To some cpio's, -a and -m options are mutually exclusive. Use only -m.
Signed-off-by: Johannes E. Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We run svn log against a URL without a working copy for the first fetch,
so we end up a log that's sorted from highest to lowest. That's bad, we
always want lowest to highest. Just default to --revision 0:HEAD now if
-r isn't specified for the first fetch.
Also sort the revisions after we get them just in case somebody
accidentally reverses the argument to --revision for whatever reason.
Thanks again to Emmanuel Guerin for helping me find this.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Systems using some uClibc versions do not properly support
iconv stuff. This patch allows Git to be built on those
systems by passing NO_ICONV=YesPlease to make. The only
drawback is mailinfo won't do charset conversion in those
systems.
Signed-off-by: Fernando J. Pereda <ferdy@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If Git is compiled with NO_CURL=YesPlease and one tries to
clone a http repository, git-clone tries to call the curl
binary. This trivial patch prints an error instead in such
situation.
Signed-off-by: Fernando J. Pereda <ferdy@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is in the same spirit as an earlier patch for git-commit.
It does an extra ls-files to avoid complaining when a fully
tracked directory name is given on the command line (otherwise
--others restriction would say the pathspec does not match).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier patch mistakenly used prefix_len when it meant
prefix_offset. The latter is to strip the leading directories
when run from a subdirectory.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When we refused to switch branches, we incorrectly showed
differences from the branch we would have switched to.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When you say "git commit Documentaiton" to make partial commit
for the files only in that directory, we did not detect that as
a misspelled pathname and attempted to commit index without
change. If nothing matched, there is no harm done, but if the
index gets modified otherwise by having another valid pathspec
or after an explicit update-index, a user will not notice
without paying attention to the "git status" preview.
This introduces --error-unmatch option to ls-files, and uses it
to detect this common user error.
Signed-off-by: Junio C Hamano <junkio@cox.net>
New -r flag for prepending the corresponding Subversion revision
number to each commit message.
Signed-off-by: Karl Hasselström <kha@treskal.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The raw format "git-diff-files -c" to show unmerged state forgot
to initialize the status fields from parents, causing NUL
characters to be emitted.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When showing a conflicted merge from index stages and working
tree file, we did not fetch the mode from the working tree,
and mistook that as a deleted file. Also if the manual
resolution (or automated resolution by git rerere) ended up
taking either parent's version, we did not show _anything_ for
that path. Either was quite bad and confusing.
Signed-off-by: Junio C Hamano <junkio@cox.net>
With the current Makefile we don't use the shell chosen by the
platform specific defines when we invoke GIT-VERSION-GEN.
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I noticed that we forgot to clean this file and kept it that
way, while trying to help with Andrew's bisect problem.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since Junio used this in an example, and I've personally tried to use it, I
suppose the option should actually exist.
Signed-off-by: Ryan Anderson <ryan@michonline.com>
The documentation was mistakenly describing the --only semantics to
be default. The 1.2.0 release and its maintenance series 1.2.X will
keep the traditional --include semantics as the default. Clarify the
situation.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This lets a hook to interfere a rebase and help prevent certain
branches from being rebased by mistake. A sample hook to show
how to prevent a topic branch that has already been merged into
publish branch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes the "git commit paths..." to default to --only
semantics from traditional --include semantics, as agreed on the
list.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-bisect reset without an argument would return to master even
if the bisecting started at a non-master branch. This patch makes
it save the original branch name to .git/head-name and restore it
afterwards.
This is also compatible with Cogito and cg-seek, so cg-status will
show that we are seeked on the bisect branch and cg-reset will
properly restore the original branch.
git-bisect start will refuse to work if it is not on a bisect but
.git/head-name exists; this is to protect against conflicts with
other seeking tools.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier, when we switched a branch we used diff-files to show
paths that are dirty in the working tree. But we allow switching
branches with updated index ("read-tree -m -u $old $new" works that
way), and only showing paths that have differences in the working
tree but not paths that are different in index was confusing.
This shows both as modified from the top commit of the branch we
just have switched to.
Signed-off-by: Junio C Hamano <junkio@cox.net>
You could give -q to squelch it, but currently no tool does it.
This would make 'git clone host:repo here' over ssh not silent
again.
Signed-off-by: Junio C Hamano <junkio@cox.net>
FreeBSD 4.11 being one example: the built-in echo doesn't have -e,
and the installed /bin/echo does not do "-e" as well.
"printf" works, laking just "\e" and "\xAB'.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The hashed object lookup had a subtle bug in re-hashing: it did
for (i = 0; i < count; i++)
if (objs[i]) {
.. rehash ..
where "count" was the old hash couny. Oon the face of it is obvious, since
it clearly re-hashes all the old objects.
However, it's wrong.
If the last old hash entry before re-hashing was in use (or became in use
by the re-hashing), then when re-hashing could have inserted an object
into the hash entries with idx >= count due to overflow. When we then
rehash the last old entry, that old entry might become empty, which means
that the overflow entries should be re-hashed again.
In other words, the loop has to be fixed to either traverse the whole
array, rather than just the old count.
(There's room for a slight optimization: instead of counting all the way
up, we can break when we see the first empty slot that is above the old
"count". At that point we know we don't have any collissions that we might
have to fix up any more. This patch only does the trivial fix)
[jc: with trivial fix on trivial fix]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Calling hashtable_index from find_object before objs is created
would result in division by zero failure. Avoid it.
Also the given object name may not be aligned suitably for
unsigned int; avoid dereferencing casted pointer.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In a simple test, this brings down the CPU time from 47 sec to 22 sec.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This howto consists of a footnote from an email by JC to the git
mailing list (<7vfyms0x4p.fsf@assigned-by-dhcp.cox.net>).
Signed-off-by: Kent Engstrom <kent@lysator.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is to be nicer to people with unusable GECOS field.
"git-var -l" is currently broken in that when used by a user who
does not have a usable GECOS field and has not corrected it by
exporting GIT_COMMITTER_NAME environment variable it dies when
it tries to output GIT_COMMITTER_IDENT (same thing for AUTHOR).
"git-pull" used "git-var -l" only because it needed to get a
configuration variable before "git-repo-config --get" was
introduced. Use the latter tool designed exactly for this
purpose.
"git-sh-setup" used "git-var GIT_AUTHOR_IDENT" without actually
wanting to use its value. The only purpose was to cause the
command to check and barf if the repository format version
recorded in the $GIT_DIR/config file is too new for us to deal
with correctly. Instead, use "repo-config --get" on a random
property and see if it die()s, and check if the exit status is
128 (comes from die -- missing variable is reported with exit
status 1, so we can tell that case apart).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Johannes Schindelin