# workaround LTO related issue when stripping the target files (#1863378) %global __brp_strip_lto %{nil} %global cross cross %global rpmprefix %{nil} %global build_all 1 %global build_aarch64 %{build_all} %global build_alpha %{build_all} %global build_arm %{build_all} %global build_arc %{build_all} %global build_avr32 %{build_all} %global build_blackfin %{build_all} %global build_c6x %{build_all} %global build_cris %{build_all} %global build_frv %{build_all} %global build_h8300 %{build_all} %global build_hppa %{build_all} %global build_hppa64 %{build_all} %global build_ia64 %{build_all} %global build_m32r %{build_all} %global build_m68k %{build_all} %global build_microblaze %{build_all} %global build_mips64 %{build_all} %global build_mn10300 %{build_all} %global build_nios2 %{build_all} %global build_openrisc %{build_all} %global build_powerpc64 %{build_all} %global build_powerpc64le %{build_all} %global build_riscv64 %{build_all} %global build_s390x %{build_all} %global build_sh %{build_all} %global build_sparc64 %{build_all} %global build_tile %{build_all} %global build_x86_64 %{build_all} %global build_xtensa %{build_all} # built compiler generates lots of ICEs # - none at this time # gcc considers obsolete %global build_score 0 %global build_sh64 0 %global build_sh 0 %global build_cris 0 # gcc doesn't build # - none at this time # 32-bit packages we don't build as we can use the 64-bit package instead %global build_i386 0 %global build_mips 0 %global build_powerpc 0 %global build_s390 0 %global build_sh4 0 %global build_sparc 0 # gcc doesn't support %global build_metag 0 # not available in binutils-2.22 %global build_unicore32 0 %global multilib_64_archs sparc64 ppc64 s390x x86_64 # we won't build libgcc for these as it depends on C library or kernel headers # % global no_libgcc_targets nios2*|tile-* %global no_libgcc_targets none ############################################################################### # # The gcc versioning information. In a sed command below, the specfile winds # pre-release version numbers in BASE-VER back to the last actually-released # number. %global DATE 20210728 %global gitrev 134ab8155c937122663513b76afa8e64ad61fe99 %global gcc_version 11.2.1 %global gcc_major 11 # Note, cross_gcc_release must be integer, if you want to add suffixes # to %%{release}, append them after %%{cross_gcc_release} on Release: # line. gcc_release is the Fedora gcc release that the patches were # taken from. %global gcc_release 1 %global cross_gcc_release 1 %global cross_binutils_version 2.35.1 %global isl_version 0.16.1 %global isl_libmajor 15 %global _performance_build 1 # Hardening slows the compiler way too much. %undefine _hardened_build Summary: Cross C compiler Name: %{cross}-gcc Version: %{gcc_version} Release: %{cross_gcc_release}%{?dist} # libgcc, libgfortran, libmudflap, libgomp, libstdc++ and crtstuff have # GCC Runtime Exception. License: GPLv3+ and GPLv3+ with exceptions and GPLv2+ with exceptions and LGPLv2+ and BSD URL: http://gcc.gnu.org BuildRequires: gcc-c++ autoconf BuildRequires: isl-devel >= %{isl_version} # The source for this package was pulled from