Add checks for aliases node that all properties follow alias naming
convention and the values are a valid path.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a check for unnecessary "#{size,address}-cells" when there's neither
a 'ranges' property nor child nodes with a 'reg' property.
An exception may be an overlay that adds nodes, but this case would need
"#{size,address}-cells" in the overlay to properly compile already.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a string list check for common properties ending in "-names" such as
reg-names or interrupt-names.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a check for string list properties with compatible being the first
check.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a string property check for 'label' property. 'label' is a human
readable string typically used to identify connectors or ports on devices.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The property is named "sound-dai", not "sound-dais".
Fixes: b3bbac02d5 ("checks: add phandle with arg property checks")
Signed-off-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 737b2df3, "overlay: Add syntactic sugar version of overlays"
introduced an empty rule for "devicetree" that created ambiguities in
the grammar and causes the following warning:
BISON dtc-parser.tab.c
dtc-parser.y: warning: 3 shift/reduce conflicts [-Wconflicts-sr]
Fix the grammar by explicitly testing for the condition the
new overlay grammar wants to use. This means duplicating a very small
amount of grammar processing code, but the alternative seems to be a
more invasive reorganization of the devicetree rule. Better to fix it
this way now and save the reorg for a separate patch.
Signed-off-by: Grant Likely <grant.likely@arm.com>
Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This adds some simple tests for the checks of correctly formatted PCI
bridge nodes. Doesn't test all that much, but it's a start.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Every remaining usage of strneq() is, in fact, incorrect. They're trying
to check that the first n characters of one string exactly match another
string. But, they fall into the classic trap of strncmp() on which
strneq() is based. If n is less than the length of the second string, they
only check that the first string matches the start of the second, not the
whole of it.
To fix this, remove strneq() and replace it with a strprefixeq() function
which does what we want here.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
nodename_from_path() in flattree.c uses strneq() to test that one
string starts with another. This is, in fact, the only correct usage
of strneq() in the entire tree. To make things harder to confuse, add
a strstarts() function for this purpose.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The current tests for fdt_node_check_compatible() test that it returns true
on several matching cases, but don't test that it actually returns false on
some non-matching cases, which isn't great coverage. Add some basic tests
to address that.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Right now, check_interrupts_property fails with overlays, as the phandle
for the interrupt-parent can be orphan. Avoid this by allowing the orphan
node to pass the assert check.
The process_checks() call is also moved later during init sequence,
so that we can use the global variable generate_fixups to check if
we are compiling an overlay.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
[dwg: Shortcut handling of invalid phandles]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Prior the Mac OS 10.7, the function strnlen() was not available. This patch
implements strnlen() on Mac OS X versions that are below 10.7.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In a lot of places libfdt uses a leading _ character to mark an identifier
as "internal" (not part of the published libfdt API). This is a bad idea,
because identifiers with a leading _ are generally reserved by the C
library or system. It's particularly dangerous for libfdt, because it's
designed to be able to be integrated into lots of different environments.
In some cases the leading _ has no purpose, so we simply drop it. In most
cases we move it to the end, as our new convention for marking internal
identifiers.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In a number of places, dtc and associated tools and test code use
leading _ characters on identifiers to flag them as "internal", an
idiom taken from the Linux kernel. This is a bad idea in a userspace
program, because identifiers with a leading _ are reserved for the C
library / system.
In some cases, the extra _ served no real purpose, so simply drop it. In
others move to the end of the identifier, which is a convention we're free
to use for our own purposes.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The FDT_VERSION() and _FDT_VERSION() macros don't really have anything
specific to do with the fdt version. Rather, they're the common CPP
"stringify" idiom. Move to util.h and rename to stringify() to
reflect this.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A comment in tests/stringlist.c refers to fdt_get_string(), which is not a
function that exists. From the content, it's supposed to be referring to
fdt_getprop_string().
A comment in libfdt.h has an extraneous space in a function name.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At least some clang versions (correctly) warn that 'size' is used
unititialized, if sw_tree1 is invoked with argc > 2. This corrects the
warning.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In dts plugins, it is valid to have unresolved phandle values. The
check_property_phandle_args and check_interrupts_property checks failed to
account for this resulting in spurious warnings or asserts, respectively.
Fix this by bailing from the checks if we're checking a dts plugin as
there is no way to further validate the properties.
Fixes: ee3d26f696 ("checks: add interrupts property check")
Fixes: b3bbac02d5 ("checks: add phandle with arg property checks")
Reported-by: Alan Tull <atull@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For testing we (ab)use the assembler to build us a sample dtb, independent
of the other tools (dtc and libfdt) that we're trying to test. In a few
places this uses 64-bit arithmetic to decompose 64-bit constants into
the individual bytes in the blob.
Unfortunately, it seems that some builds of GNU as don't support >32 bit
arithmetic, though it's not entirely clear to me which do and which don't
(Fedora i386 does support 64-bit, Debian arm32 doesn't).
