You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1508 lines
61 KiB
1508 lines
61 KiB
Summary: The mdadm program controls Linux md devices (software RAID arrays) |
|
Name: mdadm |
|
Version: 4.0 |
|
Release: 13%{?dist} |
|
Source: http://www.kernel.org/pub/linux/utils/raid/mdadm/mdadm-%{version}.tar.xz |
|
Source1: mdmonitor.init |
|
Source2: raid-check |
|
Source3: mdadm.rules |
|
Source4: mdadm-raid-check-sysconfig |
|
Source5: mdadm-cron |
|
Source6: mdmonitor.service |
|
Source7: mdadm.conf |
|
Source8: mdadm_event.conf |
|
|
|
Patch1: Makefile-Fix-date-to-be-output-in-ISO-format.patch |
|
Patch2: imsm-fix-missing-error-message-during-migration1.patch |
|
Patch3: Fix-oddity-where-mdadm-did-not-recognise-a-relative-.patch |
|
Patch4: mdadm-fix-typo1-in-comment.patch |
|
Patch5: mdadm-check-the-nodes-when-operate-clustered1-array.patch |
|
Patch6: examine-tidy-up-some-code.patch |
|
Patch7: add-man-page-for-symlinks.patch |
|
Patch8: mdadm-add-checking-clustered2-bitmap-in-assemble-mode.patch |
|
Patch9: mdadm-Add-Wimplicit-fallthrough-0-in-Makefile.patch |
|
Patch10: specify-enough-length-when-write-to-buffer.patch |
|
Patch11: mdadm-fixed-some-trivial-typos-in-comments-of-mdadm.patch |
|
Patch12: mdadm-it-doesn-t-make-sense-to-set-bitmap-twice.patch |
|
Patch13: mdadm-mdmon-deleted-the-abort_reshape-never-invoked.patch |
|
Patch14: mdadm-Monitor-Fix-NULL-pointer-dereference-when-stat.patch |
|
Patch15: Replace-snprintf-with-strncpy-at-some-places-to-avoi.patch |
|
Patch16: mdadm-Forced-type-conversion-to-avoid-truncation.patch |
|
Patch17: super1-ignore-failfast-flag-for-setting-device-role.patch |
|
Patch18: mdadm-bitmap-fixed-typos-in-comments1-of-bitmap.h.patch |
|
Patch19: udev-md-raid-assembly.rules-Skip-non-ready-devices.patch |
|
Patch20: Retry-HOT_REMOVE_DISK-a-few-times.patch |
|
Patch21: mdadm-Build1-check-the-level-parameter-when-build-new.patch |
|
Patch22: Introduce1-sys_hot_remove_disk.patch |
|
Patch23: Add-force-flag1-to-hot_remove_disk.patch |
|
Patch24: Detail-handle-non-existent-arrays-better.patch |
|
Patch25: generic-support-for-consistency-policy-and-PPL.patch |
|
Patch26: detail-show-consistency-policy.patch |
|
Patch27: imsmppl-support.patch |
|
Patch28: super1ppl-support.patch |
|
Patch29: add-ppl-and-no-ppl-options-for-update.patch |
|
Patch30: support-consistency-policy1-change.patch |
|
Patch31: mdadm.h-struct-mdinfo-reorganize-ppl-elements-for-be.patch |
|
Patch32: super1-replace-hard-coded-values-with-bit-definition.patch |
|
Patch33: mdadm-Clean-up-some-ugly-multiple-actions-on-single-.patch |
|
Patch34: mdadm-Fixup-a-number-of-whitespace-inconsistency-cas.patch |
|
Patch35: util-Cosmetic-changes.patch |
|
Patch36: Grow-Fixup-a-pile-of-cosmetic-issues.patch |
|
Patch37: util-Introduce2-md_get_array_info.patch |
|
Patch38: Incremental-Remove-redundant-call-for-GET_ARRAY_INFO.patch |
|
Patch39: util-Introduce3-md_get_disk_info.patch |
|
Patch40: util-Introduce4-md_set_array_info.patch |
|
Patch41: md_u-Remove-some-unused-ioctl-declarations.patch |
|
Patch42: Grow-Remove-unnecessary-optimization.patch |
|
Patch43: Grow-Do-not-shadow-an-existing-variable.patch |
|
Patch44: mdadm-grow-reshape-would1-be-stuck-from-raid1-to-raid.patch |
|
Patch45: imsm-use-rounded-size-for-metadata-initialization.patch |
|
Patch46: mdadm.c-fix-compile-error-switch-condition-has-boole.patch |
|
Patch47: sysfs-Use-the-presence-of-sys-block-dev-md-as-indica.patch |
|
Patch48: sysfs-Make-sysfs_init-return-an-error-code.patch |
|
Patch49: mdadm-Create-declaring1-an-existing-struct-within-sam.patch |
|
Patch50: Create-Fixup-bad-placement-of-logical-in-multi-line-.patch |
|
Patch51: Create-Fixup-various-whitespace-issues1.patch |
|
Patch52: util-must_be-container1-Use-sysfs_read-GET_VERSION-to.patch |
|
Patch53: util-set_array_info-Simplify-code-since-md_get-versi.patch |
|
Patch54: Assemble-Assemble-Stop-checking-kernel-md-driver-ver.patch |
|
Patch55: Build2-Stop-bothering-about-supporting-md-driver-olde.patch |
|
Patch56: Grow-Stop-bothering-about-md-driver-versions-older-t.patch |
|
Patch57: Detail-Stop-bothering1-about-md-drivers-older-than-0..patch |
|
Patch58: Create-Remove-all-attemps-to-handle-md-driver-older-.patch |
|
Patch59: Manage-Remove-all-references1-to-md_get_version.patch |
|
Patch60: Query-Remove-all-references-to-md_get_version.patch |
|
Patch61: bitmap-Remove-use-of-md-get-version1.patch |
|
Patch62: mdmon-Stop-bothering-about-md-get-version2.patch |
|
Patch63: mdopen-open_mddev-Use-md_get_array_info-to-determine1.patch |
|
Patch64: mdassemble-Use-md_get_array_info-to-check-for-valid-.patch |
|
Patch65: Assemble-Assemble-Get-rid-of-last-use-of-md_get-vers.patch |
|
Patch66: util-Finally-kill-off-md_get_version.patch |
|
Patch67: mdadm-Fail-for-kernels-older-than-2.6.15.patch |
|
Patch68: mdadm.c-fix-compile-warning-mdfd-is-uninitialized.patch |
|
Patch69: Revert-mdadm-grow-reshape-would-be-stuck-from-raid1-.patch |
|
Patch70: Retire-mdassemble.patch |
|
Patch71: super1-Clean-up-various-style-abuses.patch |
|
Patch72: mdopen-use-parameters-new_array-to-create-arrays-whe.patch |
|
Patch73: mdadm-manpage-update-manpage-for-readonly-parameter.patch |
|
Patch74: mdadm-manpage-clustered3-arrays-don-t-support-array-s.patch |
|
Patch75: Assemble-Clean1-up-start_array.patch |
|
Patch76: Detail-Remove-pre-2.6-code-for-printing-info-on-rebu.patch |
|
Patch77: Assemble-Remove-obsolete-test-for-kernels1-older-than.patch |
|
Patch78: Detail-Fixup-ugly-if-foo-abuse.patch |
|
Patch79: Query-Handle-error-returned-by-fstat.patch |
|
Patch80: Query-Use-sysfs-to-obtain-data-if-possible.patch |
|
Patch81: sysfs-Parse-array_state-in-sysfs_read.patch |
|
Patch82: util-Introduce6-md_array_active-helper.patch |
|
Patch83: maps-Terminate-modes-map-correctly.patch |
|
Patch84: maps-Use-keyvalue-for-null-terminator-to-indicate-un.patch |
|
Patch85: util-Get-rid-of-unused-enoughfd.patch |
|
Patch86: mdadm-retire-mdassemble-in-make-everything.patch |
|
Patch87: Grow_continue_command-ensure-content-is-properly-ini.patch |
|
