Several test scripts now have some code to check for a program returning
a signal, and reporting a suitable failure. This patch moves this
duplicated code into a helper function in tests.sh. At the same time we
remove a bashism found in the current copies (using the non portablr $[ ]
construct for arithmetic).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The patches introducing fdtget and fdtput inserted a peculiar bashism to
run_tests.sh using non-portable assignment within an (( )) expression.
This patch fixes it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Some of the test scripts create temporary files, which we remove at the
end. Except that we usually forgot to remove them on some exit paths. To
avoid this problem in future, this modifies the scripts to use the shell's
trap 0 functionality to automatically remove the temporaries on any exit.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Several of the test scripts remove $TMPFILE, without ever having set
the TMPFILE variable. This patch fixes it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Having braces on an if branch but not the else branch, or vice
versa is ugly and can trick you when reading the code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For the benefit of quilt users (such as myself, sometimes) have git
ignore the quilt control and patches files.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We've add some test (generated) binaries that aren't currently listed in
.gitignore, in addition more scripts now generate various tmp.* files
during operation. This adds them all to .gitignore.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This simple utility allows writing of values into a device tree from the
command line. It aimes to be the opposite of fdtget.
What is it for:
- Updating fdt values when a binary blob already exists
(even though source may be available it might be easier to use this
utility rather than sed, etc.)
- Writing machine-specific fdt values within a build system
To use it, specify the fdt binary file on command line followed by the node
and property to set. Then, provide a list of values to put into that
property. Often there will be just one, but fdtput also supports arrays and
string lists.
fdtput does not try to guess the type of the property based on looking at
the arguments. Instead it always assumes that an integer is provided. To
indicate that you want to write a string, use -ts. You can also provide
hex values with -tx.
The command line arguments are joined together into a single value. For
strings, a nul terminator is placed between each string when it is packed
into the property. To avoid this, pass the string as a single argument.
Usage:
fdtput <options> <dt file> <<node> <property> [<value>...]
Options:
-t <type> Type of data
-v Verbose: display each value decoded from command line
-h Print this help
<type> s=string, i=int, u=unsigned, x=hex
Optional modifier prefix:
hh or b=byte, h=2 byte, l=4 byte (default)
To read from stdin and write to stdout, use - as the file. So you can do:
cat somefile.dtb | fdtput -ts - /node prop "My string value" > newfile.dtb
This commit also adds basic tests to verify the major features.
Signed-off-by: Simon Glass <sjg@chromium.org>
This simply utility makes it easy for scripts to read values from the device
tree. It is written in C and uses the same libfdt as the rest of the dtc
package.
What is it for:
- Reading fdt values from scripts
- Extracting fdt information within build systems
- Looking at particular values without having to dump the entire tree
To use it, specify the fdt binary file on command line followed by a list of
node, property pairs. The utility then looks up each node, finds the property
and displays the value.
Each value is printed on a new line.
fdtget tries to guess the type of each property based on its contents. This
is not always reliable, so you can use the -t option to force fdtget to decode
the value as a string, or byte, etc.
To read from stdin, use - as the file.
Usage:
fdtget <options> <dt file> [<node> <property>]...
Options:
-t <type> Type of data
-h Print this help
<type> s=string, i=int, u=unsigned, x=hex
Optional modifier prefix:
hh or b=byte, h=2 byte, l=4 byte (default)
Signed-off-by: Simon Glass <sjg@chromium.org>
This will allow callers to rebuild .dtb files when any of the /include/d
.dtsi files are modified, not just the top-level .dts file.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Commit a31e3ef83b introduced new libfdt
functions to append to existing properties. It also included a test case
for this, but neglected to update the Makefile and run_tests.sh script
to actually build and execute this testcase.
This patch corrects the oversight.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Some properties may contain multiple values, these values may need
to be added to the property respectively. this patch provides this
functionality. The main purpose of fdt_append_prop() is to append
the values to a existing property, or create a new property if it
dose not exist.
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The freetype package already installs a binary named "ftdump", so the dtc
package conflicts with that. So rename the newer dtc tool to "fdtdump".
