Stop using `the_repository` in `verify_filename()` and instead accept
the repository as a parameter. The injection of `the_repository` is thus
bumped one level higher, where callers now pass it in explicitly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop using `the_repository` in `path_inside_repo()` and instead accept
the repository as a parameter. The injection of `the_repository` is thus
bumped one level higher, where callers now pass it in explicitly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop using `the_repository` in `prefix_path()` and instead accept the
repository as a parameter. The injection of `the_repository` is thus
bumped one level higher, where callers now pass it in explicitly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar as with the preceding commit, `is_inside_work_tree()` determines
whether the current working directory is located inside the worktree of
`the_repository`. Perform the same refactoring by dropping the caching
mechanism and injecting the repository that shall be checked.
Note that, same as in the preceding commit, we're also resolving the
worktree path via `realpath()`. In theory this step is not necessary as
we always set the worktree path via `repo_set_worktree()`, and that
function already resolves the path for us. But resolving the path a
second time is unlikely to matter performance-wise, and it feels fragile
to rely on the repository's worktree path being absolute. We thus
perform the same extra step even though it's ultimately not required.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function `is_inside_git_dir()` verifies whether or not the current
working directory is located inside the gitdir of `the_repository`. This
is done by taking the gitdir path and verifying that it's a prefix of
the current working directory.
This information is cached so that we don't have to re-do this change
multiple times. Furthermore, we proactively set the value in multiple
locations so that we don't even have to perform the check when we have
discovered the repository.
While we could simply move the caching variable into the repository, the
current layout doesn't really feel sensible in the first place:
- It can easily lead to false positives or negatives if at any point
in time we may switch the current working directory.
- We don't call the function in a hot loop, and neither is it overly
expensive to compute.
Drop the caching infrastructure and instead compute the property ad-hoc
via an injected repository.
Note that there is one small gotcha: we often end up with relative
gitdir paths, and if so `is_inside_dir()` might fail. This wasn't an
issue before because of how we proactively set the cached value during
repository discovery. Now that we stop doing that it becomes a problem
though, which we work around by resolving the gitdir via `realpath()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the use of `the_repository` in "setup.c" for all static
functions. For now, we simply add `the_repository` to invocations of
these functions. This will be addressed in subsequent commits, where
we'll move up `the_repository` one more layer to callers of "setup.c".
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout -m another-branch" was invented to deal with local
changes to paths that are different between the current and the new
branch, but it gave only one chance to resolve conflicts. The command
was taught to create a stash to save the local changes.
* hn/git-checkout-m-with-stash:
checkout -m: autostash when switching branches
checkout: rollback lock on early returns in merge_working_tree
sequencer: teach autostash apply to take optional conflict marker labels
sequencer: allow create_autostash to run silently
stash: add --label-ours, --label-theirs, --label-base for apply
Test clean-up.
* ss/t7004-unhide-git-failures:
t7004: avoid subshells to capture git exit codes
t7004: dynamically grab expected state in tests
t7004: drop hardcoded tag count for state verification
The 'git backfill' command now rejects revision-limiting options that
are incompatible with its operation, uses standard documentation for
revision ranges, and includes blobs from boundary commits by default
to improve performance of subsequent operations.
* en/backfill-fixes-and-edges:
backfill: default to grabbing edge blobs too
backfill: document acceptance of revision-range in more standard manner
backfill: reject rev-list arguments that do not make sense
Headers from glibc 2.43 when used with clang does not allow
disabling C11 language features, causing build failures..
* ps/clang-w-glibc-2.43-and-_Generic:
build: tolerate use of _Generic from glibc 2.43 with Clang
To help Windows 10 installations, avoid removing files whose
contents are still mmap()'ed.
* js/maintenance-fix-deadlock-on-win10:
maintenance(geometric): do release the `.idx` files before repacking
mingw: optionally use legacy (non-POSIX) delete semantics
Avoid hitting the pathname limit for socks proxy socket during the
test..
* js/t5564-socks-use-short-path:
t5564: use a short path for the SOCKS proxy socket
Update various GitHub Actions versions.
* js/ci-github-actions-update:
l10n: bump mshick/add-pr-comment from v2 to v3
ci: bump git-for-windows/setup-git-for-windows-sdk from v1 to v2
ci: bump actions/checkout from v5 to v6
ci: bump actions/github-script from v8 to v9
ci: bump actions/{upload,download}-artifact to v7 and v8
ci: bump microsoft/setup-msbuild from v2 to v3
Revert a recent change that introduced a regression to help mksh users.
