A description in the release notes for Git 2.55.0 has been
retroactively updated to clarify that Rust support is enabled by
default, but still optional, and will become mandatory in Git 3.0.
* jc/relnotes-2.55-rust-fix:
Rust: fix description in Release Notes to 2.55
The repository discovery and repository configuration phases, which
were previously intertwined in 'setup.c', have been split. Repository
discovery has been updated to populate a 'struct repo_discovery'
without modifying the repository state, which is then taken by
repository configuration to initialize the repository, paving the way
for clean unification of repository configuration.
* ps/setup-split-discovery-and-setup:
setup: mark `set_git_work_tree()` as file-local
setup: pass worktree to `init_db()`
setup: drop redundant configuration of `startup_info->have_repository`
setup: make repository discovery self-contained
setup: propagate prefix via repository discovery
setup: drop static `cwd` variable
setup: move prefix into repository
setup: embed repository format in discovery
setup: introduce explicit repository discovery
setup: split up concerns of `setup_git_env_internal()`
setup: unify setup of shallow file
setup: mark bogus worktree in `apply_repository_format()`
setup: rename `check_repository_format_gently()`
The reftable code has been hardened against corrupted tables by
fixing out-of-bounds writes, out-of-bounds reads, and abort calls
during parsing.
* ps/reftable-hardening:
reftable/table: fix OOB read on truncated table
reftable/table: fix NULL pointer access when seeking to bogus offsets
reftable/block: fix OOB read with bogus restart offset
reftable/block: fix use of uninitialized memory when binsearch fails
reftable/block: fix OOB read with bogus restart count
reftable/block: fix OOB read with bogus block size
reftable/block: fix OOB write with bogus inflated log size
t/unit-tests: introduce test helper to write reftable blocks
reftable/record: don't abort when decoding invalid ref value type
reftable/basics: fix OOB read on binary search of empty range
oss-fuzz: add fuzzer for parsing reftables
meson: support building fuzzers with libFuzzer
The 'git replay' command has been taught the '--linearize' option to
drop merge commits and linearize the replayed history, mimicking 'git
rebase --no-rebase-merges'.
* tc/replay-linearize:
replay: offer an option to linearize the commit topology
replay: resolve the replay base outside pick_regular_commit()
replay: add helper to put entry into replayed_commits
The sideband demultiplexer has been updated to recognize ANSI SGR
escape sequences that use colon-separated subfields (e.g., for
256-color or true-color codes).
* mm/sideband-ansi-sgr-colon-fix:
sideband: allow ANSI SGR with colon-separated subfields
The 'git_hash_*()' wrappers have been updated to be used consistently
across the codebase instead of direct calls to members of 'struct
git_hash_algo', and 'git_hash_discard()' has been made idempotent to
simplify cleanups.
* jk/git-hash-cleanups:
hash: check ctx->active flag in all wrapper functions
http: use idempotent git_hash_discard()
csum-file: use idempotent git_hash_discard()
hash: make git_hash_discard() idempotent
hash: document function pointers and wrappers
hash: convert remaining direct function calls
hash: use git_hash_init() consistently
The UTF-8 precomposition wrapper on macOS has been updated to use a
flexible array member to represent the name of a directory entry,
preventing fortified libc checks from failing when the name is
reallocated to be larger than 'NAME_MAX' bytes.
* ih/precompose-flex-array:
precompose_utf8: use a flex array for d_name
Various test scripts have been updated to clean up large temporary
files and repositories, reducing peak disk usage during testing.
Also, expensive tests have been disabled on platforms that lack
sufficient resources (like 32-bit platforms and Windows CI
runners), and the long test suite has been enabled in GitLab CI.
* ps/t-fixes-for-git-test-long:
gitlab-ci: enable "GIT_TEST_LONG"
gitlab-ci: disable RAM disk on macOS jobs
t: use `test_bool_env` to parse GIT_TEST_LONG
t7900: clean up large EXPENSIVE repository
t7508: skip EXPENSIVE test that is broken without SIZE_T_IS_64BIT
t5608: reduce maximum disk usage
t4141: fix inefficient use of dd(1)
t0021: skip EXPENSIVE test that is broken without SIZE_T_IS_64BIT
README: add GitLab CI badge to make it more discoverable
Dockerized CI jobs running in private GitHub repositories have been
adjusted to use explicit process and file limits, preventing resource
exhaustion errors on private runners.
* js/ci-dockerized-pid-limit:
ci(dockerized): raise the PID limit for private repositories
Various resource leaks, invalid file descriptor closures, and process
handle ownership issues flagged by Coverity have been fixed.
* js/coverity-fixes:
mingw: make `exit_process()` own the process handle on all paths
fsmonitor: plug token-data leak on early daemon-startup failures
reftable/table: release filter on error path
imap-send: avoid leaking the IMAP upload buffer
worktree: fix resource leaks when branch creation fails
submodule: fix cwd leak in `get_superproject_working_tree()`
dir: free allocations on parse-error paths in `read_one_dir()`
line-log: avoid redundant copy that leaks in process_ranges
run-command: avoid `close(-1)` in `start_command()` error paths
download_https_uri_to_file(): do not leak fd upon failure
loose: avoid closing invalid fd on error path
load_one_loose_object_map(): fix resource leak
Various code paths that initialize a cryptographic hash context but
bail out or finish without calling 'git_hash_final()' have been taught
to call 'git_hash_discard()' to release allocated resources, fixing
memory leaks when Git is built with non-default backends like
'OpenSSL' or 'libgcrypt'.
* jk/hash-algo-leak-fixes:
hash: add platform-specific discard functions
hash: fix memory leak copying sha256 gcrypt handles
http: discard hash in dumb-http http_object_request
check_stream_oid(): discard hash on read error
patch-id: discard hash when done
csum-file: provide a function to release checkpoints
csum-file: always finalize or discard hash
hash: add discard primitive
csum-file: drop discard_hashfile()
The alignment of commit object name abbreviations in 'git blame'
output has been optimized to reserve a column for marks (caret,
question mark, or asterisk) only when such marks are actually shown.
* rs/blame-abbrev-marks:
blame: reserve mark column only if necessary
A racy build failure under Meson has been corrected by ensuring that
the generated header file 'hook-list.h' is built before compiling files
in 'builtin_sources' that depend on it.
* mg/meson-hook-list-buildfix:
meson: restore hook-list.h to builtin_sources
Various memory leaks in the Bloom-filter code paths that are exposed
when running tests with the 'GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS=1'
environment variable have been plugged.
* jk/bloom-leak-fixes:
line-log: drop extra copy of range with bloom filters
revision: avoid leaking bloom keyvecs with multiple traversals
bloom: make bloom-filter slab initialization idempotent
The experimental 'git history' command has been taught a new 'drop'
subcommand to remove a commit and replay its descendants onto its
parent.
* ps/history-drop:
builtin/history: implement "drop" subcommand
builtin/history: split handling of ref updates into two phases
replay: expose `replay_result_queue_update()`
reset: stop assuming that the caller passes in a clean index
reset: allow the caller to specify the current HEAD object
reset: introduce ability to skip updating HEAD
reset: introduce dry-run mode
reset: modernize flags passed to `reset_working_tree()`
reset: rename `reset_head()`
reset: drop `USE_THE_REPOSITORY_VARIABLE`
read-cache: split out function to drop unmerged entries to stage 0
The 'whence' field in 'struct object_info' has been removed,
refactoring backend-specific object information retrieval into an opt-
in 'struct object_info_source' structure.
* ps/odb-drop-whence:
odb: document object info fields
odb: drop `whence` field from object info
treewide: convert users of `whence` to the new source field
odb: add `source` field to struct object_info_source
odb: make backend-specific fields optional
packfile: thread odb_source_packed through packed_object_info()
The 'git refs' toolbox has been extended with new 'create', 'delete',
'update', and 'rename' subcommands to create, delete, update, and
rename references, respectively.
* ps/refs-writing-subcommands:
builtin/refs: add "rename" subcommand
builtin/refs: add "create" subcommand
builtin/refs: add "update" subcommand
builtin/refs: add "delete" subcommand
builtin/refs: drop `the_repository`
It only makes sense to call git_hash_update(), etc, on a hash context
that has been initialized but not yet finalized or discarded. This is an
unlikely error to make, but it's easy for us to catch it and complain.
It's especially important because it would quietly "work" for many hash
backends (like sha1dc, which is just manipulating some bytes) but would
cause undefined behavior with others (like OpenSSL, which puts the
context onto the heap). Checking the flag lets us catch problems
consistently on every build.
Note that we can't do the same for git_hash_init(). Even though it would
cause a leak to call it twice (without an intervening final/discard),
the point of the function is that the contents of the struct are
undefined before the call. But calling it twice is an even less likely
error to make, so not covering it is OK.
We leave git_hash_discard() alone, as its idempotent behavior is
convenient for callers. We _could_ try to do something similar for
git_hash_final(), allowing:
git_hash_final(result, &ctx);
git_hash_final(other_result, &ctx);
but it does not make much sense. After the first final() call we have
thrown away the state, so we cannot produce the same output. We could
come up with some sensible output (the null hash, or the empty hash),
but double-calls like this are more likely a bug, so our best bet is to
complain loudly (whereas the current code produces either nonsense
output or undefined behavior, depending on the backend).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that it is OK to call git_hash_discard() even after finalizing the
hash, we no longer need the ctx_valid bool added by a2d8ea5a76 (http:
discard hash in dumb-http http_object_request, 2026-07-02).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that it is safe to call git_hash_discard() even after finalizing it,
we can simplify our cleanup logic a bit. This is mostly undoing a few
bits of 64337aecde (csum-file: always finalize or discard hash,
2026-07-02):
- We no longer need a separate free_hashfile_memory() function for
finalize_hashfile(). It can just call free_hashfile(), which will
now discard (or not) the hash as appropriate.
- When f->skip_hash is set, we don't need to discard; we can rely on
free_hashfile() to do it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You must always either finalize or discard a hash context to release any
resources, but you must call only one such function. This creates extra
work for some callers, since their cleanup code paths need to know
whether they got there via their happy path (and the finalization
happened) or due to an error (in which case they need to discard).
Let's add an "active" flag that turns a redundant discard into a noop.
That lets you safely do this:
git_hash_init(&ctx, algo);
...
if (some_error)
goto out;
...
git_hash_final(result, &ctx);
out:
git_hash_discard(&ctx);
This should avoid future errors, and will also let us simplify a few
existing callers (in future patches).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want people to use the git_hash_*() wrappers rather than the bare
function pointers in the git_hash_algo struct. Let's document them
rather than the bare pointers, and warn people away from the pointers.
Coccinelle will eventually force the use of the wrappers, but it's
helpful to lead readers in the right direction from the start.
While we're here we can document a few other bits of wisdom I've turned
up while working in this area:
- You have to initialize the destination of a git_hash_clone(). This
is something we may eventually change for efficiency, but we should
definitely document the requirement for now.
- You must eventually finalize or discard a hash, since some backends
may allocate resources during initialization.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous patch added a coccinelle rule to make sure callers always
use git_hash_init() rather than direct function pointers from the algo
struct.
Let's do the same for the rest of the git_hash_*() wrappers. I split
these out because they're a bit different: they implicitly use the algop
pointer in the git_hash_ctx. So when we convert:
-algo->update_fn(&ctx, buf, len);
+git_hash_update(&ctx, buf, len);
we drop the reference to algo entirely! But this is always going to be
the right thing. If "algo" does not match what is in ctx.algop, then
we'd already be invoking undefined behavior.