upstream's vcs. Use the # following commands to generate the tarball: # git clone --depth 1 git://gcc.gnu.org/git/gcc.git gcc-dir.tmp # git --git-dir=gcc-dir.tmp/.git fetch --depth 1 origin %%{gitrev} # git --git-dir=gcc-dir.tmp/.git archive --prefix=%%{name}-%%{version}-%%{DATE}/ %%{gitrev} | xz -9e > %%{name}-%%{version}-%%{DATE}.tar.xz # rm -rf gcc-dir.tmp %global srcdir gcc-%{version}-%{DATE} Source0: %{srcdir}.tar.xz Patch0: gcc11-hack.patch Patch2: gcc11-sparc-config-detection.patch Patch3: gcc11-libgomp-omp_h-multilib.patch Patch4: gcc11-libtool-no-rpath.patch Patch8: gcc11-no-add-needed.patch Patch9: gcc11-foffload-default.patch Patch10: gcc11-Wno-format-security.patch Patch11: gcc11-rh1574936.patch Patch12: gcc11-d-shared-libphobos.patch Patch13: gcc11-pr99341-revert.patch Patch900: cross-intl-filename.patch Patch901: cross-gcc-format-config.patch Patch902: cross-gcc-config.patch %if 0%{?fedora} >= 29 || 0%{?rhel} > 7 BuildRequires: binutils >= 2.31 %else BuildRequires: binutils >= 2.24 %endif BuildRequires: zlib-devel, gettext, dejagnu, bison, flex, texinfo, sharutils BuildRequires: %{cross}-binutils-common >= %{cross_binutils_version} # Make sure pthread.h doesn't contain __thread tokens # Make sure glibc supports stack protector # Make sure glibc supports DT_GNU_HASH BuildRequires: glibc-devel >= 2.4.90-13 BuildRequires: elfutils-devel >= 0.147 BuildRequires: elfutils-libelf-devel >= 0.147 BuildRequires: gmp-devel >= 4.1.2-8, mpfr-devel >= 2.2.1, libmpc-devel >= 0.8.1 Provides: bundled(libiberty) %description Cross-build GNU C compiler collection. %package -n %{cross}-gcc-common Summary: Cross-build GNU C compiler documentation and translation files BuildArch: noarch %description -n %{cross}-gcc-common Documentation, manual pages and translation files for cross-build GNU C compiler. This is the common part of a set of cross-build GNU C compiler packages for building kernels for other architectures. No support for cross-building user space programs is currently supplied as that would massively multiply the number of packages. ############################################################################### # # Conditional arch package definition # ############################################################################### %global do_package() \ %if %2 \ %package -n %{rpmprefix}gcc-%1 \ Summary: Cross-build binary utilities for %1 \ Requires: %{cross}-gcc-common == %{version}-%{release} \ BuildRequires: %{rpmprefix}binutils-%1 >= %{cross_binutils_version} \ Requires: %{rpmprefix}binutils-%1 >= %{cross_binutils_version} \ %if 0%{?__isa_bits} == 64 \ Requires: libisl.so.%{isl_libmajor}()(64bit) \ %else \ Requires: libisl.so.