The expected output from --dirstat=0, is to include any directory with
changes, even if those changes contribute a minuscule portion of the total
changes. However, currently, directories that contribute less than 0.1% are
not included, since their 'permille' value is 0, and there is an
'if (permille)' check in gather_dirstat() that causes them to be ignored.
This test is obviously intended to exclude directories that contribute no
changes whatsoever, but in this case, it hits too broadly. The correct
check is against 'this_dir' from which the permille is calculated. Only if
this value is 0 does the directory truly contribute no changes, and should
be skipped from the output.
This patches fixes this issue, and updates corresponding testcases to
expect the new behvaior.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, t4013 is the only selftest that exercises the --dirstat machinery,
but it only does a superficial verification of --dirstat's output.
This patch adds a new selftest - t4047-diff-dirstat.sh - which prepares a
commit containing:
- unchanged files, changed files and files with rearranged lines
- copied files, moved files, and unmoved files
It then verifies the correct dirstat output for that commit in the following
dirstat modes:
- --dirstat
- -X
- --dirstat=0
- -X0
- --cumulative
- --dirstat-by-file
- (plus combinations of the above)
Each of the above tests are also run with:
- no rename detection
- rename detection (-M)
- expensive copy detection (-C -C)
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply parameter expansion. Also use here document to save
test results instead of appending each line with ">>".
Signed-off-by: Mathias Lafeldt <misfire@debugon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 9d8a5a5 (diffcore-rename: refactor "too many candidates" logic,
2011-01-06), diffcore_rename() initializes num_src but does not use it
anymore. "-Wunused-but-set-variable" in gcc-4.6 complains about this.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/rename-degrade-cc-to-c:
diffcore-rename: fall back to -C when -C -C busts the rename limit
diffcore-rename: record filepair for rename src
diffcore-rename: refactor "too many candidates" logic
builtin/diff.c: remove duplicated call to diff_result_code()
* mz/rebase: (34 commits)
rebase: define options in OPTIONS_SPEC
Makefile: do not install sourced rebase scripts
rebase: use @{upstream} if no upstream specified
rebase -i: remove unnecessary state rebase-root
rebase -i: don't read unused variable preserve_merges
git-rebase--am: remove unnecessary --3way option
rebase -m: don't print exit code 2 when merge fails
rebase -m: remember allow_rerere_autoupdate option
rebase: remember strategy and strategy options
rebase: remember verbose option
rebase: extract code for writing basic state
rebase: factor out sub command handling
rebase: make -v a tiny bit more verbose
rebase -i: align variable names
rebase: show consistent conflict resolution hint
rebase: extract am code to new source file
rebase: extract merge code to new source file
rebase: remove $branch as synonym for $orig_head
rebase -i: support --stat
rebase: factor out call to pre-rebase hook
...
* en/merge-recursive:
merge-recursive: tweak magic band-aid
merge-recursive: When we detect we can skip an update, actually skip it
t6022: New test checking for unnecessary updates of files in D/F conflicts
t6022: New test checking for unnecessary updates of renamed+modified files
* jh/dirstat:
--dirstat: In case of renames, use target filename instead of source filename
Teach --dirstat not to completely ignore rearranged lines within a file
--dirstat-by-file: Make it faster and more correct
--dirstat: Describe non-obvious differences relative to --stat or regular diff
* rr/doc-content-type:
Documentation: Allow custom diff tools to be specified in 'diff.tool'
Documentation: Add diff.<driver>.* to config
Documentation: Move diff.<driver>.* from config.txt to diff-config.txt
Documentation: Add filter.<driver>.* to config
* rj/sparse:
sparse: Fix some "symbol not declared" warnings
sparse: Fix errors due to missing target-specific variables
sparse: Fix an "symbol 'merge_file' not decared" warning
sparse: Fix an "symbol 'format_subject' not declared" warning
sparse: Fix some "Using plain integer as NULL pointer" warnings
sparse: Fix an "symbol 'cmd_index_pack' not declared" warning
Makefile: Use cgcc rather than sparse in the check target
* mg/reflog-with-options:
reflog: fix overriding of command line options
t/t1411: test reflog with formats
builtin/log.c: separate default and setup of cmd_log_init()
If bashcompinit has not already been autoloaded, do so
automatically, as it is required to properly parse the
git-completion file with ZSH.
Helped-by: Felipe Contreras
Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After posting a short request using CURLOPT_POSTFIELDS, if the slot
is reused for posting a large payload, the slot ends up having both
POSTFIELDS (which now points at a random garbage) and READFUNCTION,
in which case the curl library tries to use the stale POSTFIELDS.
Clear it as part of the general slot initialization in get_active_slot().
