"git log --follow" has been updated to handle non-linear history, in
which the path being tracked gets renamed differently in multiple
history lines, better.
* mv/log-follow-mergy:
log: improve --follow following renames for non-linear history
The display of the rebase todo list in "git status" has been
improved to correctly abbreviate object IDs for more commands and
avoid misinterpreting refs as object IDs.
* pw/status-rebase-todo:
status: improve rebase todo list parsing
sequencer: factor out parsing of todo commands
The pack-objects command now supports using reachability bitmaps and
delta-islands concurrently with the `--path-walk` option, allowing
faster packaging by falling back to path-walk when bitmaps cannot
fully satisfy the request.
* tb/pack-path-walk-bitmap-delta-islands:
pack-objects: support `--delta-islands` with `--path-walk`
pack-objects: extract `record_tree_depth()` helper
pack-objects: support reachability bitmaps with `--path-walk`
t/perf: drop p5311's lookup-table permutation
The documentation in SubmittingPatches has been updated to clarify how
patch contributors should respond to design and viability critiques,
and how the resolution of such critiques should be recorded in the
final commit messages.
* jc/submittingpatches-design-critiques:
SubmittingPatches: address design critiques
Xcode 15 and later has a linker set to complain when the same library
archive is listed twice on the command line. Squelch the annoyance.
* hn/macos-linker-warning:
config.mak.uname: avoid macOS dup-library warning
Wean the Windows builds in GitLab CI procedure away from
(unfortunately unreliable) Chocolatey to install dependencies.
* ps/gitlab-ci-windows:
gitlab-ci: migrate Windows builds away from Chocolatey
Xcode 15 and later has a linker set to complain when the same library
archive is listed twice on the command line. Squelch the annoyance.
* hn/macos-linker-warning:
config.mak.uname: avoid macOS dup-library warning
The trailer sections in SubmittingPatches have been updated to
encourage use of standard trailers.
* kh/submittingpatches-trailers:
SubmittingPatches: note that trailer order matters
SubmittingPatches: be consistent with trailer markup
SubmittingPatches: document Based-on-patch-by trailer
SubmittingPatches: discourage common Linux trailers
SubmittingPatches: encourage trailer use for substantial help
The `fetch.followRemoteHEAD` configuration variable has been added to
provide a default for the per-remote `remote.<name>.followRemoteHEAD`
setting.
* mh/fetch-follow-remote-head-config:
fetch: fixup a misaligned comment
fetch: add configuration variable fetch.followRemoteHEAD
fetch: refactor do_fetch handling of followRemoteHEAD
fetch: return 0 on known git_fetch_config
fetch: rename function report_set_head
t5510: cleanup remote in followRemoteHEAD dangling ref test
doc: explain fetchRemoteHEADWarn advice
fetch: fixup set_head advice for warn-if-not-branch
Wean the Windows builds in GitLab CI procedure away from
(unfortunately unreliable) Chocolatey to install dependencies.
* ps/gitlab-ci-windows:
gitlab-ci: migrate Windows builds away from Chocolatey
When there is rebase in progress "git status" displays the last couple
of completed and the next couple of pending commands from the todo
list. When it does this it tries to abbreviate the object ids of
the commits to be picked. Unfortunately it does not abbreviate the
object ids when the line starts with "fixup -C" or "merge -C". It
also mistakenly replaces the refname in "reset main" and "update-ref
refs/heads/main" with the object id that the ref points to.
Fix this by using the function added in the last commit to parse the
command name and only try to abbreviate the argument for commands that
take an object id. If a command accepts a label then try to resolve the
object name as a label first and only if that fails try to resolve it
as an object_id. When trying to abbreviate an object id, only replace
the object name if it starts with the abbreviated object id so that
tag or branch names that contain only hex digits are left unchanged.
Comments are now processed after stripping any leading
whitespace from the line. This matches what the sequencer does in
parse_insn_line(). The existing test cases are updated to test a
wider variety of commands. Only the pending commands in the tests
are changed to avoid removing existing coverage.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the code that parses todo commands into a separate function so
that it can be shared with "git status" in the next commit. As we
know the input is NUL terminated we do not pass a pointer to the end
of the line and instead test for a blank line by looking for NUL, CR
LF, or LF. We use starts_with() instead of starts_with_mem() for the
same reason. This results in slightly different behavior when there
a CR at the start of the line that is not followed by LF. Previously
such a line was treated as a comment rather than an invalid line.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `__MINGW64__` constant is defined, surprise, surprise, only when
building for a 64-bit CPU architecture.
