Once you resolved conflicts by "git add path", you cannot recreate the
conflicted state with "git checkout -m path", because you lost information
from higher stages in the index when you resolved them.
Since we record the necessary information in the resolve-undo index
extension these days, we can reproduce the unmerged state in the index and
check it out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the Porcelain level, operations such as merge that populate an
initially cleanly merged index with conflicted entries clear the
resolve-undo information upfront. Give scripted Porcelains a way
to do the same, by implementing "update-index --clear-resolve-info".
With this, a scripted Porcelain may "update-index --clear-resolve-info"
first and repeatedly run "update-index --cacheinfo" to stuff unmerged
entries to the index, to be resolved by the user with "git add" and
stuff.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure that resolving a failed merge with git add records
the conflicted state, committing the result keeps that state,
and checking out another commit clears the state.
"git ls-files" learns a new option --resolve-undo to show the
recorded information.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git svn gc will compress the unhandled.log files that git svn mkdirs reads,
causing git svn mkdirs to skip directory creation.
[ew: trivial whitespace cleanups]
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Robert Zeh <robert.a.zeh@gmail.com>
The human-readable author and committer name can be missing from
commits imported from foreign SCM interfaces. Make sure we parse
the "author" and "committer" line a bit more leniently and avoid
segfaulting by assuming the name always exists.
Signed-off-by: David Reiss <dreiss@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old function was incorrect; in some instances it marks a cherry picked
range as a merged branch (because of an incorrect assumption that
'rev-list COMMIT --not RANGE' would work). This is replaced with a
function which should detect them correctly, memoized to limit the expense
of dealing with branches with many cherry picks to one 'merge-base' call
per merge, per branch which used cherry picking.
Signed-off-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
SVN's list of commit ranges in mergeinfo tickets is inclusive, whereas
git commit ranges are exclusive on the left hand side. Also, the end
points of the commit ranges may not exist; they simply delineate
ranges of commits which may or may not exist. Fix these two mistakes.
Signed-off-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
As shown, git-svn has some problems; not all svn merges are correctly
detected, and cherry picks may incorrectly be detected as real merges.
These test cases will be marked as _success once the relevant fixes are in.
Signed-off-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
The "git svn gc" command creates and appends to unhandled.log.gz
files which should be parsed before the uncompressed
unhandled.log files.
Reported-by: Robert Zeh
Signed-off-by: Eric Wong <normalperson@yhbt.net>
If a command is run with an absolute path as a pathspec inside a bare
repository, e.g. "rev-list HEAD -- /home", the code tried to run strlen()
on NULL, which is the result of get_git_work_tree(), and segfaulted. It
should just fail instead.
Currently the function returns NULL even inside .git/ in a repository
with a work tree, but that is a separate issue.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parsing the config file, if there is a value that is
syntactically correct but unused, we generally ignore it.
This lets non-core porcelains store arbitrary information in
the config file, and it means that configuration files can
be shared between new and old versions of git (the old
versions might simply ignore certain configuration).
The one exception to this is color configuration; if we
encounter a color.{diff,branch,status}.$slot variable, we
die if it is not one of the recognized slots (presumably as
a safety valve for user misconfiguration). This behavior
has existed since 801235c (diff --color: use
$GIT_DIR/config, 2006-06-24), but hasn't yet caused a
problem. No porcelain has wanted to store extra colors, and
we once a color area (like color.diff) has been introduced,
we've never changed the set of color slots.
However, that changed recently with the addition of
color.diff.func. Now a user with color.diff.func in their
config can no longer freely switch between v1.6.6 and older
versions; the old versions will complain about the existence
of the variable.
This patch loosens the check to match the rest of
git-config; unknown color slots are simply ignored. This
doesn't fix this particular problem, as the older version
(without this patch) is the problem, but it at least
prevents it from happening again in the future.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This hook runs after "git fetch" in the repository the objects are
fetched from as the user who fetched, and has security implications.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 24ab81a fixed the deletion of empty files, but broke
deletion of non-empty files. The approach it took was to
factor out the "deleted" line from the patch header into its
own hunk, the same way we do for mode changes. However,
unlike mode changes, we only showed the special "delete this
file" hunk if there were no other hunks. Otherwise, the user
would annoyingly be presented with _two_ hunks: one for
deleting the file and one for deleting the content.
This meant that in the non-empty case, we forgot about the
deleted line entirely, and we submitted a bogus patch to
git-apply (with "/dev/null" as the destination file, but not
marked as a deletion).
Instead, this patch combines the file deletion hunk and the
content deletion hunk (if there is one) into a single
deletion hunk which is either staged or not.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also adds a test case for:
"git svn: Don't create empty directories whose parents were deleted"
which was the reason we found this bug in the first place.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The existing code checked to make sure we were not in a bare
repository when doing a hard reset. However, we should take
this one step further, and make sure we are in a worktree.
Otherwise, we can end up munging files inside of '.git'.
Furthermore, we should do the same check for --merge resets,
which have the same properties. Actually, a merge reset of
HEAD^ would already complain, since further down in the code
we want a worktree. However, it is nicer to check up-front;
then we are sure we cover all cases ("git reset --merge"
would run, even though it wasn't doing anything) and we can
give a more specific message.
