This patch adds fdt_get_phandle() and fdt_node_offset_by_phandle()
functions to libfdt. fdt_get_phandle() will retreive the phandle
value of a given node, and fdt_node_offset_by_phandle() will locate a
node given a phandle.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At present, the Makefiles will not rebuild trees.o or the dtb files
derived from it if testdata.h is updated. This is incorrect, and is
because of missing dependency information.
This patch fixes the problem by making sure that dependency
information is generated from trees.S and dumptrees.c.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
dtc: Switch dtc to C-style literals
This patch introduces a new version of dts file, distinguished from
older files by starting with the special token /dts-v1/. dts files in
the new version take C-style literals instead of the old bare hex or
OF-style base notation. In addition, the "range" for of memreserve entries
(/memreserve/ f0000-fffff) is no longer recognized in the new format.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
This patch alters the main testcase, and the dts file corresponding to
it so that we at least trivially exercise dtc's bytestring and base
conversion features.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds a batch of testcases exercising dtc's -Odts mode.
Specifically it checks that using dtc to convert dtb->dts->dtb
preserves the original dtb for a number of example dtb files.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch changes -Odts mode output so that labels within property
values in the input are preserved in the output. Applied on top of
the earlier patch to preserve node and property labels in -Odts mode,
this means that dtc in -Idts -Odts mode will transfer all labels in
the input to the output.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There is a bug in the sw_tree1 testcase / utility which puts two
"compatible" properties in one node in the output tree. This patch
fixes the bug, and also adds a new test checking that the sw_tree1
output is equal to test_tree1.dtb as its supposed to be, which should
catch future errors of this type.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently all the read/write functions in libfdt require that the
given tree be v17, and further, that the tree has the memory
reservation block, structure block and strings block stored in that
physical order.
This patch eases these constraints, by making fdt_open_int() reorder
the blocks, and/or convert the tree to v17, so that it will then be
ready for the other read-write functions.
It also extends fdt_pack() to actually remove any gaps between blocks
that might be present.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At present, all the example dtbs we use in the testsuite are version
17 and have reservation map, then structure block then strings block
(the natural ordering based on alignment constraints). However, all
libfdt's read-only and in-place write functions should also work on
v16 trees, and on trees with other layouts.
This patch adds a testcase / utility function to rearrange the blocks
of a dtb and/or regress a v17 tree to v16, and uses it to run tests on
trees with different layouts and versions.
Signed-off-by: David Gibson <david@tgibson.dropbear.id.au>
Although it's a low-level function that shouldn't normally be needed,
there are circumstances where it's useful for users of libfdt to use
the _fdt_next_tag() function. Therefore, this patch renames it to
fdt_next_tag() and publishes it in libfdt.h.
In addition, this patch adds a new testcase using fdt_next_tag(),
dtbs_equal_ordered. This testcase tests for structural equality of
two dtbs, including the order of properties and subnodes, but ignoring
NOP tags, the order of the dtb sections and the layout of strings in
the strings block. This will be useful for testing other dtc
functionality in the future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At present, dtc makes a lot of semantic checks on the device tree by
default, and will refuse to produce output if they fail. This means
people tend to need -f to force output despite failing semantic checks
rather a lot.
This patch splits the device tree checks into structural checks (no
bad or duplicate names or phandles) and semantic checks (everything
else). By default, only the structural checks are performed, and are
fatal. -f will force output even with structural errors (using this
in -Idts mode would essentially always be a bad idea, but it might be
useful in -Idtb mode for examining a malformed dtb).
Semantic checks are only performed if the new -c command line option
is supplied, and are always warnings only. Semantic checks will never
be performed on a tree with structural errors.
This patch is only a stopgap before implementing proper fine-grained
error/warning handling, but it should at least get rid of the
far-too-frequent need for -f for the time being.
This patch removes the -f from the dtc testcases now that it's no
longer necessary.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch makes the helper macros in trees.S use separate labels for
the end of each dt subblock, rather than using only start labels.
This means that the macros can now be used to create trees with the
subblocks in non-standard orders.
In addition, it adds a bunch of extra ; after lines of asm code in
macros, making them safe to use in nested macros.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch makes improvements to the way properties are printed when
in dtc is producing dts output.
