openssl/SOURCES/0067-fix-ppc64-montgomery.patch

diff --git a/crypto/bn/asm/ppc64-mont-fixed.pl b/crypto/bn/asm/ppc64-mont-fixed.pl
index 56df89dc27da..e69de29bb2d1 100755
--- a/crypto/bn/asm/ppc64-mont-fixed.pl
+++ b/crypto/bn/asm/ppc64-mont-fixed.pl
@@ -1,581 +0,0 @@
-#! /usr/bin/env perl
-# Copyright 2021 The OpenSSL Project Authors. All Rights Reserved.
-#
-# Licensed under the Apache License 2.0 (the "License").  You may not use
-# this file except in compliance with the License.  You can obtain a copy
-# in the file LICENSE in the source distribution or at
-# https://www.openssl.org/source/license.html
-
-# ====================================================================
-# Written by Amitay Isaacs <amitay@ozlabs.org>, Martin Schwenke
-# <martin@meltin.net> & Alastair D'Silva <alastair@d-silva.org> for
-# the OpenSSL project.
-# ====================================================================
-
-#
-# Fixed length (n=6), unrolled PPC Montgomery Multiplication
-#
-
-# 2021
-#
-# Although this is a generic implementation for unrolling Montgomery
-# Multiplication for arbitrary values of n, this is currently only
-# used for n = 6 to improve the performance of ECC p384.
-#
-# Unrolling allows intermediate results to be stored in registers,
-# rather than on the stack, improving performance by ~7% compared to
-# the existing PPC assembly code.
-#
-# The ISA 3.0 implementation uses combination multiply/add
-# instructions (maddld, maddhdu) to improve performance by an
-# additional ~10% on Power 9.
-#
-# Finally, saving non-volatile registers into volatile vector
-# registers instead of onto the stack saves a little more.
-#
-# On a Power 9 machine we see an overall improvement of ~18%.
-#
-
-use strict;
-use warnings;
-
-my ($flavour, $output, $dir, $xlate);
-
-# $output is the last argument if it looks like a file (it has an extension)
-# $flavour is the first argument if it doesn't look like a file
-$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
-$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
-
-$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
-( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or
-( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
-die "can't locate ppc-xlate.pl";
-
-open STDOUT,"| $^X $xlate $flavour \"$output\""
-    or die "can't call $xlate: $!";
-
-if ($flavour !~ /64/) {
-	die "bad flavour ($flavour) - only ppc64 permitted";
-}
-
-my $SIZE_T= 8;
-
-# Registers are global so the code is remotely readable
-
-# Parameters for Montgomery multiplication
-my $sp	= "r1";
-my $toc	= "r2";
-my $rp	= "r3";
-my $ap	= "r4";
-my $bp	= "r5";
-my $np	= "r6";
-my $n0	= "r7";
-my $num	= "r8";
-
-my $i	= "r9";
-my $c0	= "r10";
-my $bp0	= "r11";
-my $bpi	= "r11";
-my $bpj	= "r11";
-my $tj	= "r12";
-my $apj	= "r12";
-my $npj	= "r12";
-my $lo	= "r14";
-my $c1	= "r14";
-
-# Non-volatile registers used for tp[i]
-#
-# 12 registers are available but the limit on unrolling is 10,
-# since registers from $tp[0] to $tp[$n+1] are used.