Patch88: systemd-mdadm-last-resort-use-ConditionPathExists-in.patch |
|
Patch89: Detail-ensure-export-names-are-acceptable-as-shell-v.patch |
|
Patch90: Query-Quiet-gcc-since-it-cannot-know-errno-0-in-this.patch |
|
Patch91: Makefile-Default-to-O2-optimization1.patch |
|
Patch92: maps-Remove-incorrect-comment-about-strcmp.patch |
|
Patch93: maps-Simplify-implementation-of-map_name.patch |
|
Patch94: Don-t-use-UnSet-with-consistency_policy.patch |
|
Patch95: Detail-determine2-array-state-from-sysfs.patch |
|
Patch96: Detail-Respect-code-lines-are-80-character-wide.patch |
|
Patch97: Detail-Reinstate-support-for-not-having-sysfs.patch |
|
Patch98: Incremental-Use-md_array_active-where-applicable.patch |
|
Patch99: Incremental-Cleanup-some-if-statement-spaghetti.patch |
|
Patch100: Create-tell-udev-md-device-is-not-ready-when-first-c.patch |
|
Patch101: Incremental-Use-md_array_active-to-determine3-state-o.patch |
|
Patch102: Manage-Manage-ro-Use-md_array_active.patch |
|
Patch103: IMSM-Initialize-my_vol_raid_dev_num-during-vol-creat.patch |
|
Patch104: Grow-Grow_continue_command-Avoid-aliasing-array-vari.patch |
|
Patch105: change-back-0644-permission-for-Grow.c.patch |
|
Patch106: util-md_array_valid-Introduce5-md_array_valid-helper.patch |
|
Patch107: kernel-patch-Remove-obsolete-kernel-patches-against-.patch |
|
Patch108: mdassemble-Kill-off-the-last-remains.patch |
|
Patch109: mdadm-util-unify-fstat-checking-blkdev1-into-function.patch |
|
Patch110: mdadm-util-unify-stat-checking-blkdev-into-function.patch |
|
Patch111: Fix-typo2-in-new-udev-rule.patch |
|
Patch112: Incremental-returnis-not-a-function.patch |
|
Patch113: sysfs-sysfs_read-Count-activedisks-and-failed_disks.patch |
|
Patch114: container_members_max-degradation-Switch-to-using-sy.patch |
|
Patch115: IncrementalScan-Use-md_array_active-instead-of-mdge.patch |
|
Patch116: Mention-endian-in-documentation-for-update-byte-orde.patch |
|
Patch117: Monitor-Use-md_array_active-instead-of-manually-fidd.patch |
|
Patch118: Monitor-Code-is-80-characters-per-line.patch |
|
Patch119: mdadm-md.4-set-page-length-as-1000-to-avoid-warnings.patch |
|
Patch120: allow-drives-in-a-container-regardless-of-sector-size.patch |
|
Patch121: allocate-buffer-to-support-maximum-sector-size.patch |
|
Patch122: dont-allow-disks-with-different-sector-sizein-one.patch |
|
Patch123: Allow-more-spare-selection-criteria.patch |
|
Patch124: Add-sector-size-as-spare-selection-criterion.patch |
|
Patch125: Monitor-check_array-Centralize-exit-path.patch |
|
Patch126: Monitor-check_array-reduce-duplicated-error-handling.patch |
|
Patch127: Monitor-check_array-declate-mdinfo-instance-globally.patch |
|
Patch128: Monitor-check_array-Read-sysfs-entry-earlier.patch |
|
Patch129: Monitor-check_array-Obtain-RAID-level-fromsyfs.patch |
|
Patch130: Monitor-check_array-Get-faileddisks-from-sysfs.patch |
|
Patch131: Monitor-check_array-Get-arraydisks-from-sysfs.patch |
|
Patch132: Monitor-check_array-Get-nrdisks-active_disks-and-sp.patch |
|
Patch133: sysfs-sysfs_read-Count-workingdisks.patch |
|
Patch134: Monitor-checkarray-Use-working_disks-from-sysfs.patch |
|
Patch135: Correct-examine-output-for-4kdisks.patch |
|
Patch136: retire-the-APIs-that-driver-nolonger-supports.patch |
|
Patch137: Monitor-Not-much-point-declaring-mdlist-in-both-fork.patch |
|
Patch138: Monitor-mailfrom-is-initialized-correctly.patch |
|
Patch139: Monitor-Fixup-apile-of-whitespace-issues.patch |
|
Patch140: mdadm-Uninitialized-variable-rdev.patch |
|
Patch141: super-ddf-sysfs_read-takes-a-pointer-as-devicename-.patch |
|
Patch142: mdadm-Fixup-a-large-number-of-bad-formatting-of-logi.patch |
|
Patch143: mdadm-Fixup-morebroken-logical-operator-formatting.patch |
|
Patch144: mdadm-Fix-broken-formatting1.patch |
|
Patch145: mdadm-Fixup-broken-formatting2.patch |
|
Patch146: manpage-badblock-support-for-IMSM.patch |
|
Patch147: Detail-don-t-exit-if-ioctl-has-been-successful.patch |
|
Patch148: super1-fix-sb-max_dev-when-adding-a-new-disk-inline.patch |
|
Patch149: md_u-Remove-unused-ioctl-declaration-of-START_ARRAY.patch |
|
Patch150: Grow-set-component-size-prior-to-array-size.patch |
|
Patch151: Get-failed-disk-count-fromarray-state.patch |
|
Patch152: dont-allow-array-geometry-change-with-ppl-enabled.patch |
|
Patch153: dont-allow-to-enable-PPL-reshape-in-progress.patch |
|
Patch154: mdadm-test-Convert-code-formatto-use-Tab.patch |
|
Patch155: mdadm-test-Refactor-and-revamp-test-script.patch |
|
Patch156: mdadm-test-Add-raidtype-to-run-different-raidlevel-c.patch |
|
Patch157: mdadm-test-Add-disks-to-support-testing-phsical-devi.patch |
|
Patch158: Monitor-don-t-assume-mdadm-parameter-is-a-blockdevi.patch |
|
Patch159: super1-Always-round-data-offset-to-1M.patch |
|
Patch160: mdadm-r5cache-allow-adding-journal-to-array-without-.patch |
|
Patch161: Detail-correct-outputfor-active-arrays.patch |
|
Patch162: imsm-rebuild-from-2-disk-RAID10.patch |
|
Patch163: Error-messages-should-end-with-a-newline-character.patch |
|
Patch164: Use-correct-syntax-for-passing-DEVLINKS-to-mdadm-fro.patch |
|
Patch165: super1-only-set-clustered4-flag2-when-bitmap-is-presen.patch |
|
Patch166: Don-t-use-exit-ERANGE.patch |
|
Patch167: Monitor-containers-don-t-have-the-same-sysfs-propert.patch |
|
Patch168: Monitor-Include-containers-in-spare-migration2.patch |
|
Patch169: Detail-differentiate-between-container-and-inactive-.patch |
|
Patch170: mdadm-bitmap-examine-bitmap-failed1-when-bitmap-is-ex.patch |
|
Patch171: mdadm-install-twomore-udev-rules-in-mdadm.spec.patch |
|
Patch172: mdadm-set-journal_clean-after-scanning-all-disks.patch |
|
Patch173: lib-devid2kname-should-take-a-dev_t.patch |
|
Patch174: sysfs_init_dev-takea-dev_t-argument.patch |
|
Patch175: Manage-subdevs-Use-a-dev_t.patch |
|
Patch176: util-Code-is-80-characterswide.patch |
|
#The above patches are backported from RHEL7.5 upstream rebase |
|
Patch177: Don-t-abort-starting-the-array-if-kernel-does-not-su.patch |
|
Patch178: super1add-support-for-multiple-ppls.patch |
|
Patch179: imsmadd-support-for-multiple-ppls.patch |
