git_config() only had a function parameter, but no callback data
parameter. This assumes that all callback functions only modify
global variables.
With this patch, every callback gets a void * parameter, and it is hoped
that this will help the libification effort.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for git-imap-send suggests a tunnel setting such as
Tunnel = "ssh -q user@server.com /usr/bin/imapd ./Maildir 2> /dev/null"
which works wonderfully and doesn't require a username, password or port
setting.
However, git-imap-send currently requires that the imap.host variable be
set in the config even when it was unused. This patch changes imap-send
to only require that the imap.host setting is set if imap.tunnel is not
set. Otherwise, server.host is set to "tunnel" for reporting purposes.
Acked-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If no imap host is specified in the git config, git imap-send used
to try to lookup a null pointer through gethostbyname(), causing a
segfault. Since setting the imap.host variable is mandatory,
imap-send now properly fails with an explanatory error message.
The problem has been reported by picca through
http://bugs.debian.org/472632
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change removes all obvious useless if-before-free tests.
E.g., it replaces code like this:
if (some_expression)
free (some_expression);
with the now-equivalent:
free (some_expression);
It is equivalent not just because POSIX has required free(NULL)
to work for a long time, but simply because it has worked for
so long that no reasonable porting target fails the test.
Here's some evidence from nearly 1.5 years ago:
http://www.winehq.org/pipermail/wine-patches/2006-October/031544.html
FYI, the change below was prepared by running the following:
git ls-files -z | xargs -0 \
perl -0x3b -pi -e \
's/\bif\s*\(\s*(\S+?)(?:\s*!=\s*NULL)?\s*\)\s+(free\s*\(\s*\1\s*\))/$2/s'
Note however, that it doesn't handle brace-enclosed blocks like
"if (x) { free (x); }". But that's ok, since there were none like
that in git sources.
Beware: if you do use the above snippet, note that it can
produce syntactically invalid C code. That happens when the
affected "if"-statement has a matching "else".
E.g., it would transform this
if (x)
free (x);
else
foo ();
into this:
free (x);
else
foo ();
There were none of those here, either.
If you're interested in automating detection of the useless
tests, you might like the useless-if-before-free script in gnulib:
[it *does* detect brace-enclosed free statements, and has a --name=S
option to make it detect free-like functions with different names]
http://git.sv.gnu.org/gitweb/?p=gnulib.git;a=blob;f=build-aux/useless-if-before-free
Addendum:
Remove one more (in imap-send.c), spotted by Jean-Luc Herren <jlh@gmx.ch>.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For that purpose, the ->buf is always initialized with a char * buf living
in the strbuf module. It is made a char * so that we can sloppily accept
things that perform: sb->buf[0] = '\0', and because you can't pass "" as an
initializer for ->buf without making gcc unhappy for very good reasons.
strbuf_init/_detach/_grow have been fixed to trust ->alloc and not ->buf
anymore.
as a consequence strbuf_detach is _mandatory_ to detach a buffer, copying
->buf isn't an option anymore, if ->buf is going to escape from the scope,
and eventually be free'd.
API changes:
* strbuf_setlen now always works, so just make strbuf_reset a convenience
macro.
* strbuf_detatch takes a size_t* optional argument (meaning it can be
NULL) to copy the buffer's len, as it was needed for this refactor to
make the code more readable, and working like the callers.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* drop nfasprintf.
* move nfvasprintf into imap-send.c back, and let it work on a 8k buffer,
and die() in case of overflow. It should be enough for imap commands, if
someone cares about imap-send, he's welcomed to fix it properly.
* replace nfvasprintf use in merge-recursive with a copy of the strbuf_addf
logic, it's one place, we'll live with it.
To ease the change, output_buffer string list is replaced with a strbuf ;)
* rework trace.c to call vsnprintf itself. It's used to format strerror()s
and git command names, it should never be more than a few octets long, let
it work on a 8k static buffer with vsnprintf or die loudly.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch fixes all calls to xread() where the return value is not
stored into an ssize_t. The patch should not have any effect whatsoever,
other than putting better/more appropriate type names on variables.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There were instances of strncmp() that were formatted improperly
(e.g. whitespace around parameter before closing parenthesis)
that caused the earlier mechanical conversion step to miss
them. This step cleans them up.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We have a number of badly checked write() calls. Often we are
expecting write() to write exactly the size we requested or fail,
this fails to handle interrupts or short writes. Switch to using
the new write_in_full(). Otherwise we at a minimum need to check
for EINTR and EAGAIN, where this is appropriate use xwrite().
