You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

114 lines
3.1 KiB

#!/bin/sh
#
# ip-down.ipv6to4
#
#
# Taken from:
# (P) & (C) 2000-2005 by Peter Bieringer <pb@bieringer.de>
#
# You will find more information on the initscripts-ipv6 homepage at
# http://www.deepspace6.net/projects/initscripts-ipv6.html
#
# Version 2005-09-22
#
# Calling parameters:
# $1: interface name
#
# Called (mostly) by /etc/ppp/ip-down.local
# like: /etc/ppp/ip-down.ipv6to4 $1 >>/var/log/ppp-ipv6to4.log 2>&1
#
# Note: this script will *check* whether the existing 6to4 tunnel
# was set before by using "ip-up.ipv6to4" comparing IPv4 address
# of device with the generated 6to4 prefix
#
# Uses following information from /etc/sysconfig/network-scripts/ifcfg-$1:
# IPV6TO4INIT=yes|no: controls configuration
# IPV6TO4_ROUTING="<device>-<suffix>/<prefix length> ...": information to setup additional interfaces
#
# IPV6_CONTROL_RADVD=yes|no: controls radvd triggering
# IPV6_RADVD_PIDFILE=<file>: PID file of radvd for sending signals, default is "/var/run/radvd/radvd.pid"
# IPV6_RADVD_TRIGGER_ACTION=startstop|reload|restart|SIGHUP: how to trigger radvd (optional, default is SIGHUP)
#
if [ -z "$1" ]; then
echo $"Argument 1 is empty but should contain interface name - skip IPv6to4 initialization"
exit 1
fi
# Get global network configuration
. /etc/sysconfig/network
# Source IPv4 helper functions
cd /etc/sysconfig/network-scripts
. ./network-functions
CONFIG=$1
[ -f "$CONFIG" ] || CONFIG=ifcfg-$CONFIG
source_config
# IPv6 don't need aliases anymore, config is skipped
REALDEVICE=${DEVICE%%:*}
[ "$DEVICE" != "$REALDEVICE" ] && exit 0
if [ ! -f /etc/sysconfig/network-scripts/network-functions-ipv6 ]; then
exit 1
fi
. /etc/sysconfig/network-scripts/network-functions-ipv6
# Run basic IPv6 test, if not ok, skip IPv6 initialization
ipv6_test testonly || exit 0
# Test status of ppp device
ipv6_test_device_status $DEVICE
if [ $? != 0 -a $? != 11 ]; then
# device doesn't exist or other problem occurs
exit 1
fi
# Test status of tun6to4 device
ipv6_test_device_status tun6to4
if [ $? = 0 -o $? = 11 ]; then
# Device exists
valid6to4config="yes"
# Get IPv4 address from interface
ipv4addr="$(ipv6_get_ipv4addr_of_device $DEVICE)"
if [ -z "$ipv4addr" ]; then
# Has no IPv4 address
valid6to4config="no"
fi
# Get local IPv4 address of dedicated tunnel
ipv4addr6to4local="$(ipv6_get_ipv4addr_of_tunnel tun6to4 local)"
# IPv6to4 not enabled on this interface?
if [ $IPV6TO4INIT != "yes" ]; then
# Check against configured 6to4 tunnel to see if this interface was regardless used before
if [ "$ipv4addr" != "$ipv4addr6to4local" ]; then
# IPv4 address of interface does't match local tunnel address, interface was not used for current 6to4 setup
valid6to4config="no"
fi
fi
fi
if [ "$valid6to4config" = "yes" ]; then
if [ "$IPV6_CONTROL_RADVD" = "yes" ]; then
# Control running radvd
ipv6_trigger_radvd down "$IPV6_RADVD_TRIGGER_ACTION" $IPV6_RADVD_PIDFILE
fi
if [ -n "$IPV6TO4_ROUTING" ]; then
# Delete routes to local networks
for devsuf in $IPV6TO4_ROUTING; do
dev="${devsuf%%-*}"
ipv6_cleanup_6to4_device $dev
done
fi
# Delete all configured 6to4 address
ipv6_cleanup_6to4_tunnels tun6to4
fi