So in addition to making it possible to add more logic to the
git_hash_*() functions, we're avoiding the need to pass around the extra
algo pointer and make sure that it matches what's in "ctx".
The rest of the patch is the mechanical application of that coccinelle
patch, plus a minor cleanup in test-synthesize.c to drop a now-unused
function parameter (since we don't have to pass around the algo
separately anymore).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We'd like to add more logic to git_hash_init(), but many callers skip it
and call algop->init_fn() directly. Let's make sure we're consistently
using the wrapper by adding a coccinelle rule.
Besides the coccinelle file itself, this is a purely mechanical
conversion based on the patch it generates. There should be no bare
init_fn() calls left (except for the one in the wrapper).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Finish incomplete sentence to say that we
- build Git 2.55 by default with Rust,
- but you can opt out and build 2.55 without Rust,
- but Rust will become mandatory in Git 3.0 and later.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the stated goals of git-replay(1) is to allow implementing the
git-rebase(1) functionality on the server side.
The default mode of git-rebase(1) is to act as if `--no-rebase-merges`
was given. This mode drops merge commits instead of replaying them, and
linearizes the history into a sequence of regular (single-parent)
commits.
Add option `--linearize` to git-replay(1) to do the same. Each replayed
commit is stacked on top of the previously replayed one. When a merge is
encountered, the commits reachable from all of its sides are replayed
into the single line and the merge itself is dropped.
If a ref was pointing to a merge commit, that ref is updated to the
merge's last replayed ancestor.
git-replay(1) accepts multiple revision ranges, for example:
$ git replay --onto main topic1 topic2
Without `--linearize` this replays 'topic1' and 'topic2' onto 'main'
independently and updates both refs.
With `--linearize` the whole set is flattened into one line: the ranges
are stacked on top of each other rather than replayed side by side, so
both refs end up pointing at different points along that single history.
Replaying all revision ranges into one single linear history is
intentional and it's the only way to ensure predictable results. A user
who wants to linearize ranges independently is advised to use separate
git-replay(1) invocations.
Linearizing is a distinct operation, and flattening merge commits is
just one aspect of that. Recreating merges would be a separate mode, so
rather than mirror git-rebase(1)'s `--rebase-merges[=<mode>]` interface,
git-replay(1) uses its own `--linearize` option.
Based-on-patches-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Toon Claes <toon@iotcl.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Depending on what gets passed into the function pick_regular_commit(),
it decides the new base for the replayed commit. It first tries to find
the replayed results of `pickme`'s parent in the `replayed_commits` map.
If not found, it falls back to `onto`.
When using git-replay(1) with --onto, the fallback is the revision
passed in with this option, but when using --revert, the fallback is
`last_commit`.
It's rather confusing the base is decided partly inside
pick_regular_commit() and partly by its caller.
Move the base selection completely into the caller: replay_revisions().
This bundles all the logic of deciding on the base together. Also, this
reduces the number of parameters of pick_regular_commit(), making its
interface cleaner.
This refactoring doesn't bring any behavior changes.
Signed-off-by: Toon Claes <toon@iotcl.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function replay_revisions() in replay.c is rather lengthy. Extract
the logic to put a commit entry into a `struct mapped_commits` into a
helper function put_mapped_commit().
While at it, rename mapped_commit() to get_mapped_commit() to pair with
this new function.
Signed-off-by: Toon Claes <toon@iotcl.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SGR values used for 256-color formatting are officially defined to
be a single field with :-separated subfields (e.g. "\e[1;38:5:XX;40m")
despite the more common but kludgy use of separate values (which then
become context-dependent and lead to misinterpretation by incompatible
terminals).
Signed-off-by: Mantas Mikulėnas <grawity@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the preceding commit we have removed the last callers of
`set_git_work_tree()` that is located outside of "setup.c". Remove its
declaration and mark the function as file-local.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the preceding commits we have refactored how we discover and set up
repositories so that we cannot end up with partially-configured repos.
Instead, we apply the gitdir, worktree and repository format in a single
location, only.
Initializing a new repository has the same antipattern though: while
most of the information for the new repository is passed via parameters,
the work tree is instead propagated by configuring the repository's work
tree.
Refactor the code so that we also pass the work tree as an explicit
parameter. Like this, configuration fo the repository happens in a
single spot, too, just as with repository discovery.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In `init_db()` we set `startup_info->have_repository` twice: once before
reading and applying the repository format and once after. This is
redundant though, as configuring the repository format does not rely on
this variable at all.
Remove the first such site. While at it, fix up formatting a bit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the preceding commits we have introduced a separate repository
discovery phase and refactored the logic so that we have two clear
phases:
1. Repository discovery, which doesn't modify the repository itself at
all.
2. Repository configuration, which takes the information we have
discovered to set up the repository.
Extract the first phase into a new function `repo_discover()` to further
stress these two different phases.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the preceding commits we have started to propagate all information
required for the configuration of the repository via a new `struct
repo_discovery`. The only exception is the repository's prefix, which we
still return via the return parameter.
This is conceptually fine, but somewhat inconsistent. Refactor this to
instead propagate the prefix via the repository discovery, too.
While at it, drop a static variable in `repo_discover_bare_gitdir()`.
We apply its value to the repository discovery anyway, so we don't have
to keep it around afterwards anymore.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current working directory is stored as part of a static strbuf
variable. This variable had to have a lifetime longer than its
containing function because the value we return typically points into
that buffer.
In the preceding commit we have moved the prefix into the repository
though. Consequently, we can now return the repository's prefix instead
of the local one and thus properly manage the lifecycle of this local
variable.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The repository prefix is currently stored in the startup info. This
feels somewhat awkward though, as it is inherently a property of a given
repository.
Move the prefix into the repository accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All functions related to repository discovery receive both a `struct
repository_discovery` and `struct repository_format` as input, and the
expectation is that both will be populated. Refactor this so that the
repository format is part of the discovery result.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When setting up the global repository we intermix repository discovery
and repository configuration: we repeatedly call `set_git_work_tree()`
and `apply_and_export_relative_gitdir()` until we're happy with the
result. The result of this is then a partially-configured repository
that we use for further setup.
This process is quite hard to follow, as it's never quite clear which
parts of the repository have been configured already and which haven't.
Furthermore, it means that the repository configuration is distributed
across many different places instead of having it neatly contained in a
single location. Ultimately, this is the reason that we cannot use a
central function like `repo_init()`.
Refactor the logic so that we stop partially-configuring a repository
and instead populate a new `struct repo_discovery`. This allow us to
essentially split repository setup into two phases:
- The first phase only figures out parameters required to configure
the repository.
- The second phase then takes these parameters and applies them to the
repository.
Like this, we'll never end up with a partially-configured repository and
can eventually extend `repo_init()` to handle the full initialization
for us.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function `setup_git_env_internal()` does two completely unrelated
things:
- It configures the repository's gitdir and propagates environment
variables into it.
- It configures a couple of global parameters via environment
variables.
The function is called when we initialize the repository's path, but
it's also called via `chdir_notify_register()` whenever we change the
current working directory. While we indeed have to reconfigure the
gitdir in case it's a relative path, it doesn't make sense to reapply
the global environment variables.
Split up concerns of this function along the above delineation. Handling
of the global environment variables is moved into `init_git()`, as they
can be considered part of our setup procedure.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is possible to configure an arbitrary "shallow" file via two
mechanisms, and the respective logic to handle these is split across two
locations:
- Via the "GIT_SHALLOW_FILE" environment variable, which is handled in
`setup_git_env_internal()`.
- Via the global "--shallow-file=" command line option, which is
handled in `handle_options()`.
We can rather easily unify this logic by not configuring the shallow
file in `handle_options()`, but instead overwriting the environment
variable. The environment variable itself is then handled inside of
`apply_repository_format()`, which is responsible for configuring a
discovered Git directory.
