We need to sanitize @to as well to ensure that names are properly quoted.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If your normal user is not the same user you are subscribed to a list with,
then the default envelope sender used will cause your messages to bounce or
silently vanish into the ether.
This patch provides an optional parameter to set the envelope sender.
To use it with the sendmail binary, you must have privileges to use the -f
parameter!
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Always pass in clean addresses to Net::SMTP for the MAIL FROM, and use them on
the SMTP non-quiet output as well.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Ensure that @recipients is only raw addresses when it is handed to the sendmail
binary OR Net::SMTP, otherwise BCC cases might get an extra <, or wierd stuff
might be passed to the exec.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Always perform quoting of the recipient names if they contain periods,
previously only the author's address was treated this way. This stops sendmail
binaries from exploding the name into bad addresses.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
$cc is only used inside the send_message scope, so lets clean it out of the global scope.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The debug output is much more helpful if it has the parameters that were used.
Pull the sendmail parameters into a seperate array for that, and also include
similar data during the Net::SMTP case.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
While doing testing, it's useful to see that a dry run was actually done,
instead of a real one.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Looks like --dry-run was added to the code, but never to the --help output.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The number of characters in a line MUST be no more than 998 characters,
and SHOULD be no more than 78 characters (RFC2822).
It is much safer to fold the header by ourselves.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In the Linux kernel, for example, it's common to include Cc: lines
for cases when you want to remember to cc someone on a patch without
necessarily claiming they signed off on it. Make git-send-email
aware of these.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Chain-reply-to is a personal perference, and is unlikely to change from
patchset to patchset. Similarly, bcc is likely to have the same values
every invocation is one likes to bcc oneself.
So, allow both to be set via configuration variables.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
rfc2047 unquoter spitted out an annoying "- unquoted" which was
added during debugging but I forgot to remove.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-send-email sends out the message taken from format-patch
output without quoting nor encoding. When copying the From:
line to form in-body From: field, it should not copy it
verbatim, because the From: for the header is quoted according
to RFC 2047 when not ASCII.
The original came from Jürgen Rühle, but I moved the
string munging into a separate function so that later other
people can tweak it more easily. Bugs introduced during the
translation are mine.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If user hits enter at the prompt for
"Who should the emails appear to be from?",
the value for "From:" field was emptied instead of GIT_COMMITER_IDENT.
Signed-off-by: Quy Tonthat <qtonthat@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make the default value for --smtp-server configurable through the
'sendemail.smtpserver' option in .git/config (or $HOME/.gitconfig).
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Acked-by: Ryan Anderson <rda@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We already generate a Date: header based on when the patch was
emailed. git-format-patch includes the Date: header of the
patch. Having two Date: headers is just confusing, so we
just use the current Date:
Often the mailed patches in a patch series are created over a
series of several hours or days, so the Date: header from the
original commit is incorrect for email, and often far off enough
for spam filters to complain.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I noticed a case not handled in a recent patch.
Demonstrate it like this:
$ touch new-file
$ git-send-email --dry-run --from j --to k new-file 2>err
new-file
OK. Log says:
Date: Thu, 19 Oct 2006 10:26:24 +0200
Sendmail: /usr/sbin/sendmail
From: j
Subject:
Cc:
To: k
Result: OK
$ cat err
Use of uninitialized value in pattern match (m//) at /p/bin/git-send-email line 416.
Use of uninitialized value in concatenation (.) or string at /p/bin/git-send-email line 420.
Use of uninitialized value in concatenation (.) or string at /p/bin/git-send-email line 468.
There's a patch for the $author_name part below.
The example above shows that $subject may also be used uninitialized.
That should be easy to fix, too.
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add a --dry-run option to git-send-email due to having made too many
mistakes with it in the past week. I like having a safety catch on my
machine gun.
Signed-off-by: Matthew @ilcox <matthew@wil.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier we insisted that mbox file to begin with "From ". That
is fine as long as you feed format-patch output, but if you
handcraft the input file, this is unnecessary burden. We should
detect lines that look like e-mail headers and say that is also
a mbox file.
The other input file format is traditional "send lots of email",
whose first line would never look like e-mail headers, so this
is a safe change.
The original patch was done by Matthew Wilcox, which checked
explicitly for headers the script pays attention to.
Signed-off-by: Junio C Hamano <junkio@cox.net>
An author name like 'A. U. Thor <a.u.thor@example.com>" is not a
valid RFC 2822 address; when placing it on From: line, we would
need to quote it, like this:
Signed-off-by: "Junio C. Hamano" <junkio@cox.net>
The command picked up only Subject, CC, and From headers in the
incoming mbox text. Sending out patches prepared by
git-format-patch with user's custom headers was impossible with
that.