Add tests to t7103 to cover these cases and some missing ones.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When loading a notes tree, the code primarily looks for SHA1-like paths
whose total length (discounting directory separators) are 40 chars
(interpreted as valid note entries) or less (interpreted as subtree
entries that may in turn contain note entries when unpacked).
However, there is an additional condition that must hold for valid
subtree entries: They must be _tree_ objects (duh).
This patch adds an appropriate test for this condition, thereby fixing
the crash that occured when passing a non-tree object to the tree-walk
API.
The patch also adds another selftest verifying correct behaviour of
non-notes in note trees.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '--no-chain-reply-to' option is a Getopt::Long boolean option. The
'--no-' prefix (as in --no-chain-reply-to) for boolean options is not
supported in Getopt::Long version 2.32 which was released with Perl 5.8.0.
This version only supports '--no' as in '--nochain-reply-to'. More recent
versions of Getopt::Long, such as version 2.34, support either prefix. So
use the older form in the tests.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some ancient platforms do not have an extensive list of alternate names for
character encodings. For example, Solaris 7 and IRIX 6.5 do not know that
ISO-8859-1 is the same as ISO8859-1. Modern platforms do know this, so use
the older name.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even if the user explicitly gave her own message to "git merge", the
command still added its standard merge message. It resulted in a
useless repetition like this:
% git merge -m "Merge early part of side branch" `git rev-parse side~2`
% git show -s
commit 37217141e7519629353738d5e4e677a15096206f
Merge: e68e646 a1d2374
Author: しらいし ななこ <nanako3@lavabit.com>
Date: Wed Dec 2 14:33:20 2009 +0900
Merge early part of side branch
Merge commit 'a1d2374f8f52f4e8a53171601a920b538a6cec23'
The gave her own message because she didn't want git to add the
standard message (if she wanted to, she wouldn't have given one,
or she would have prepared it using git-fmt-merge-msg command).
Noticed by Nanako Shiraishi
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were added without documentation in 2009-03-16 (6720721).
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed to allow test suite to run against a standard
install bin directory instead of GIT_EXEC_PATH.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed to allow the test suite to run against a standard
install bin directory instead of GIT_EXEC_PATH.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give a warning message when send-email uses chain-reply-to to thread the
messages because of the current default, not because the user explicitly
asked to, either from the command line or from the configuration.
This way, by the time 1.7.0 switches the default, everybody will be ready.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Inspired by the coloring of quilt.
Introduce a separate color and paint the hunk comment part, i.e. the name
of the function, in a separate color "diff.func" (defaults to plain).
Whitespace between hunk header and hunk comment is printed in plain color.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds the option to specify the envelope sender as "auto" which
would pick the 'from' address. This is good because now we can specify
the address only in one place in $HOME/.gitconfig and change it easily.
[jc: added tests]
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When emit_line() is called with an empty line (but non-zero length, as we
send line terminating LF or CRLF to the function), it used to emit
<SET><RESET> followed by a newline. Stop the wastefulness.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The patch structure has def_name component that is used to validate the
sanity of a "diff --git" patch by checking pathnames that appear on the
patch header lines for consistency. The git_header_name() function is
used to compute this out of "diff --git a/... b/..." line, but the code
always stripped one level of prefix (i.e. "a/" and "b/"), without paying
attention to -p<n> option. Code in find_name() function that parses other
lines in the patch header (e.g. "--- a/..." and "+++ b/..." lines) however
did strip the correct number of leading paths prefixes, and the sanity
check between these computed values failed.
Teach git_header_name() to honor -p<n> option like find_name() function
does.
Found and reported by Steven J. Murdoch who also wrote tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't take the author name information without re-encoding from the raw
commit object buffer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fourth test of show-branch in t1200 test was failing but only
sometimes. It only failed when two commits created in an earlier
test had different timestamps. When they were created within the
same second, the actual output matched the expected output.
Fix this by using test_tick to force reliable timestamps and update
the expected output so it does not to depend on the commits made in
the same sacond.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recognizing \r in a regex is something GNU sed will do, but other sed
implementation's won't (e.g. BSD sed on OS X). Instead of two sed
invocations, use a single Perl script to split output into headers
and body.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One test case used 'xargs test', which assumes that 'test' is available
as external program. At least on MinGW it is not.
Moreover, 'git format-patch' was invoked in a pipeline, but not as the
last command. Rewrite the test case to catch breakage in 'git format-patch'
as well.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since unhandled.log stores paths relative to the repository
root, we need to strip out leading path components if the
directories we're tracking are not the repository root.
Reported-by: Björn Steinbrink
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Add a new helper function, strbuf_add_indented_text(), to indent text
without a width limit, and call it from strbuf_add_wrapped_text(). It
respects both indent (applied to the first line) and indent2 (applied to
the rest of the lines); indent2 was ignored by the indent-only path of
strbuf_add_wrapped_text() before the patch.