-my @tp = ("r20" .. "r31");
-
-# volatile VSRs for saving non-volatile GPRs - faster than stack
-my @vsrs = ("v32" .. "v46");
-
-package Mont;
-
-sub new($$)
-{
-	my ($class, $n) = @_;
-
-	if ($n > 10) {
-		die "Can't unroll for BN length ${n} (maximum 10)"
-	}
-
-	my $self = {
-		code => "",
-		n => $n,
-	};
-	bless $self, $class;
-
-	return $self;
-}
-
-sub add_code($$)
-{
-	my ($self, $c) = @_;
-
-	$self->{code} .= $c;
-}
-
-sub get_code($)
-{
-	my ($self) = @_;
-
-	return $self->{code};
-}
-
-sub get_function_name($)
-{
-	my ($self) = @_;
-
-	return "bn_mul_mont_fixed_n" . $self->{n};
-}
-
-sub get_label($$)
-{
-	my ($self, $l) = @_;
-
-	return "L" . $l . "_" . $self->{n};
-}
-
-sub get_labels($@)
-{
-	my ($self, @labels) = @_;
-
-	my %out = ();
-
-	foreach my $l (@labels) {
-		$out{"$l"} = $self->get_label("$l");
-	}
-
-	return \%out;
-}
-
-sub nl($)
-{
-	my ($self) = @_;
-
-	$self->add_code("\n");
-}
-
-sub copy_result($)
-{
-	my ($self) = @_;
-
-	my ($n) = $self->{n};
-
-	for (my $j = 0; $j < $n; $j++) {
-		$self->add_code(<<___);
-	std		$tp[$j],`$j*$SIZE_T`($rp)
-___
-	}
-
-}
-
-sub mul_mont_fixed($)
-{
-	my ($self) = @_;
-
-	my ($n) = $self->{n};
-	my $fname = $self->get_function_name();
-	my $label = $self->get_labels("outer", "enter", "sub", "copy", "end");
-
-	$self->add_code(<<___);
-
-.globl	.${fname}
-.align	5
-.${fname}:
-
-___
-
-	$self->save_registers();
-
-	$self->add_code(<<___);
-	ld		$n0,0($n0)
-
-	ld		$bp0,0($bp)
-
-	ld		$apj,0($ap)
-___
-
-	$self->mul_c_0($tp[0], $apj, $bp0, $c0);
-
-	for (my $j = 1; $j < $n - 1; $j++) {
-		$self->add_code(<<___);
-	ld		$apj,`$j*$SIZE_T`($ap)
-___
-		$self->mul($tp[$j], $apj, $bp0, $c0);
-	}
-
-	$self->add_code(<<___);
-	ld		$apj,`($n-1)*$SIZE_T`($ap)
-___
-
-	$self->mul_last($tp[$n-1], $tp[$n], $apj, $bp0, $c0);
-
-	$self->add_code(<<___);
-	li		$tp[$n+1],0
-
-___
-
-	$self->add_code(<<___);
-	li		$i,0
-	mtctr		$num
-	b		$label->{"enter"}
-
-.align	4
-$label->{"outer"}:
-	ldx		$bpi,$bp,$i
-
-	ld		$apj,0($ap)
-___
-
-	$self->mul_add_c_0($tp[0], $tp[0], $apj, $bpi, $c0);
-
-	for (my $j = 1; $j < $n; $j++) {
-		$self->add_code(<<___);
-	ld		$apj,`$j*$SIZE_T`($ap)
-___
-		$self->mul_add($tp[$j], $tp[$j], $apj, $bpi, $c0);
-	}
-
-	$self->add_code(<<___);
-	addc		$tp[$n],$tp[$n],$c0
-	addze		$tp[$n+1],$tp[$n+1]
-___
-
-	$self->add_code(<<___);
-.align	4
-$label->{"enter"}:
-	mulld		$bpi,$tp[0],$n0
-
-	ld		$npj,0($np)
-___
-
-	$self->mul_add_c_0($lo, $tp[0], $bpi, $npj, $c0);
-
-	for (my $j = 1; $j < $n; $j++) {
-		$self->add_code(<<___);
-	ld		$npj,`$j*$SIZE_T`($np)
-___
-		$self->mul_add($tp[$j-1], $tp[$j], $npj, $bpi, $c0);
-	}
-
-	$self->add_code(<<___);
-	addc		$tp[$n-1],$tp[$n],$c0
-	addze		$tp[$n],$tp[$n+1]
-
-	addi		$i,$i,$SIZE_T
-	bdnz		$label->{"outer"}
-
-	and.		$tp[$n],$tp[$n],$tp[$n]
-	bne		$label->{"sub"}
-
-	cmpld	$tp[$n-1],$npj
-	blt		$label->{"copy"}
-
-$label->{"sub"}:
-___
-
-	#
-	# Reduction
-	#
-
-		$self->add_code(<<___);
-	ld		$bpj,`0*$SIZE_T`($np)
-	subfc		$c1,$bpj,$tp[0]
-	std		$c1,`0*$SIZE_T`($rp)
-
-___
-	for (my $j = 1; $j < $n - 1; $j++) {
-		$self->add_code(<<___);
-	ld		$bpj,`$j*$SIZE_T`($np)
-	subfe		$c1,$bpj,$tp[$j]
-	std		$c1,`$j*$SIZE_T`($rp)
-
-___
-	}
-
-		$self->add_code(<<___);
-	subfe		$c1,$npj,$tp[$n-1]
-	std		$c1,`($n-1)*$SIZE_T`($rp)
-
-___
-
-	$self->add_code(<<___);
-	addme.		$tp[$n],$tp[$n]
-	beq		$label->{"end"}
-
-$label->{"copy"}:
-___
-
-	$self->copy_result();
-
-	$self->add_code(<<___);
-
-$label->{"end"}:
-___
-
-	$self->restore_registers();
-
-	$self->add_code(<<___);
-	li		r3,1
-	blr
-.size .${fname},.-.${fname}
-___
-
-}
-
-package Mont::GPR;
-
-our @ISA = ('Mont');
-
-sub new($$)
-{
-    my ($class, $n) = @_;
-
-    return $class->SUPER::new($n);
-}
-
-sub save_registers($)
-{
-	my ($self) = @_;
-
-	my $n = $self->{n};
-
-	$self->add_code(<<___);
-	std	$lo,-8($sp)
-___
-
-	for (my $j = 0; $j <= $n+1; $j++) {
-		$self->{code}.=<<___;
-	std	$tp[$j],-`($j+2)*8`($sp)
-___
-	}
-
-	$self->add_code(<<___);
-
-___
-}
-
-sub restore_registers($)
-{
-	my ($self) = @_;
-
-	my $n = $self->{n};
-
-	$self->add_code(<<___);
-	ld	$lo,-8($sp)
-___
-
-	for (my $j = 0; $j <= $n+1; $j++) {
-		$self->{code}.=<<___;
-	ld	$tp[$j],-`($j+2)*8`($sp)
-___
-	}
-
-	$self->{code} .=<<___;
-
-___
-}
-
-# Direct translation of C mul()
-sub mul($$$$$)
-{
-	my ($self, $r, $a, $w, $c) = @_;
-
-	$self->add_code(<<___);
-	mulld		$lo,$a,$w
-	addc		$r,$lo,$c
-	mulhdu		$c,$a,$w
-	addze		$c,$c
-
-___
-}
-
-# Like mul() but $c is ignored as an input - an optimisation to save a
-# preliminary instruction that would set input $c to 0
-sub mul_c_0($$$$$)
-{
-	my ($self, $r, $a, $w, $c) = @_;
-
-	$self->add_code(<<___);
-	mulld		$r,$a,$w
-	mulhdu		$c,$a,$w
-
-___
-}
-
-# Like mul() but does not to the final addition of CA into $c - an
-# optimisation to save an instruction
-sub mul_last($$$$$$)
-{
-	my ($self, $r1, $r2, $a, $w, $c) = @_;
-
-	$self->add_code(<<___);
-	mulld		$lo,$a,$w
-	addc		$r1,$lo,$c
-	mulhdu		$c,$a,$w
-
-	addze		$r2,$c
-___
-}
-
-# Like C mul_add() but allow $r_out and $r_in to be different
-sub mul_add($$$$$$)
-{
-	my ($self, $r_out, $r_in, $a, $w, $c) = @_;
-
-	$self->add_code(<<___);
-	mulld		$lo,$a,$w
-	addc		$lo,$lo,$c
-	mulhdu		$c,$a,$w
-	addze		$c,$c
-	addc		$r_out,$r_in,$lo
-	addze		$c,$c
-
-___
-}
-
-# Like mul_add() but $c is ignored as an input - an optimisation to save a
-# preliminary instruction that would set input $c to 0
-sub mul_add_c_0($$$$$$)
-{
-	my ($self, $r_out, $r_in, $a, $w, $c) = @_;
-
-	$self->add_code(<<___);
-	mulld		$lo,$a,$w
-	addc		$r_out,$r_in,$lo
-	mulhdu		$c,$a,$w
-	addze		$c,$c
-
-___
-}
-
-package Mont::GPR_300;
-
-our @ISA = ('Mont::GPR');
-
-sub new($$)
-{
-	my ($class, $n) = @_;
-
-	my $mont = $class->SUPER::new($n);
-
-	return $mont;
-}
-
-sub get_function_name($)
-{
-	my ($self) = @_;
-
-	return "bn_mul_mont_300_fixed_n" . $self->{n};
