* 'qq/maint' (early part):
git-svn.perl: workaround assertions in svn library 1.5.0
mailinfo: feed the correct line length to decode_transfer_encoding()
git-clone: remove leftover debugging fprintf().
Fix "config_error_nonbool" used with value instead of key
clone -q: honor "quiet" option over native transports.
attribute documentation: keep EXAMPLE at end
builtin-commit.c: Use 'git_config_string' to get 'commit.template'
http.c: Use 'git_config_string' to clean up SSL config.
diff.c: Use 'git_config_string' to get 'diff.external'
convert.c: Use 'git_config_string' to get 'smudge' and 'clean'
builtin-log.c: Use 'git_config_string' to get 'format.subjectprefix' and 'format.suffix'
Documentation cvs: Clarify when a bare repository is needed
Documentation: be precise about which date --pretty uses
With subversion 1.5.0 (C and perl libraries) the git-svn selftest
t9101-git-svn-props.sh fails at test 25 and 26. The following commands
cause assertions in the svn library
$ cd deeply
$ git-svn propget svn:ignore .
perl: /build/buildd/subversion-1.5.0dfsg1/subversion/libsvn_ra/ra_loader.c:674: svn_ra_get_dir: Assertion `*path != '/'' failed.
Aborted
$ git-svn propget svn:ignore ..
perl: /build/buildd/subversion-1.5.0dfsg1/subversion/libsvn_subr/path.c:120: svn_path_join: Assertion `is_canonical(component, clen)' failed.
With this commit, git-svn makes sure the path doesn't start with a
slash, and is not a dot, working around these assertions.
The breakage was reported by Lucas Nussbaum through
http://bugs.debian.org/489108
Signed-off-by: Gerrit Pape <pape@smarden.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* dr/ceiling:
Eliminate an unnecessary chdir("..")
Add support for GIT_CEILING_DIRECTORIES
Fold test-absolute-path into test-path-utils
Implement normalize_absolute_path
Conflicts:
cache.h
setup.c
When handling a MIME multipart message, multi-part boundary lines are eaten
by a call to handle_boundary() function from the main loop of handle_body(),
and after that happens, we should update the line length correctly, because
handle_boundary() udpates line[] with new data.
This was caused by a thinko in 9aa2309 (mailinfo: apply the same fix not
to lose NULs in BASE64 and QP codepaths, 2008-05-25).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signal handlers should never call syslog(), as that can raise signals
of its own.
Instead, call the syslog() from the master process.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://repo.or.cz/git-gui:
git-gui: Implement "Stage/Unstage Line"
git-gui: Don't select the wrong file if the last listed file is staged.
git-gui: Fix accidental staged state toggle when clicking top pixel row
git-gui: Move on to the next filename after staging/unstaging a change
This is not just nice but necessary since git-frotz is no longer in
PATH.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check the exit code of the first hg command, and abort to avoid a later
ValueError exception.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes the following warning:
hg-to-git.py:92: DeprecationWarning: raising a string exception is deprecated
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old text stated that 'git-frotz' can be always used instead of 'git
frotz' which is no longer true.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function "config_error_nonbool", that is defined in "config.c",
is used to report an error when a config key in the config file
should have a corresponding value but it hasn't.
So the parameter to this function should be the key and not the
value, because the value is undefined. And it could crash if the
value is used.
This patches fixes two occurences where the value was passed
instead of the key.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function "config_error_nonbool", that is defined in "config.c",
is used to report an error when a config key in the config file
should have a corresponding value but it hasn't.
So the parameter to this function should be the key and not the
value, because the value is undefined. And it could crash if the
value is used.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* qq/maint:
clone -q: honor "quiet" option over native transports.
attribute documentation: keep EXAMPLE at end
builtin-commit.c: Use 'git_config_string' to get 'commit.template'
http.c: Use 'git_config_string' to clean up SSL config.
diff.c: Use 'git_config_string' to get 'diff.external'
convert.c: Use 'git_config_string' to get 'smudge' and 'clean'
builtin-log.c: Use 'git_config_string' to get 'format.subjectprefix' and 'format.suffix'
Documentation cvs: Clarify when a bare repository is needed
Documentation: be precise about which date --pretty uses
Conflicts:
Documentation/gitattributes.txt
The earlier built-in conversion seems to have broken "git-clone"; this
teaches the command to honor the "-q" option again when talking to the
remote end over native transports (file://, git:// and ssh://).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The document gives overall definition of states in DESCRIPTION, describes
various aspects of git operations that can be influenced in EFFECTS, and
finally gives examples in the EXAMPLE section. Archive creation however
was somehow documented after the EXAMPLE section, not insode EFFECTS.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New users sometimes import a project and then immediately
try to use the imported repository as a central shared repository.
This provides pointers about setting up a bare repository for that
in the parts of the documentation dealing with CVS migration.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reading rev-list parameters from the command line can be reused by
commands other than rev-list. Move this function to more "library-ish"
place to promote code reuse.
Signed-off-by: Adam Brewster <asb@bu.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When printing valuds of type uint32_t, we should use PRIu32, and should
not assume that it is unsigned int. On 32-bit platforms, it could be
defined as unsigned long. The same caution applies to ntohl().
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it explicit that the --pretty formats 'medium' and 'email' use the
author date (and ignore the committer date).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I think that some of these uses of italics were meant to be
rendered in quotation marks, anyway.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Italicize those git subcommand names already in teletype we missed.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some manual pages use teletype font to set command names. We
change them to use italics, instead. This creates a visual
distinction between names of commands and command lines that
can be typed at the command line. It is also more consistent
with other man pages outside Git.
In this patch, the commands named are non-git commands like bash.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name `gitk` is sometimes meant to be entered at the command
prompt, but most uses are just referring to the program with that
name (not the incantation to start it).
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This includes nongit commands like RCS 'merge'. This patch only
italicizes names of commands if they had no formatting before.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To tell command names from options in a glance.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The phrase "diff outputs" sounds awkward to my ear (I think
"output" is meant to be used as a substantive noun.)
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With git-commands moving out of $(bindir), it is useful to make a
clearer distinction between the git subcommand 'git-whatever' and
the command you type, `git whatever <options>`. So we use a dash
after "git" when referring to the former and not the latter.
I already sent a patch doing this same thing, but I missed some
spots.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The intent is to make git-commit(1) feel more like a manual page. The
change also makes the page four words shorter.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano