- because they prevent local changes from getting lost
by using verify_uptodate. The one-way merge is different from
other merges in that its purpose is opposite of doing something
else while keeping unrelated local changes. The point of
one-way merge is to nuke local changes. So while it feels
somewhat wrong that this actively loses local changes, it is the
right thing to do.
Signed-off-by: Junio C Hamano <junkio@cox.net>
For some random reason (probably just because nobody noticed), the one-way
merge strategy didn't mark deleted files as deleted, so if you used
git-read-tree -m -u <newtree>
it would update the files that got changed in the index, but it would not
delete the files that got deleted.
This should fix it, and I can't imagine that anybody depends on the old
strange "update only existing files" behaviour.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
cvsimport needs to call git-read-tree without arguments to create an empty
tree.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When doing two-way merge, we failed to invalidate the directory
that a new entry is added (we correctly did so for modified and
deleted entries).
Signed-off-by: Junio C Hamano <junkio@cox.net>
This teaches read-tree to fully populate valid cache-tree when
reading a tree from scratch, or reading a single tree into an
existing index, reusing only the cached stat information (i.e.
one-way merge). We have already taught update-index about cache-tree,
so "git checkout" followed by updates to a few path followed by
a "git commit" would become very efficient.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This teaches one-way and two-way "read-tree -m" (and its special
form, "read-tree --reset" as well) not to discard cache-tree but
invalidate only the changed parts of the tree. When switching
between related branches, this helps the eventual commit
(i.e. write-tree) by keeping cache-tree valid as much as
possible.
This does not prime cache-tree yet, but we ought to be able to
do that for no-merge (i.e. reading from a tree object) case and,
and also perhaps 1 way merge case.
With this patch applied, switching between the tip of Linux 2.6
kernel tree and a branch that touches one path (fs/ext3/Makefile)
from it invalidates only 3 paths out of 1201 cache-tree entries
in the index, and subsequent write-tree takes about a half as
much time as before.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Might as well ape the sigaction change in read-tree.c to avoid
the same potential problems. The fprintf status output will
be overwritten in a second, so don't bother guarding it. Do
move the fputc after disabling SIGALRM to ensure we go to the
next line, though.
Also add a NO_SA_RESTART option in the Makefile in case someone
doesn't have SA_RESTART but does restart (maybe older HP/UX?).
We want the builder to chose this specifically in case the
system both lacks SA_RESTART and does not restart stdio calls;
a compat #define in git-compat-utils.h would silently allow
broken systems.
Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes sure that many commands that take refs on the command
line to honor core.warnambiguousrefs configuration. Earlier,
the commands affected by this patch did not read the
configuration file.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Sometimes it is convient for a Porcelain to be able to checkout all
unmerged files in all stages so that an external merge tool can be
executed by the Porcelain or the end-user. Using git-unpack-file
on each stage individually incurs a rather high penalty due to the
need to fork for each file version obtained. git-checkout-index -a
--stage=all will now do the same thing, but faster.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When both heads deleted, or our side deleted while the other
side did not touch, we did not have to update the working tree.
However, we forgot to remove existing working tree file when we
did not touch and the other side did.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This implements "eye candy" similar to the pack-object/unpack-object
to entertain users while a large tree is being checked out after
a clone or a pull.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds "assume unchanged" logic, started by this message in the list
discussion recently:
<Pine.LNX.4.64.0601311807470.7301@g5.osdl.org>
This is a workaround for filesystems that do not have lstat()
that is quick enough for the index mechanism to take advantage
of. On the paths marked as "assumed to be unchanged", the user
needs to explicitly use update-index to register the object name
to be in the next commit.
You can use two new options to update-index to set and reset the
CE_VALID bit:
git-update-index --assume-unchanged path...
git-update-index --no-assume-unchanged path...
These forms manipulate only the CE_VALID bit; it does not change
the object name recorded in the index file. Nor they add a new
entry to the index.
When the configuration variable "core.ignorestat = true" is set,
the index entries are marked with CE_VALID bit automatically
after:
- update-index to explicitly register the current object name to the
index file.
- when update-index --refresh finds the path to be up-to-date.
- when tools like read-tree -u and apply --index update the working
tree file and register the current object name to the index file.
The flag is dropped upon read-tree that does not check out the index
entry. This happens regardless of the core.ignorestat settings.
Index entries marked with CE_VALID bit are assumed to be
unchanged most of the time. However, there are cases that
CE_VALID bit is ignored for the sake of safety and usability:
- while "git-read-tree -m" or git-apply need to make sure
that the paths involved in the merge do not have local
modifications. This sacrifices performance for safety.
- when git-checkout-index -f -q -u -a tries to see if it needs
to checkout the paths. Otherwise you can never check
anything out ;-).
- when git-update-index --really-refresh (a new flag) tries to
see if the index entry is up to date. You can start with
everything marked as CE_VALID and run this once to drop
CE_VALID bit for paths that are modified.
Most notably, "update-index --refresh" honours CE_VALID and does
not actively stat, so after you modified a file in the working
tree, update-index --refresh would not notice until you tell the
index about it with "git-update-index path" or "git-update-index
--no-assume-unchanged path".
This version is not expected to be perfect. I think diff
between index and/or tree and working files may need some
adjustment, and there probably needs other cases we should
automatically unmark paths that are marked to be CE_VALID.
But the basics seem to work, and ready to be tested by people
who asked for this feature.
Signed-off-by: Junio C Hamano <junkio@cox.net>
A new flag --aggressive resolves what we traditionally resolved
with external git-merge-one-file inside index while read-tree
3-way merge works.
git-merge-octopus and git-merge-resolve use this flag before
running git-merge-index with git-merge-one-file.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Avoid asking for zero bytes when that change simplifies overall
logic. Later we would change the wrapper to ask for 1 byte on
platforms that return NULL for zero byte request.
Signed-off-by: Junio C Hamano <junkio@cox.net>
These commands are converted to run from a subdirectory.
commit-tree convert-objects merge-base merge-index mktag
pack-objects pack-redundant prune-packed read-tree tar-tree
unpack-file unpack-objects update-server-info write-tree
Signed-off-by: Junio C Hamano <junkio@cox.net>
ls-files.c and read-tree.c miss the default configuration, in
particular the filemode=false part. The recent +x bit flip made me
notice that, because git-merge refused to merge anything saying that
git-pull.sh is not up to date.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fixes everybody's favorite gripe that switching branche with
'git checkout' leaves empty directories.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds an option --trivial to restrict 3-way 'read-tree -m -u'
to happen only if there is no file-level merging required.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Initially it was to allow specifying more than one remote to
allow creation of an Octopus, but it is not being used.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Somehow I missed it when we updated read-tree to support the recursive
merge strategy. Also -i should require -m as well, which the command
did not check.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We wanted to detect case #16 which should be rare, but botched the
case when some paths are missing, causing a segfault. My fault.
Signed-off-by: Junio C Hamano <junkio@cox.net>
I really wanted to try this out, instead of asking for an adjustment
to the 'git merge' driver and waiting. For now the new strategy is
called 'fredrik' and not in the list of default strategies to be tried.
The script wants Python 2.4 so this commit also adjusts Debian and RPM
build procecure files.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This will help us detect if real-world example merges have multiple
merge-base candidates and one of them matches one head while another
matches the other head.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Adds support for multiple ancestors, removes --emu23, much simplification.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
All usage strings are now declared as static const char [].
This is carried over from my old git-pb branch.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano