This patch adds an fdt_parent_offset() function which returns an
offset to the parent node of a given node. It also adds two helper
functions which are used to implement fdt_parent_offset() but are also
exported: fdt_supernode_atdepth_offset() which returns the ancestor of
a given node at a specified depth from the root of the tree, and
fdt_node_depth() which returns the depth of a given node.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds an fdt_get_path() function to libfdt, which returns
the full path of a given node in a caller supplied buffer.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds a new fdt_get_name() function to libfdt which will
return a node's name string (including unit address, if any).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, fdt_path_offset() returns FDL_ERR_BADOFFSET if given a path
with a trailing '/'. In particular this means that
fdt_path_offset("/") returns FDT_ERR_BADOFFSET rather than 0 as one
would expect.
This patch fixes the function to accept and ignore trailing '/'
characters. As well as allowing fdt_path_offset("/") this means that
fdt_path_offset("/foo/") will return the same as
fdt_path_offset("/foo") which seems in keeping with the principle of
least surprise.
This also adds a testcase to ensure that fdt_path_offset("/") returns
0 as it should.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch substantially revamps the dtc Makefiles, in particular
better integrating the Makefile for dtc proper with the Makefiles
imported from libfdt for libfdt and the shared testsuite. Notable
changes:
- No recursive make calls. Instead subsidiary Makefiles are
included into the top-level Makefile so we get a complete dependency
information.
- Common pattern rules, CFLAGS etc. shared between dtc, libfdt
and testsuite, rather than separate copies.
- Vaguely Kbuild-like non-verbose mode used by default, which
makes warnings more prominent.
- libfdt Makefile consists only of variable definitions and
helper rules, to make it more easily embeddable into other Makefile
systems.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are quite a lot of testcases in the dtc testsuite (recently
imported from libfdt). It can be easy to miss a stray FAIL result in
the midst of all the rest. To improve this, this patch adds a summary
to the end of the testsuite results giving the total number of tests
along with the number of PASSes FAILs and other results.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As a read-only functions, which take a const pointer to the fdt, treat
fdt_get_property() and fdt_getprop() as returning const pointers to
within the blob. fdt_get_property_w() and fdt_getprop_w() versions
are supplied which take a non-const fdt pointer and return a non-const
pointer for the benefit of callers wishing to alter the device tree
contents.
Likewise the lower-level fdt_offset_ptr() and _fdt_offset_ptr()
functions are changed to return const pointers, with *_w() versions
supplied.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At present fdt.h #includes stdint.h. This makes some sense, because fdt.h
uses the standard fixed-width integer types. However, this can make life
difficult when building in different environments which may not have a
stdint.h. Therefore, this patch removes the #include from fdt.h, instead
requiring that users of fdt.h define the fixed-width integer types before
including fdt.h, either by themselves including stdint.h, or by any other
means.
Since its beginning, libfdt has used an incorrect definition of the
format for a property, putting the name offset before length, rather
than the other way around as described in booting-without-of.txt.
This corrects the error, making libfdt actually produce and use trees
which are compatible with the kernel and dtc.
Signed-of-by: David Gibson <david@gibson.dropbear.id.au>
This fixes several small bugs related to fdt_strerror().
- an entry is added to the error table for FDT_ERR_BADLAYOUT.
- Incorrect usage of fdt_strerror() in check_property() and
check_getprop() is corrected (they were passing a positive error code,
when fdt_strerror() expects a negative code).
- Add code to properly retreive an error code from
fdt_get_property() in check_property(). With that a check that the
length returned by fdt_get_property() matches that stored in the
retreived property.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add the original simple test case and a case with
different based cell values. Correct output asm
files as well as stderr is captured.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
This function moves the fdt_strerror() function, currently found in
the test code into the fdt library proper. This makes life easier for
any library users who want to provide meaningful error messages. The
function goes into a module of its own, so that users who don't need
the function won't get a copy of it linked in.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
First, this patch removes several underused error codes:
FDT_ERR_BADPOINTER and FDT_ERR_BADHEADER were not used at all and are
simply removed. FDT_ERR_SIZE_MISMATCH was very similar in spirit to
FDT_ERR_NOSPACE, and used only in circumstances where there can be no
confusion between the two, so is removed and folded into
FDT_ERR_NOSPACE. FDT_ERR_INTERAL was used on only one place, on a
"can't happen" check. It seems of little value so the check and error
code are removed also.
Second, the error codes have been re-numbered and grouped roughly by
severity. That is codes which can reasonably occur in normal
operation separated from those which indicate bad parameters (and
therefore a bug in the caller) or a bad or corrupted device tree blob.
Third the test function fdt_strerror() is cleaned up a little based on
these changes.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At present, libfdt functions returning a structure offset return a
zero-or-positive offset on success, and return a negative error code
on failure. Functions which only return an error code return a
positive version of the error code, or 0 on success.
This patch improves consistency by always returning negative error
codes on failure, for both types of function. With this change, we do
away with the special fdt_offset_error() macro for checking whether a
returned offset value is an error and extracting the encoded error
value within. Instead an explicit (ret_value < 0) is now the
preferred way of checking return values for both offset-returning and
error-code-returning functions.
The fdt_strerror() function in the test code is updated
correspondingly to make more sense with the new conventions.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch abolishes the non-standard and confusing encoding of errors
into pointer return values. The only functions still returning such a
potentially encoded pointer are fdt_get_property() and fdt_getprop().
Those functions also return a length via an (int *). With this patch
those functions instead now return NULL on any error, and return the
code indicating the type of error in the length paramater.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At present, the blob containing a device tree is passed to the various
fdt_*() functions as a (struct fdt_header *) i.e. a pointer to the
header structure at the beginning of the blob.
This patch changes all the functions so that they instead take a (void
*) pointing to the blob. Under some circumstances can avoid the need
for the caller to cast a blob pointer into a (struct fdt_header *)
before passing it to the fdt_*() functions.
Using a (void *) also reduce the temptation for users of the library
to directly dereference toe (struct fdt_header *) to access header
fields. Instead they must use the fdt_get_header() or
fdt_set_header() macros, or the fdt_magic(), fdt_totalsize()
etc. wrappers around them which are safer, since they will always
handle endian conversion.
With this change, the whole-tree moving, or manipulating functions:
fdt_move(), fdt_open_into() and fdt_pack() no longer need to return a
pointer to the "new" tree. The given (void *) buffer pointer they
take can instead be used directly by the caller as the new tree.
Those functions are thus changed to instead return an error code
(which in turn reduces the number of functions using the ugly encoding
of error values into pointers).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The libfdt functions are supposed to behave tolerably well when practical,
even if given a corrupted device tree as input. A silly mistake in
fdt_get_property() means we're bounds checking against the size of a pointer
instead of the size of a property header, meaning we can get bogus
behaviour in a corrupted device tree where the structure block ends in
what's supposed to be the middle of a property.
This patch corrects the problem (fdt_get_property() will now return
BADSTRUCTURE in this case), and also adds a testcase to catch the bug.
fdt_property_offset() is the only function in the library returning a
direct offset to a property, and no function takes such an offset
(they only take offsets to nodes, not properties). Furthermore the
only client uses for this function I can think of involve immediately
translating the offset into a pointer, effectively duplicating the
internal function _fdt_getprop()
This function abolishes fdt_property_offset(), replacing it with
fdt_get_property(), a renamed and now externally visible version of
_fdt_getprop().
This patch fixes a number of embarrasing oversights which meant libfdt
did not work correctly on little endian machines. With this patch the
testsuite now passes on x86. Device trees are always created
big-endian.
v17 of the blob format adds a field for the size of the structure
block, but is backwards compatible with v16. This patch introduces
definitions for the new field, and uses it to improve the bounds
checking in the read-only code. It also cleans up the sequential
write code using it: we no longer need to borrow the version field as
a write pointer.
This patch adds exported accessor macros for the various flat device
tree header fields to libfdt.h. This necessitates moving some of the
byte-swapping functions.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch fixes some completely bogus error checking logic from the
nop_property testcase (resulted from a cut-and-paste error).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Without this rather odd constrained pattern rule, make attempts to build
dumptrees using the default %: %.c rule instead of the defined %: %.o and
%.o: %.c rules.
David Gibson