Therefore using it as a guard to define `_POSIX_C_SOURCE` (so that
`localtime_r()` is declared, among other functions) is not enough, we
also need to check `__MINGW32__`.
Technically, the latter constant is defined even for 64-bit builds. But
let's make things a bit easier to understand by testing for both
constants.
Making it so fixes this compile warning (turned error in GCC v14.1):
archive-zip.c: In function 'dos_time':
archive-zip.c:612:9: error: implicit declaration of function 'localtime_r';
did you mean 'localtime_s'? [-Wimplicit-function-declaration]
612 | localtime_r(&time, &tm);
| ^~~~~~~~~~~
| localtime_s
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Have a repo with a subtree merge, do a 'git log --follow prefix/test.c',
the output only contains history in the outer repo, not commits that
were merged via a subtree merge.
What happens is that 'git log --follow' stores the followed path only in
opt->diffopt.pathspec, so in case the commit history is non-linear, and
multiple parents have renames to the followed path, then the end result
isn't really defined: the first commit that happens to be visited in one
of the parents update opt->diffopt.pathspec, and from that point, only
that updated path is visited.
Fix the problem by introducing a commit -> path map
(follow_pathspec_slab) that stores what will be a path to follow when
visiting that parent. At the top of log_tree_commit(), if the slab has
an entry for this commit, we replace opt->diffopt.pathspec with a path
from this entry, so the correct path is followed, even if an unrelated
sub-tree changed the path to be followed to something else. After
log_tree_diff() runs, we record each parent's path in the slab. As a
result, the walk order doesn't matter, which was exactly the source of
problems previously.
This helps with subtree merges (rename happens inside the merge commit),
but also fixes the general case when the rename happens in the history
of parents, not in the merge commit itself.
Signed-off-by: Miklos Vajna <vmiklos@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support for hashing loose or packed objects larger than 4GB on Windows
and other LLP64 platforms has been improved by converting object header
buffers and data-handling functions from 'unsigned long' to 'size_t'.
* po/hash-object-size-t:
hash-object: add a >4GB/LLP64 test case using filtered input
hash-object: add another >4GB/LLP64 test case
hash-object --stdin: verify that it works with >4GB/LLP64
hash algorithms: use size_t for section lengths
object-file.c: use size_t for header lengths
hash-object: demonstrate a >4GB/LLP64 problem
* js/objects-larger-than-4gb-on-windows-more:
odb: use size_t for object_info.sizep and the size APIs
packfile,delta: drop the `cast_size_t_to_ulong()` wrappers
pack-objects: use size_t for in-core object sizes
packfile: widen unpack_entry()'s size out-parameter to size_t
pack-objects(check_pack_inflate()): use size_t instead of unsigned long
patch-delta: use size_t for sizes
compat/msvc: use _chsize_s for ftruncate
Since the inception of `--path-walk`, this option has had a documented
incompatibility with `--delta-islands`.
When discussing those original patches on the list, a message from
Stolee in [1] noted the following:
this could be remedied by [...] doing a separate walk to identify
islands using the normal method
In a related portion of the thread, Peff explains[2]:
The delta islands code already does its own tree walk to propagate
the bits down (it does rely on the base walk's show_commit() to
propagate through the commits).
Once each object has its island bitmaps, I think however you
choose to come up with delta candidates [...] you should be able
to use it. It's fundamentally just answering the question of "am
I allowed to delta between these two objects".
That is similar to what this patch does, and it turns out the cheaper
option is sufficient: perform the same island side effects from the
path-walk callback rather than doing a second walk.
Recall how delta-islands are computed during a normal repack:
- `show_commit()` calls `propagate_island_marks()` for each commit,
which merges the commit's island bitset onto its root tree object and
onto each of its parent commits.
- `show_object()` for a tree records the tree's depth derived from the
slash-separated pathname. Subsequent `resolve_tree_islands()` uses
that depth to walk trees in increasing-depth order, propagating each
tree's marks to its children.