|
Patch180: imsm-validate-multiple-ppls-during-assemble.patch |
|
Patch181: Zeroout-whole-ppl-space-during-creation-force-assemb.patch |
|
Patch182: imsm-switch-to-multiple-ppls-automatically-during-as.patch |
|
Patch183: Grow-fix-switching-on-PPL-during-recovery.patch |
|
Patch184: imsm-don-t-skip-resync-when-an-invalid-ppl-header-is.patch |
|
Patch185: imsm-Write-empty-PPL-header-if-assembling-regular-cl.patch |
|
Patch186: imsm-always-do-ppl-recovery-when-starting-a-rebuildi.patch |
|
Patch187: imsm-use-correct-map-when-validating-ppl.patch |
|
Patch188: imsm-write-initial-ppl-on-a-disk-added-for-rebuild.patch |
|
Patch189: mdmon-get-safe-mode-delay-file.patch |
|
Patch190: imsm-continue-resync-on-3disk-RAID10.patch |
|
Patch191: imsm-Set-disk-slot-number.patch |
|
Patch192: managemon-Dont-add-disk-to-the-array-after-it.patch |
|
Patch193: Avoid-to-take-spare-without-defined-domain-by-imsm.patch |
|
Patch194: stop-previous-reshape-process-first.patch |
|
|
|
# RHEL customization patches |
|
Patch195: mdadm-3.4-udev-race.patch |
|
Patch196: mdadm-3.3.2-skip-rules.patch |
|
Patch197: mdadm-3.3-udev.patch |
|
Patch198: mdadm-2.5.2-static.patch |
|
Patch199: disable-journal.patch |
|
URL: http://www.kernel.org/pub/linux/utils/raid/mdadm/ |
|
License: GPLv2+ |
|
Group: System Environment/Base |
|
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) |
|
Obsoletes: mdctl,raidtools |
|
Obsoletes: mdadm-sysvinit |
|
Conflicts: dracut < 024-25 |
|
Requires(post): systemd-units chkconfig coreutils |
|
BuildRequires: systemd-units binutils-devel |
|
Requires(preun): systemd-units |
|
Requires(postun): systemd-units coreutils |
|
Requires: libreport-filesystem |
|
|
|
%define _hardened_build 1 |
|
|
|
%description |
|
The mdadm program is used to create, manage, and monitor Linux MD (software |
|
RAID) devices. As such, it provides similar functionality to the raidtools |
|
package. However, mdadm is a single program, and it can perform |
|
almost all functions without a configuration file, though a configuration |
|
file can be used to help with some common tasks. |
|
|
|
%prep |
|
%setup -q |
|
|
|
%patch1 -p1 -b .ISO |
|
%patch2 -p1 -b .migration1 |
|
%patch3 -p1 -b .oddity |
|
%patch4 -p1 -b .typo1 |
|
%patch5 -p1 -b .clustered1 |
|
%patch6 -p1 -b .tidy |
|
%patch7 -p1 -b .symlinks |
|
%patch8 -p1 -b .clustered2 |
|
%patch9 -p1 -b .Wimplicit |
|
%patch10 -p1 -b .specify |
|
%patch11 -p1 -b .trivial |
|
%patch12 -p1 -b .twice |
|
%patch13 -p1 -b .invoked |
|
%patch14 -p1 -b .dereference |
|
%patch15 -p1 -b .Replace |
|
%patch16 -p1 -b .Forced |
|
%patch17 -p1 -b .ignore |
|
%patch18 -p1 -b .comments1 |
|
%patch19 -p1 -b .assembly |
|
%patch20 -p1 -b .Retry |
|
%patch21 -p1 -b .Build1 |
|
%patch22 -p1 -b .Introduce1 |
|
%patch23 -p1 -b .force |
|
%patch24 -p1 -b .existent |
|
%patch25 -p1 -b .generic |
|
%patch26 -p1 -b .detail |
|
%patch27 -p1 -b .imsmppl |
|
%patch28 -p1 -b .super1ppl |
|
%patch29 -p1 -b .options |
|
%patch30 -p1 -b .policy1 |
|
%patch31 -p1 -b .reorganize |
|
%patch32 -p1 -b .hard |
|
%patch33 -p1 -b .multiple |
|
%patch34 -p1 -b .inconsistency |
|
%patch35 -p1 -b .Cosmetic |
|
%patch36 -p1 -b .cosmetic |
|
%patch37 -p1 -b .Introduce2 |
|
%patch38 -p1 -b .redundant |
|
%patch39 -p1 -b .Introduce3 |
|
%patch40 -p1 -b .Introduce4 |
|
%patch41 -p1 -b .declarations |
|
%patch42 -p1 -b .unnecessary |
|
%patch43 -p1 -b .shadow |
|
%patch44 -p1 -b .would1 |
|
%patch45 -p1 -b .rounded |
|
%patch46 -p1 -b .switch |
|
%patch47 -p1 -b .presence |
|
%patch48 -p1 -b .Make |
|
%patch49 -p1 -b .declaring1 |
|
%patch50 -p1 -b .multi |
|
%patch51 -p1 -b .issues1 |
|
%patch52 -p1 -b .container1 |
|
%patch53 -p1 -b .versi |
|
%patch54 -p1 -b .ver |
|
%patch55 -p1 -b .Build2 |
|
%patch56 -p1 -b .versions |
|
%patch57 -p1 -b .bothering1 |
|
%patch58 -p1 -b .attemps |
|
%patch59 -p1 -b .references1 |
|
%patch60 -p1 -b .references |
|
%patch61 -p1 -b .version1 |
|
%patch62 -p1 -b .version2 |
|
%patch63 -p1 -b .determine1 |
|
%patch64 -p1 -b .valid |
|
%patch65 -p1 -b .vers |
|
%patch66 -p1 -b .Finally |
|
%patch67 -p1 -b .kernels |
|
%patch68 -p1 -b .uninitialized |
|
%patch69 -p1 -b .Revert |
|
%patch70 -p1 -b .Retire |
|
%patch71 -p1 -b .abuses |
|
%patch72 -p1 -b .parameters |
|
%patch73 -p1 -b .readonly |
|
%patch74 -p1 -b .clustered3 |
|
%patch75 -p1 -b .Clean1 |
|
%patch76 -p1 -b .pre |
|
%patch77 -p1 -b .kernels1 |
|
%patch78 -p1 -b .abuse |
|
%patch79 -p1 -b .Handle |
|
%patch80 -p1 -b .obtain |
|
%patch81 -p1 -b .Parse |
|
%patch82 -p1 -b .Introduce6 |
|
%patch83 -p1 -b .Terminate |
|
%patch84 -p1 -b .keyvalue |
|
%patch85 -p1 -b .enoughfd |
|
%patch86 -p1 -b .everything |
|
%patch87 -p1 -b .ini |
|
%patch88 -p1 -b .ConditionPathExists |
|
%patch89 -p1 -b .export |
|
%patch90 -p1 -b .Quiet |
|
%patch91 -p1 -b .optimization1 |
|
%patch92 -p1 -b .incorrect |
|
%patch93 -p1 -b .implementation |
|
%patch94 -p1 -b .UnSet |
|
%patch95 -p1 -b .determine2 |
|
%patch96 -p1 -b .Respect |
|
%patch97 -p1 -b .Reinstate |
|
%patch98 -p1 -b .applicable |
|
%patch99 -p1 -b .Cleanup |
|
%patch100 -p1 -b .first |
|
%patch101 -p1 -b .determine3 |
|
%patch102 -p1 -b .ro |
|
%patch103 -p1 -b .Initialize |
|
%patch104 -p1 -b .vari |
|
%patch105 -p1 -b .back |
|
%patch106 -p1 -b .Introduce5 |
|
%patch107 -p1 -b .against |
|
%patch108 -p1 -b .remains |
|
%patch109 -p1 -b .blkdev1 |
|
%patch110 -p1 -b .blkdev |
|
%patch111 -p1 -b .typo2 |
|
%patch112 -p1 -b .returnis |
|
%patch113 -p1 -b .activedisks |
|
%patch114 -p1 -b .degradation |
|
%patch115 -p1 -b .mdge |
|
%patch116 -p1 -b .orde |
|
%patch117 -p1 -b .fidd |
|
%patch118 -p1 -b .characters |
|
%patch119 -p1 -b .warnings |
|
%patch120 -p1 -b .regardless |
|
%patch121 -p1 -b .allocate |
|
%patch122 -p1 -b .sizein |
|
%patch123 -p1 -b .criteria |
|
%patch124 -p1 -b .criterion |
|
%patch125 -p1 -b .Centralize |
|
%patch126 -p1 -b .reduce |
|
%patch127 -p1 -b .declate |
|
%patch128 -p1 -b .earlier |
|
%patch129 -p1 -b .fromsyfs |
|
%patch130 -p1 -b .faileddisks |
|
%patch131 -p1 -b .arraydisks |
|
%patch132 -p1 -b .nrdisks |