%{isl_libmajor} \ %endif \ %description -n %{rpmprefix}gcc-%1 \ Cross-build GNU C compiler. \ \ Only building kernels is currently supported. Support for cross-building \ user space programs is not currently provided as that would massively multiply \ the number of packages. \ \ %package -n %{rpmprefix}gcc-c++-%1 \ Summary: Cross-build binary utilities for %1 \ Requires: %{rpmprefix}gcc-%1 == %{version}-%{release} \ %description -n %{rpmprefix}gcc-c++-%1 \ Cross-build GNU C++ compiler. \ \ Only the compiler is provided; not libstdc++. Support for cross-building \ user space programs is not currently provided as that would massively multiply \ the number of packages. \ %endif %global do_symlink() \ %if %2 \ %package -n gcc-%1 \ Summary: Cross-build binary utilities for %1 \ Requires: gcc-%3 == %{version}-%{release} \ %description -n gcc-%1 \ Cross-build GNU C++ compiler. \ \ Only building kernels is currently supported. Support for cross-building \ user space programs is not currently provided as that would massively multiply \ the number of packages. \ \ %package -n gcc-c++-%1 \ Summary: Cross-build binary utilities for %1 \ Requires: gcc-%1 == %{version}-%{release} \ Requires: gcc-c++-%3 == %{version}-%{release} \ %description -n gcc-c++-%1 \ Cross-build GNU C++ compiler. \ \ Only the compiler is provided; not libstdc++. Support for cross-building \ user space programs is not currently provided as that would massively multiply \ the number of packages. \ %endif %do_package aarch64-linux-gnu %{build_aarch64} %do_package alpha-linux-gnu %{build_alpha} %do_package arc-linux-gnu %{build_arc} %do_package arm-linux-gnu %{build_arm} %do_package avr32-linux-gnu %{build_avr32} %do_package bfin-linux-gnu %{build_blackfin} %do_package c6x-linux-gnu %{build_c6x} %do_package cris-linux-gnu %{build_cris} %do_package frv-linux-gnu %{build_frv} %do_package h8300-linux-gnu %{build_h8300} %do_package hppa-linux-gnu %{build_hppa} %do_package hppa64-linux-gnu %{build_hppa64} %do_package i386-linux-gnu %{build_i386} %do_package ia64-linux-gnu %{build_ia64} %do_package m32r-linux-gnu %{build_m32r} %do_package m68k-linux-gnu %{build_m68k} %do_package metag-linux-gnu %{build_metag} %do_package microblaze-linux-gnu %{build_microblaze} %do_package mips-linux-gnu %{build_mips} %do_package mips64-linux-gnu %{build_mips64} %do_package mn10300-linux-gnu %{build_mn10300} %do_package nios2-linux-gnu %{build_nios2} %do_package openrisc-linux-gnu %{build_openrisc} %do_package powerpc-linux-gnu %{build_powerpc} %do_package powerpc64-linux-gnu %{build_powerpc64} %do_package powerpc64le-linux-gnu %{build_powerpc64le} %do_symlink ppc-linux-gnu %{build_powerpc} powerpc-linux-gnu %do_symlink ppc64-linux-gnu %{build_powerpc64} powerpc64-linux-gnu %do_symlink ppc64le-linux-gnu %{build_powerpc64le} powerpc64le-linux-gnu %do_package riscv64-linux-gnu %{build_riscv64} %do_package s390-linux-gnu %{build_s390} %do_package s390x-linux-gnu %{build_s390x} %do_package score-linux-gnu %{build_score} %do_package sh-linux-gnu %{build_sh} %do_package sh4-linux-gnu %{build_sh4} %do_package sh64-linux-gnu %{build_sh64} %do_package sparc-linux-gnu %{build_sparc} %do_package sparc64-linux-gnu %{build_sparc64} %do_package tile-linux-gnu %{build_tile} %do_package unicore32-linux-gnu %{build_unicore32} %do_package x86_64-linux-gnu %{build_x86_64} %do_package xtensa-linux-gnu %{build_xtensa} ############################################################################### # # Preparation # ############################################################################### %prep %setup -q -n %{srcdir} -c cd %{srcdir} %patch0 -p0 -b .hack~ %patch2 -p0 -b .sparc-config-detection~ %patch3 -p0 -b .libgomp-omp_h-multilib~ %patch4 -p0 -b .libtool-no-rpath~ %patch8 -p0 -b .no-add-needed~ %patch9 -p0 -b .foffload-default~ %patch10 -p0 -b .Wno-format-security~ %if 0%{?fedora} >= 29 || 0%{?rhel} > 7 %patch11 -p0 -b .rh1574936~ %endif %patch12 -p0 -b .d-shared-libphobos~ %patch13 -p0 -b .pr99341-revert~ %patch900 -p0 -b .cross-intl~ %patch901 -p0 -b .format-config~ %patch902 -p0 -b .config echo 'Red Hat Cross %{version}-%{cross_gcc_release}' > gcc/DEV-PHASE echo 'TM_H += $(srcdir)/config/rs6000/rs6000-modes.h' >> gcc/config/rs6000/t-rs6000 pushd libiberty autoconf -f popd pushd intl autoconf -f popd ./contrib/gcc_update --touch LC_ALL=C sed -i -e 's/\xa0/ /' gcc/doc/options.texi sed -i -e 's/Common Driver Var(flag_report_bug)/& Init(1)/' gcc/common.opt # This test causes fork failures, because it spawns way too many threads rm -f gcc/testsuite/go.test/test/chan/goroutines.go function prep_target () { target=$1 cond=$2 if [ $cond != 0 ] then echo $1 >&5 fi } cd .. ( prep_target aarch64-linux-gnu %{build_aarch64} prep_target alpha-linux-gnu %{build_alpha} prep_target arc-linux-gnu %{build_arc} prep_target arm-linux-gnu %{build_arm} prep_target avr32-linux-gnu %{build_avr32} prep_target bfin-linux-gnu %{build_blackfin} prep_target c6x-linux-gnu %{build_c6x} prep_target cris-linux-gnu %{build_cris} prep_target frv-linux-gnu %{build_frv} prep_target h8300-linux-gnu %{build_h8300} prep_target hppa-linux-gnu %{build_hppa} prep_target hppa64-linux-gnu %{build_hppa64} prep_target i386-linux-gnu %{build_i386} prep_target ia64-linux-gnu %{build_ia64} prep_target m32r-linux-gnu %{build_m32r} prep_target m68k-linux-gnu %{build_m68k} prep_target metag-linux-gnu %{build_metag} prep_target microblaze-linux-gnu %{build_microblaze} prep_target mips-linux-gnu %{build_mips} prep_target mips64-linux-gnu %{build_mips64} prep_target mn10300-linux-gnu %{build_mn10300} prep_target nios2-linux-gnu %{build_nios2} prep_target openrisc-linux-gnu %{build_openrisc} prep_target powerpc-linux-gnu %{build_powerpc} prep_target powerpc64-linux-gnu %{build_powerpc64} prep_target powerpc64le-linux-gnu %{build_powerpc64le} prep_target riscv64-linux-gnu %{build_riscv64} prep_target s390-linux-gnu %{build_s390} prep_target s390x-linux-gnu %{build_s390x} prep_target score-linux-gnu %{build_score} prep_target sh-linux-gnu %{build_sh} prep_target sh4-linux-gnu %{build_sh4} prep_target sh64-linux-gnu %{build_sh64} prep_target sparc-linux-gnu %{build_sparc} prep_target sparc64-linux-gnu %{build_sparc64} prep_target tile-linux-gnu %{build_tile} prep_target unicore32-linux-gnu %{build_unicore32} prep_target x86_64-linux-gnu %{build_x86_64} prep_target xtensa-linux-gnu %{build_xtensa} ) 5>target.list n=0 for target in `cat target.list` do n=1 break done if [ $n = 0 ] then echo "No targets selected" >&2 exit 8 fi ############################################################################### # # Build # ############################################################################### %build %global builddir %{_builddir}/%{srcdir} # Undo the broken autoconf change in recent Fedora versions export CONFIG_SITE=NONE CC=gcc CXX=g++ OPT_FLAGS=`echo %{optflags}|sed -e 's/\(-Wp,\)\?