- At delta-search time, `in_same_island()` enforces that a delta
target's island bitmap is a subset of its base's: every island that
reaches the target must also reach the base.
Path-walk's enumeration callback is `add_objects_by_path()`. It already
adds objects to `to_pack`, but until now did not perform the
island-related side effects. Two things are needed:
- For each commit batch, call `propagate_island_marks()` on commits,
exactly as `show_commit()` does.
We have to be careful about the order in which we call this function,
and we must see a commit before its parents in order to have
island marks to propagate.
The path-walk batch preserves that order. Path-walk appends commits
to its `OBJ_COMMIT` batch as they come back from the same
`get_revision()` loop the regular traversal uses, and
`add_objects_by_path()` iterates the batch in array order. So every
commit reaches `propagate_island_marks()` in the same sequence that
`show_commit()` would have seen it, and the descendant-first chain
that the algorithm relies on is intact.
Skip island propagation for excluded commits to match the regular
traversal, whose `show_commit()` callback is only invoked for
interesting commits. Boundary commits may still be present in
path-walk's callback so they can serve as thin-pack bases, but they
should not contribute island marks.
- For each tree batch, record the tree's depth from the path. Use the
`record_tree_depth()` helper from the previous commit so both
callbacks behave identically, including the max-depth-wins behavior
when a tree is reached via more than one path. The helper accepts
both the `show_object()` path shape ("foo", "foo/bar") and the
path-walk shape with a trailing slash ("foo/", "foo/bar/"), so depths
recorded from either traversal mode are directly comparable.
This is implicit in the implementation sketch from Peff above.
`resolve_tree_islands()` sorts trees by `oe->tree_depth` in
increasing-depth order before propagating marks down, so that a
parent tree's marks are finalized before its children inherit them.
Without recording the depth at path-walk time, every
path-walk-discovered tree would land at depth 0 in `to_pack`, the
sort would lose its ordering, and children could inherit marks from
parents whose own contributions had not yet been merged in.
With those two pieces in place, `resolve_tree_islands()` receives the
same island inputs from path-walk as it would from the regular
traversal, so the existing island checks can be reused unchanged.
Drop the documented incompatibility between `--path-walk` and
`--delta-islands`, and add t5320 coverage for path-walk island repacks
with and without bitmap writing, as well as the same-island case where a
delta remains allowed.
[1]: https://lore.kernel.org/git/9aa2471b-0850-4707-9733-d3b33609f5f2@gmail.com/
[2]: https://lore.kernel.org/git/20240911063203.GA1538586@coredump.intra.peff.net/
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare for a subsequent change that needs to record tree depths from a
second call site by factoring the delta-islands tree-depth bookkeeping
out of `show_object()` and into a helper, `record_tree_depth()`.
The helper looks up the object in `to_pack`, returns early when the
object was not added there, computes the depth from the slash count in
the supplied name, and preserves the existing max-depth-wins behavior
when a tree is reached by more than one path.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'pack-objects' is invoked with '--path-walk', it prevents us from
using reachability bitmaps.
This behavior dates back to 70664d2865 (pack-objects: add --path-walk
option, 2025-05-16), which included a comment in the relevant portion of
the command-line arguments handling that read as follows:
/*
* We must disable the bitmaps because we are removing
* the --objects / --objects-edge[-aggressive] options.
*/
In fb2c309b7d3 (pack-objects: pass --objects with --path-walk,
2026-05-02), path-walk learned to pass '--objects' again, but still
kept bitmap traversal disabled. That leaves two useful cases
unsupported:
* A path-walk repack that writes bitmaps does not give the bitmap
selector any commits, because path-walk reveals commits through
`add_objects_by_path()` rather than through `show_commit()`, where
`index_commit_for_bitmap()` is normally called.
* An invocation like "git pack-objects --use-bitmap-index --path-walk"
never tries an existing bitmap, even when one is available and could
answer the request.
Fortunately for us, neither restriction is required.
* On the writing side: teach the path-walk object callback to call
`index_commit_for_bitmap()` for commits that it adds to the pack.
That gives the bitmap selector the commit candidates it would have
seen from the regular traversal.
