The sdhci-pci module is currently not being included in the initramfs,
even though other sdhci modules are. This breaks boot on systems that
rely on this driver to access the root filesystem.
Instead of looking for modules that use sdhci_pltfm_init, look for
sdhci_add_host. I checked 3.18 kernel sources, and this change
does not remove any of the previously-matched SDHCI drivers.
It should result in the addition of sdhci-pci, sdhci-s3c, sdhci-spear
and sdhci-acpi.
For targets with colons in the iSCSI target name:
"iqn.2000-09.com.foo:storage-system.e2000:00000001cm1p1"
the parser was confused with the optional iscsi_iface_name and
iscsi_netdev_name.
This patch reintroduces the old IQN, EUI and NAA parsing and enhances
the fallback parser by checking the LUN for a numerical value.
As reported in https://bugs.mageia.org/show_bug.cgi?id=14799
the xhci module got splitted up in upstream linux merged during
3.18 release cycle:
>From 29e409f0f7613f9fd2235e41f0fa33e48e94544e Mon Sep 17 00:00:00 2001
From: Andrew Bresticker <abrestic@chromium.org>
Date: Fri, 3 Oct 2014 11:35:29 +0300
Subject: xhci: Allow xHCI drivers to be built as separate modules
so we need to adjust 90kernel-modules accordingly.
Signed-off-by: Thomas Backlund <tmb@mageia.org>
The space does not separate the elements reliably, spaces can be
embedded in parenthesized expressions too:
libgmpxx.so.4 (libc6, hwcap: 0x0000000004000000) => /lib/sse2/libgmpxx.so.4
libgmp.so.10 (libc6, hwcap: 0x0000000004000000) => /lib/sse2/libgmp.so.10
This results in dracut creating '0x0000000004000000' and '=>'
directories in the initramfs image.
When including a directory, the files were considered in the directory
name which lead to messages like :
cp: failed to access '/var/tmp/initramfs.L9s2zO///init-func': No such file or directory
This patch does make the destdir more explicit and copy files into the
destination directory instead of destdir/filename/
rootfs is on nbd
In not hostonly mode, require_binaries will still complain.
If in hostonly mode and the module is explicitly added via -a nbd, then
install() section will still complain later:
dracut-install: ERROR: installing 'nbd-client'
Signed-off-by: Thomas Renninger <trenn@suse.de>
95rootfs-block would not terminate the commandline parameter with
a space or newline, instead it'll rely on the main routine from
dracut.sh to do this.
Which will cause unexpected problems for any modules called
after this.
So terminate the commandline parameters correctly here and remove
the newline from dracut.sh.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
This aligns other places piping cmdline() output to cmdline.d files
with the earlier fix for 95rootfs-block.
Signed-off-by: Thorsten Behrens <tbehrens@suse.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
If there's a root fallback, at least attempt to have it falling
back to the last root filesystem this system ran off of.
Signed-off-by: Thorsten Behrens <tbehrens@suse.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
cmdline_journal does not contain linefeeds anymore, so read
silently skipped it altogether.
Signed-off-by: Thorsten Behrens <tbehrens@suse.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
nvidia driver needs this via modprobe script.
Needs to do change the group after a device node got created.
Add chown instead of chgrp which can also change the owner of a file.
Ask Stefand Dirsch <sndirsch@suse.de> for details.
Signed-off-by: Thomas Renninger <trenn@suse.de>
The module_setup.sh script was missing an '_arch' declaration,
causing network not to be installed on s390.
Signed-off-by: Thomas Renninger <trenn@suse.de>
SUSE is using specific settings for dracut, so add them
to the suse.conf.example file.
Add vi and find to the debug module add some help text to the suse.conf
file when and how to use it.
Signed-off-by: Thomas Renninger <trenn@suse.de>
lldpad is a system-wide process, which must be started only once.
So we should be separate it from fcoe-up, as it might be called
several times.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
DCB & fipvlan can only be called on real devices, not VLAN
ones. So skip any VLAN devices which might been added to the
list of network interfaces.
References: bnc#878583
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
When running with --hostonly-cmdline we should be storing
the current configuration in /etc/cmdline.d so that dracut
will be configure the system automatically.
References: bnc#877288
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
The 'create' sysfs entry has been removed for newer fcoe modules,
so just check if the module directory exists.
References: bnc#877288
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
--add-drivers and --filesystems kernel drivers are added via:
instmods -c
The check option makes the function return if one driver could not get
installed without trying to install further drivers which is bad.
The user is still informed ($_silent is by default no), but all modules
passed to instmods are tried to be loaded, even if one fails.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Due to some obsure reason the IFS parameter is not set correctly
when evaluating get_ibft_mod(). So change the parsing to not rely
on IFS altogether.
References: bnc#886199
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
cmdline
If the rootfs is an nfs mount, also know as nfsroot, add the correct
parameter to the dracut cmdline.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Dracut parses /etc/fstab when --mount is option is passed (e.g. kdump).
In host_devs variable the real block device must be stored, not UUID=
There are other /etc/fstab syntax possibilities we now warn that they
are not correctly parsed. This will be fixed by another patch
when there is time to test this properly.
Signed-off-by: Thomas Renninger <trenn@suse.de>
If a logfile is passed to dracut via --logfile option and doesn't
exist, dracut doesn't create it and logs nothing. Instead, dracut
should try to touch the file and print a warning if creating fails.
References: bnc#892191
Signed-off-by: Thomas Renninger <trenn@suse.de>
In case of systemd is used the timeout already is set to 180s, compare
with file: modules.d/98systemd/dracut-initqueue.sh
Do the same if systemd is not used, e.g. in kdump case.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Some modules (like ext4) provide aliases by which the modules
can be accessed, too. But when using aliases directly dracut
fails to include the correct module. So translate the alias
into the correct module name before checking the module.
References: bnc#886839
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Harald Hoyer