- Characters which need escaping are now properly handled when
printing properties as strings
- The heuristics for what format to use for a property are
improved so that 'compatible' properties will be displayed as
expected.
- escapes.dts is altered to better demonstrate the changes,
and the string_escapes testcase is adjusted accordingly.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Recent commits 333542fabf and
fd1bf3a5ae added new testcases to dtc.
However, although the testcases were added to the Makefile and
run_tests.sh, one of the .c files for the testcase was omitted from
the patch in each case.
This patch restores the missing testcase code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
dtc supports the use of C-style escapes (\n, \t and so forth) in
string property definitions via the data_copy_escape_string()
function. However, while it supports the most common escape
characters, it doesn't support the full set that C does, which is a
potential gotcha.
Worse, a bug in the lexer means that while data_copy_escape_string()
can handle the \" escape, a string with such an escape won't lex
correctly.
This patch fixes both problems, extending data_copy_escape_string() to
support the missing escapes, and fixing the regex for strings in the
lexer to handle internal escaped quotes.
This also adds a testcase for string escape functionality.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds functions for dealing with the compatible property.
fdt_node_check_compatible() can be used to determine whether a node is
compatible with a given string and fdt_node_offset_by_compatible()
locates nodes with a given compatible string.
Testcases for these functions are also included.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The dtc/libfdt testsuite creates a number of .dtb files during its
run. To ensure a clean test run, these are currently deleted before
each group of tests.
This is, in fact, a mistake, since if something goes wrong in the
first group of tests, deleting the .dtb at the beginning of the second
group of tests makes it harder to figure out what the problem was.
This patch changes the script to only delete the files once, before
the whole test run.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds functions to libfdt for accessing the memory
reservation map section of a device tree blob. fdt_num_mem_rsv()
retreives the number of reservation entries in a dtb, and
fdt_get_mem_rsv() retreives a specific reservation entry.
fdt_add_mem_rsv() adds a new entry, and fdt_del_mem_rsv() removes a
specific numbered entry.
Testcases for these new functions are also included.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At present, the fdt_subnode_offset() and fdt_path_offset() functions
in libfdt require the exact name of the nodes in question be passed,
including unit address.
This is contrary to traditional OF-like finddevice() behaviour, which
allows the unit address to be omitted (which is useful when the device
name is unambiguous without the address).
This patch introduces similar behaviour to
fdt_subnode_offset_namelen(), and hence to fdt_subnode_offset() and
fdt_path_offset() which are implemented in terms of the former. The
unit address can be omitted from the given node name. If this is
ambiguous, the first such node in the flattened tree will be selected
(this behaviour is consistent with IEEE1275 which specifies only that
an arbitrary node matching the given information be selected).
This very small change is then followed by many more diffs which
change the test examples and testcases to exercise this behaviour.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At present, the testcases for read/write functions (setprop,
del_property and del_node) are only invoked on the single
asm-generated tree, not on any of the other tree images which should
be equivalent. The functions in question will (correctly) not work on
the "unfinished" tree output from sw_tree1, but should work on most of
the others.
This patch extends the run_tests script to invoke the r/w testcases on
more example trees. The testsuite still passes clean with this
addition.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This large patch removes all trailing whitespace from dtc (including
libfdt, the testsuite and documentation). It also removes a handful
of redundant blank lines (at the end of functions, or when there are
two blank lines together for no particular reason).
As well as anything else, this means that quilt won't whinge when I go
to convert the whole of libfdt into a patch to apply to the kernel.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds a handful of simple testcases for dtc. It adds a dts
file which should generate the same sample tree as is used for the
libfdt testcases, and tests invoking dtc on this dts, plus the
standard batch of libfdt cases on the resulting dtb, which effectively
checks that the dtb is correct.
Because the test framework assumes each testcase is an executable with
the right output conventions, we use a little shell script, dtc.sh, as
a wrapper around dtc itself. It simply invokes dtc and returns a PASS
or FAIL depending on whether dtc returned an error.
It's not much, but it's a start.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
run_tests.sh from the dtc testsuite currently has a facility ro run
just "functional" or just "stress" tests. This distinction is carried
over from libhugetlbfs where the test framework originated, and where
it made sense.
In dtc, we have no stress tests, so running these subsections isn't
particularly interesting. This patch removes these test subsets,
instead defining a single "libfdt" test subset for testcases related
to libfdt (and not dtc proper only. Currently that's all of the
testcases, but with any luck we'll have some dtc testcases in the
future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Flat device trees always have integers in their structure stored as
big-endian. From this point of view, property values are
bags-of-bytes and any endianness is up to users of the device tree to
determine.
The libfdt testcases which use properties with integer values,
currently use native endian format for the architecture on which the
testcases are run. This works ok for now, since both the creation and
checking of the example device trees happen in the same endianness.
This will become a problem, however, for tests of dtc which we want to
add in the nearish future. dtc always uses big-endian format for
'cell' format data in properties; as it needs to in order to produce
powerpc-usable device trees when hosted on a little-endian
architecture.
This patch, therefore, changes the libfdt testsuite to use big-endian
format always for integer format data, in order to interoperate sanely
with future dtc testcases. This also means that the example trees
created by the testsuite should now be byte-for-byte identical
regardless of dtc and libfdt's host platform, which is arguably an
advantage.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds a function to libfdt to locate nodes containing a
property with a specific value.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch turns on optimisation in the Makefile by default. With the
optimizer on, some uninitialized variable warnings (one real, two
bogus) are now generated. This patch also squashes those again.
The bookkeeping for producing the testsuite summary (total number of
tests passed, failed and so forth) is broken. It uses $? across
several tests, but for checks after the first, the value of $? will no
longer contain the original return code, but just that from the
previous test. This patch fixes the problem.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds an fdt_parent_offset() function which returns an
offset to the parent node of a given node. It also adds two helper
functions which are used to implement fdt_parent_offset() but are also
exported: fdt_supernode_atdepth_offset() which returns the ancestor of
a given node at a specified depth from the root of the tree, and
fdt_node_depth() which returns the depth of a given node.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds an fdt_get_path() function to libfdt, which returns
the full path of a given node in a caller supplied buffer.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds a new fdt_get_name() function to libfdt which will
return a node's name string (including unit address, if any).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, fdt_path_offset() returns FDL_ERR_BADOFFSET if given a path
with a trailing '/'. In particular this means that
fdt_path_offset("/") returns FDT_ERR_BADOFFSET rather than 0 as one
would expect.
This patch fixes the function to accept and ignore trailing '/'
characters. As well as allowing fdt_path_offset("/") this means that
fdt_path_offset("/foo/") will return the same as
fdt_path_offset("/foo") which seems in keeping with the principle of
least surprise.
This also adds a testcase to ensure that fdt_path_offset("/") returns
0 as it should.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch substantially revamps the dtc Makefiles, in particular
better integrating the Makefile for dtc proper with the Makefiles
imported from libfdt for libfdt and the shared testsuite. Notable
changes:
- No recursive make calls. Instead subsidiary Makefiles are
included into the top-level Makefile so we get a complete dependency
information.
- Common pattern rules, CFLAGS etc. shared between dtc, libfdt
and testsuite, rather than separate copies.
- Vaguely Kbuild-like non-verbose mode used by default, which
makes warnings more prominent.
- libfdt Makefile consists only of variable definitions and
helper rules, to make it more easily embeddable into other Makefile
systems.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are quite a lot of testcases in the dtc testsuite (recently
imported from libfdt). It can be easy to miss a stray FAIL result in
the midst of all the rest. To improve this, this patch adds a summary
to the end of the testsuite results giving the total number of tests
along with the number of PASSes FAILs and other results.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As a read-only functions, which take a const pointer to the fdt, treat
fdt_get_property() and fdt_getprop() as returning const pointers to
within the blob. fdt_get_property_w() and fdt_getprop_w() versions
are supplied which take a non-const fdt pointer and return a non-const
pointer for the benefit of callers wishing to alter the device tree
contents.
Likewise the lower-level fdt_offset_ptr() and _fdt_offset_ptr()
functions are changed to return const pointers, with *_w() versions
supplied.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At present fdt.h #includes stdint.h. This makes some sense, because fdt.h
uses the standard fixed-width integer types. However, this can make life
difficult when building in different environments which may not have a
stdint.h. Therefore, this patch removes the #include from fdt.h, instead
requiring that users of fdt.h define the fixed-width integer types before
including fdt.h, either by themselves including stdint.h, or by any other
means.