-}
-
-sub get_label($$)
-{
-	my ($self, $l) = @_;
-
-	return "L" . $l . "_300_" . $self->{n};
-}
-
-# Direct translation of C mul()
-sub mul($$$$$)
-{
-	my ($self, $r, $a, $w, $c, $last) = @_;
-
-	$self->add_code(<<___);
-	maddld		$r,$a,$w,$c
-	maddhdu		$c,$a,$w,$c
-
-___
-}
-
-# Save the last carry as the final entry
-sub mul_last($$$$$)
-{
-	my ($self, $r1, $r2, $a, $w, $c) = @_;
-
-	$self->add_code(<<___);
-	maddld		$r1,$a,$w,$c
-	maddhdu		$r2,$a,$w,$c
-
-___
-}
-
-# Like mul() but $c is ignored as an input - an optimisation to save a
-# preliminary instruction that would set input $c to 0
-sub mul_c_0($$$$$)
-{
-	my ($self, $r, $a, $w, $c) = @_;
-
-	$self->add_code(<<___);
-	mulld          $r,$a,$w
-	mulhdu          $c,$a,$w
-
-___
-}
-
-# Like C mul_add() but allow $r_out and $r_in to be different
-sub mul_add($$$$$$)
-{
-	my ($self, $r_out, $r_in, $a, $w, $c) = @_;
-
-	$self->add_code(<<___);
-	maddld		$lo,$a,$w,$c
-	maddhdu		$c,$a,$w,$c
-	addc		$r_out,$r_in,$lo
-	addze		$c,$c
-
-___
-}
-
-# Like mul_add() but $c is ignored as an input - an optimisation to save a
-# preliminary instruction that would set input $c to 0
-sub mul_add_c_0($$$$$$)
-{
-	my ($self, $r_out, $r_in, $a, $w, $c) = @_;
-
-	$self->add_code(<<___);
-	maddld		$lo,$a,$w,$r_in
-	maddhdu		$c,$a,$w,$r_in
-___
-
-	if ($r_out ne $lo) {
-		$self->add_code(<<___);
-	mr			$r_out,$lo
-___
-	}
-
-	$self->nl();
-}
-
-
-package main;
-
-my $code;
-
-$code.=<<___;
-.machine "any"
-.text
-___
-
-my $mont;
-
-$mont = new Mont::GPR(6);
-$mont->mul_mont_fixed();
-$code .= $mont->get_code();
-
-$mont = new Mont::GPR_300(6);
-$mont->mul_mont_fixed();
-$code .= $mont->get_code();
-
-$code =~ s/\`([^\`]*)\`/eval $1/gem;
-
-$code.=<<___;
-.asciz  "Montgomery Multiplication for PPC by <amitay\@ozlabs.org>, <alastair\@d-silva.org>"
-___
-
-print $code;
-close STDOUT or die "error closing STDOUT: $!";
diff --git a/crypto/bn/bn_ppc.c b/crypto/bn/bn_ppc.c
index 1e9421bee213..3ee76ea96574 100644
--- a/crypto/bn/bn_ppc.c
+++ b/crypto/bn/bn_ppc.c
@@ -19,12 +19,6 @@ int bn_mul_mont(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp,
                         const BN_ULONG *np, const BN_ULONG *n0, int num);
     int bn_mul4x_mont_int(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp,
                           const BN_ULONG *np, const BN_ULONG *n0, int num);
-    int bn_mul_mont_fixed_n6(BN_ULONG *rp, const BN_ULONG *ap,
-                             const BN_ULONG *bp, const BN_ULONG *np,
-                             const BN_ULONG *n0, int num);
-    int bn_mul_mont_300_fixed_n6(BN_ULONG *rp, const BN_ULONG *ap,
-                                 const BN_ULONG *bp, const BN_ULONG *np,
-                                 const BN_ULONG *n0, int num);
 
     if (num < 4)
         return 0;
@@ -40,14 +34,5 @@ int bn_mul_mont(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp,
      * no opportunity to figure it out...