|
%patch133 -p1 -b .workingdisks |
|
%patch134 -p1 -b .checkarray |
|
%patch135 -p1 -b .4kdisks |
|
%patch136 -p1 -b .nolonger |
|
%patch137 -p1 -b .fork |
|
%patch138 -p1 -b .mailfrom |
|
%patch139 -p1 -b .apile |
|
%patch140 -p1 -b .rdev |
|
%patch141 -p1 -b .devicename |
|
%patch142 -p1 -b .logi |
|
%patch143 -p1 -b .morebroken |
|
%patch144 -p1 -b .formatting1 |
|
%patch145 -p1 -b .formatting2 |
|
%patch146 -p1 -b .badblock |
|
%patch147 -p1 -b .successful |
|
%patch148 -p1 -b .inline |
|
%patch149 -p1 -b .declaration |
|
%patch150 -p1 -b .prior |
|
%patch151 -p1 -b .fromarray |
|
%patch152 -p1 -b .pplgeometry |
|
%patch153 -p1 -b .pplreshape |
|
%patch154 -p1 -b .formatto |
|
%patch155 -p1 -b .revamp |
|
%patch156 -p1 -b .raidlevel |
|
%patch157 -p1 -b .phsical |
|
%patch158 -p1 -b .blockdevi |
|
%patch159 -p1 -b .offset |
|
%patch160 -p1 -b .without |
|
%patch161 -p1 -b .outputfor |
|
%patch162 -p1 -b .rebuild |
|
%patch163 -p1 -b .newline |
|
%patch164 -p1 -b .fro |
|
%patch165 -p1 -b .flag2 |
|
%patch166 -p1 -b .ERANGE |
|
%patch167 -p1 -b .propert |
|
%patch168 -p1 -b .migration2 |
|
%patch169 -p1 -b .differentiate |
|
%patch170 -p1 -b .failed1 |
|
%patch171 -p1 -b .twomore |
|
%patch172 -p1 -b .scanning |
|
%patch173 -p1 -b .devid2kname |
|
%patch174 -p1 -b .takea |
|
%patch175 -p1 -b .subdevs |
|
%patch176 -p1 -b .characterswide |
|
%patch177 -p1 -b .abort |
|
%patch178 -p1 -b .super1add |
|
%patch179 -p1 -b .imsmadd |
|
%patch180 -p1 -b .validate |
|
%patch181 -p1 -b .Zeroout |
|
%patch182 -p1 -b .automatically |
|
%patch183 -p1 -b .switching |
|
%patch184 -p1 -b .invalid |
|
%patch185 -p1 -b .assembling |
|
%patch186 -p1 -b .rebuildi |
|
%patch187 -p1 -b .validating |
|
%patch188 -p1 -b .initial |
|
%patch189 -p1 -b .safe |
|
%patch190 -p1 -b .3disk |
|
%patch191 -p1 -b .slot |
|
%patch192 -p1 -b .Dont |
|
%patch193 -p1 -b .defined |
|
%patch194 -p1 -b .previous |
|
|
|
# RHEL customization patches |
|
%patch195 -p1 -b .race |
|
%patch196 -p1 -b .rules |
|
%patch197 -p1 -b .udev |
|
%patch198 -p1 -b .static |
|
%patch199 -p1 -b .disable |
|
|
|
%build |
|
make %{?_smp_mflags} CXFLAGS="$RPM_OPT_FLAGS" LDFLAGS="$RPM_LD_FLAGS" SYSCONFDIR="%{_sysconfdir}" mdadm mdmon |
|
|
|
%install |
|
rm -rf %{buildroot} |
|
make DESTDIR=%{buildroot} MANDIR=%{_mandir} BINDIR=%{_sbindir} SYSTEMD_DIR=%{_unitdir} install install-systemd |
|
install -Dp -m 755 %{SOURCE2} %{buildroot}%{_sbindir}/raid-check |
|
install -Dp -m 644 %{SOURCE3} %{buildroot}%{_udevrulesdir}/65-md-incremental.rules |
|
install -Dp -m 644 %{SOURCE4} %{buildroot}%{_sysconfdir}/sysconfig/raid-check |
|
install -Dp -m 644 %{SOURCE5} %{buildroot}%{_sysconfdir}/cron.d/raid-check |
|
mkdir -p -m 700 %{buildroot}/var/run/mdadm |
|
|
|
# systemd |
|
mkdir -p %{buildroot}%{_unitdir} |
|
install -m644 %{SOURCE6} %{buildroot}%{_unitdir} |
|
|
|
# tmpfile |
|
mkdir -p %{buildroot}%{_tmpfilesdir} |
|
install -m 0644 %{SOURCE7} %{buildroot}%{_tmpfilesdir}/%{name}.conf |
|
mkdir -p %{buildroot}%{_localstatedir}/run/ |
|
install -d -m 0710 %{buildroot}%{_localstatedir}/run/%{name}/ |
|
|
|
# abrt |
|
mkdir -p %{buildroot}/etc/libreport/events.d |
|
install -m644 %{SOURCE8} %{buildroot}/etc/libreport/events.d |
|
|
|
%clean |
|
rm -rf %{buildroot} |
|
|
|
%post |
|
%systemd_post mdmonitor.service |
|
/usr/bin/systemctl disable mdmonitor-takeover.service >/dev/null 2>&1 || : |
|
|
|
%preun |
|
%systemd_preun mdmonitor.service |
|
|
|
%postun |
|
%systemd_postun_with_restart mdmonitor.service |
|
|
|
%triggerun -- %{name} < 3.2.2-3 |
|
%{_bindir}/systemd-sysv-convert --save mdmonitor >/dev/null 2>&1 || : |
|
/bin/systemctl --no-reload enable mdmonitor.service >/dev/null 2>&1 || : |
|
/sbin/chkconfig --del mdmonitor >/dev/null 2>&1 || : |
|
/bin/systemctl try-restart mdmonitor.service >/dev/null 2>&1 || : |
|
|
|
%files |
|
%defattr(-,root,root,-) |
|
%doc TODO ChangeLog mdadm.conf-example COPYING misc/* |
|
%{_udevrulesdir}/* |
|
%{_sbindir}/* |
|
%{_unitdir}/* |
|
%{_mandir}/man*/md* |
|
/usr/lib/systemd/system-shutdown/* |
|
%config(noreplace) %{_sysconfdir}/cron.d/* |
|
%config(noreplace) %{_sysconfdir}/sysconfig/* |
|
%dir %{_localstatedir}/run/%{name}/ |
|
%config(noreplace) %{_tmpfilesdir}/%{name}.conf |
|
/etc/libreport/events.d/* |
|
|
|
%changelog |
|
* Wed Feb 07 2018 Xiao Ni <xni@redhat.com> - 4.0-13 |
|
- stop previous reshape process first |
|
- Resolves rhbz#1507415 |
|
|
|
* Wed Jan 31 2018 Xiao Ni <xni@redhat.com> - 4.0-12 |
|
- Don't take spare without defined domain by imsm |
|
- Resolves rhbz#1535436 |
|
|
|
* Fri Jan 12 2018 Xiao Ni <xni@redhat.com> - 4.0-11 |
|
- Fix some IMSM bugs |
|
- Resolves rhbz#1507439 rhbz#1516800 rhbz#1528267 |
|
|
|
* Mon Dec 11 2017 Xiao Ni <xni@redhat.com> - 4.0-10 |
|
- Disable raid5 journal function |
|
- Resolves rhbz#1518477 |
|
|
|
* Fri Nov 03 2017 Xiao Ni <xni@redhat.com> - 4.0-9 |
|
- Enable raid5 journal function |
|
- Resolves rhbz1505611 |
|
|
|
* Fri Nov 03 2017 Xiao Ni <xni@redhat.com> - 4.0-8 |
|
- Support for multiple-ppl in mdadm |
|
- Resolves rhbz#1500638 |
|
|
|
* Fri Nov 03 2017 Xiao Ni <xni@redhat.com> - 4.0-7 |
|
- Support adding flags for mdmonitor.service |
|
- Resolves rhbz#1320018 |
|
|
|
* Mon Sep 18 2017 Xiao Ni <xni@redhat.com> - 4.0-6 |
|
- Update to the latest upstream |
|
- Resolves rhbz#1455936 |
|
|
|
* Mon Jun 12 2017 Nigel Croxon <ncroxon@redhat.com> - 4.0-5 |
|
- RAID array grow not blocked when PPL is enabled |
|
- Resolves rhbz#1460141 |
|
|
|
* Wed May 31 2017 Xiao Ni <xni@redhat.com> - 4.0-4 |
|
- Imsm should not allow combing 512 and 4096 sector size disks in |
|
one volume and Wrong array size shown for array built on 4096 |
|
sector size disks |
|
- Resolves rhbz#1454390 and rhbz#1454379 |
|
|
|
* Wed May 17 2017 Xiao Ni <xni@redhat.com> - 4.0-3 |
|
- Support for Partial Parity Log |
|
- Resolves rhbz#1450057 |
|
|
|
* Thu Apr 13 2017 Nigel Croxon <ncroxon@redhat.com> - 4.0-2 |
|
- Rebuilt for submission |
|
- Resolves rhbz#1385946 |
|
|
|
* Sun Feb 26 2017 Xiao Ni <xni@redhat.com> - 4.0-1 |