Since its beginning, libfdt has used an incorrect definition of the
format for a property, putting the name offset before length, rather
than the other way around as described in booting-without-of.txt.
This corrects the error, making libfdt actually produce and use trees
which are compatible with the kernel and dtc.
Signed-of-by: David Gibson <david@gibson.dropbear.id.au>
This fixes several small bugs related to fdt_strerror().
- an entry is added to the error table for FDT_ERR_BADLAYOUT.
- Incorrect usage of fdt_strerror() in check_property() and
check_getprop() is corrected (they were passing a positive error code,
when fdt_strerror() expects a negative code).
- Add code to properly retreive an error code from
fdt_get_property() in check_property(). With that a check that the
length returned by fdt_get_property() matches that stored in the
retreived property.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add the original simple test case and a case with
different based cell values. Correct output asm
files as well as stderr is captured.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
This function moves the fdt_strerror() function, currently found in
the test code into the fdt library proper. This makes life easier for
any library users who want to provide meaningful error messages. The
function goes into a module of its own, so that users who don't need
the function won't get a copy of it linked in.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
First, this patch removes several underused error codes:
FDT_ERR_BADPOINTER and FDT_ERR_BADHEADER were not used at all and are
simply removed. FDT_ERR_SIZE_MISMATCH was very similar in spirit to
FDT_ERR_NOSPACE, and used only in circumstances where there can be no
confusion between the two, so is removed and folded into
FDT_ERR_NOSPACE. FDT_ERR_INTERAL was used on only one place, on a
"can't happen" check. It seems of little value so the check and error
code are removed also.
Second, the error codes have been re-numbered and grouped roughly by
severity. That is codes which can reasonably occur in normal
operation separated from those which indicate bad parameters (and
therefore a bug in the caller) or a bad or corrupted device tree blob.
Third the test function fdt_strerror() is cleaned up a little based on
these changes.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At present, libfdt functions returning a structure offset return a
zero-or-positive offset on success, and return a negative error code
on failure. Functions which only return an error code return a
positive version of the error code, or 0 on success.
This patch improves consistency by always returning negative error
codes on failure, for both types of function. With this change, we do
away with the special fdt_offset_error() macro for checking whether a
returned offset value is an error and extracting the encoded error
value within. Instead an explicit (ret_value < 0) is now the
preferred way of checking return values for both offset-returning and
error-code-returning functions.
The fdt_strerror() function in the test code is updated
correspondingly to make more sense with the new conventions.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch abolishes the non-standard and confusing encoding of errors
into pointer return values. The only functions still returning such a
potentially encoded pointer are fdt_get_property() and fdt_getprop().
Those functions also return a length via an (int *). With this patch
those functions instead now return NULL on any error, and return the
code indicating the type of error in the length paramater.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At present, the blob containing a device tree is passed to the various
fdt_*() functions as a (struct fdt_header *) i.e. a pointer to the
header structure at the beginning of the blob.
This patch changes all the functions so that they instead take a (void
*) pointing to the blob. Under some circumstances can avoid the need
for the caller to cast a blob pointer into a (struct fdt_header *)
before passing it to the fdt_*() functions.
Using a (void *) also reduce the temptation for users of the library
to directly dereference toe (struct fdt_header *) to access header
fields. Instead they must use the fdt_get_header() or
fdt_set_header() macros, or the fdt_magic(), fdt_totalsize()
etc. wrappers around them which are safer, since they will always
handle endian conversion.
With this change, the whole-tree moving, or manipulating functions:
fdt_move(), fdt_open_into() and fdt_pack() no longer need to return a
pointer to the "new" tree. The given (void *) buffer pointer they
take can instead be used directly by the caller as the new tree.
Those functions are thus changed to instead return an error code
(which in turn reduces the number of functions using the ugly encoding
of error values into pointers).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The libfdt functions are supposed to behave tolerably well when practical,
even if given a corrupted device tree as input. A silly mistake in
fdt_get_property() means we're bounds checking against the size of a pointer
instead of the size of a property header, meaning we can get bogus
behaviour in a corrupted device tree where the structure block ends in
what's supposed to be the middle of a property.
This patch corrects the problem (fdt_get_property() will now return
BADSTRUCTURE in this case), and also adds a testcase to catch the bug.
David Gibson