Anyway, to be safe, this avoids 64-bit arithmetic in assembler at the cost
of some extra awkwardness because we have to define the values in 32-bit
halves.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The fdt_stringlist_count, fdt_stringslist_search, and fdt_stringlist_get
are added to the libfdt linker script as global symbols
Signed-off-by: Reiner Huober <reiner.huober@nokia.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a single test makeing sure the &foo { }; syntax works.
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For simple overlays that use a single target there exists a
simpler syntax version.
&foo { }; generates an overlay with a single target at foo.
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The size of size_t can vary between architectures, so using %ld isn't
going to work on 32-bit builds. Use the %zu modifier to make sure it is
always correct.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Preparing for another release. No particular trigger for this, just a
number of accumulated enhancements since v1.4.4.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The fdtoverlay utility reads in the base fdt blob, then expands it to make
room for all the overlays requested. However, it uses the totalsize field
of the base blob without verifying that it actually read all of it in (it's
possible the blob file could have been truncated).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The pylibfdt code is written for Python2, not Python3. So, it's safer to
explicitly request Python2 in our scripts and when checking pkg-config.
On Arch Linux at least, there isn't actually a plain "python" link, just
"python2" and "python3", so the current setup won't work at all.
According to https://www.python.org/dev/peps/pep-0394/ using "python2"
should work, and is preferred.
Updating pylibfdt to work with Python3 would be nice, but is a problem for
another day.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a check for nodes with interrupts property that they have a valid
parent, the parent has #interrupt-cells property, and the size is a
valid multiple of #interrupt-cells.
This may not handle every possible case and doesn't deal with
translation thru interrupt-map properties, but should be enough for
modern dts files.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The GPIO binding is different compared to other phandle plus args
properties in that the property name has a variable, optional prefix.
The format of the property name is [<name>-]gpio{s} where <name> can
be any legal property string. Therefore, custom matching of property
names is needed, but the common check_property_phandle_args() function
can still be used.
It's possible that there are property names matching which are not GPIO
binding specifiers. There's only been one case found in testing which is
"[<vendor>,]nr-gpio{s}". This property has been blacklisted and the same
should be done to any others we find. This check will prevent getting
any more of these, too.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Many common bindings follow the same pattern of client properties
containing a phandle and N arg cells where N is defined in the provider
with a '#<specifier>-cells' property such as:
intc0: interrupt-controller@0 {
#interrupt-cells = <3>;
};
intc1: interrupt-controller@1 {
#interrupt-cells = <2>;
};
node {
interrupts-extended = <&intc0 1 2 3>, <&intc1 4 5>;
};
Add checks for properties following this pattern.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The show_data() function is quite long. Split out the part that loops
through the values. This makes it easier to add new features.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a little note in the README about something which confused me.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add this into the class to simplify use of this function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add this into the class to simplify use of this function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add this into the class to simplify use of this function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add this into the class to simplify use of this function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At present 'make check' succeeds even if some tests fail. Adjust this so
that we can use things like 'git bisect run make check' to find a failure.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Some systems may have the Python libfdt.py library installed. Adjust the
tests to prepend the local libfdt path so that we test the local version
instead of the system version.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Using the libfdt function without going through the Python Fdt class
requires use of the uint32_t type. Add a test that this works correctly.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Some types used by libfdt.h are not understood the Python module since
they are defined outside it. An example is an attempt to do this:
import libfdt
result = libfdt.fdt_node_offset_by_phandle(fdt, phandle)
This results in:
TypeError: in method 'fdt_node_offset_by_phandle', argument 2 of
type 'uint32_t'
Include the standard integer header file to fix this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a stacked overlay unit test, piggybacking on fdtoverlay.
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In some cases you need to add a property but the contents of it
are not known at creation time, merely the extend of it.
This method allows you to create a property of a given size (filled
with garbage) while a pointer to the property data will be provided.
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
[dwg: Corrected commit message]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, both legacy (linux,phandle) and ePAPR (phandle) properties
are inserted into dtbs by default. The newer ePAPR style has been
supported in dtc and Linux kernel for 7 years. That should be a long
enough transition period. We can save a little space by not putting both
into the dtb.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add an fdtoverlay unit test. Applies applies overlay(s) and then
retrieves an inserted property to verify.
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since libfdt support overlay application on FDT blobs, provide
a command line tool that applies an arbitrary number of
overlays, one after another to a base fdt blob and output
the result in the given file.
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The -d and -s options were undocumented. Add an entry in the manual.
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2a42b14 "dtc: check.c fix compile error" changed a format string using
%lx which wasn't correct for all platforms. Unfortunately it changed it to
%zx, which is wrong for a different set of platforms (and only right on
the others by accident). The parameter we're formatting here is uint64_t,
not size_t, so we need to use the PRIx64 macro from <inttypes.h> to get
this right.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The host compiler on MSYS2 and Cygwin does not allow the -fPIC option,
issuing a warning that is treated as an error and stops the build.
Detect whether we're running under MSYS2 or Cygwin and avoid adding
-fPIC to prevent the error from happening.
Tested on Linux, MSYS2 and Cygwin.
Signed-off-by: Carles Cufi <carles.cufi@gmail.com>
[dwg: Added explicit empty CFLAGS for clarity]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Rob Herring