This new logic is similar in nature to how we handle the other global
options already, all of which end up setting an environment variable.
So for one this gives us more consistency. But more importantly, this
change means that `the_repository` will not contain any relevant state
anymore before we hit `apply_repository_format()` once we're at the end
of this patch series. Consequently, it will become possible for us to
completely discard `the_repository` and populate it anew.
Note that on first sight, this change looks like it might change the
precedence order. Before this change, we used to configure the shallow
file in the arguments handler first, and then it looks like we override
it via the environment variable. What's important to note though is the
last parameter to `set_alternate_shallow_file()`, which tells us whether
we want to overwrite a preexisting value, and when applying the value
from the environment we tell it not to overwrite preexisting values. So
in effect, the command line has precedence over the environment. After
this change, we now overwrite preexisting environment variables when we
see the argument, and consequently we keep the precedence order in tact.
With this change though we don't need the final parameter anymore that
tells `set_alternate_shallow_file()` whether or not to overwrite. We
only have a single callsite for this function now, and that function is
itself only ever called exactly once. Remove that parameter.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a repository is configured to have both "core.worktree" and
"core.bare" we emit a warning and mark the worktree configuration as
bogus so that the next call to `setup_work_tree()` will cause us to die.
This allows us to still use the misconfigured repository, at least as
long as we don't try to use its worktree.
This condition is handled in `setup_explicit_git_dir()`. In a subsequent
commit we'll refactor this function so that it doesn't receive a repo as
input anymore though, and consequently we cannot set the "bogus" bit
anymore.
Move the logic into `apply_repository_format()` instead to prepare for
this. While at it, fix up formatting a bit.
Note that this change requires us to also explicitly unset the value of
"core.worktree" in case we have the "GIT_WORK_TREE" environment variable
set. This is because the environment variable overrides the repository's
configuration, and we don't want to warn or die in case the work tree
has been configured explicitly regardless of whether or not "core.bare"
is set.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function `check_repository_format_gently()` receives a format as
input. An unknowing reader may thus suspect that this function actually
checks the passed-in format for consistency. While the function indeed
checks the repository format, it actually serves two purposes:
- It reads the repository's format and populates the passed-in format
with that information.
- It then indeed checks whether the format is consistent.
Rename the function to `read_and_verify_repository_format()` to clarify
its functionality. While at it, reorder the parameters so that the
format comes first to better match other functions that pass around the
format.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A write file stream resource leak has been fixed as part of a code
cleanup.
* jc/history-message-prep-fix:
history: streamline message preparation and plug file stream leak
The `reprepare()` callback for object database sources has been
generalized into a `prepare()` callback with an optional flush cache
flag, and a new `odb_prepare()` wrapper has been introduced to
allow pre-opening object database sources.
* ps/odb-generalize-prepare:
odb: introduce `odb_prepare()`
odb/source: generalize `reprepare()` callback
The lazy priority queue optimization pattern (deferring actual removal
in prio_queue_get() to allow get+put fusion) has been folded directly
into prio_queue itself, speeding up commit traversal workflows and
simplifying callers.
* kk/prio-queue-get-put-fusion:
prio-queue: fold lazy_queue into prio_queue for automatic get+put fusion
prio-queue: rename .nr to .nr_ and add accessor helpers
When 'git push origin/main' or 'git branch origin main' is run, the
command is now recognized as a potential typo, and advice has been
added to offer a typofix.
* hn/branch-push-slip-advice:
push: suggest <remote> <branch> for a slash slip
branch: suggest <remote>/<branch> on upstream slip
A memory leak in the '--base' handling of 'git format-patch' has been
plugged, and the leak-reporting of the test suite when running under a
TAP harness has been improved.
* jk/format-patch-leakfix:
format-patch: fix leak of rev_info in prepare_bases()
t: move LSan errors from stdout to stderr
Junio C Hamano