SZEDER reported that t5411 failed in Travis CI's s390x environment a
couple of times, and could be reproduced with '--stress' test on this
specific environment. The test failure messages might look like this:
+ test_cmp expect actual
--- expect 2021-01-17 21:55:23.430750004 +0000
+++ actual 2021-01-17 21:55:23.430750004 +0000
@@ -1 +1 @@
-<COMMIT-A> refs/heads/main
+<COMMIT-A> refs/heads/maifatal: the remote end hung up unexpectedly
error: last command exited with $?=1
not ok 86 - proc-receive: not support push options (builtin protocol)
The file 'actual' is filtered from the file 'out' which contains result
of 'git show-ref' command. Due to the error messages from other process
is written into the file 'out' accidentally, t5411 failed. SZEDER finds
the root cause of this issue:
- 'git push' is executed with its standard output and error redirected
to the file 'out'.
- 'git push' executes 'git receive-pack' internally, which inherits
the open file descriptors, so its output and error goes into that
same 'out' file.
- 'git push' ends without waiting for the close of 'git-receive-pack'
for some cases, and the file 'out' is reused for test of
'git show-ref' afterwards.
- A mixture of the output of 'git show-ref' abd 'git receive-pack'
leads to this issue.
The first intuitive reaction to resolve this issue is to remove the
file 'out' after use, so that the newly created file 'out' will have a
different file descriptor and will not be overwritten by the
'git receive-pack' process. But Johannes pointed out that removing an
open file is not possible on Windows. So we use different temporary
file names to store the output of 'git push' to solve this issue.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hotfix for a topic of this cycle.
* ma/maintenance-crontab-fix:
t7900-maintenance: test for magic markers
gc: fix handling of crontab magic markers
git-maintenance.txt: add missing word
Test coverage fix.
* js/no-more-prepare-for-main-in-test:
tests: drop the `PREPARE_FOR_MAIN_BRANCH` prereq
t9902: use `main` as initial branch name
t6302: use `main` as initial branch name
t5703: use `main` as initial branch name
t5510: use `main` as initial branch name
t5505: finalize transitioning to using the branch name `main`
t3205: finalize transitioning to using the branch name `main`
t3203: complete the transition to using the branch name `main`
t3201: finalize transitioning to using the branch name `main`
t3200: finish transitioning to the initial branch name `main`
t1400: use `main` as initial branch name
"git pack-redandant" when there is only one packfile used to crash,
which has been corrected.
* jx/pack-redundant-on-single-pack:
pack-redundant: fix crash when one packfile in repo
The 'linkgit' Asciidoc macro is misspelled as 'linkit' in the
description of 'GIT_SEQUENCE_EDITOR' since the addition of that variable
to git(1) in 902a126eca (doc: mention GIT_SEQUENCE_EDITOR and
'sequence.editor' more, 2020-08-31). Also, it uses two colons instead of
one.
Fix that.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Comment did not adequately explain how the two loops work
together to achieve the goal of querying for matching of any
negative refspec.
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic added to check for negative pathspec match by c0192df630
(refspec: add support for negative refspecs, 2020-09-30) looks at
refspec->src assuming it is never NULL, however when
remote.origin.push is set to ":", then refspec->src is NULL,
causing a segfault within strcmp.
Tell git to handle matching refspec by adding the needle to the
set of positively matched refspecs, since matching ":" refspecs
match anything as src.
Add test for matching refspec pushes fetch-negative-refspec
both individually and in combination with a negative refspec.
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we insert our "BEGIN" and "END" markers into the cron table, it's
so that a Git version from many years into the future would be able to
identify this region in the cron table. Let's add a test to make sure
that these markers don't ever change.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On `git maintenance start`, we add a few entries to the user's cron
table. We wrap our entries using two magic markers, "# BEGIN GIT
MAINTENANCE SCHEDULE" and "# END GIT MAINTENANCE SCHEDULE". At a later
`git maintenance stop`, we will go through the table and remove these
lines. Or rather, we will remove the "BEGIN" marker, the "END" marker
and everything between them.
Alas, we have a bug in how we detect the "END" marker: we don't. As we
loop through all the lines of the crontab, if we are in the "old
region", i.e., the region we're aiming to remove, we make an early
`continue` and don't get as far as checking for the "END" marker. Thus,
once we've seen our "BEGIN", we remove everything until the end of the
file.
Rewrite the logic for identifying these markers. There are four cases
that are mutually exclusive: The current line starts a region or it ends
it, or it's firmly within the region, or it's outside of it (and should
be printed).
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a missing "a" before "bunch".
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a segmentation fault.
The bug is caused by dereferencing `new_branch_info->commit` when it is
`NULL`, which is the case when the tree-ish argument is actually a tree,
not a commit-ish. This was introduced in 5602b500c3 (builtin/checkout:
fix `git checkout -p HEAD...` bug, 2020-10-07), where we tried to ensure
that the special tree-ish `HEAD...` is handled correctly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* github/master: (42 commits)
Git 2.30-rc1
git-gui: use gray background for inactive text widgets
Another batch before 2.30-rc1
git-gui: Fix selected text colors
Makefile: conditionally include GIT-VERSION-FILE
git-gui: fix colored label backgrounds when using themed widgets
config.mak.uname: remove old NonStop compatibility settings
diff: correct interaction between --exit-code and -I<pattern>
t/perf: fix test_export() failure with BSD `sed`
style: do not "break" in switch() after "return"
compat-util: pretend that stub setitimer() always succeeds
strmap: make callers of strmap_remove() to call it in void context
doc: mention Python 3.x supports
index-format.txt: document v2 format of file system monitor extension
docs: multi-pack-index: remove note about future 'verify' work
init: provide useful advice about init.defaultBranch
get_default_branch_name(): prepare for showing some advice
branch -m: allow renaming a yet-unborn branch
init: document `init.defaultBranch` better
t7900: use --fixed-value in git-maintenance tests
...
"git diff -I<pattern> -exit-code" should exit with 0 status when
all the changes match the ignored pattern, but it didn't.
* jc/diff-I-status-fix:
diff: correct interaction between --exit-code and -I<pattern>
Our users are going to be trained to prepare for future change of
init.defaultBranch configuration variable.
* js/init-defaultbranch-advice:
init: provide useful advice about init.defaultBranch
get_default_branch_name(): prepare for showing some advice
branch -m: allow renaming a yet-unborn branch
init: document `init.defaultBranch` better
* https://github.com/prati0100/git-gui:
git-gui: use gray background for inactive text widgets
git-gui: Fix selected text colors
Makefile: conditionally include GIT-VERSION-FILE
git-gui: fix colored label backgrounds when using themed widgets
git-gui: ssh-askpass: add a checkbox to show the input text
git-gui: update Russian translation
git-gui: use commit message template
git-gui: Only touch GITGUI_MSG when needed
Set a different background color for selections in inactive widgets.
This inactive color is calculated from the current theme colors to make
sure it works for all themes.
* sh/inactive-background:
git-gui: use gray background for inactive text widgets
This makes it easier to see at a glance which of the four main views has the
keyboard focus.
Signed-off-by: Stefan Haller <stefan@haller-berlin.de>
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
Build optimization.
* rj/make-clean:
Makefile: don't use a versioned temp distribution directory
Makefile: don't try to clean old debian build product
gitweb/Makefile: conditionally include ../GIT-VERSION-FILE
Documentation/Makefile: conditionally include ../GIT-VERSION-FILE
Documentation/Makefile: conditionally include doc.dep
Jiang Xin