Just keep the ones it does not need to look at and add them to
the header of the message when sending it out.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When an mbox-style patch contains a Cc: line in the header,
git-send-email will check the address against the sender specified
on the command line. If they don't match, sender_not_author will
be set to the address obtained from the Cc line.
When this happens, git-send-email inserts a From: line at the
beginning of the message body with the address obtained from the
Cc line in the header, and the sender might be accused of forging
patch authors.
This patch fixes this by only updating sender_not_author when
processing From: lines, not when processing Cc: lines.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There is no sense in duplicating the sender address in Reply-To as it's
already provided in the From header.
Signed-off-by: Alp Toker <alp@atoker.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The only visible change is that git-blame doesn't understand
"--compability" anymore, but it does accept "--compatibility" instead,
which is already documented.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It is not worth trying to force C locale (and failing) just to
format the 2822 datestring.
This code was borrowed from /usr/bin/822-date (Ian Jackson and
Klee Dienes, both in public domain), per suggestion by Eric Wong.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Acked-by: Jakub Narebski <jnareb@gmail.com>
As long as we do not need to readline from the terminal, we
should not barf when starting up the program. Without this
patch, t9001 test on Cygwin occasionally died with the following
error message:
Unable to get Terminal Size. The TIOCGWINSZ ioctl didn't work. The COLUMNS and LINES environment variables didn't work. The resize program didn't work. at /usr/lib/perl5/vendor_perl/5.8/cygwin/Term/ReadKey.pm line 362.
Compilation failed in require at /usr/lib/perl5/vendor_perl/5.8/Term/ReadLine/Perl.pm line 58.
Acked-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When multiple recipients are given to git-send-email on the same
--cc line the code does not properly handle it.
Full and proper parsing of the email addresses so I can detect
which commas mean a new email address is more than I care to implement.
In particular this email address: "bibo,mao" <bibo.mao@intel.com>
must not be treated as two email addresses.
So this patch simply treats all commas in recipient lists as
an error and fails if one is given.
At the same time it documents that git-send-email wants multiple
instances of --cc specified on the command line if you want to
cc multiple recipients.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This cleans up the pattern matching subroutine by introducing
two variables to hold regexp to approximately match local-part
and domain in the e-mail address. It is meant to catch obvious
mistakes with a cheap check.
The patch also moves "scalar" to force Email::Valid->address()
to work in !wantarray environment to extract_valid_address;
earlier it was in the caller of the subroutine, which was way
too error prone.
Signed-off-by: Junio C Hamano <junkio@cox.net>
- Fix the regular expressions for local addresses
- Fix the fallback regexp for non-local addresses, simplify the logic
Signed-off-by: Horst H. von Brand <vonbrand@inf.utfsm.cl>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This was proposed by Eric Wong and fixes the test. (Of course, git-send-email
does not work, if there is no Net::SMTP here, but it will say what is wrong
when you actually try to use send-email.)
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I'm not sure why we never actually rejected invalid addresses in
the first place. We just seemed to be using our email validity
checkers to kill duplicates.
Now we just drop invalid email addresses completely and warn
the user about it.
Since we support local sendmail, we'll also accept username-only
addresses.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This should make local mailing possible for machines without
a connection to an SMTP server.
It'll default to using /usr/sbin/sendmail or /usr/lib/sendmail
if no SMTP server is specified (the default). If it can't find
either of those paths, it'll fall back to connecting to an SMTP
server on localhost.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
mutt, gnus, pine, mailrc formats should be supported.
Testing and feedback for correctness and completeness of all formats
and support for additional formats would be good.
Nested expansions are also supported.
More than one alias file to be used.
All alias file formats must still of be the same type, though.
Two git repo-config keys are required for this
(as suggested by Ryan Anderson):
sendemail.aliasesfile = <filename of aliases file>
sendemail.aliasfiletype = (mutt|gnus|pine|mailrc)
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Acked-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes git-send-email easier to develop and debug, skipping the need
to `make git-send-email` every time.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It's not installed on enough machines, and is overkill most of
the time. We'll fallback to a very basic regexp just in case,
but nothing like the monster regexp Email::Valid has to offer :)
Small cleanup from Merlyn.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If --no-chain-reply-to is set, patches may not always be ordered
correctly in email clients. This patch makes sure each email
sent from a different second.
I chose to start with a time (slightly) in the past because
those are probably more likely in real-world usage and spam
filters might be more tolerant of them.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Net::SMTP is in the base Perl distribution, so users are more
likely to have it. Net::SMTP also allows reusing the SMTP
connection, so sending multiple emails is faster.
[jc: tweaked X-Mailer further while we are at it.]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-send-email did not check if the sender is the same as the
patch author. Follow the "From: at the beginning" convention to
propagate the patch author correctly.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Robin H. Johnson