|
- Update to upstream 4.0 |
|
- Resolves rhbz#1380017 |
|
|
|
* Wed Nov 16 2016 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.4-15 |
|
- Resolve case where a reshape could hang if started right after the |
|
completion of a resync. |
|
- Resolves rhbz#1386700 |
|
|
|
* Tue Sep 27 2016 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.4-14 |
|
- The fix for 1331709 caused a problem with container arrays (IMSM) as |
|
these can show up with a valid size of 0. Work around this to only |
|
exit for non container arrays. |
|
- Resolves rhbz#1379194 |
|
|
|
* Wed Sep 14 2016 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.4-13 |
|
- Make udev-md-array-arrays.rules more resilient to races if arrays are |
|
assembled and stopped and reassembled quick after each other. |
|
- Resolves rhbz#1331709 |
|
|
|
* Thu Aug 25 2016 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.4-12 |
|
- Apply additional required patch to fix buffer overrun using long device |
|
names |
|
- Resolves rhbz#1369891 |
|
|
|
* Wed Aug 24 2016 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.4-11 |
|
- Fix problem when creating more than 127 md arrays leading to overruns |
|
- Resolves rhbz#1369891 |
|
|
|
* Thu Aug 11 2016 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.4-10 |
|
- Fix fix to enable security through obscurity |
|
- Resolves rhbz#1225025 |
|
|
|
* Tue Aug 9 2016 Xiao Ni <xni@redhat.com> - 3.4-9 |
|
- Fix problem about reshape stuck at beginning |
|
- Resolves rhbz#1172937 |
|
|
|
* Fri Aug 5 2016 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.4-8 |
|
- Disable support for creating and reshaping into arrays with journals. |
|
- Resolves rhbz#1360464 |
|
|
|
* Mon Jun 20 2016 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.4-7 |
|
- Fix problem with mdadm large device names overflowing an internal buffer |
|
- Resolves rhbz#1347749 |
|
|
|
* Mon Jun 20 2016 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.4-6 |
|
- Fix problem with reshaping IMSM arrays, where a new reshape could be |
|
launched before the first reshape had fully completed, leading to |
|
unpected results. |
|
- Resolves rhbz#1347762 |
|
|
|
* Thu Jun 9 2016 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.4-5 |
|
- Enable security through obscurity |
|
- Resolves rhbz#1225025 |
|
|
|
* Thu Jun 9 2016 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.4-4 |
|
- Fix problem with raid0 arrays not being detected by Anaconda due to it |
|
setting MALLOC_PERTURB_ |
|
- Resolves rhbz#1324637 |
|
|
|
* Thu Apr 28 2016 Xiao Ni <xni@redhat.com> - 3.4-3 |
|
- Fix Degraded Raid1 array becomes inactive after rebooting |
|
- Resolves rhbz#1290494 |
|
|
|
* Tue Mar 1 2016 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.4-2 |
|
- Fix problem where it was not possible to stop an IMSM array during reshape |
|
- Resolves rhbz#1312837 |
|
|
|
* Tue Feb 9 2016 Xiao Ni <xni@redhat.com> - 3.4-1 |
|
- Update to mdadm-3.4 |
|
- Resolves rhbz#1273351 |
|
|
|
* Thu Sep 17 2015 Xiao Ni <xni@redhat.com> - 3.3.2-6 |
|
- Fix issue reshape is stuck |
|
- Resolves rhbz#1246035 |
|
|
|
* Tue Aug 25 2015 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.3.2-5 |
|
- Add support for IMSM over NVME storage |
|
- Resolves rhbz#1173504 |
|
|
|
* Thu Jul 2 2015 Xiao Ni <xni@redhat.com> - 3.3.2-4 |
|
- Fix issue mdadm --grow --size does not work for >2TB |
|
- Resolves rhbz#1236538 |
|
|
|
* Tue Mar 24 2015 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.3.2-3 |
|
- Fix issue where migration record was not always cleared after successful |
|
reshape. |
|
- Resolves rhbz#1183724 |
|
|
|
* Mon Jan 19 2015 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.3.2-2 |
|
- Do not install 64-md-raid-assembly.rules |
|
- Resolves rhbz#1181620 |
|
|
|
* Wed Aug 27 2014 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.3.2-1 |
|
- Update to upstream mdadm-3.3.2 |
|
- Resolves rhbz#1085533 |
|
|
|
* Fri Jul 25 2014 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-33 |
|
- Fix problem with spare disk not being added correctly to IMSM array |
|
because mdmon is unable to write metadata to it. |
|
- Resolves bz1072979 |
|
|
|
* Thu Jul 24 2014 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-32 |
|
- Fix issue with mdmon not being launched correctly after reboot |
|
during container reshape second of a second RAID5 array, resulting in |
|
it being read-only and cannot be mounted. |
|
- Resolves bz1074970 |
|
|
|
* Mon Mar 10 2014 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-31 |
|
- Fix problem of IMSM platform capabilities not being detected in UEFI |
|
mode when only the second SATA controller is enabled. |
|
- Resolves bz1074161 |
|
|
|
* Mon Mar 3 2014 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-30 |
|
- Fix problem where Resync and recovery of RAID10 stopped at more than |
|
50% does not continue after reassemblation |
|
- Resolves bz1068154 |
|
|
|
* Wed Jan 29 2014 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-29 |
|
- Fix problem with mdadm crashing, if trying to create an IMSM array, with |
|
missing devices. |
|
- Resolves bz1056466 |
|
|
|
* Wed Jan 29 2014 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-28 |
|
- Fix problem with policy with path=* not working if there is no |
|
/dev/disk/by-path/ directory, as is the case with (S)ATA only systems |
|
- Resovles bz1045510 |
|
|
|
* Wed Jan 29 2014 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-27 |
|
- Fix problem with failed disk staying available in IMSM volume/container |
|
- Resolves bz1052904 |
|
|
|
* Wed Jan 29 2014 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-26 |
|
- Fix problem with reshape not proceeding after reboot on RAID 0 and RAID 5 |
|
- Resolves bz1046064 |
|
|
|
* Fri Jan 24 2014 Daniel Mach <dmach@redhat.com> - 3.2.6-25 |
|
- Mass rebuild 2014-01-24 |
|
|
|
* Fri Dec 27 2013 Daniel Mach <dmach@redhat.com> - 3.2.6-24 |
|
- Mass rebuild 2013-12-27 |
|
|
|
* Thu Nov 21 2013 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-23 |
|
