nvidia driver needs this via modprobe script.
Needs to do change the group after a device node got created.
Add chown instead of chgrp which can also change the owner of a file.
Ask Stefand Dirsch <sndirsch@suse.de> for details.
Signed-off-by: Thomas Renninger <trenn@suse.de>
The module_setup.sh script was missing an '_arch' declaration,
causing network not to be installed on s390.
Signed-off-by: Thomas Renninger <trenn@suse.de>
SUSE is using specific settings for dracut, so add them
to the suse.conf.example file.
Add vi and find to the debug module add some help text to the suse.conf
file when and how to use it.
Signed-off-by: Thomas Renninger <trenn@suse.de>
lldpad is a system-wide process, which must be started only once.
So we should be separate it from fcoe-up, as it might be called
several times.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
DCB & fipvlan can only be called on real devices, not VLAN
ones. So skip any VLAN devices which might been added to the
list of network interfaces.
References: bnc#878583
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
When running with --hostonly-cmdline we should be storing
the current configuration in /etc/cmdline.d so that dracut
will be configure the system automatically.
References: bnc#877288
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
The 'create' sysfs entry has been removed for newer fcoe modules,
so just check if the module directory exists.
References: bnc#877288
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
--add-drivers and --filesystems kernel drivers are added via:
instmods -c
The check option makes the function return if one driver could not get
installed without trying to install further drivers which is bad.
The user is still informed ($_silent is by default no), but all modules
passed to instmods are tried to be loaded, even if one fails.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Due to some obsure reason the IFS parameter is not set correctly
when evaluating get_ibft_mod(). So change the parsing to not rely
on IFS altogether.
References: bnc#886199
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
cmdline
If the rootfs is an nfs mount, also know as nfsroot, add the correct
parameter to the dracut cmdline.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Dracut parses /etc/fstab when --mount is option is passed (e.g. kdump).
In host_devs variable the real block device must be stored, not UUID=
There are other /etc/fstab syntax possibilities we now warn that they
are not correctly parsed. This will be fixed by another patch
when there is time to test this properly.
Signed-off-by: Thomas Renninger <trenn@suse.de>
If a logfile is passed to dracut via --logfile option and doesn't
exist, dracut doesn't create it and logs nothing. Instead, dracut
should try to touch the file and print a warning if creating fails.
References: bnc#892191
Signed-off-by: Thomas Renninger <trenn@suse.de>
In case of systemd is used the timeout already is set to 180s, compare
with file: modules.d/98systemd/dracut-initqueue.sh
Do the same if systemd is not used, e.g. in kdump case.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Some modules (like ext4) provide aliases by which the modules
can be accessed, too. But when using aliases directly dracut
fails to include the correct module. So translate the alias
into the correct module name before checking the module.
References: bnc#886839
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
When 'initqueue' is called with an invalid command it'll generate
invalid job scripts. This will lead to confusing error messages
later on.
So abort in these cases and print out a warning.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
If kernel cmdline has no root= provided, *and* the initrd carries
a default value, create a systemd mount unit to have it available
in /sysroot
References: bnc#855258
Signed-off-by: Thorsten Behrens <tbehrens@suse.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Add more corner cases from systemd's
unit_name_from_path_instance() C function.
Signed-off-by: Thorsten Behrens <tbehrens@suse.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
When generating the initramfs we should be printing out the
generated dracut commandline used for booting.
This will simplify debugging.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
If a device-mapper device is not created by LVM it's pointless
to call any 'lvm' programs got extract details; they'll be
failing anyway. So check the UUID before calling 'lvm'.
This speeds up initrd creation and avoids I/O errors on
multipath devices.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
When generating units for devices the administrator might
want to use a different timeout than the default.
So implement a new parameter 'rd.timeout' for this.
References: bnc#878770
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Make sure duplicates of iscsi.initiator vanish.
Only get one rd.iscsi.* paramter value. If getargs is used and several
parameters are parsed, one gets two values separated by whitespace in a
variable which breaks later code and is not suppported.
Signed-off-by: Thomas Renninger <trenn@suse.de>
When installing on an software iscsi root we need to generate
the correct commandline, otherwise the system cannot boot.
References: bnc#880108
Patch: 0093
When using software iscsi we should be using the existing
configuration from the system for the time being.
References: bnc#884768
Patch: 0095
Avoid bad ip route call on empty address
Patch: 0143
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
This fixes up some 95iscsi/module-setup.sh which might print out empty
commandline files.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
bnx2i is using a separate iSCSI offload engine with a separate
MAC address. As a result, the iBFT information is displaying
a MAC address which does not relate to any MAC address from
the network interfaces.
