Mark Wooding noticed there was a type mismatch warning in git.c; this
patch does things slightly differently (mostly tightening const) and
was what I was holding onto, waiting for the setup-revisions change
to be merged into the master branch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In particular, git-tools.txt isn't a manpage, and my Asciidoc gets upset
by it. The simplest fix is to Remove articles from the list of manpages
the Makefile.
Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
... and stripped trailing whitespace to appease the Gods...
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When amending a commit only to update the commit log message, git-status
would rightly say "Nothing to commit." Do not let this prevent commit to
be made.
Signed-off-by: Junio C Hamano <junkio@cox.net>
I am very sorry to do this, but without this funky octopus, "git
log --no-merges master..next" will show commits already merged
into "master" forever.
There are some commits on the next branch (which is never to be
rewound) that are reverts of other commits on the next branch.
They are to revert the finer grained delta experiments that
turned out to have undesirable performance effects. Also there
are some other commits that were first done as a merge into
"next" (a pull request based on next) and then cherry picked
into master. Since they are not going to be merged into
"master" ever, they will stay forever in "log master..next".
Yuck.
So this commit records the fact that the commits currently shown
by "git log --no-merges master..next" to be merged into "master"
are already in the master, either because they really are (in
the case of git-cvsserver bits, which needed cherry-picking into
"master"), or because they are fully reverted in "next" (in the
case of finer-grained delta bits).
Here is the way I made this commit:
(1) Inspect "gitk --no-merges --parents master..next"
This shows what git thinks are missing from master. It
shows chain of commits that are already merged and chain of
commits whose net effect should amount to a no-op.
Look at each commits and make sure they are either unwanted
or already merged by cherry-picking.
(2) Record the tip of branches that I do not want. In this
case, the following were unwanted:
cfcbd3427e cvsserver
c436eb8cf1 diff-delta
38fd0721d0 diff-delta
f0bcd511ee cvsserver
2b8d9347aa diff-delta
(3) Shorten the list by finding independent ones from the
above.
$ git show-branch --independent $the $above $tips
cfcbd3427ec436eb8cf1
(4) Checkout "master" and cauterize them with "ours" strategy:
$ git merge -s ours "`cat $this-file`" HEAD cfcbd3 c436eb
If `git-append-signed-off-by' is non-nil, automatically append a
sign-off line to the log message when editing it.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Update .gitignore files in the status list as they are created or
modified.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also set the list-buffers-directory variable for nicer buffer list
display.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fixed octal constants for XEmacs.
Added highlighting support in log-edit buffer for Emacs CVS.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add a basic Emacs VC backend. It currently supports the following
commands: checkin, checkout, diff, log, revert, and annotate. There is
only limited support for working with revisions other than HEAD.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* lt/rev-list:
setup_revisions(): handle -n<n> and -<n> internally.
git-log (internal): more options.
git-log (internal): add approxidate.
Rip out merge-order and make "git log <paths>..." work again.
Tie it all together: "git log"
Introduce trivial new pager.c helper infrastructure
git-rev-list libification: rev-list walking
Splitting rev-list into revisions lib, end of beginning.
rev-list split: minimum fixup.
First cut at libifying revlist generation
A brief survey of useful git tools, including third-party
and external projects.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-cvsserver now knows how to do the pserver auth chat when the user
is anonymous. To get it to work, add a line to your inetd.conf like
cvspserver stream tcp nowait nobody git-cvsserver pserver
(On some inetd implementations you may have to put the pserver parameter twice.)
Commits are blocked. Naively, git-cvsserver assumes non-malicious users. Please
review the code before setting this up on an internet-accessible server.
NOTE: the <nobody> user above will need write access to the .git directory
to maintain the sqlite database. Updating of the sqlite database should be
put in an update hook to avoid this problem, so that it is maintained by
users with write access.
We now have different error messages when the repo is not found vs repo is
not configured to allow gitcvs. Should help users during initial checkouts.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
To create nested directories without (or before) sending file entries
is rather tricky. Most clients just work. Eclipse, however, expects
a very specific sequence of events. With this patch, cvsserver meets
those expectations.
Note: we may want to reuse prepdir() in req_update -- should move it
outside of req_co. Right now prepdir() is tied to how req_co() works.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fixes two bugs introduced when we switched to generic tree
traversal code.
(1) directory mode recorded silently became 0755, not 0777
(2) if passed a tree object (not a commit), it emitted an
alarming error message (but proceeded anyway).
Signed-off-by: Junio C Hamano <junkio@cox.net>
C programmers are well used to counting from zero, but every
other text file tool starts counting from 1.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I thought passing --stop-on-copy to svn would save us from all
the trouble svn-arch-mirror had with directory (project) copies.
I was wrong, there was one thing I overlooked.
If a tree was moved from /foo/trunk to /bar/foo/trunk with no
other changes in r10, but the last change was done in r5, the
Last Changed Rev (from svn info) in /bar/foo/trunk will still be
r5, even though the copy in the repository didn't exist until
r10.