* For bitmap reading, keep passing '--objects' to the internal rev_list
machinery, but stop clearing `use_bitmap_index`. If an existing
bitmap can answer the request, use it; otherwise fall back to
path-walk's own enumeration.
As a result, we can see significantly reduced pack generation times from
p5311 (with our `GIT_PERF_REPO` set to a recent clone of the fluentui
repository) before this commit:
Test HEAD^ HEAD
----------------------------------------------------------------------------------------
5311.40: server (1 days, --path-walk) 1.43(1.39+0.04) 0.01(0.01+0.00) -99.3%
5311.41: size (1 days, --path-walk) 139.6K 139.7K +0.0%
5311.42: client (1 days, --path-walk) 0.02(0.02+0.00) 0.02(0.02+0.00) +0.0%
5311.44: server (2 days, --path-walk) 1.43(1.39+0.04) 0.01(0.00+0.00) -99.3%
5311.45: size (2 days, --path-walk) 139.6K 139.7K +0.0%
5311.46: client (2 days, --path-walk) 0.02(0.02+0.00) 0.02(0.02+0.00) +0.0%
5311.48: server (4 days, --path-walk) 1.44(1.39+0.04) 0.01(0.01+0.00) -99.3%
5311.49: size (4 days, --path-walk) 238.1K 238.1K +0.0%
5311.50: client (4 days, --path-walk) 0.03(0.03+0.00) 0.03(0.03+0.00) +0.0%
5311.52: server (8 days, --path-walk) 1.43(1.39+0.03) 0.01(0.00+0.00) -99.3%
5311.53: size (8 days, --path-walk) 344.9K 344.9K +0.0%
5311.54: client (8 days, --path-walk) 0.07(0.07+0.00) 0.07(0.08+0.00) +0.0%
5311.56: server (16 days, --path-walk) 1.47(1.44+0.03) 0.10(0.08+0.01) -93.2%
5311.57: size (16 days, --path-walk) 844.0K 844.0K +0.0%
5311.58: client (16 days, --path-walk) 0.09(0.09+0.00) 0.09(0.09+0.00) +0.0%
5311.60: server (32 days, --path-walk) 1.52(1.50+0.05) 0.14(0.15+0.02) -90.8%
5311.61: size (32 days, --path-walk) 4.2M 4.2M +0.1%
5311.62: client (32 days, --path-walk) 0.34(0.48+0.02) 0.34(0.45+0.05) +0.0%
5311.64: server (64 days, --path-walk) 1.55(1.52+0.06) 0.15(0.15+0.04) -90.3%
5311.65: size (64 days, --path-walk) 6.4M 6.4M -0.0%
5311.66: client (64 days, --path-walk) 0.51(0.79+0.05) 0.51(0.80+0.06) +0.0%
5311.68: server (128 days, --path-walk) 1.59(1.57+0.06) 0.16(0.21+0.01) -89.9%
5311.69: size (128 days, --path-walk) 8.4M 8.4M -0.0%
5311.70: client (128 days, --path-walk) 0.72(1.44+0.08) 0.71(1.47+0.09) -1.4%
We get the same size of output pack, but this commit allows us to do so
in a significantly shorter amount of time. Intuitively, we're generating
the same pack (hence the unchanged 'test_size' output from run to run),
but varying how we get there. Before this commit, pack-objects prefers
'--path-walk' to '--use-bitmap-index', so we generate the output pack by
performing a normal '--path-walk' traversal. With this commit, we are
operating over a *repacked* state (that itself was done with a
'--path-walk' traversal), but are able to perform pack-reuse on that
repacked state via bitmaps.
When comparing the size of the repacked pack with/without '--path-walk'
on the previous commit versus this one, we see that (a) the repacked size
improves significantly with '--path-walk', and that (b) writing bitmaps
during repacking does not regress this improvement:
Test HEAD^ HEAD
----------------------------------------------------------------------------------------
5311.3: size of bitmapped pack 558.4M 558.5M +0.0%
5311.38: size of bitmapped pack (--path-walk) 164.4M 164.4M +0.0%
(Note that to observe an improvement here, we must repack with '-F' in
order to avoid reusing non-'--path-walk' deltas, which would otherwise
skew our results.)