* jk/revert-aa-reap-transport-child-processes:
Revert "transport-helper, connect: use clean_on_exit to reap children on abnormal exit"
When building with `make DEVELOPER=1` we explicitly pass "-std=gnu99" to
the compiler so that we don't start leaning on features exposed by more
recent versions of the C standard. Unfortunately though, glibc 2.43
started to use type-generic expressions. This works alright with GCC,
but when compiling with Clang this leads to errors:
$ make DEVELOPER=1 CC=clang
CC daemon.o
In file included from daemon.c:3:
./git-compat-util.h:344:11: error: '_Generic' is a C11 extension [-Werror,-Wc11-extensions]
344 | return !!strchr(path, '/');
| ^
/usr/include/string.h:265:3: note: expanded from macro 'strchr'
265 | __glibc_const_generic (S, const char *, strchr (S, C))
| ^
/usr/include/x86_64-linux-gnu/sys/cdefs.h:838:3: note: expanded from macro '__glibc_const_generic'
838 | _Generic (0 ? (PTR) : (void *) 1, \
| ^
In theory, the `__glibc_const_generic` macro does have feature gating:
#if !defined __cplusplus \
&& (__GNUC_PREREQ (4, 9) \
|| __glibc_has_extension (c_generic_selections) \
|| (!defined __GNUC__ && defined __STDC_VERSION__ \
&& __STDC_VERSION__ >= 201112L))
# define __HAVE_GENERIC_SELECTION 1
#else
# define __HAVE_GENERIC_SELECTION 0
#endif
But this feature gating isn't effective because `_has_extension()` will
always evaluate to true as C generics _are_ available as a language
extension to GNU C99 when using Clang. This would have been different if
`_has_feature()` was used instead, in which case it would have properly
evaluated to `false`.
GCC has a workaround to squelch this warning from standard system
headers, but because clang fails due to [-Werror,-Wc11-extensions],
as it lacks the corresponding workaround.
For both meson and Makefile, pass -Wno-c11-extensions when we are
building with clang.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Helped-by: Shardul Natu <snatu@google.com>
[jc: replaced Makefile side with Shardul's approach]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Try to resurrect and reboot a stalled "avoid sending risky escape
sequences taken from sideband to the terminal" topic by Dscho. The
plan is to keep it in 'next' long enough to see if anybody screams
with the "everything dropped except for ANSI color escape sequences"
default.
* jc/neuter-sideband-fixup:
sideband: drop 'default' configuration
sideband: offer to configure sanitizing on a per-URL basis
sideband: add options to allow more control sequences to be passed through
sideband: do allow ANSI color sequences by default
sideband: introduce an "escape hatch" to allow control characters
sideband: mask control characters
The test suite harness and many individual test scripts have been
updated to work correctly when 'set -e' is in effect, which helps
detect misspelled test commands.
* ps/test-set-e-clean:
t: detect errors outside of test cases
t9902: fix use of `read` with `set -e`
t6002: fix use of `expr` with `set -e`
t1301: don't fail in case setfacl(1) doesn't exist or fails
t0008: silence error in subshell when using `grep -v`
t: prepare `test_when_finished ()`/`test_atexit()` for `set -e`
t: prepare execution of potentially failing commands for `set -e`
t: prepare conditional test execution for `set -e`
t: prepare `git config --unset` calls for `set -e`
t: prepare `stop_git_daemon ()` for `set -e`
t: prepare `test_must_fail ()` for `set -e`
t: prepare `test_match_signal ()` calls for `set -e`
Rust support is enabled by default (but still allows opting out) in
some future version of Git.
* bc/rust-by-default:
Enable Rust by default
Linux: link against libdl
ci: install cargo on Alpine
docs: update version with default Rust support
The userdiff driver for the Scheme language has been extended to
cover other Lisp dialects.
* sb/userdiff-lisp-family:
userdiff: extend Scheme support to cover other Lisp dialects
userdiff: tighten word-diff test case of the scheme driver
Hook scripts defined via the configuration system can now be
configured to run in parallel.