Now, if we ever detect that the Last Changed Rev isn't what
we're expecting, we'll run svn diff and only croak if there are
differences between them.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When inspecting contents of topic branches for yet-to-be-merged
commits, a commit that is in the release/master branch is
uninteresting. Previous round still showed them, especially,
the ones before a topic branch that was forked from the
release/master later than other topic branches.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-mv needs to be run from the base directory so that
the check if a file is under revision also covers files
outside of a subdirectory. Previously, e.g. in the git repo,
cd Documentation; git-mv ../README .
produced the error
Error: '../README' not under version control
The test is extended for this case; it previously only tested
one direction.
Signed-off-by: Josef Weidendorfer <Josef.Weidendorfer@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
--no-signed-off-cc is still supported, for backwards compatibility
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I ended up using GIT_SVN_ID far more than I ever thought I
would. Typing less is good.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If it does change, we're screwed anyways as SVN will refuse to
commit or update. We also never access more than one SVN
repository per-invocation, so we can store it as a global, too.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In a new repository, the initial fetch creates a master branch
if one does not exist so HEAD has something to point to.
It now creates a master at the end of the initial fetch run,
pointing to the latest revision. Previously it pointed to the
first revision imported, which is generally less useful.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Syntax is compatible with git-svnimport and git-cvsimport:
normalperson = Eric Wong <normalperson@yhbt.net>
If this option is specified and git-svn encounters an SVN
committer name that it cannot parse, it git-svn will abort.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We regenerate and use git-svn-id: whenever we fetch or otherwise
commit to remotes/git-svn. We don't actually know what revision
number we'll commit to SVN at commit time, so this is useless.
It won't throw off things like 'rebuild', though, which knows to
only use the last instance of git-svn-id: in a log message
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* Fixed manually-edited commit messages not going to
remotes/git-svn on sequential commits after the sequential
commit optimization.
* format help correctly after adding 'show-ignore'
* sha1_short regexp matches down to 4 hex characters
(from git-rev-parse --short documentation)
* Print the first line of the commit message when we commit to
SVN next to the sha1.
* Document 'T' (type change) in the comments
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I've said I don't like branches in Subversion, and I still don't.
This is a bit more flexible, though, as the argument for -b is any
arbitrary git head/tag reference.
This makes some things easier:
* Importing git history into a brand new SVN branch.
* Tracking multiple SVN branches via GIT_SVN_ID, even from multiple
repositories.
* Adding tags from SVN (still need to use GIT_SVN_ID, though).
* Even merge tracking is supported, if and only the heads end up with
100% equivalent tree objects. This is more stricter but more robust
and foolproof than parsing commit messages, imho.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If git-update-index --index-info -z is used only the first
record given to the process will actually be updated as
the -z option is ignored until after all index records
have been read and processed. This meant that multiple
null terminated records were seen as a single record which
was lacking a trailing LF, however since the first record
ended in a null the C string handling functions ignored the
trailing garbage. So --index-info should be required to be
the last command line option, much as --stdin is required
to be the last command line option. Because --index-info
implies --stdin this isn't an issue as the user shouldn't
be passing --stdin when also passing --index-info.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Found with:
for i in *.txt; do
grep -A 2 "SYNOPSIS" "$i" | grep -q "^\[verse\]$" && continue
multiline=$(grep -A 3 "SYNOPSIS" "$i" | tail -n 1)
test -n "$multiline" && echo "$i: $multiline"
done
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In our last update to use the encoding while showing the commit
diff we added a new argument to this function. But we missed
updating all the callers.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some versions of sed lack the "-i" option.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If we decide to use refs/remotes/, having a convenient way to
list them would be nice.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
A recent Eclipse compat fix broke checkouts with -d. Fix it so that the server
sends the correct module name instead of the destination directory name.
Just by sending the files in an ordered fashion, clients can process them
much faster. And we can optimize our check of whether we created this
directory already -- faster.
Timings for a checkout on a commandline cvs client for a project with
~13K files totalling ~100MB:
Unsorted:
603.12 real 16.89 user 42.88 sys
Sorted:
298.19 real 26.37 user 42.42 sys
An earlier commit 8098a178b2
accidentally lost race protection from git-commit command.
This commit reinstates it. When something else updates HEAD
pointer while you were editing your commit message, the command
would notice and abort the commit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The new flag is used to amend the tip of the current branch. Prepare
the tree object you would want to replace the latest commit as usual
(this includes the usual -i/-o and explicit paths), and the commit log
editor is seeded with the commit message from the tip of the current
branch. The commit you create replaces the current tip -- if it was a
merge, it will have the parents of the current tip as parents -- so the
current top commit is discarded.
It is a rough equivalent for:
$ git reset --soft HEAD^
$ ... do something else to come up with the right tree ...
$ git commit -c ORIG_HEAD
but can be used to amend a merge commit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
A recent Eclipse compat fix broke checkouts with -d. Fix it so that the server
sends the correct module name instead of the destination directory name.
Just by sending the files in an ordered fashion, clients can process them
much faster. And we can optimize our check of whether we created this
directory already -- faster.
Timings for a checkout on a commandline cvs client for a project with
~13K files totalling ~100MB:
Unsorted:
603.12 real 16.89 user 42.88 sys
Sorted:
298.19 real 26.37 user 42.42 sys
Junio C Hamano