- Fix problem with rebuild not restarting on stopped RAID1/10 IMSM arrays |
|
- Resolves bz1032911 |
|
|
|
* Thu Oct 10 2013 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-22 |
|
- Check for DM_UDEV_DISABLE_OTHER_RULES_FLAG instead of |
|
DM_UDEV_DISABLE_DISK_RULES_FLAG in 65-md-incremental.rules |
|
- Resolves bz1015515 |
|
|
|
* Thu Aug 29 2013 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-21 |
|
- Fix pointless rpmbuild noise over mismatching date info |
|
- Remove Fedora 17 support |
|
- Fix problem where first stop command doesn't stop container during |
|
IMSM volume's bz956059 |
|
|
|
* Wed Apr 24 2013 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-19 |
|
- Fix problem where rebuild of IMSM RAID5 volume started in OROM, |
|
does not proceed in OS |
|
- Resolves bz956021 (f18), bz956026 (f17), bz956031 (f19) |
|
|
|
* Tue Apr 23 2013 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-18 |
|
- Fix problem with IMSM metadata where resync progress would be lost |
|
if an array was stopped during ongoing expansion of a RAID1/5 volume. |
|
- Resolves bz948745 |
|
|
|
* Tue Apr 23 2013 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-17 |
|
- Reorder patches to allow for udev query patch to be applied on |
|
Fedora 17 as well. |
|
|
|
* Mon Apr 22 2013 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-16 |
|
- Rely on rpm macros to place files in correct directories, and match /usr |
|
move |
|
- Resolves bz955248 |
|
|
|
* Thu Mar 7 2013 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-15 |
|
- Cleanup .spec file handling of different Fedora versions |
|
- Resolves bz914629 |
|
|
|
* Tue Feb 5 2013 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-14 |
|
- Resync with final version of upstream patches for launching mdmon |
|
via systemctl. Require dracut 024-025 or later to match. |
|
- Resolves bz879327 |
|
|
|
* Fri Feb 1 2013 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-13 |
|
- Update to upstream solution for launching mdmon via systemctl |
|
- Resolves bz879327 |
|
|
|
* Mon Jan 21 2013 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-12 |
|
- Launch mdmon via systemctl to avoid it ending up in the wrong cgroup |
|
and getting killed in the boot process when switching from the |
|
initrd to the real root. |
|
- Resolves bz879327 |
|
|
|
* Tue Jan 8 2013 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-11 |
|
- Move code to leave udev cgroup into mdmon and excute it after we |
|
work, to make sure it actually does the right thing. |
|
|
|
* Mon Jan 7 2013 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-10 |
|
- Fix mdmonitor-takeover.service dangling symlink problem for real |
|
|
|
* Mon Jan 7 2013 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-9 |
|
- Reintroduce fix for removing dangling symlink of |
|
mdmonitor-takeover.service which got lost in the fix introduced in |
|
3.2.6-8 |
|
|
|
* Fri Jan 4 2013 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-8 |
|
- mdmonitor-takeover.service is obsolete with the --offroot support, |
|
and it is harmful as of 3.2.6 |
|
- Resolves bz834245 |
|
|
|
* Mon Dec 10 2012 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-7 |
|
- Fix issue with udev scripts where if an raid volume with one of |
|
the disks failing, the failed disk is still present in the volume |
|
and container. The raid volume stays is in normal state (should be |
|
degraded) and the rebuild cannot start. |
|
- Resolves bz886123 |
|
|
|
* Mon Dec 10 2012 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-5 |
|
- mdadm-sysvinit is obsolete given that we no longer support booting |
|
using sysvinit scripts |
|
- Resolves bz884993 |
|
|
|
* Mon Dec 10 2012 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-4 |
|
- Fix typo in error message in fix for 880972. No functional changes |
|
|
|
* Fri Nov 30 2012 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-3 |
|
- Disallow creating a second IMSM RAID array size 0 (bz880972) |
|
- Disallow creating IMSM RAIDs that spans multiple controllers (bz880974) |
|
- Resolves bz880972, bz880974 |
|
|
|
* Thu Nov 15 2012 Doug Ledford <dledford@redhat.com> - 3.2.6-2 |
|
- Modify mdadm to set the cgroup of mdmon to systemd if it's available |
|
- Related bz873576 (and others) |
|
|
|
* Thu Oct 25 2012 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-1 |
|
- Upgrade to mdadm-3.2.6 |
|
- Resolves bz869930 |
|
|
|
* Fri Oct 19 2012 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.5-14 |
|
- Dummy update to work around bodhi breakage. No actual code changes. |
|
|
|
* Fri Oct 19 2012 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.5-13 |
|
- Relax installation requirements for abrt script to only depend on |
|
libreport-filesystem rather than the full abrt package |
|
|
|
* Thu Oct 18 2012 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.5-12 |
|
- Add abrt script to retrieve /proc/mdstat output in case of crash |
|
- Resolves bz867842 |
|
|
|
* Wed Oct 17 2012 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.5-11 |
|
- Remove package requirements for udev and initscripts for F18+ |
|
- Resolves bz864562 |
|
|
|
* Wed Oct 3 2012 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.5-9 |
|
- Resolve issue with ambiguous licenses |
|
- Resolves bz862761 |
|
|
|
* Mon Sep 10 2012 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.5-8 |
|
- Switch to using new systemd macros for F18+ |
|
- Resolves bz850202 |
|
|
|
* Thu Aug 2 2012 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.5-7 |
|
- Remove bogus rogue patch applied in 3.2.5-5 with justification and |
|
without following the structure of the mdadm package. |
|
|
|
* Fri Jul 27 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 3.2.5-6 |
|
- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild |
|
|
|
* Wed Jul 18 2012 Karsten Hopp <karsten@redhat.com> 3.2.5-5 |
|
- include <linux/types.h> in some to avoid type clashes. |
|
same problem as rhbz #840902 |
|
|
|
* Mon Jul 16 2012 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.5-4 |
|
- Move /etc/tmpfiles.d/mdadm.conf to /lib/tmpfiles.d/ to comply with |
|
Fedora tmpfile rules |
|
- Resolves bz840187 |
|
|
|
* Mon Jun 25 2012 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.5-3 |
|
- Fix problem where reshape of RAID volume is broken after trying to |
|
stop all MD devices. |
|
- Enhance raid-check to allow the adming to specify the max number of |
|
concurrent arrays to be checked at any given time. |
|
- Resolves bz830177, bz820124 |
|
|
|
* Wed Jun 13 2012 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.5-2 |
|
- Fix uninstall script to remove dangling symlink to |
|
mdmonitor-takeover.service, if the mdadm package is uninstalled from |
|
the system. |
|
- Resolves bz828354 |
|
|
|
* Mon May 21 2012 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.5-1 |
|
- Upgrade to mdadm-3.2.5 |
|
- Resolves bz822850 |
|
|
|
* Tue May 15 2012 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.4-3 |
|
- Fix mdadm-3.2.4 introduced bug where --add fails in common cases |
|
- Resolves bz821717 (f17) bz821718 (f16) bz821719 (f15) |
|
|
|
* Thu May 10 2012 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.4-2 |
|
- Fix mdadm.conf to use 'd' for /var/run/mdadm creation, to avoid the |
|
map file getting deleted during boot. |
|
|
|
* Thu May 10 2012 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.4-1 |
|
- Upgrade to mdadm-3.2.4 |
|
- Resolves bz820534 (rawhide) bz820527 (f17) bz820531 (f16) bz820532 (f15) |
|
|
|
* Mon Apr 30 2012 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.3-9 |
|
- Fix Monitor mode sometimes crashes when a resync completes |
|
- Fix missing symlink for mdadm container device when incremental creates |
|
the array |
|
- Make sure when creating a second array in a container that the second |
|
array uses all available space since leaving space for a third array |
|
is invalid |
|
- Validate the number of imsm volumes per controller |
|
- Fix issues with imsm arrays and disks larger than 2TB |
|
- Add support for expanding imsm arrays/containers |
|
- The support for expanding imsm arrays/containers was accepted upstream, |
|
update to the official patches from there |
|
- Fix for the issue of --add not being very smart |
|
- Fix an issue causing rebuilds to fail to restart on reboot (data |
|
corrupter level problem) |
|
- Reset the bad flag on map file updates |
|
- Correctly fix failure when trying to add internal bitmap to 1.0 arrays |
|
- Resolves: bz817023 (f17) bz817024 (f17) bz817026 (f17) bz817028 (f17) |
|
- Resolves: bz817029 (f17) bz817032 (f17) bz817038 (f17) bz808774 (f17) |
|
- Resolves: bz817039 (f17) bz817042 (f17) |
|
|
|
* Mon Apr 30 2012 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.3-8 |
|
- Fix bug where IMSM arrays stay inactive in case a reboot is |
|
- performed during the reshape process. |
|
- Resolves: bz817522 (f17) bz817535 (f16) bz817537 (f15) |
|
|
|
* Wed Mar 28 2012 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.3-7 |
|
- Fix issue when re-adding drive to a raid1 array with bitmap |
|
- Resolves: bz807743 (f17) bz769323 (f16) bz791159 (f15) |
|
|
|
* Thu Feb 23 2012 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.3-6 |
|
- Fix double free on buggy old kernel sysfs read |
|
- Fix segfault if trying to write superblock to non existing device |
|
- Resolves: bz795707 (f17) bz795747 (f16) bz795748 (f15) |
|
- Resolves: bz795461 (f17) bz795749 (f16) bz795750 (f15) |
|
|
|
* Thu Feb 16 2012 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.3-5 |
|
- Fix issue with devices failing to be added to a raid using bitmaps, |
|
due to trying to write the bitmap with mis-aligned buffers using |
|
O_DIRECT |
|
- Resolves: bz789898 (f16) bz791189 (f15) |
|
|
|
* Mon Jan 30 2012 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.3-4 |
|
- Add support for --offroot to mdadm/mdmon |
|
- Resolves: bz785739 (rawhide) bz785737 (f16) bz771405 (f15) |
|
|
|
* Thu Jan 12 2012 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.3-3 |
|
- Fix case where we have to retry in case a remove fails due to an array |
|
being busy |
|
- Resolves: bz773337 (rawhide) bz773340 (f16) bz773341 (f15) |
|
|
|
* Thu Jan 5 2012 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.3-2 |
|
- Workaround for gcc-4.7 strict aliasing breaking the build |
|
|
|
* Wed Jan 4 2012 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.3-1 |
|
- Update to upstream 3.2.3 |
|
- Resolves: bz770110 (rawhide) bz771413 (f16) bz759014 (rawhide) |
|
- Resolves: bz759015 (f16) bz759035 (rawhide) bz759036 (f16) |
|
- Resolves: bz771608 (f15) bz759016 (f15) bz759039 (f15) |
|
|
|
* Mon Nov 21 2011 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.2-15 |
|
- Backport upstream fix for memory leak that can prevent migration to |
|
RAID5 from completing. |
|
- Backport upstream fix preventing mounting a device while it is in |
|
process of reshaping |
|
- Resolves: bz755005 bz755009 |
|
|
|
* Wed Nov 9 2011 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.2-14 |
|
- Backport upstream fixes to prevent growing v0.90 metadata raid out |
|
of supported size. |
|
- Add missing 'disable' argument to systemctl in preun script |
|
- Resolves: bz735306 (Fedora 15) bz748731 (Fedora 16) bz748732 (rawhide), |
|
Resolves: bz751716 |
|
|
|
* Wed Oct 26 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 3.2.2-13 |
|
- Rebuilt for glibc bug#747377 |
|
|
|
* Sat Oct 22 2011 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.2-12 |
|
- Backport upstream version of fix for IMSM RAID assembly problem, |
|
which resolves issues when booting off sysvinit based system. |
|
- Resolves: bz736387 (Fedora 15) bz744217 (Fedora 16) |
|
|
|
* Wed Oct 19 2011 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.2-11 |
|
- Fix systemd dependency problem |
|
- Resolves: bz741115 (F16) bz744226 (rawhide) |
|
|
|
* Wed Oct 19 2011 Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.2-10 |
|
- Fix problem where a dirty IMSM RAID isn't assembled correctly during |
|
boot, preventing booting from this RAID device. |