      */
 
-#if defined(_ARCH_PPC64)
-    if (num == 6) {
-        if (OPENSSL_ppccap_P & PPC_MADD300)
-            return bn_mul_mont_300_fixed_n6(rp, ap, bp, np, n0, num);
-        else
-            return bn_mul_mont_fixed_n6(rp, ap, bp, np, n0, num);
-    }
-#endif
-
     return bn_mul_mont_int(rp, ap, bp, np, n0, num);
 }
diff --git a/crypto/bn/build.info b/crypto/bn/build.info
index 987a70ae263b..4f8d0689b5ea 100644
--- a/crypto/bn/build.info
+++ b/crypto/bn/build.info
@@ -79,7 +79,7 @@ IF[{- !$disabled{asm} -}]
 
   $BNASM_ppc32=bn_ppc.c bn-ppc.s ppc-mont.s
   $BNDEF_ppc32=OPENSSL_BN_ASM_MONT
-  $BNASM_ppc64=$BNASM_ppc32 ppc64-mont-fixed.s
+  $BNASM_ppc64=$BNASM_ppc32
   $BNDEF_ppc64=$BNDEF_ppc32
 
   $BNASM_c64xplus=asm/bn-c64xplus.asm
@@ -173,7 +173,6 @@ GENERATE[parisc-mont.s]=asm/parisc-mont.pl
 GENERATE[bn-ppc.s]=asm/ppc.pl
 GENERATE[ppc-mont.s]=asm/ppc-mont.pl
 GENERATE[ppc64-mont.s]=asm/ppc64-mont.pl
-GENERATE[ppc64-mont-fixed.s]=asm/ppc64-mont-fixed.pl
 
 GENERATE[alpha-mont.S]=asm/alpha-mont.pl
 
diff --git a/test/recipes/30-test_evp_data/evppkey_ecdsa.txt b/test/recipes/30-test_evp_data/evppkey_ecdsa.txt
index f36982845db4..1543ed9f7534 100644
--- a/test/recipes/30-test_evp_data/evppkey_ecdsa.txt
+++ b/test/recipes/30-test_evp_data/evppkey_ecdsa.txt
@@ -97,6 +97,18 @@ Key = P-256-PUBLIC
 Input = "Hello World"
 Output = 3046022100e7515177ec3817b77a4a94066ab3070817b7aa9d44a8a09f040da250116e8972022100ba59b0f631258e59a9026be5d84f60685f4cf22b9165a0c2736d5c21c8ec1862
 
+PublicKey=P-384-PUBLIC
+-----BEGIN PUBLIC KEY-----
+MHYwEAYHKoZIzj0CAQYFK4EEACIDYgAES/TlL5WEJ+u1kV+4yVlVUbTTo/2rZ7rd
+nWwwk/QlukNjDfcfQvDrfOqpTZ9kSKhd0wMxWIJJ/S/cCzCex+2EgbwW8ngAwT19
+twD8guGxyFRaoMDTtW47/nifwYqRaIfC
+-----END PUBLIC KEY-----
+
+DigestVerify = SHA384
+Key = P-384-PUBLIC
+Input = "123400"
+Output = 304d0218389cb27e0bc8d21fa7e5f24cb74f58851313e696333ad68b023100ffffffffffffffffffffffffffffffffffffffffffffffffc7634d81f4372ddf581a0db248b0a77aecec196accc52970
+
 # Oneshot tests
 OneShotDigestVerify = SHA256
 Key = P-256-PUBLIC