In addition, the iSCSI offload engine works independently on
the NIC, so we do not need to enable the NIC for iSCSI offload
to work.
This patch modifies the automatic iBFT detection to not set
the 'ip=ibft' flag when bnx2i offload is detected.
References: bnc#855747
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
The bad initqueue parameter passing is already addressed by git commit:
commit bb8c16d121
and
commit 486a8f33e2
However this appraoch is slightly different:
"$netroot" instead of "'$netroot'", etc.
initqueue will process the arguments, assuming the first non-option
argument to be the program to be executed. Putting the entire
commandline into this argument confuses both, initqueue and the
program in question.
References: bnc#879038
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
When iSCSI firmware booting is selected we should not rely on
'netroot' or 'iscsiroot' variables to be set.
References: bnc#873448
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
iscsiuio is using pthread, which requires libgcc_s for
pthread_cancel to work.
Without this library iscsiuio will crash with SIGABRT.
References: bnc#881692
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Some iSCSI initiator present firmware information in
/sys/firmware/ibft or /sys/firmware/iscsi_bootX
Whenever we detect one of those directories we should assume
that the iSCSI devices should be activated.
Also incorporates SUSE patches:
0049:
95iscsi: Use 'ip=ibft' for ibft autoconfiguration
For iBFT autoconfiguration we should be setting 'ip=ibft'
instead of rd.neednet. This should instruct dracut to only
enable the iBFT interfaces and leave the rest alone.
References: bnc#879038
0054:
95iscsi: update commandline printing
dracut has a separate callout 'cmdline' which should be used
for printing out the generated commandline.
Signed-off-by: Pavel Wieczorkiewicz <pwieczorkiewicz@suse.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
The multipath and kpartx rules have different numbers in SUSE.
The 11-dm-mpath.rules file had been missing, causing
blacklisting to not work properly.
References: bnc#873151, bnc#872662, bnc#883149
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
sg3_utils now provides two rules 55-scsi-sg3_id.rules and
58-scsi-sg3_symlink.rules, which need to be included instead
of the older 59-scsi-sg3_utils.rules.
References: bnc#873151
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
This sed script to edit 64-md-raid-assemble.rules needs to
be adjusted for latest mdadm
References: bnc#866660
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
During boot systemd tries to load autofs4, but dracut will only
add it if it's loaded by the time dracut is run.
Modify dracut to always load autofs4.
References: bnc#869411
Signed-off-by: Thomas Renninger <trenn@suse.de>
Incorporates these patches:
- 0013 mkinitrd-suse: do not update bootloader if no kernel was found
bnc#858268
- 0018 mkinitrd-suse: Fix whitespaces when adding drivers
- 0032 mkinitrd-suse.sh: Use '--hostonly' and '--hostonly-cmdline' correctly
bnc#874000,bnc#874905,bnc#874363
- 0039 Remove --force parameter from mkinitrd
- 0041 mkinitd-suse: remove --hostonly and --hostonly-cmdline
Should be set via configuration files, not in the script itself.
- 0051 mkinitrd-suse: add 'update bootloader' message
- 0120 mkinitrd-suse.sh: Bail out with exit 1 if initrd cannot be generated
bnc#886630
Signed-off-by: Thomas Renninger <trenn@suse.de>
This mimicks the similar move of os-release which was done in systemd. These
files are not configuration, but part of the OS.
Still symlinks are in place for compatibility, but those should probably be
dropped eventually.
In the judgment sentence, it will print the following warning message,
becasuse of lacking the blank on the left of ']'.
/lib/net-lib.sh: line 110: [: missing `]'
Signed-off-by: Minfei Huang <mhuang@redhat.com>
some programs e.g. systemd-journald expect a directory in /var/log as
the marker to do some actions. Here journald tries to flush
/run/log/journal to /var/log/journal, if the directory is seen.
/var/log is now a symlink to /run/initramfs/log.
If the user pressed ESC while checkisomd5 runs the media check, it will
exit with "2". Previously that would mean, that the media check was not
successful.
The multipathd package might install a service and a socket
file. Using the original service file from the installed
system without the socket file triggers a bug in systemd,
causing systemd to crash.
As we don't actually need to socket file in the initrd we
should be installing our own service file which does not
reference the socket file at all.
References: bnc#871610
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
The device handler modules need to be loaded early during boot
to avoid I/O errors being printed to the system log.
References: bnc#871617
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Hannes Reinecke