Two simple test cases are added, one exercising strbuf_add_wrapped_text()
and the other strbuf_add_indented_text().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While we're at it, also unset GREP_COLOR and GREP_COLORS in case colouring
is not enabled, to be on the safe side. The presence of these variables
alone is not sufficient to trigger coloured output with GNU grep, but
other implementations may behave differently.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are rebasing we know that the header lines in the
patch are good and that we don't need to pick up any headers
from the body of the patch.
This makes it possible to rebase commits whose commit message
start with "From" or "Date".
Test vectors by Jeff King.
Signed-off-by: Lukas Sandström <luksan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This has the same effect as --no-replace-objects option; git ignores the
replace refs. When --no-replace-objects option is passed to git, this
environment variable is set to "1" and exported to subprocesses in order
to propagate the same setting.
It is useful for example for scripts, as the git commands used in them can
now be aware that they must not read replace refs.
Tested-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
4d23660 (describe: when failing, tell the user about options that
work, 2009-10-28) forgot to update the shortcut path where the code
detected and used a possible exact match. This means that an
unannotated tag on HEAD would be used by 'git describe'.
Guard this code path against the new circumstances, where unannotated
tags can be present in ->util even if we're not actually planning to
use them.
While there, also add some tests for --all.
Reported by 'yashi' on IRC.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The t/t9700/test.pl script uses method invocation syntax when
using the Cwd module to determine the current working directory.
This fails on cygwin, since cygwin perl specifically checks for
any arguments to the cwd() function and croak()'s with the message
"Usage: Cwd::cwd()". (In perl v5.8.8 distribution, see the file
perl-5.8.8/cygwin/cygwin.c lines 139-157)
In order to avoid the problem, we replace the method invocation
syntax with a simple function call.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some test scripts run Perl scripts as if they were git-* scripts, and
thus need to use the same perl that will be put in the shebang line of
git*.perl commands. $PERL_PATH therefore needs to be used instead of
a bare "perl".
The tests can fail if another perl is found in $PATH before the one
defined in $PERL_PATH.
Example test failure caused by this: the perl defined in $PERL_PATH has
Error.pm installed, and therefore the Git.pm's Makefile.PL doesn't install
the private copy. The perl from $PATH doesn't have Error.pm installed, and
all git*.perl scripts invoked during the test will fail loading Error.pm.
Makefile patch by Jeff King <peff@peff.net>.
Signed-off-by: Philippe Bruhat (BooK) <book@cpan.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests for --full-name, --full-tree, --abbrev, and --name-only.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep" currently an error when you combine the -F and -i flags.
This isn't in line with how GNU grep handles it.
This patch allows the simultaneous use of those flags.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Brian Collins <bricollins@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We parse unhandled.log files for empty_dir statements and make a
best effort attempt to recreate empty directories on fresh
clones and rebase. This should cover the majority of cases
where users work off a single branch or for projects where
branches do not differ in empty directories.
Since this cannot affect "normal" git commands like "checkout"
or "reset", so users switching between branches in a single
working directory should use the new "git svn mkdirs" command
after switching branches.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
In ref_remove_duplicates, when we encounter a duplicate and remove it
from the list we need to make sure that the prev pointer stays
pointing at the last entry and also skip over adding the just freed
entry to the string_list.
Previously fetch could crash with:
*** glibc detected *** git: corrupted double-linked list: ...
Also add a test to try and catch problems with duplicate removal in
the future.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit for:
git svn: read global+system config for clone+init
Initially lacked a test case because the author was unable to
reproduce it under his test environment, this adds it.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
When recording the revisions that it has merged, SVN sets the top
revision to be the latest revision in the repository, which is not
necessarily a revision on the branch that is being merged from. When
it is not on the branch, git-svn fails to add the extra parent to
represent the merge because it relies on finding the commit on the
branch that corresponds to the top of the SVN merge range.
In order to correctly handle this case, we look for the maximum
revision less than or equal to the top of the SVN merge range that is
actually on the branch being merged from.
[ew: This includes the following (squashed) commit to prevent
errors during bisect:]
Author: Toby Allsopp <toby.allsopp@navman.co.nz>
Date: Fri Nov 13 09:48:39 2009 +1300
git-svn: add (failing) test for SVN 1.5+ merge with intervening commit
This test exposes a bug in git-svn's handling of SVN 1.5+ mergeinfo
properties. The problematic case is when there is some commit on an
unrelated branch after the last commit on the merged-from branch.
When SVN records the mergeinfo property, it records the latest
revision in the whole repository, which, in the problematic case, is
not on the branch it is merging from.
To trigger the git-svn bug, we modify t9151 to include two SVN merges,
the second of which has an intervening commit. The SVN dump was
generated using SVN 1.6.6 (on Debian squeeze amd64).
Signed-off-by: Toby Allsopp <toby.allsopp@navman.co.nz>
Acked-by: Eric Wong <normalperson@yhbt.net>
Provide a DEFAULT_EDITOR knob to allow setting the fallback
editor to use instead of vi (when VISUAL, EDITOR, and GIT_EDITOR
are unset). The value can be set at build time according to a
system’s policy. For example, on Debian systems, the default
editor should be the 'editor' command.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano