You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

283 lines
9.7 KiB

--- Python-2.7.4/Modules/Setup.dist.rhconfig 2013-04-06 16:02:34.000000000 +0200
+++ Python-2.7.4/Modules/Setup.dist 2013-04-08 10:05:16.369985654 +0200
@@ -153,7 +153,7 @@ GLHACK=-Dclear=__GLclear
# modules are to be built as shared libraries (see above for more
# detail; also note that *static* reverses this effect):
-#*shared*
+*shared*
# GNU readline. Unlike previous Python incarnations, GNU readline is
# now incorporated in an optional module, configured in the Setup file
@@ -163,77 +163,77 @@ GLHACK=-Dclear=__GLclear
# it, depending on your system -- see the GNU readline instructions.
# It's okay for this to be a shared library, too.
-#readline readline.c -lreadline -ltermcap
+readline readline.c -lreadline -ltermcap
# Modules that should always be present (non UNIX dependent):
-#array arraymodule.c # array objects
-#cmath cmathmodule.c _math.c # -lm # complex math library functions
-#math mathmodule.c _math.c # -lm # math library functions, e.g. sin()
-#_struct _struct.c # binary structure packing/unpacking
-#time timemodule.c # -lm # time operations and variables
-#operator operator.c # operator.add() and similar goodies
-#_testcapi _testcapimodule.c # Python C API test module
-#_random _randommodule.c # Random number generator
-#_collections _collectionsmodule.c # Container types
+array arraymodule.c # array objects
+cmath cmathmodule.c _math.c # -lm # complex math library functions
+math mathmodule.c _math.c # -lm # math library functions, e.g. sin()
+_struct _struct.c # binary structure packing/unpacking
+time timemodule.c # -lm # time operations and variables
+operator operator.c # operator.add() and similar goodies
+_testcapi _testcapimodule.c # Python C API test module
+_random _randommodule.c # Random number generator
+_collections _collectionsmodule.c # Container types
#_heapq _heapqmodule.c # Heapq type
-#itertools itertoolsmodule.c # Functions creating iterators for efficient looping
-#strop stropmodule.c # String manipulations
-#_functools _functoolsmodule.c # Tools for working with functions and callable objects
+itertools itertoolsmodule.c # Functions creating iterators for efficient looping
+strop stropmodule.c # String manipulations
+_functools _functoolsmodule.c # Tools for working with functions and callable objects
#_elementtree -I$(srcdir)/Modules/expat -DHAVE_EXPAT_CONFIG_H -DUSE_PYEXPAT_CAPI _elementtree.c # elementtree accelerator
#_pickle _pickle.c # pickle accelerator
#datetime datetimemodule.c # date/time type
-#_bisect _bisectmodule.c # Bisection algorithms
+_bisect _bisectmodule.c # Bisection algorithms
-#unicodedata unicodedata.c # static Unicode character database
+unicodedata unicodedata.c # static Unicode character database
# access to ISO C locale support
-#_locale _localemodule.c # -lintl
+_locale _localemodule.c # -lintl
# Standard I/O baseline
#_io -I$(srcdir)/Modules/_io _io/bufferedio.c _io/bytesio.c _io/fileio.c _io/iobase.c _io/_iomodule.c _io/stringio.c _io/textio.c
# Modules with some UNIX dependencies -- on by default:
# (If you have a really backward UNIX, select and socket may not be
# supported...)
-#fcntl fcntlmodule.c # fcntl(2) and ioctl(2)
-#spwd spwdmodule.c # spwd(3)
-#grp grpmodule.c # grp(3)
-#select selectmodule.c # select(2); not on ancient System V
+fcntl fcntlmodule.c # fcntl(2) and ioctl(2)
+spwd spwdmodule.c # spwd(3)
+grp grpmodule.c # grp(3)
+select selectmodule.c # select(2); not on ancient System V
# Memory-mapped files (also works on Win32).
-#mmap mmapmodule.c
+mmap mmapmodule.c
# CSV file helper
-#_csv _csv.c
+_csv _csv.c
# Socket module helper for socket(2)
-#_socket socketmodule.c timemodule.c
+_socket socketmodule.c timemodule.c
# Socket module helper for SSL support; you must comment out the other
# socket line above, and possibly edit the SSL variable:
#SSL=/usr/local/ssl
-#_ssl _ssl.c \
-# -DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \
-# -L$(SSL)/lib -lssl -lcrypto
+_ssl _ssl.c \
+ -DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \
+ -L$(SSL)/lib -lssl -lcrypto
# The crypt module is now disabled by default because it breaks builds
# on many systems (where -lcrypt is needed), e.g. Linux (I believe).
#
# First, look at Setup.config; configure may have set this for you.
-#crypt cryptmodule.c # -lcrypt # crypt(3); needs -lcrypt on some systems
+crypt cryptmodule.c # -lcrypt # crypt(3); needs -lcrypt on some systems
# Some more UNIX dependent modules -- off by default, since these
# are not supported by all UNIX systems:
-#nis nismodule.c -lnsl # Sun yellow pages -- not everywhere
-#termios termios.c # Steen Lumholt's termios module
-#resource resource.c # Jeremy Hylton's rlimit interface
+nis nismodule.c -lnsl # Sun yellow pages -- not everywhere
+termios termios.c # Steen Lumholt's termios module
+resource resource.c # Jeremy Hylton's rlimit interface
# Multimedia modules -- off by default.
@@ -238,8 +238,8 @@ GLHACK=-Dclear=__GLclear
# #993173 says audioop works on 64-bit platforms, though.
# These represent audio samples or images as strings:
-#audioop audioop.c # Operations on audio samples
-#imageop imageop.c # Operations on images
+audioop audioop.c # Operations on audio samples
+imageop imageop.c # Operations on images
# Note that the _md5 and _sha modules are normally only built if the
@@ -249,14 +249,14 @@ GLHACK=-Dclear=__GLclear
# Message-Digest Algorithm, described in RFC 1321. The necessary files
# md5.c and md5.h are included here.
-#_md5 md5module.c md5.c
+_md5 md5module.c md5.c
# The _sha module implements the SHA checksum algorithms.
# (NIST's Secure Hash Algorithms.)
-#_sha shamodule.c
-#_sha256 sha256module.c
-#_sha512 sha512module.c
+_sha shamodule.c
+_sha256 sha256module.c
+_sha512 sha512module.c
# SGI IRIX specific modules -- off by default.
@@ -303,12 +303,12 @@ GLHACK=-Dclear=__GLclear
# A Linux specific module -- off by default; this may also work on
# some *BSDs.
-#linuxaudiodev linuxaudiodev.c
+linuxaudiodev linuxaudiodev.c
# George Neville-Neil's timing module:
-#timing timingmodule.c
+timing timingmodule.c
# The _tkinter module.
@@ -323,7 +323,7 @@ GLHACK=-Dclear=__GLclear
# every system.
# *** Always uncomment this (leave the leading underscore in!):
-# _tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \
+_tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \
# *** Uncomment and edit to reflect where your Tcl/Tk libraries are:
# -L/usr/local/lib \
# *** Uncomment and edit to reflect where your Tcl/Tk headers are:
@@ -333,7 +333,7 @@ GLHACK=-Dclear=__GLclear
# *** Or uncomment this for Solaris:
# -I/usr/openwin/include \
# *** Uncomment and edit for Tix extension only:
-# -DWITH_TIX -ltix8.1.8.2 \
+ -DWITH_TIX -ltix \
# *** Uncomment and edit for BLT extension only:
# -DWITH_BLT -I/usr/local/blt/blt8.0-unoff/include -lBLT8.0 \
# *** Uncomment and edit for PIL (TkImaging) extension only:
@@ -342,7 +342,7 @@ GLHACK=-Dclear=__GLclear
# *** Uncomment and edit for TOGL extension only:
# -DWITH_TOGL togl.c \
# *** Uncomment and edit to reflect your Tcl/Tk versions:
-# -ltk8.2 -ltcl8.2 \
+ -ltk -ltcl \
# *** Uncomment and edit to reflect where your X11 libraries are:
# -L/usr/X11R6/lib \
# *** Or uncomment this for Solaris:
@@ -352,7 +352,7 @@ GLHACK=-Dclear=__GLclear
# *** Uncomment for AIX:
# -lld \
# *** Always uncomment this; X11 libraries to link with:
-# -lX11
+ -lX11
# Lance Ellinghaus's syslog module
#syslog syslogmodule.c # syslog daemon interface
@@ -374,7 +374,7 @@ GLHACK=-Dclear=__GLclear
# it is a highly experimental and dangerous device for calling
# *arbitrary* C functions in *arbitrary* shared libraries:
-#dl dlmodule.c
+dl dlmodule.c
# Modules that provide persistent dictionary-like semantics. You will
@@ -397,7 +397,7 @@ GLHACK=-Dclear=__GLclear
#
# First, look at Setup.config; configure may have set this for you.
-#gdbm gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm
+gdbm gdbmmodule.c -lgdbm
# Sleepycat Berkeley DB interface.
@@ -412,11 +412,9 @@ GLHACK=-Dclear=__GLclear
#
# Edit the variables DB and DBLIBVERto point to the db top directory
# and the subdirectory of PORT where you built it.
-#DB=/usr/local/BerkeleyDB.4.0
-#DBLIBVER=4.0
-#DBINC=$(DB)/include
-#DBLIB=$(DB)/lib
-#_bsddb _bsddb.c -I$(DBINC) -L$(DBLIB) -ldb-$(DBLIBVER)
+DBINC=/usr/include/libdb
+DBLIB=/usr/lib
+_bsddb _bsddb.c -I$(DBINC) -L$(DBLIB) -ldb
# Historical Berkeley DB 1.85
#
@@ -431,14 +430,14 @@ GLHACK=-Dclear=__GLclear
# Helper module for various ascii-encoders
-#binascii binascii.c
+binascii binascii.c
# Fred Drake's interface to the Python parser
-#parser parsermodule.c
+parser parsermodule.c
# cStringIO and cPickle
-#cStringIO cStringIO.c
-#cPickle cPickle.c
+cStringIO cStringIO.c
+cPickle cPickle.c
# Lee Busby's SIGFPE modules.
@@ -461,7 +460,7 @@ GLHACK=-Dclear=__GLclear
# Andrew Kuchling's zlib module.
# This require zlib 1.1.3 (or later).
# See http://www.gzip.org/zlib/
-#zlib zlibmodule.c -I$(prefix)/include -L$(exec_prefix)/lib -lz
+zlib zlibmodule.c -I$(prefix)/include -L$(exec_prefix)/lib -lz
# Interface to the Expat XML parser
#
@@ -480,14 +479,14 @@ GLHACK=-Dclear=__GLclear
# Hye-Shik Chang's CJKCodecs
# multibytecodec is required for all the other CJK codec modules
-#_multibytecodec cjkcodecs/multibytecodec.c
+_multibytecodec cjkcodecs/multibytecodec.c
-#_codecs_cn cjkcodecs/_codecs_cn.c
-#_codecs_hk cjkcodecs/_codecs_hk.c
-#_codecs_iso2022 cjkcodecs/_codecs_iso2022.c
-#_codecs_jp cjkcodecs/_codecs_jp.c
-#_codecs_kr cjkcodecs/_codecs_kr.c
-#_codecs_tw cjkcodecs/_codecs_tw.c
+_codecs_cn cjkcodecs/_codecs_cn.c
+_codecs_hk cjkcodecs/_codecs_hk.c
+_codecs_iso2022 cjkcodecs/_codecs_iso2022.c
+_codecs_jp cjkcodecs/_codecs_jp.c
+_codecs_kr cjkcodecs/_codecs_kr.c
+_codecs_tw cjkcodecs/_codecs_tw.c
# Example -- included for reference only:
# xx xxmodule.c