-D_FORTIFY_SOURCE=[12]//g'` OPT_FLAGS=`echo $OPT_FLAGS|sed -e 's/-flto=auto//g;s/-flto//g;s/-ffat-lto-objects//g'` OPT_FLAGS=`echo $OPT_FLAGS|sed -e 's/-m64//g;s/-m32//g;s/-m31//g'` OPT_FLAGS=`echo $OPT_FLAGS|sed -e 's/-mfpmath=sse/-mfpmath=sse -msse2/g'` OPT_FLAGS=`echo $OPT_FLAGS|sed -e 's/ -pipe / /g'` OPT_FLAGS=`echo $OPT_FLAGS|sed -e 's/ -g / -g1 /g'` %ifarch sparc OPT_FLAGS=`echo $OPT_FLAGS|sed -e 's/-mcpu=ultrasparc/-mtune=ultrasparc/g;s/-mcpu=v[78]//g'` %endif %ifarch %{ix86} OPT_FLAGS=`echo $OPT_FLAGS|sed -e 's/-march=i.86//g'` %endif OPT_FLAGS=`echo $OPT_FLAGS|sed -e 's/-Werror=format-security/-Wformat-security/g'` OPT_FLAGS=`echo "$OPT_FLAGS" | sed -e 's/[[:blank:]]\+/ /g'` case "$OPT_FLAGS" in *-fasynchronous-unwind-tables*) sed -i -e 's/-fno-exceptions /-fno-exceptions -fno-asynchronous-unwind-tables /' \ %{srcdir}/libgcc/Makefile.in ;; esac # # Configure the compiler # cd %{builddir} function config_target () { echo "=== CONFIGURING $1" arch=$1 prefix=$arch- build_dir=$1 case $arch in aarch64-*) target=aarch64-linux-gnu;; arc-*) target=arc-linux-gnu;; arm-*) target=arm-linux-gnueabi;; avr32-*) target=avr-linux;; bfin-*) target=bfin-uclinux;; c6x-*) target=c6x-uclinux;; h8300-*) target=h8300-elf;; mn10300-*) target=am33_2.0-linux;; m68knommu-*) target=m68k-linux;; openrisc-*) target=or1k-linux;; parisc-*) target=hppa-linux;; score-*) target=score-elf;; sh64-*) target=sh64-linux-elf;; tile-*) target=tilegx-linux;; v850-*) target=v850e-linux;; x86-*) target=x86_64-linux;; *) target=$arch;; esac echo $arch: target is $target #export CFLAGS="$RPM_OPT_FLAGS" CONFIG_FLAGS= case $arch in arc-*) CONFIG_FLAGS="--with-cpu=hs38" ;; arm-*) CONFIG_FLAGS="--with-tune=generic-armv7-a --with-arch=armv7-a \ --with-float=hard --with-fpu=vfpv3-d16 --with-abi=aapcs-linux" ;; mips64-*) CONFIG_FLAGS="--with-arch=mips64r2 --with-abi=64 --with-arch_32=mips32r2 --with-fp-32=xx" ;; powerpc-*|powerpc64-*|ppc-*|ppc64-*) CONFIG_FLAGS="--with-cpu-32=power7 --with-tune-32=power8 --with-cpu-64=power7 --with-tune-64=power8 --enable-secureplt" ;; powerpc64le-*|ppc64le-*) CONFIG_FLAGS="--with-cpu-32=power8 --with-tune-32=power8 --with-cpu-64=power8 --with-tune-64=power8 --enable-secureplt" ;; s390*-*) %if 0%{?fedora} >= 26 || 0%{?rhel} > 7 CONFIG_FLAGS="--with-arch=zEC12 --with-tune=z13 --enable-decimal-float" %else CONFIG_FLAGS="--with-arch=z9-109 --with-tune=z10 --enable-decimal-float" %endif ;; sh-*) CONFIG_FLAGS=--with-multilib-list=m1,m2,m2e,m2a,m2a-single,m4,m4-single,m4-single-only,m4-nofpu ;; sh4-*) CONFIG_FLAGS=--with-multilib-list=m4,m4-single,m4-single-only,m4-nofpu ;; sh64-*) CONFIG_FLAGS=--with-multilib-list=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;; sparc-*) CONFIG_FLAGS="--disable-linux-futex --with-cpu=v7" ;; sparc64-*) CONFIG_FLAGS="--disable-linux-futex --with-cpu=ultrasparc" ;; tile-*) #CONFIG_FLAGS="--with-arch_32=tilepro" ;; x86_64-*) CONFIG_FLAGS="--with-arch_32=i686 --with-tune=generic --enable-cet" ;; esac case $arch in alpha*|powerpc*|ppc*|s390*|sparc*) CONFIG_FLAGS="$CONFIG_FLAGS --with-long-double-128" ;; esac case $arch in i[3456]86*|x86_64*|ppc*|ppc64*|s390*|arm*|aarch64*|mips*) CONFIG_FLAGS="$CONFIG_FLAGS --enable-gnu-indirect-function" ;; esac %ifnarch %{mips} case $arch in mips*) ;; *) CONFIG_FLAGS="$CONFIG_FLAGS --with-linker-hash-style=gnu" ;; esac %endif mkdir $build_dir cd $build_dir # We could optimize the cross builds size by --enable-shared but the produced # binaries may be less convenient in the embedded environment. CC="$CC" \ CXX="$CXX" \ CFLAGS="$OPT_FLAGS" \ CXXFLAGS="`echo " $OPT_FLAGS " | sed 's/ -Wall / /g;s/ -fexceptions / /g' \ | sed 's/ -Wformat-security / -Wformat -Wformat-security /'`" \ CFLAGS_FOR_TARGET="-g -O2 -Wall -fexceptions" \ AR_FOR_TARGET=%{_bindir}/$arch-ar \ AS_FOR_TARGET=%{_bindir}/$arch-as \ DLLTOOL_FOR_TARGET=%{_bindir}/$arch-dlltool \ LD_FOR_TARGET=%{_bindir}/$arch-ld \ NM_FOR_TARGET=%{_bindir}/$arch-nm \ OBJDUMP_FOR_TARGET=%{_bindir}/$arch-objdump \ RANLIB_FOR_TARGET=%{_bindir}/$arch-ranlib \ READELF_FOR_TARGET=%{_bindir}/$arch-readelf \ STRIP_FOR_TARGET=%{_bindir}/$arch-strip \ WINDRES_FOR_TARGET=%{_bindir}/$arch-windres \ WINDMC_FOR_TARGET=%{_bindir}/$arch-windmc \ LDFLAGS='-Wl,-z,relro ' \ ../%{srcdir}/configure \ --bindir=%{_bindir} \ --build=%{_target_platform} \ --datadir=%{_datadir} \ --disable-decimal-float \ --disable-dependency-tracking \ --disable-gold \ --disable-libgcj \ --disable-libgomp \ --disable-libmpx \ --disable-libquadmath \ --disable-libssp \ --disable-libunwind-exceptions \ --disable-shared \ --disable-silent-rules \ --disable-sjlj-exceptions \ --disable-threads \ --with-ld=/usr/bin/$arch-ld \ --enable-__cxa_atexit \ --enable-checking=release \ --enable-gnu-unique-object \ --enable-initfini-array \ --enable-languages=c,c++ \ --enable-linker-build-id \ --enable-lto \ --enable-nls \ --enable-obsolete \ --enable-plugin \ %ifarch ppc ppc64 ppc64le ppc64p7 --enable-secureplt \ %endif --enable-targets=all \ --exec-prefix=%{_exec_prefix} \ --host=%{_target_platform} \ --includedir=%{_includedir} \ --infodir=%{_infodir} \ --libexecdir=%{_libexecdir} \ --localstatedir=%{_localstatedir} \ --mandir=%{_mandir} \ --prefix=%{_prefix} \ --program-prefix=$prefix \ --sbindir=%{_sbindir} \ --sharedstatedir=%{_sharedstatedir} \ --sysconfdir=%{_sysconfdir} \ --target=$target \ --with-bugurl=http://bugzilla.powerel.org/bugzilla/ \ --with-gcc-major-version-only \ --with-isl \ --with-newlib \ --with-plugin-ld=%{_bindir}/$arch-ld \ --with-sysroot=%{_prefix}/$arch/sys-root \ --with-system-libunwind \ --with-system-zlib \ --without-headers \ $CONFIG_FLAGS %if 0 --libdir=%{_libdir} # we want stuff in /usr/lib/gcc/ not /usr/lib64/gcc %endif cd .. } for target in `cat target.list` do config_target $target done function build_target () { echo "=== BUILDING $1" arch=$1 build_dir=$1 BUILD_FLAGS= case $arch in x86_64-*) BUILD_FLAGS="gcc_cv_libc_provides_ssp=yes gcc_cv_as_ix86_tlsldm=yes" ;; esac AR_FOR_TARGET=%{_bindir}/$arch-ar \ AS_FOR_TARGET=%{_bindir}/$arch-as \ DLLTOOL_FOR_TARGET=%{_bindir}/$arch-dlltool \ LD_FOR_TARGET=%{_bindir}/$arch-ld \ NM_FOR_TARGET=%{_bindir}/$arch-nm \ OBJDUMP_FOR_TARGET=%{_bindir}/$arch-objdump \ RANLIB_FOR_TARGET=%{_bindir}/$arch-ranlib \ READELF_FOR_TARGET=%{_bindir}/$arch-readelf \ STRIP_FOR_TARGET=%{_bindir}/$arch-strip \ WINDRES_FOR_TARGET=%{_bindir}/$arch-windres \ WINDMC_FOR_TARGET=%{_bindir}/$arch-windmc \ make -C $build_dir %{_smp_mflags} tooldir=%{_prefix} $BUILD_FLAGS all-gcc echo "=== BUILDING LIBGCC $1" case $arch in %{no_libgcc_targets}) ;; *) make -C $build_dir tooldir=%{_prefix} all-target-libgcc ;; esac } for target in `cat target.list` do build_target $target done ############################################################################### # # Installation # ############################################################################### %install rm -rf %{buildroot} function install_bin () { echo "=== INSTALLING $1" arch=$1 cpu=${1%%%%-*} case $arch in %{no_libgcc_targets}) with_libgcc="";; *) with_libgcc="install-target-libgcc";; esac make -C $arch DESTDIR=%{buildroot} install-gcc ${with_libgcc} # We want links for ppc and ppc64 also if we make powerpc, powerpc64 or powerpc64le case $cpu in powerpc*) cd %{buildroot}/usr/bin for i in $cpu-* do ln -s $i ppc${i#powerpc} done cd - ;; esac } for target in `cat target.list` do mkdir -p %{buildroot}%{_prefix}/$target/sys-root install_bin $target done grep ^powerpc target.list | sed -e s/powerpc/ppc/ >symlink-target.list # For cross-gcc we drop the documentation. rm -rf %{buildroot}%{_infodir} # Remove binaries we will not be including, so that they don't end up in # gcc-debuginfo rm -f %{buildroot}%{_libdir}/{libffi*,libiberty.a} rm -f %{buildroot}%{_libexecdir}/gcc/*/%{gcc_major}/install-tools/{mkheaders,fixincl} rm -f %{buildroot}%{_prefix}/bin/*-gcc-%{gcc_major} || : rmdir %{buildroot}%{_includedir} find %{buildroot}%{_datadir} -name gcc.mo | while read x do y=`dirname $x` mv $x $y/%{cross}-gcc.mo done %find_lang %{cross}-gcc gzip %{buildroot}%{_mandir}/man1/*.1 rm %{buildroot}%{_mandir}/man7/*.7 rmdir %{buildroot}%{_mandir}/man7 # All the installed manual pages and translation files for each program are the # same, so symlink them to the common package cd %{buildroot}%{_mandir}/man1 for i in %{cross}-cpp.1.gz %{cross}-gcc.1.gz %{cross}-g++.1.gz %{cross}-gcov.1.gz do j=${i#%{cross}-} for k in *-$j do if [ $k != $i -a ! -L $k ] then mv $k $i ln -s $i $k fi done done # Add manpages the additional symlink-only targets %if %{build_powerpc}%{build_powerpc64}%{build_powerpc64le} for i in powerpc* do ln -s $i ppc${i#powerpc} done %endif cd - function install_lang () { arch=$1 cpu=${arch%%%%-*} case $cpu in avr32) target_cpu=avr;; bfin) target_cpu=bfin;; h8300) target_cpu=h8300;; mn10300) target_cpu=am33_2.0;; openrisc) target_cpu=or1k;; parisc) target_cpu=hppa;; score) target_cpu=score;; tile) target_cpu=tilegx;; v850) target_cpu=v850e;; x86) target_cpu=x86_64;; *) target_cpu=$cpu;; esac ( echo '%{_bindir}/'$arch'*-cpp' echo '%{_bindir}/'$arch'*-gcc' echo '%{_bindir}/'$arch'*-gcc-ar' echo '%{_bindir}/'$arch'*-gcc-nm' echo '%{_bindir}/'$arch'*-gcc-ranlib' echo '%{_bindir}/'$arch'*-gcov*' echo '%{_bindir}/'$arch'*-lto-dump' echo '%{_mandir}/man1/'$arch'*-cpp*' echo '%{_mandir}/man1/'$arch'*-gcc*' echo '%{_mandir}/man1/'$arch'*-gcov*' echo '%{_mandir}/man1/'$arch'*-lto-dump*' case $cpu in ppc*|ppc64*) ;; *) echo '/usr/lib/gcc/'$target_cpu'-*/' echo '%{_libexecdir}/gcc/'$target_cpu'*/*/cc1' echo '%{_libexecdir}/gcc/'$target_cpu'*/*/collect2' echo '%{_libexecdir}/gcc/'$target_cpu'*/*/[abd-z]*' echo %{_prefix}/$arch/sys-root ;; esac ) >files.