This even makes a bit more sense:
ftdump: [F]lat device [T]ree [dump]
fdtdump: [F]lat [D]evice [T]ree [dump]
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Elements of size 8, 16, 32, and 64 bits are supported. The new
/bits/ syntax was selected so as to not pollute the reserved
keyword space with uint8/uint16/... type names.
With this patch the following property assignment:
property = /bits/ 16 <0x1234 0x5678 0x0 0xffff>;
is equivalent to:
property = <0x12345678 0x0000ffff>;
It is now also possible to directly specify a 64 bit literal in a
cell list, also known as an array using:
property = /bits/ 64 <0xdeadbeef00000000>;
It is an error to attempt to store a literal into an element that is
too small to hold the literal, and the compiler will generate an
error when it detects this. For instance:
property = /bits/ 8 <256>;
Will fail to compile. It is also an error to attempt to place a
reference in a non 32-bit element.
The documentation has been changed to reflect that the cell list
is now an array of elements that can be of sizes other than the
default 32-bit cell size.
The sized_cells test tests the creation and access of 8, 16, 32,
and 64-bit sized elements. It also tests that the creation of two
properties, one with 16 bit elements and one with 32 bit elements
result in the same property contents.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
This function deals with appending integers of various sizes (8, 16
32, and 64 bit currently). It handles endianess conversions. If the
integer will not fit in the requested number of bits of storage it
will have it's high bits ignored.
This patch also rewrites data_append_cell and data_append_addr to use
data_append_integer.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
This utility routine will be used in the variable size cell literal
append code. It is a straightforward adaptation of the fdt32_to_cpu
function.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Now that we have utilfdt_read(), ftdump should use it too.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
The load_blob() and save_blob() functions are very similar to the utilfdt
versions. This removes the duplicated code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
This adds higher-level libfdt operations for reading/writing an fdt
blob from/to a file, as well as a function to decode a data type string
as will be used by fdtget, fdtput.
This also adds a few tests for the simple type argument supported by
utilfdt_decode_type.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
We want to avoid a separate Makefile include for each utility, so this sets
up a general one for utilities.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Simon Glass <sjg@chromium.org>
With this patch the following property assignment:
property = <0x12345678 'a' '\r' 100>;
is equivalent to:
property = <0x12345678 0x00000061 0x0000000D 0x00000064>
Signed-off-by: Anton Staaf <robotboy@chromium.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
A number of the dtc testcases trigger the new "variable set but not
used" warning from gcc 4.6. That is they have variables which are
assigned, but then never read after that point.
In a couple of cases this is just because the variables aren't needed,
so this patch removes them. In subnode_offset.c, it's because one
pair of variables we clearly intended to test we don't actually test.
This patch also adds this missing check.
This patch makes the testsuite compile clean with gcc 4.6.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Move the parsing of hex, octal and escaped characters from data.c
to util.c where it can be used for character literal parsing within
strings as well as for stand alone C style character literals.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
This useful function is split out so it will be available to programs
other than ftdump.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
The *p variable is declared and used to save inb->ptr, however p is
later never used. This has been the case since commit 6c0f3676 and can
lead to build failures with -Werror=unused-but-set-variable:
flattree.c: In function 'flat_read_mem_reserve':
flattree.c:700:14: error: variable 'p' set but not used [-Werror=unused-but-set-variable]
cc1: all warnings being treated as errors
make: *** [flattree.o] Error 1
Remove the variable.
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Commit 376ab6f2 removed the old style check functionality from DTC,
however the check option and variable were not removed. This leads to
build failures when -Werror=unused-but-set-variable is specified:
dtc.c: In function 'main':
dtc.c:102:17: error: variable 'check' set but not used [-Werror=unused-but-set-variable]
cc1: all warnings being treated as errors
make: *** [dtc.o] Error 1
make: *** Waiting for unfinished jobs....
Remove the check variable.
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
The libfdt shared library is only installed by its unversioned name.
Including it properly in a distribution requires installation of both
the versioned name (used in the binary-only package) and the unversioned
name (used in the development package). The latter is just a symbolic
link, so you need to change the soname in turn to include the version.