There is one wrinkle when it comes to '--boundary', which we must not
pass into the bitmap walk in the presence of both '--path-walk' and
'--use-bitmap-index'. Path-walk needs boundary commits when it performs
its own traversal, in order to discover bases for thin packs, but the
bitmap traversal does not expect this. Work around this by setting
`revs->boundary` as late as possible within the '--path-walk' traversal,
after any bitmap attempt has either succeeded or declined to answer the
request.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
p5311 measures the cost of serving a fetch from a bitmapped pack and
indexing the resulting pack on the client. Since 761416ef91
(bitmap-lookup-table: add performance tests for lookup table,
2022-08-14), p5311 effectively runs itself twice: once with the bitmap's
lookup table extension enabled, and again with it disabled.
This comparison has served its useful purpose, as the lookup table is
almost four years old, and the de-facto default in server-side Git
deployments.
A following commit will want to test a different combination (repacking
with and without '--path-walk' instead of the lookup table). Instead of
multiplying the current test count by two again to produce four
variations of `test_fetch_bitmaps()`, drop the lookup table option to
reduce the number of perf tests we run. Retain `test_fetch_bitmaps()`
itself, since we will use this in the future for the new
parameterization.
(As an aside, a future commit outside of this series will adjust the
default value of 'pack.writeBitmapLookupTable' to "true", matching the
de-facto norm for deployments where the existence of bitmap lookup
tables is meaningful. Punt on that to a later series and instead make
the minimal change for now.)
Suggested-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Contributors sometimes fail to answer fundamental design or
viability comments from reviewers and submit subsequent rounds
without addressing them. When design decisions are resolved on the
mailing list, the final justification should be recorded in the
commit messages.
Instruct authors to be particularly mindful of critiques regarding
high-level design or viability, to defend their choices on the list,
and to accompany new iterations with clearer explanations in the cover
letter, responses, and revised commit messages. Also instruct them to
explicitly document the resolution of these concerns in the commit
message body to keep the historical record complete.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The global configuration variables protect_hfs and protect_ntfs have
been migrated into struct repo_config_values to tie them to
per-repository configuration state.
* ty/move-protect-hfs-ntfs:
environment: use 'repo->initialized' for repo_protect_hfs() and repo_protect_ntfs()
To match how we refrain from calling repo_config_values() on an
uninitialized instance of a repository object in other two topics
that deal with ignore_case and trust_executable_bit, check the
repo->initialized bit instead of the repo->gitdir member.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Ayush Chandekar <ayu.chandekar@gmail.com>
Mentored-by: Olamide Caleb Bello <belkid98@gmail.com>
Signed-off-by: Tian Yuchen <cat@malon.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Building on macOS with Xcode 15 or newer emits:
ld: warning: ignoring duplicate libraries: 'libgit.a',
'target/release/libgitcore.a'
Some link recipes list the same archive twice, which is harmless.
Quiet the warning instead.
Pass -Wl,-no_warn_duplicate_libraries on Xcode 15 and newer, whose
linkers added both the warning and the suppression flag (ld64-907
and dyld-1009). Earlier linkers reject the flag, so gate on the
linker version. Broaden the existing -fno-common version probe to
also match the "ld64-NNN" and "dyld-NNN" forms Xcode 15 reports.
Signed-off-by: Harald Nordgren <haraldnordgren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The packed object source has been refactored into a proper struct
odb_source.
* ps/odb-source-packed:
odb/source-packed: drop pointer to "files" parent source
midx: refactor interfaces to work on "packed" source
odb/source-packed: stub out remaining functions
odb/source-packed: wire up `freshen_object()` callback
odb/source-packed: wire up `find_abbrev_len()` callback
odb/source-packed: wire up `count_objects()` callback
odb/source-packed: wire up `for_each_object()` callback
odb/source-packed: wire up `read_object_stream()` callback
odb/source-packed: wire up `read_object_info()` callback
packfile: use higher-level interface to implement `has_object_pack()`
odb/source-packed: wire up `reprepare()` callback
odb/source-packed: wire up `close()` callback
odb/source-packed: start converting to a proper `struct odb_source`
odb/source-packed: store pointer to "files" instead of generic source
packfile: move packed source into "odb/" subsystem
packfile: split out packfile list logic
packfile: rename `struct packfile_store` to `odb_source_packed`
Commands that list branches and tags (like git branch and git tag)
have been optimized to pass the namespace prefix when initializing
their ref iterator, avoiding a loose-ref scaling regression in
repositories with many unrelated loose references.