$arch ( echo '%{_bindir}/'$arch'*-c++' echo '%{_bindir}/'$arch'*-g++' echo '%{_mandir}/man1/'$arch'*-g++*' case $cpu in ppc*|ppc64*) ;; *) echo '%{_libexecdir}/gcc/'$target_cpu'*/*/cc1plus' esac ) >files-c++.$arch } for target in `cat target.list symlink-target.list` do install_lang $target done %global __ar_no_strip $RPM_BUILD_DIR/%{srcdir}/ar-no-strip cat >%{__ar_no_strip} < - 11.2.1-1 - Update to gcc 11.2.1 * Sat Jul 24 2021 Peter Robinson - 11.1.1-1 - Update to gcc 11.1.1 - Enable OpenRISC (or1k) support - Disable sh/crui support * Wed Jul 21 2021 Fedora Release Engineering - 10.2.1-3.3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild * Thu Mar 11 2021 Dan Horák - 10.2.1-3.2 - reduce debuginfo verbosity * Tue Jan 26 2021 Fedora Release Engineering - 10.2.1-3.1 - Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild * Fri Sep 04 2020 Peter Robinson - 10.2.1-3 - GCC 10.2.0 release * Sat Aug 01 2020 Fedora Release Engineering - 10.1.1-2.2 - Second attempt - Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild * Mon Jul 27 2020 Fedora Release Engineering - 10.1.1-2.1 - Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild * Mon Jul 20 2020 Jeff Law - 10.1.1-2 - Fix broken configure files compromised by LTO - Add autoconf to BuildRequires * Fri May 08 2020 Peter Robinson - 10.1.1-1 - GCC 10.1.0 release * Thu Apr 30 2020 Peter Robinson - 10.0.1-0.13 - Update to gcc 10 snapshot 0.13 * Tue Jan 28 2020 Fedora Release Engineering - 9.2.1-3.1 - Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild * Sat Dec 14 2019 Jeff Law - 9.2.1-3 - Fix unprintable control character in PA backend caught by gcc-10 * Wed Oct 9 2019 Jerry James - 9.2.1-2 - Rebuild for mpfr 4 * Tue Aug 27 2019 Peter Robinson 9.2.1-1 - Sync with gcc-9.2.1-1 * Wed Jul 24 2019 Fedora Release Engineering - 9.1.1-2.1 - Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild * Mon Jun 10 2019 Tom Callaway - 9.1.1-2 - remove shared support from arm (glibc-arm-linux-gnu is dead) * Sun May 26 2019 Peter Robinson 9.1.1-1 - Sync with gcc-9.1.1-1 * Thu Jan 31 2019 Fedora Release Engineering - 8.2.1-1.2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild * Wed Nov 7 2018 Tom Callaway - 8.2.1-1 - update to 8.2.1 * Thu Jul 12 2018 Fedora Release Engineering - 8.1.1-3.1 - Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild * Thu Jul 12 2018 David Howells - 8.1.1-3 - Change ARC to multilib (#1600183). - Fix arc700 cpu type (#1600183). * Wed Jul 11 2018 David Howells - 8.1.1-3 - Switch ARC to arc-linux-gnu and use hs38 not arc700 (#1600183). * Tue Jul 10 2018 David Howells - 8.1.1-2 - Sync with gcc-8.1.1-4. - Add support for the ARC arch (#1599744). * Tue May 29 2018 David Howells - 8.1.1-1 - Sync with gcc-8.1.1-1. * Fri Mar 30 2018 David Howells - 8.0.1-0.1 - Move to gcc-8 (#1580076).