Heavylifting-by: Shawn Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn Pearce <spearce@spearce.org>
In particular, sparse issues the "symbol 'a_symbol' was not declared.
Should it be static?" warnings for the following symbols:
attr.c:468:12: 'git_etc_gitattributes'
attr.c:476:5: 'git_attr_system'
vcs-svn/svndump.c:282:6: 'svndump_read'
vcs-svn/svndump.c:417:5: 'svndump_init'
vcs-svn/svndump.c:432:6: 'svndump_deinit'
vcs-svn/svndump.c:445:6: 'svndump_reset'
The symbols in attr.c only require file scope, so we add the static
modifier to their declaration.
The symbols in vcs-svn/svndump.c are external symbols, and they
already have extern declarations in the "svndump.h" header file,
so we simply include the header in svndump.c.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, sparse issues the following errors:
attr.c:472:43: error: undefined identifier 'ETC_GITATTRIBUTES'
config.c:821:43: error: undefined identifier 'ETC_GITCONFIG'
exec_cmd.c:14:37: error: undefined identifier 'PREFIX'
exec_cmd.c:83:28: error: undefined identifier 'GIT_EXEC_PATH'
builtin/help.c:328:46: error: undefined identifier 'GIT_MAN_PATH'
builtin/help.c:374:40: error: undefined identifier 'GIT_INFO_PATH'
builtin/help.c:382:45: error: undefined identifier 'GIT_HTML_PATH'
git.c:96:42: error: undefined identifier 'GIT_HTML_PATH'
git.c:241:35: error: invalid initializer
http.c:293:43: error: undefined identifier 'GIT_HTTP_USER_AGENT'
which is caused by not passing the target-specific additions to
the EXTRA_CPPFLAGS variable to cgcc.
In order to fix the problem, we define a new sparse target which
depends on a set of non-existent "sparse object" files (*.sp)
which correspond to the set of C source files. In addition to the
new target, we also provide a new pattern rule for "creating" the
sparse object files from the source files by running cgcc. This
allows us to add '*.sp' to the rules setting the target-specific
EXTRA_CPPFLAGS variable, which is then included in the new pattern
rule to run cgcc.
Also, we change the 'check' target to re-direct the user to the
new sparse target.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When relative dates are more than about a year ago, we start
writing them as "Y years, M months". At the point where we
calculate Y and M, we have the time delta specified as a
number of days. We calculate these integers as:
Y = days / 365
M = (days % 365 + 15) / 30
This rounds days in the latter half of a month up to the
nearest month, so that day 16 is "1 month" (or day 381 is "1
year, 1 month").
We don't round the year at all, though, meaning we can end
up with "1 year, 12 months", which is silly; it should just
be "2 years".
Implement this differently with months of size
onemonth = 365/12
so that
totalmonths = (long)( (days + onemonth/2)/onemonth )
years = totalmonths / 12
months = totalmonths % 12
In order to do this without floats, we write the first formula as
totalmonths = (days*12*2 + 365) / (365*2)
Tests and inspiration by Jeff King.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
6abd933 (git-svn: allow the mergeinfo property to be set, 2010-09-24)
introduced the --mergeinfo option. Document it.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The local value of the config variable tar.umask is not passed to the
other side with --remote. We may want to change that, but for now just
document this fact.
Reported-by: Jacek Masiulaniec <jacek.masiulaniec@gmail.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On systems where the local time and file modification time may be out of
sync (e.g. test directory on NFS) t3306 and t5305 can fail because prune
compares times such as "now" (client time) with file modification times
(server times for remote file systems). I.e., these are spurious test
failures.
Avoid this by setting the relevant modification times to the local time.
Noticed on a system with as little as 2s time skew.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a spurious empty line which prevented asciidoc from recognizing a
list continuation mark ('+'), so that it does not get output literally any
more.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I found that some doubled words had snuck back into projects from which
I'd already removed them, so now there's a "syntax-check" makefile rule in
gnulib to help prevent recurrence.
Running the command below spotted a few in git, too:
git ls-files | xargs perl -0777 -n \
-e 'while (/\b(then?|[iao]n|i[fst]|but|f?or|at|and|[dt])\s+\1\b/gims)' \
-e '{$n=($` =~ tr/\n/\n/ + 1); ($v=$&)=~s/\n/\\n/g;' \
-e 'print "$ARGV:$n:$v\n"}'
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '-r' command-line option is a no-op provided only for backward
compatiblity since abd6970 (cherry-pick: make -r the default, 2006-10-05),
and somehow ended up surviving across reimplementation in C at 9509af6
(Make git-revert & git-cherry-pick a builtin, 2007-03-01) and another
rewrite of the command line parser at f810379 (Make builtin-revert.c use
parse_options, 2007-10-07). We should have stopped advertising the option
long time ago.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johan Herland