* ar/parallel-hooks:
t1800: test SIGPIPE with parallel hooks
hook: allow hook.jobs=-1 to use all available CPU cores
hook: add hook.<event>.enabled switch
hook: move is_known_hook() to hook.c for wider use
hook: warn when hook.<friendly-name>.jobs is set
hook: add per-event jobs config
hook: add -j/--jobs option to git hook run
hook: mark non-parallelizable hooks
hook: allow pre-push parallel execution
hook: allow parallel hook execution
hook: parse the hook.jobs config
config: add a repo_config_get_uint() helper
repository: fix repo_init() memleak due to missing _clear()
Promisor remote handling has been refactored and fixed in
preparation for auto-configuration of advertised remotes.
* cc/promisor-auto-config-url:
t5710: use proper file:// URIs for absolute paths
promisor-remote: remove the 'accepted' strvec
promisor-remote: keep accepted promisor_info structs alive
promisor-remote: refactor accept_from_server()
promisor-remote: refactor has_control_char()
promisor-remote: refactor should_accept_remote() control flow
promisor-remote: reject empty name or URL in advertised remote
promisor-remote: clarify that a remote is ignored
promisor-remote: pass config entry to all_fields_match() directly
promisor-remote: try accepted remotes before others in get_direct()
The check that implements the logic to see if an in-core cache-tree
is fully ready to write out a tree object was broken, which has
been corrected.
* dl/cache-tree-fully-valid-fix:
cache-tree: fix inverted object existence check in cache_tree_fully_valid
Code clean-up to use the right instance of a repository instance in
calls inside refs subsystem.
* sp/refs-reduce-the-repository:
refs/reftable-backend: drop uses of the_repository
refs: remove the_hash_algo global state
refs: add struct repository parameter in get_files_ref_lock_timeout_ms()
The "test_expect_success 'tag following always works over v0 http'"
test in t5551 fails when it tries to run "git init tags", but this
happens only when EXPENSIVE test is allowed to run.
This is because the step tries to create a repository with "git init
tags" but the EXPENSIVE test that runs way before it creates and
leaves around a temporary file "tags". Have the EXPENSIVE test
clean it up after itself.
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As is done for all the other maintenance tasks, let's release the ODB
also before starting the geometric repacking. That way, the `.idx` files
won't be `mmap()`ed when they are to be deleted (which does not work on
Windows because you cannot delete files on that platform as long as they
are kept open by a process).
This regression was introduced by 9bc151850c (builtin/maintenance:
introduce "geometric-repack" task, 2025-10-24), but was only noticed
once geometric repacking was made the default in 452b12c2e0 (builtin/
maintenance: use "geometric" strategy by default, 2026-02-24).
The fix recapitulates my work from df76ee7b77f0 (run-command: offer to
close the object store before running, 2021-09-09) & friends.
To guard against future regressions of this kind, add a check to
`run_and_verify_geometric_pack()` in `t7900` that detects orphaned
`.idx` files left behind after repacking. Contrary to interactive
calls, the `git maintenance` call in that test case would _not_ block on
Windows, asking whether to retry deleting that file, which is the reason
why this bug was not caught earlier.
Furthermore, since the default behavior of `DeleteFileW()` was changed
at some point between Windows 10 Build 17134.1304 and Build 18363.657
to use POSIX semantics (see https://stackoverflow.com/a/60512798),
the added orphaned-`.idx` check would be insufficient to catch this
regression on modern Windows without emulating legacy delete semantics
via `GIT_TEST_LEGACY_DELETE=1`.
This fixes https://github.com/git-for-windows/git/issues/6210.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At some point between Windows 10 Build 17134.1304 and Build 18363.657,
the default behavior of `DeleteFileW()` was changed to use POSIX
semantics (https://stackoverflow.com/a/60512798). Under those semantics,
a file can be deleted even when another process holds an active
`MapViewOfFile` view on it: the directory entry is removed immediately,
but the underlying data persists until the last handle is closed.
On older Windows versions (and Windows 10 builds before that change),
`DeleteFileW()` uses legacy semantics where deletion fails outright if
any process holds a file mapping.
To allow testing code paths that depend on the legacy behavior, introduce
a `GIT_TEST_LEGACY_DELETE` environment variable. When set, `mingw_unlink()`
uses `SetFileInformationByHandle()` with `FileDispositionInfo` (the
non-POSIX variant) instead of `DeleteFileW()`, forcing legacy delete
semantics regardless of the Windows version.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_worktree_from_repository() returns a struct worktree that
describes the worktree that the repository argument would operate
on. Since 0f77914760 (worktree: remove "the_repository" from
is_current_worktree(), 2026-03-26) that worktree is always the
"current" worktree. Change the name to get_current_worktee() to
reflect better what the function does.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The l10n workflow uses `mshick/add-pr-comment` to post git-po-helper
reports as comments on translation pull requests. It was still pinned
to v2, which runs on Node.js 20. GitHub is phasing out the Node.js 20
runtime on Actions runners, so staying on v2 will eventually cause the
"Create comment in pull request for report" step to fail.
The sole breaking change in v3 is the switch from Node.js 20 to
Node.js 24 (https://github.com/mshick/add-pr-comment/releases/tag/v3.0.0).
The action's inputs and outputs are unchanged, so the upgrade is a
drop-in replacement. Subsequent v3.x releases added new opt-in
features (message truncation, retry with exponential backoff, file
attachments, commit comment support, "delete on status") but none of
them affect existing callers that do not opt in.
See also:
- Changelog: https://github.com/mshick/add-pr-comment/blob/main/CHANGELOG.md
- Compare: https://github.com/mshick/add-pr-comment/compare/v2...v3
Pointed-out-by: Christoph Grüninger <foss@grueninger.de>
Assisted-by: Claude Opus 4.6
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The v1 of `git-for-windows/setup-git-for-windows-sdk` runs on
Node.js 20, which GitHub is phasing out of the Actions runners.
v2 moves the action to Node.js 24 so that the CI jobs relying on
a Git for Windows SDK keep working once Node.js 20 is removed.
The risk is very low: v2 contains no functional changes to the
SDK setup itself, only the runtime upgrade. The action still
provisions the same minimal SDK and exposes the same outputs.
The sole precondition is a recent Actions Runner (>= 2.327.1),
which the github.com-hosted runners already satisfy.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Every workflow currently pins `actions/checkout` to v5, which was
introduced primarily to move to the Node.js 24 runtime. v6 is the
next release and worth picking up so we stay on a maintained version
of the action.
The one behaviorally interesting change in v6:
`persist-credentials` now stores the helper credentials under
`$RUNNER_TEMP` instead of writing them directly into the local
`.git/config`. Two implications follow:
1. In the normal case this is an unambiguous improvement -- the
token no longer lands in `.git/config`, reducing the risk of
inadvertently leaking it through workspace archiving
(`upload-artifact` snapshots, cache entries, core dumps, ...).
2. Docker container actions require an Actions Runner of at least
v2.329.0 to find the credentials in their new location. The
github.com-hosted runners our CI uses are already past that
version, so this does not affect us. Downstream users running
self-hosted runners may need to update them before adopting
this version of the action.
Risk analysis: our checkout steps either check out the default
repository (no special credential requirements) or, in the `vs-build`
job, explicitly set `repository: microsoft/vcpkg` and
`path: compat/vcbuild/vcpkg`. Neither case relies on the precise
location of the persisted credentials -- subsequent steps interact
with the API via the runner-provided `GITHUB_TOKEN` directly -- so
the v6 credential-storage change is transparent to our workflows.
The diff is purely the `@vN` identifier; there are no input or
output changes.
See also:
- Release notes: https://github.com/actions/checkout/releases
- Changelog: https://github.com/actions/checkout/blob/main/CHANGELOG.md
- Compare: https://github.com/actions/checkout/compare/v5...v6
Originally-authored-by: dependabot[bot] <support@github.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only use we have of `actions/github-script` is the "skip if the
commit or tree was already tested" step in `main.yml`, which checks
whether an identical tree-SHA was already built successfully. It
currently pins v8; v9 is the latest release.
What v9 changes:
- The `ACTIONS_ORCHESTRATION_ID` environment variable is now
appended to the HTTP user-agent string. This is transparent to
our script.
- A new injected `getOctokit` factory lets scripts create
additional authenticated clients in the same step without
importing `@actions/github`. We do not use it.
- Two breaking changes affect scripts that either call
`require('@actions/github')` (fails at runtime, because
`@actions/github` v9 is now ESM-only) or that shadow the
implicit `getOctokit` parameter via `const`/`let` (syntax
error). Our script does neither -- it only uses the pre-supplied
`github` REST client and `core` helpers -- so the upgrade is
safe.
Risk analysis: the step is advisory. It sets `enabled=' but skip'`
as an optimization to avoid re-running CI on a tree that was already
tested successfully. Even if the v9 upgrade broke the script, the
surrounding `try { ... } catch (e) { core.warning(e); }` block would
degrade it to a warning and CI would still run normally. In practice
the script continues to work identically on v9.
See also:
- Release notes: https://github.com/actions/github-script/releases
- Compare: https://github.com/actions/github-script/compare/v8...v9
Originally-authored-by: dependabot[bot] <support@github.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`actions/upload-artifact` and `actions/download-artifact` are tightly
coupled: the upload action writes artifact archives in a format that
the download action then reads. Because of this coupling, the two
actions should always be bumped together so that the artifact format
contract between them is satisfied.
All of our `actions/upload-artifact` uses are still on v5, with one
stray v4 occurrence. Keeping them on these versions would leave the
artifact-upload steps running on Node.js 20, which GitHub is phasing
out, and would eventually cause all upload steps to fail.
Going from v5 directly to v7 folds in two release bumps:
- v6 switches the action's default runtime from Node.js 20 to
Node.js 24 (v5 had preliminary Node 24 support but still defaulted
to Node 20). This is the main motivation for bumping now: it gets
us off the deprecated runtime.
- v7 adds two opt-in features: direct (unzipped) single-file uploads
via a new `archive: false` parameter, and an internal conversion of
the action to ESM to match the updated `@actions/*` packages.
Risk analysis: we never pass `archive`, so the zip-as-usual behavior
is unchanged. We also do not `require('@actions/*')` from any calling
workflow, so the ESM migration cannot affect us. The upload steps we
care about -- tracked files/build artifacts and failing-test
directories -- keep the same inputs (`name`, `path`) and outputs, so
the diff is purely the `@vN` identifier. The main precondition is a
recent Actions Runner (>= 2.327.1), which the github.com-hosted
runners used by our CI already satisfy.
While at it, align the one remaining `@v4` occurrence with the rest
so that every `upload-artifact` step uses the same version.
See also:
- Release notes: https://github.com/actions/upload-artifact/releases
- Compare: https://github.com/actions/upload-artifact/compare/v5...v7
We use `actions/download-artifact` to pass build artifacts between
the "windows-build" / "vs-build" / "windows-meson-build" jobs and
their corresponding test jobs. All callers are currently on v6;
bumping to v8 keeps this action in lockstep with the `upload-artifact`
bump above.
What v7 and v8 change:
- v7 switches the default runtime from Node.js 20 to Node.js 24 (v6
had preliminary Node 24 support but still defaulted to Node 20).
This is the main motivation: it gets us off the deprecated runtime.
- v8 makes three further changes:
* The package is converted to ESM (invisible to workflow authors).
* The action now checks the `Content-Type` header before
attempting to unzip a download, so that directly-uploaded
(unzipped) artifacts from `upload-artifact` v7 are downloaded
correctly.
* The `digest-mismatch` behaviour is changed from warn-and-
continue to a hard failure by default.
Risk analysis: defaulting hash-mismatch to a hard failure is
strictly safer than the previous warn-and-continue behaviour -- a
mismatch points to real corruption or tampering and should stop the
run. We download archives that the same workflow just uploaded, on
the same runner fleet, so false positives are not expected. Our
usage is limited to the `name` and `path` inputs, which are
unchanged between v6 and v8, so the diff is purely the `@vN`
identifier.
See also:
- Release notes: https://github.com/actions/download-artifact/releases
- Compare: https://github.com/actions/download-artifact/compare/v6...v8
Originally-authored-by: dependabot[bot] <support@github.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The v2 of `microsoft/setup-msbuild` runs on Node.js 20, which GitHub
is phasing out of the Actions runners. v3 is a minimal release whose
only substantive change is moving the action's runtime to Node.js 24,
so that our Visual Studio build jobs keep working once Node.js 20 is
removed from the runners.
The risk of this bump is very low: v3 contains no functional changes
to the action itself -- it merely adds `msbuild.exe` to `PATH`, with
no change to command-line flags, inputs, outputs, or default tool
resolution. The only precondition is a recent-enough Actions Runner,
which the github.com-hosted runners already satisfy.