While at it, use Makefile variables to shorten some lines and avoid
cut-and-paste typos; and clean up remnants of when shared libraries were
not supported on Darwin.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds a "dtdiff" script to do a useful form diff of two
device trees. This automatically converts the tree to dts form (if
it's not already) and uses a new "-s" option in dtc to "sort" the
tree. That is, it sorts the reserve entries, it sorts the properties
within each node by name, and it sorts nodes by name within their
parent.
This gives a pretty sensible diff between the trees, which will ignore
semantically null internal rearrangements (directly diffing the dts
files can give a lot of noise due to the order changes).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When nodes are modified by merging device trees, nodes to be updated/merged can
be specified by a label. Specifying nodes by full path (instead of label)
doesn't quite work. This patch fixes that.
Signed-off-by: John Bonesio <bones@secretlab.ca>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
yyerror is meant to be called by the parser internal code, and it's interface
is limited. Instead create and call a new error message routine that allows
formatted strings to be used.
yyerror uses the new routine so error formatting remains consistent.
Signed-of-by: John Bonesio <bones@secretlab.ca>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Current we check for various error codes with [ $x == "NN" ]. However
'==' is not actually a correct operator for the [ (test) command. It
should be either '=' for string comparison or '-eq' for integer
comparison. It appears that the bash builtin version of test
implements '==' though, so we were getting away with it, as long as
/bin/sh was bash - or the testsuite generated no errors.
This patch fixes the usage of test so that it should work on non-bash
shells.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
During a check of the current git head of the linux kernel with the
static code analysis tool cppcheck
(http://sourceforge.net/apps/mediawiki/cppcheck/index.php?title=Main_Page)
the tool discovered a resource leak in linux-2.6/scripts/dtc/fstree.c.
Please refer the attached patch, that fixes the issue.
Fixes https://bugzilla.kernel.org/show_bug.cgi?id=15363
Signed-off-by: Martin Ettl <ettl.martin@gmx.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The dtbs_equal_ordered test program is used to implement a number of
testcases. However, the test program itself has never been
particularly well tested. In addition there are testcases coming in
future for which it would be useful to have a corresponding
"dtbs_equal_unordered" which checks for equality of device trees, not
considering the internal ordering of elements. Finally, for some
tests we may want it would be useful to check trees for equality with
the PASS case being when they are *not* equal.
This patch addresses all of the above. A dtbs_equal_unordered is
added, and both it and the existing dtbs_equal_ordered program now
take a -n option to make the PASS case be where the trees are not
equal. A number of example trees with slight modifications from
test_tree1 are used to verify that both these programs correctly
identify when the tree is altered, and a dtb_reverse program is used
to verify that the unordered version does not depend on internal
ordering. These new testcases for the equality testing programs are
split out into a new test group in run_tests.sh.
dtbs_equal_unordered uses the new property iteration functions, and so
this also acts as further testing for those functions.
dtbs_equal_unordered will be useful for further testing the recently
added tree-merging code and its upcoming extensions.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We are almost clean already with the -Wredundant-decls warning. The
only exception is a declaration for isatty() inside the flex-generated
code. This can be removed by using flex's "never-interactive" option,
which we probably should be using anyway, since we never parse
interactively in the sense that this option implies.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For ages, we've been talking about adding functions to libfdt to allow
iteration through properties. So, finally, here are some.
I got bogged down on this for a long time because I didn't want to
expose offsets directly to properties to the callers. But without
that, attempting to make reasonable iteration functions just became
horrible. So eventually, I settled on an interface which does now
expose property offsets. fdt_first_property_offset() and
fdt_next_property_offset() are used to step through the offsets of the
properties starting from a particularly node offset. The details of
the property at each offset can then be retrieved with either
fdt_get_property_by_offset() or fdt_getprop_by_offset() which have
interfaces similar to fdt_get_property() and fdt_getprop()
respectively.
No explicit testcases are included, but we do use the new functions to
reimplement the existing fdt_get_property() function.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch turns on a bunch of extra gcc warnings, most of which are
probably a good idea. Of the new warnings -Wnested-externs and
-Wstrict-prototypes need no code changes, we're already warning-clean.