Note, the changes to config handling are much larger and handled
in the next patch in the sequence.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We have a number of badly checked read() calls. Often we are
expecting read() to read exactly the size we requested or fail, this
fails to handle interrupts or short reads. Add a read_in_full()
providing those semantics. Otherwise we at a minimum need to check
for EINTR and EAGAIN, where this is appropriate use xread().
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Because I am about to introduce a global warn() function (much
like the global error function) this global declaration would
conflict with the one supplied by imap-send. Further since
imap-send's warn function output depends on its Quiet setting
we cannot simply remove its internal definition and use the
forthcoming global one.
So refactor warn() -> imap_warn() and info() -> imap_info()
(the latter was done just to be consistent in naming).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a mechanical clean-up of the way *.c files include
system header files.
(1) sources under compat/, platform sha-1 implementations, and
xdelta code are exempt from the following rules;
(2) the first #include must be "git-compat-util.h" or one of
our own header file that includes it first (e.g. config.h,
builtin.h, pkt-line.h);
(3) system headers that are included in "git-compat-util.h"
need not be included in individual C source files.
(4) "git-compat-util.h" does not have to include subsystem
specific header files (e.g. expat.h).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Cyrus imap refuses messages with a 'From ' Header.
[jc: Mike McCormack says this is fine with Courier as well.]
Signed-off-by: Markus Amsler <markus.amsler@oribi.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If GIT_TRACE is set to an absolute path (starting with a
'/' character), we interpret this as a file path and we
trace into it.
Also if GIT_TRACE is set to an integer value greater than
1 and lower than 10, we interpret this as an open fd value
and we trace into it.
Note that this behavior is not compatible with the
previous one.
We also trace whole messages using one write(2) call to
make sure messages from processes do net get mixed up in
the middle.
This patch makes it possible to get trace information when
running "make test".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Like xmalloc and xrealloc xstrdup dies with a useful message if
the native strdup() implementation returns NULL rather than a
valid pointer.
I just tried to use xstrdup in new code and found it to be missing.
However I expected it to be present as xmalloc and xrealloc are
already commonly used throughout the code.
[jc: removed the part that deals with last_XXX, which I am
finding more and more dubious these days.]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now if GIT_TRACE is set to an integer value greater than 1
and lower than 10, we interpret this as an open fd value
and we trace into it. Note that this behavior is not
compatible with the previous one.
We also trace whole messages using one write(2) call to
make sure messages from processes do net get mixed up in
the middle.
It's now possible to run the tests like this:
GIT_TRACE=9 make test 9>/var/tmp/trace.log
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
According to ANSI C99 bitfields are only defined for `signed int' and `unsigned
int'. This patch corrects the bitfield in the `msg_data_t' type from
`imap-send.c'.
Signed-off-by: Florian Forster <octo@verplant.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Trivial fixup for fork() callsites which do not check for errors.
Signed-off-by: Paul T Darga <pdarga@umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some versions of gcc check that calls to the exec() family have the proper
sentinel for variadic calls. This should be (char *) NULL according to the
man page. Although for all other purposes the 0 is equivalent, gcc
nevertheless does emit a warning for 0 and not for NULL. This also makes the
usage consistent throughout git.
The whitespace in function calls throughout imap-send.c has its own style,
so I left it that way.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-imap-send drops a patch series generated by git-format-patch into an
IMAP folder. This allows patch submitters to send patches through their
own mail program.
git-imap-send uses the following values from the GIT repository
configuration:
The target IMAP folder:
[imap]
Folder = "INBOX.Drafts"
A command to open an ssh tunnel to the imap mail server.
[imap]
Tunnel = "ssh -q user@imap.server.com /usr/bin/imapd ./Maildir
2> /dev/null"
[imap]
Host = imap.server.com
User = bob
Password = pwd
Port = 143
Johannes Schindelin