See also:
- Release notes: https://github.com/microsoft/setup-msbuild/releases
- Compare: https://github.com/microsoft/setup-msbuild/compare/v2...v3
Originally-authored-by: dependabot[bot] <support@github.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When switching branches with "git checkout -m", the attempted merge
of local modifications may cause conflicts with the changes made on
the other branch, which the user may not want to (or may not be able
to) resolve right now. Because there is no easy way to recover from
this situation, we discouraged users from using "checkout -m" unless
they are certain their changes are trivial and within their ability
to resolve conflicts.
Teach the -m flow to create a temporary stash before switching and
reapply it after. On success, the stash is silently applied and
the list of locally modified paths is shown, same as a successful
"git checkout" without "-m".
If reapplying causes conflicts, the stash is kept and the user is
told they can resolve and run "git stash drop", or run "git reset
--hard" and later "git stash pop" to recover their changes.
Signed-off-by: Harald Nordgren <haraldnordgren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge_working_tree() acquires the index lock via
repo_hold_locked_index() but several early return paths exit
without calling rollback_lock_file(), leaving the lock held.
While this is currently harmless because the process exits soon
after, it becomes a problem if the function is ever called more
than once in the same process.
Add rollback_lock_file() calls to all early return paths.
Signed-off-by: Harald Nordgren <haraldnordgren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add label_ours, label_theirs, label_base, and stash_msg parameters to
apply_autostash_ref() and the autostash apply machinery so callers can
pass custom conflict marker labels through to
"git stash apply --label-ours/--label-theirs/--label-base", as well as
a custom stash message for "git stash store -m".
Signed-off-by: Harald Nordgren <haraldnordgren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a silent parameter to create_autostash_internal and introduce
create_autostash_ref_silent so that callers can create an autostash
without printing the "Created autostash" message.
Signed-off-by: Harald Nordgren <haraldnordgren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow callers of "git stash apply" to pass custom labels for conflict
markers instead of the default "Updated upstream" and "Stashed changes".
Document the new options and add a test.
Signed-off-by: Harald Nordgren <haraldnordgren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SOCKS proxy test introduced in 0ca365c2ed (http: do not ignore
proxy path, 2024-08-02) creates a Unix domain socket in
`$TRASH_DIRECTORY`. When the trash directory path is long (e.g.
when running from a deeply nested worktree), the socket path can
exceed the 108-character limit for `struct sockaddr_un.sun_path` on
Linux, causing the test to fail with "Path length ... is longer
than maximum supported length (108)".
We cannot work around this using the chdir trick our own socket code
employs, because both sides of the connection are outside our control:
the socket is created by socks4-proxy.pl via Perl's IO::Socket::UNIX,
and the client side is libcurl.
Use `mktemp -d` to create a unique temporary directory with a short
path, and place the socket inside it. This avoids collisions between
concurrent test runs (e.g. `--stress`) and tmpdir-race vulnerabilities
that a static `/tmp` path would be susceptible to.
Helped-by: Jeff King <peff@peff.net>
Assisted-by: Claude Opus 4.6
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep --column --only-match" shows the 1-based column number of the
first match on each line, but confusing numbers for further matches.
Example:
$ echo 123456789012345678901234567890 >file
$ for d in 1 2 3 4 5 6 7 8 9 0
do
git grep --no-index --column --only-matching $d file |
awk -v FS=: -v l=$d: '{l = l sprintf("%3s", $2)} END {print l}'
done
1: 1 2 12
2: 2 4 14
3: 3 6 16
4: 4 8 18
5: 5 10 20
6: 6 12 22
7: 7 14 24
8: 8 16 26
9: 9 18 28
0: 10 20 30
Report the column number of each match instead:
$ for d in 1 2 3 4 5 6 7 8 9 0
do
./git grep --no-index --column --only-matching $d file |
awk -v FS=: -v l=$d: '{l = l sprintf("%3s", $2)} END {print l}'
done
1: 1 11 21
2: 2 12 22
3: 3 13 23
4: 4 14 24
5: 5 15 25
6: 6 16 26
7: 7 17 27
8: 8 18 28
9: 9 19 29
0: 10 20 30
We need to adjust the test in t7810 as well. The file it uses has the
following five lines; I add a line highlighting the matches and a ruler
at the bottom here, to make it easier to see that the second "mmap"
indeed starts at column 14:
foo mmap bar
foo_mmap bar
foo_mmap bar mmap
foo mmap bar_mmap
foo_mmap bar mmap baz
==== ====
123456789 123456789 1
Reported-by: Brandon Chinn <brandonchinn178@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Patrick Steinhardt