The remaining one, -Wmissing-prototypes requires trivial changes in
some of the tests (making functions local).
This patch also rearranges the warnings flags into a separate make
variable for convenience, and turns on -Werror, to really encourage
people to keep the code warning-clean.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since util.c is used in programs other than full dtc, it shouldn't
include the full dtc.h, just util.h which has prototypes directly
relevant to it. This patch makes the change, and also adds includes
of the necessary system headers which were previously included
indirectly by dtc.h.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch allows the following construct:
/ {
property-a = "old";
property-b = "does not change";
};
/ {
property-a = "changed";
property-c = "new";
node-a {
};
};
Where the later device tree overrides the properties found in the
earlier tree. This is useful for laying down a template device tree
in an include file and modifying it for a specific board without having
to clone the entire tree.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
The somewhat embarrasing bug in the first version of my previous patch
would have been detected by valgrind. Thus reminded, I've run the
testsuite under valgrind and fixed any errors I found. This turned
out to be just some uninitialized buffers in test programs. The
fragments of uninitialized data aren't particularly important, but we
might as well squash the valgrind warnings, so that future valgrind
errors will stand out.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At present, both the grammar and our internal data structures mean
that there can be only one label on a node or property. This is a
fairly arbitrary constraint, given that any number of value labels can
appear at the same point, and that in C you can have any number of
labels on the same statement.
This is pretty much a non-issue now, but it may become important with
some of the extensions that Grant and I have in mind. It's not that
hard to change, so this patch does so, allowing an arbitrary number of
labels on any given node or property. As usual a testcase is added
too.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
The only purpose of the dtc_references_dts0 testcase was to check
handling of references in the old dts v0 syntax. Since we no longer
support the old syntax, and the references_dts0.dts has been converted
to the new format, it's entirely redundant. This patch removes it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, nothing will stop you from re-using the same label string
multiple times in a dts, e.g.:
/ {
samelabel: prop1 = "foo";
samelabel: prop2 = "bar";
};
or
/ {
samelabel: prop1 = "foo";
samelabel: subnode {
};
};
When using node references by label, this could lead to confusing
results (with no warning), and in -Oasm mode will result in output
which the assembler will complain about (since it too will have
duplicate labels).
This patch, therefore, adds code to checks.c to give errors if you
attempt to re-use the same label. It treats all labels (node,
property, and value) as residing in the same namespace, since the
assembler will treat them so for -Oasm mode.
Testcases for the new code are also added.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, when in -Idts -Odtb or -Ifs -Odtb modes, dtc always
defaults to using 0 as the value for the boot_cpuid_phys header field.
That's correct quite often, but there are some systems where there is
no CPU with hardware ID of 0, or where we don't want to use the CPU
with hardware ID 0 at all (e.g. for AMP-style partitioning). The only
way to override this default currently, is with the -b command line
option.
This patch improves dtc to instead base the default boot_cpuid_phys
value on the reg property of the first listed subnode of /cpus. This
means that dtc will get boot_cpuid_phys correct by default in a
greater proportion of cases (since the boot cpu is usually listed
first, and this way at least the boot_cpuid_phys default will match
some existing cpu node). If the node doesn't exist or has an invalid
'reg' property (missing or not 4 bytes in length), then
boot_cpuid_phys is set to 0.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This mod allows successful build of dtc using both bison/flex and yacc/lex.
Signed-off-by: Lukasz Wojcik <zbr@semihalf.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
This patch makes some small cleanups to the declaration of YYLTYPE,
YYLLOC_DEFAULT and related things.
- We used to use undocumented magic #defines for bison,
YYLTYPE_IS_DECLARED and YYLTYPE_IS_TRIVIAL. This may not be
portable across bison versions. Instead define YYLTYPE as a
macro in terms of struct srcpos, as the info pages suggest.
- Our kernel-derived coding style discourages typedefed
structures. So use 'struct srcpos' instead of 'srcpos'
throughout'.
- Indent the YYLLOC_DEFAULT macro according to our coding
style (it was in GNU indent style, since it was taken from
the example in the bison info).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
David Gibson