* td/ref-filter-restore-prefix-iteration:
ref-filter: restore prefix-scoped iteration
A hotfix to an earlier attempt to update code paths that assumed
"unsigned long" was long enough for "size_t".
* js/objects-larger-than-4gb-on-windows:
zlib: properly clamp to uLong
'fetch.followRemoteHEAD' is added as a generic setting used by all
remotes for which 'remote.<name>.followRemoteHEAD' is undefined. If
both variables are undefined, a builtin default of "create" is in
effect, matching the previous behavior.
As mentioned in the previous patch, 'fetch.followRemoteHEAD' supports
all of the values that its 'remote' counterpart does _except_
warn-if-not-$branch, due to its tighter coupling to individual remote
repositories.
This setting interacts with the do_fetch mechanism in the same way as
the previous does, but there are opportunities for improved
user-experience discussed in [1]. See the included NEEDSWORK comment as
well.
Documentation and advice messages for both of the followRemoteHEAD
variables are reworded to better capture the relationship between the
two.
The added tests assert feature parity between the two followRemoteHEAD
variables, as well as the fact that 'remote.<name>.followRemoteHEAD'
always supersedes this new configurable default.
[1]: https://lore.kernel.org/git/xmqqh5n213bw.fsf@gitster.g/
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Matt Hunter <m@lfurio.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update enum follow_remote_head_settings to include the value
FOLLOW_REMOTE_UNCONFIGURED as the new zero-initialized value for
followRemoteHEAD. This will allow us to distinguish between the
variable being unset vs. explicitly set to 'create', which is ultimately
the system default. The unnecessary indentation is removed.
The do_fetch function is likewise updated to perform its own decision
making to determine the effective followRemoteHEAD mode, falling back to
the system default if necessary. This will enable the next patch to
introduce a user-configurable default.
Function set_head now accepts the mode as an argument rather than only
considering the value defined by the remote.
The use of the 'warn-if-not-$branch' value is awkward in the context of
a global default, since the branches will differ between individual
remotes. For this reason, it's left out of this scheme and handling of
the no_warn_branch variable is untouched. Since a remote-specific
value for followRemoteHEAD takes priority, we can assume that if
remote->no_warn_branch is set, then the remote is also asserting
FOLLOW_REMOTE_WARN as the effective operating mode, and it will be
honored by do_fetch.
Signed-off-by: Matt Hunter <m@lfurio.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git config callback for git-fetch should only forward calls to
git_default_config when an unknown key is given. Prevent this in the
case of 'fetch.output' by returning '0', as the other known keys do.
Signed-off-by: Matt Hunter <m@lfurio.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update to the slightly more obvious name 'warn_set_head', which matches
the verbiage of the followRemoteHEAD options.
Signed-off-by: Matt Hunter <m@lfurio.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A later patch will introduce a new test which closely mirrors this one.
Update this test to remove the 'custom-head' remote it creates.
Otherwise, the two tests will conflict with each other, as the second
one to execute will fail to create this remote (which already exists,
thanks to the first test).
Signed-off-by: Matt Hunter <m@lfurio.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user sets 'remote.<name>.followRemoteHEAD' to
'warn[-if-not-$branch]', git-fetch will report when a fetched HEAD
disagrees with the locally-configured remote's HEAD. This additional
advice instructs the user how to deal with these warnings, but was
previously undocumented in git-config.
Signed-off-by: Matt Hunter <m@lfurio.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Specifying the word 'branch' in the command is not correct - a mismatch
with both the implementation in remote.c and the documentation.
Signed-off-by: Matt Hunter <m@lfurio.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It matters where you put new trailers: they should be added in
chronological order, and each person who passes on a patch should add
their s-o-b last. You are signing off on the patch as well as the whole
message up to that point.
This also makes it clear who added what:
Acked-by: The Reviewer <r@example.org>
Signed-off-by: The Contributor <c@example.org>
Acked-by: The (Late) Reviewer <late@example.org>
Signed-off-by: The Maintainer <m@example.org>
The first ack was added by the contributor and the second one was added
by the maintainer.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rest of this section and (most importantly) the list has decided to
use `<key>:`. So let’s use backticks (`) and a colon (:) throughout the
document.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This trailer comes up often enough and the use case is not fully covered
by the other trailers here. For example, it is sometimes better to use
this trailer instead of `Co-authored-by:`.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Linux Kernel regularly uses trailers (or “tags”) `Fixes` and
`Link`. Sometimes people submit patches to this project with them.
They have their use in that project but it is not clear what purpose
they would serve here.
For `Fixes`: Linux has many trees, and applying patches with
cherry-picks is common. A `Fixes` trailer in commit C2 pointing to
commit C1 helps the cherry-picker figure out that she probably needs
C2 if she wants to apply C1. See linux/d5d6281a (checkpatch: check for
missing Fixes tags, 2024-06-11):[1]
Why are stable patches encouraged to have a fixes tag? Some people
mark their stable patches as "# 5.10" etc. This is useful but a
Fixes tag is still a good idea. For example, the Fixes tag helps in
review. It helps people to not cherry-pick buggy patches without
also cherry-picking the fix.
In contrast the Git project has few trees (to my knowledge), and there
is much less need to cherry-pick fixes as opposed to either using
backmerges or rebasing all of the downstream tree’s commits on top of
git.git `master` from time to time.
This project does regularly mention what commits a patch/commit fixes,
but that is done inline in the commit message proper (cf. the trailer
block of the message).
For `Link`: These are used both to link back to the patch submission as
well as with footnotes. In contrast this project has `refs/notes/amlog`
for linking back to the patch submissions, and footnotes are only used
in the commit message proper.
† 1: Commit linux/d5d6281a has “linux” in front of it since this commit
is from the Linux Kernel, not Git. Example of a Linux tree—as well
as an example of `Link`—is [2].
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/ [2]
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Trailers beyond the mandatory s-o-b are regularly used based on my
last two years of reading the mailing list. Moreover, reviewers might
encourage it.[1]
This is also in line with the project crediting both commit authors and
people mentioned in trailers each release; “Nobody is THE one making
contribution”.[2]
Adding trailers is already encouraged, but in the section `send-patches`.
Let’s replace “If you like” with outright encouragement in this section
so that all trailer discussion (except s-o-b; see `sign-off` section) is
contained in this section; a link to from `send-patches` makes this
information equally visible.
Now we need to make a heading for `commit-trailers` in order for the
HTML output to make sense.
At the same time, it is important to temper this recommendation to a
significant enough contribution; in my experience beginners can be eager
to add a trailer for everyone who replies with an action point that is
followed up on.
Let’s also spell out that these trailers should follow the Git author/
committer format. One might naturally just write the name, but in that
case it will not be picked up by:
git shortlog --group=trailer:<key>
and normalization via `.mailmap` will not work.
Also introduce the list of common trailers as such. Granted, this is
already implied by the later paragraph about “create your own trailer”,
so this just frontloads this information.
† 1: https://lore.kernel.org/git/CAP8UFD0POvYDgGtEx8GBhvKkd8XzzWQsy8XxAKL9M3+uz3ka+w@mail.gmail.com/#:~:text=for%20at%20least
† 2: https://lore.kernel.org/git/xmqqzh248sy0.fsf@gitster.c.googlers.com/
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/objects-larger-than-4gb-on-windows-more:
odb: use size_t for object_info.sizep and the size APIs
packfile,delta: drop the `cast_size_t_to_ulong()` wrappers
pack-objects: use size_t for in-core object sizes
packfile: widen unpack_entry()'s size out-parameter to size_t
pack-objects(check_pack_inflate()): use size_t instead of unsigned long
patch-delta: use size_t for sizes
compat/msvc: use _chsize_s for ftruncate
A hotfix to an earlier attempt to update code paths that assumed
"unsigned long" was long enough for "size_t".
* js/objects-larger-than-4gb-on-windows:
zlib: properly clamp to uLong
Junio C Hamano