On Windows, the terminal cannot be opened in read-write mode, so
we need distinct pairs for reading and writing. Since this works
fine on other platforms as well, always open them in pairs.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By moving the echo-disabling code to a separate function, we can
implement OS-specific versions of it for non-POSIX platforms.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set a control-handler to prevent the process from terminating, and
simulate SIGINT so it can be handled by a signal-handler as usual.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure SIG_DFL for SIGALRM exits with 128 + SIGALRM so other
processes can diagnose why it exits.
While we're at it, make sure we only write to stderr if it's a
terminal, and change the output to match that of Linux.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --stat" miscounted the total number of changed lines when
binary files were involved and hidden beyond --stat-count. It also
miscounted the total number of changed files when there were
unmerged paths.
* lt/diff-stat-show-0-lines:
t4049: refocus tests
diff --shortstat: do not count "unmerged" entries
diff --stat: do not count "unmerged" entries
diff --stat: move the "total count" logic to the last loop
diff --stat: use "file" temporary variable to refer to data->files[i]
diff --stat: status of unmodified pair in diff-q is not zero
test: add failing tests for "diff --stat" to t4049
New remote helper for hg.
* fc/remote-hg: (22 commits)
remote-hg: fix for older versions of python
remote-hg: fix for files with spaces
remote-hg: avoid bad refs
remote-hg: try the 'tip' if no checkout present
remote-hg: fix compatibility with older versions of hg
remote-hg: add missing config for basic tests
remote-hg: the author email can be null
remote-hg: add option to not track branches
remote-hg: add extra author test
remote-hg: add tests to compare with hg-git
remote-hg: add bidirectional tests
test-lib: avoid full path to store test results
remote-hg: add basic tests
remote-hg: fake bookmark when there's none
remote-hg: add compat for hg-git author fixes
remote-hg: add support for hg-git compat mode
remote-hg: match hg merge behavior
remote-hg: make sure the encoding is correct
remote-hg: add support to push URLs
remote-hg: add support for remote pushing
...
* km/send-email-remove-cruft-in-address:
git-send-email: allow edit invalid email address
git-send-email: ask what to do with an invalid email address
git-send-email: remove invalid addresses earlier
git-send-email: fix fallback code in extract_valid_address()
git-send-email: remove garbage after email address
General clean-ups in various areas, originally written to support a
patch that later turned out to be unneeded.
* jk/send-email-sender-prompt:
t9001: check send-email behavior with implicit sender
t: add tests for "git var"
ident: keep separate "explicit" flags for author and committer
ident: make user_ident_explicitly_given static
t7502: factor out autoident prerequisite
test-lib: allow negation of prerequisites
Finishing touches to "git rm $submodule" that removes the working
tree of a submodule.
* jl/submodule-rm:
Teach rm to remove submodules when given with a trailing '/'
The key "gitweb.remote_heads" is not legal git config; this maps it to
"gitweb.remoteheads".
* pp/gitweb-config-underscore:
gitweb: make remote_heads config setting work
Clean up completion tests. Use of conslidated helper may make
instrumenting one particular test during debugging of the test
itself, but I think that issue should be addressed in some other
way (e.g. making sure individual tests in 9902 can be skipped).
* fc/completion-test-simplification:
completion: simplify __gitcomp() test helper
completion: refactor __gitcomp related tests
completion: consolidate test_completion*() tests
completion: simplify tests using test_completion_long()
completion: standardize final space marker in tests
completion: add comment for test_completion()
The documentation mentioned only newlines and double quotes as
characters needing escaping, but the backslash also needs it. Also, the
documentation was not clearly saying that double quotes around the file
name were required (double quotes in the examples could be interpreted as
part of the sentence, not part of the actual string).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A mediawiki page can contain, and even start with a " character, we have
to escape it when generating the fast-export stream, as well as \
character. While we're there, also escape newlines, but I don't think we
can get them from MediaWiki pages.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The primary thing Linus's patch wanted to change was to make sure
that 0-line change appears for a mode-only change. Update the
first test to chmod a file that we can see in the output (limited
by --stat-count) to demonstrate it. Also make sure to use test_chmod
and compare the index and the tree, so that we can run this test
even on a filesystem without permission bits.
Later two tests are about fixes to separate issues that were
introduced and/or uncovered by Linus's patch as a side effect, but
the issues are not related to mode-only changes. Remove chmod from
the tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise the user might get something like:
git-completion.sh:2466: command not found: compdef
If this script is loaded before compinit. The script would work either
way, but let's not be more annoying to the user.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We allow send-email to use an implicitly-defined identity
for the sender (because there is still a confirmation step),
but we abort when we cannot generate such an identity. Let's
make sure that we test this.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git p4" used to try expanding malformed "$keyword$" that spans
across multiple lines.
* pw/maint-p4-rcs-expansion-newline:
git p4: RCS expansion should not span newlines
We do not currently have any explicit tests for "git var" at
all (though we do exercise it to some degree as a part of
other tests). Let's add a few basic sanity checks.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The context of the example to push into refs/remotes/satellite/
hierarchy of the other repository needs to be spelled out explicitly
for the value of this example to be fully appreciated. Make it so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As Amit Bakshi reported, older versions of python (< 2.7) don't have
subprocess.check_output, so let's use subprocess.Popen directly as
suggested.
Suggested-by: Amit Bakshi <ambakshi@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jh/update-ref-d-through-symref:
Fix failure to delete a packed ref through a symref
t1400-update-ref: Add test verifying bug with symrefs in delete_ref()
Even though we show a separate *UNMERGED* entry in the patch and
diffstat output (or in the --raw format, for that matter) in
addition to and separately from the diff against the specified stage
(defaulting to #2) for unmerged paths, they should not be counted in
the total number of files affected---that would lead to counting the
same path twice.
The separation done by the previous step makes this fix simple and
straightforward. Among the filepairs in diff_queue, paths that
weren't modified, and the extra "unmerged" entries do not count as
total number of files.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diffstat generation logic, with --stat-count limit, is
implemented as three loops.
- The first counts the width necessary to show stats up to
specified number of entries, and notes up to how many entries in
the data we need to iterate to show the graph;
- The second iterates that many times to draw the graph, adjusts
the number of "total modified files", and counts the total
added/deleted lines for the part that was shown in the graph;
- The third iterates over the remainder and only does the part to
count "total added/deleted lines" and to adjust "total modified
files" without drawing anything.
Move the logic to count added/deleted lines and modified files from
the second loop to the third loop.
This incidentally fixes a bug. The third loop was not filtering
binary changes (counted in bytes) from the total added/deleted as it
should. The second loop implemented this correctly, so if a binary
change appeared earlier than the --stat-count cutoff, the code
counted number of added/deleted lines correctly, but if it appeared
beyond the cutoff, the number of lines would have mixed with the
byte count in the buggy third loop.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Erik Faye-Lund