|
- Resolves: bz736387 (Fedora 15) bz744217 (Fedora 16) |
|
- Fix race between udev and mdadm when assembling md device using |
|
mdadm -I, where udev would spawn an additional mdadm command to |
|
perform the assembly in parallel. |
|
|
|
* Wed Aug 31 2011 Doug Ledford <dledford@redhat.com> - 3.2.2-9 |
|
- Fix boot with older imsm arrays that have an unused attribute set |
|
- Resolves: bz729205 |
|
|
|
* Thu Aug 25 2011 Doug Ledford <dledford@redhat.com> - 3.2.2-8 |
|
- Rework the 65-md-incremental.rules file to add the following support: |
|
Nested md raid arrays should now work |
|
MD on top of LUKS or other lvm based devices should now work |
|
We should no longer grab multipath paths before multipath can |
|
|
|
* Wed Jul 27 2011 Doug Ledford <dledford@redhat.com> - 3.2.2-7 |
|
- Fix a bug with readding a device |
|
- Fix a bug with writemostly flag handling |
|
|
|
* Mon Jul 18 2011 Doug Ledford <dledford@redhat.com> - 3.2.2-6 |
|
- Bump and rebuild again |
|
|
|
* Fri Jul 15 2011 Doug Ledford <dledford@redhat.com> - 3.2.2-5 |
|
- Bump and rebuild to keep version ahead of f15 version |
|
|
|
* Thu Jul 14 2011 Doug Ledford <dledford@redhat.com> - 3.2.2-4 |
|
- Fix minor issue in man page |
|
- Resolves: bz717795 |
|
|
|
* Thu Jul 07 2011 Milan Broz <mbroz@redhat.com> - 3.2.2-3 |
|
- Use unit files with systemd. (johannbg) |
|
- Add sub-package sysvinit for SysV init script. |
|
- Resolves: bz713573 |
|
|
|
* Wed Jul 06 2011 Milan Broz <mbroz@redhat.com> - 3.2.2-2 |
|
- Fix build on PPC. |
|
- Resolves: bz719380 |
|
|
|
* Tue Jun 28 2011 Milan Broz <mbroz@redhat.com> - 3.2.2-1 |
|
- Update to latest upstream version |
|
- Resolves: bz714083 |
|
|
|
* Tue Jun 14 2011 Doug Ledford <dledford@redhat.com> - 3.2.1-5 |
|
- Fix for bz710646 |
|
|
|
* Thu Mar 31 2011 Doug Ledford <dledford@redhat.com> - 3.2.1-4 |
|
- Somehow the 64-md-raid.rules file went missing. Put it back. |
|
- Resolves: bz692248 |
|
|
|
* Thu Mar 31 2011 Doug Ledford <dledford@redhat.com> - 3.2.1-3 |
|
- Fix mdmonitor init script setup of SELinux on PIDPATH |
|
- Resolves: bz692559 |
|
|
|
* Mon Mar 28 2011 Doug Ledford <dledford@redhat.com> - 3.2.1-2 |
|
- Restore build command to sane command instead of test command |
|
|
|
* Mon Mar 28 2011 Doug Ledford <dledford@redhat.com> - 3.2.1-1 |
|
- Update to latest upstream version |
|
- Resolves: 691353 |
|
|
|
* Fri Mar 25 2011 Doug Ledford <dledford@redhat.com> - 3.1.5-1 |
|
- Update to latest upstream stable release |
|
- Update mdadm.rules file to honor noiswmd and nodmraid command line options |
|
- Ghost the directory in /var/run, create /var/run/mdadm in mdmonitor init |
|
script |
|
- Don't report mismatch counts on either raid1 or raid10 |
|
- Check both active and idle arrays during raid check runs |
|
- Move the raid-check script from cron.weekly to /usr/sbin, add a crontab |
|
file to /etc/cron.d and mark it config(noreplace). This way users can |
|
select their own raid-check frequency and have it honored through |
|
upgrades. |
|
- Allow the raid-check script to set the process and io priority of the |
|
thread performing the check in order to preserve responsiveness of the |
|
machine during the check. |
|
- Resolves: 633229, 656620. 679843, 671076, 659933 |
|
|
|
* Tue Feb 08 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 3.1.3-0.git20100804.2.1 |
|
- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild |
|
|
|
* Wed Aug 04 2010 Doug Ledford <dledford@redhat.com> - 3.1.3-0.git20100804.2 |
|
- Add udev patch to not have incremental assembly in two rules files |
|
|
|
* Wed Aug 04 2010 Doug Ledford <dledford@redhat.com> - 3.1.3-0.git20100804.1 |
|
- Update to latest upstream release (resolves an issue with stale lock |
|
files on the md device map file) |
|
|
|
* Thu Jul 22 2010 Doug Ledford <dledford@redhat.com> - 3.1.3-0.git20100722.2 |
|
- Remove the glibc-static buildreq and don't build the static mdadm since |
|
we don't install it anyway |
|
- Remove the udev file since adding it was supposed to be a rawhide only change |
|
|
|
* Thu Jul 22 2010 Doug Ledford <dledford@redhat.com> - 3.1.3-0.git20100722.1 |
|
- Change git date format to the correct format (YYYYMMDD) |
|
- Update to latest upstream push (fixes bz604023) |
|
|
|
* Tue Jul 20 2010 Doug Ledford <dledford@redhat.com> - 3.1.3-0.git07202010.2 |
|
- Fix racy locking of mapfile (bz616596) |
|
|
|
* Tue Jul 20 2010 Doug Ledford <dledford@redhat.com> - 3.1.3-0.git07202010.1 |
|
- Update to latest git repo (3.1.2 plus pending changes, fixes bz602457) |
|
- Add in 64-md-raid.rules to compensate for it no longer being in udev |
|
(bz581905) |
|
- Remove mdadm.static as its no longer used in initrd creation |
|
|
|
* Tue Apr 13 2010 Doug Ledford <dledford@redhat.com> - 3.1.2-10 |
|
- Minor update to mdadm.rules to make anaconda happy |
|
|
|
* Thu Apr 08 2010 Doug Ledford <dledford@redhat.com> - 3.1.2-9 |
|
- Slight fix on container patch |
|
|
|
* Thu Apr 08 2010 Doug Ledford <dledford@redhat.com> - 3.1.2-8 |
|
- Updated container patch that also enables mdadm -IRs for imsm devices |
|
|
|
* Tue Apr 06 2010 Doug Ledford <dledford@redhat.com> - 3.1.2-7 |
|
- Fix up directory in mdmonitor init script so that we restart mdmon like we |
|
are supposed to |
|
- Add a rule to run incremental assembly on containers in case there are |
|
multiple volumes in a container and we only started some of them in the |
|
initramfs |
|
- Make -If work with imsm arrays. We had too restrictive of a test in |
|
sysfs_unique_holder. |
|
- Make incremental assembly of containers act like incremental assembly of |
|
regular devices (aka, --run is needed to start a degraded array) |
|
|
|
* Tue Apr 06 2010 Doug Ledford <dledford@redhat.com> - 3.1.2-6 |
|
- Typo in new rules file |
|
|
|
* Tue Apr 06 2010 Doug Ledford <dledford@redhat.com> - 3.1.2-5 |
|
- Enable incremental support for imsm devices |
|
|
|
* Tue Apr 06 2010 Doug Ledford <dledford@redhat.com> - 3.1.2-4 |
|
- One line fix for ppc64 compiles |
|
|
|
* Tue Apr 06 2010 Doug Ledford <dledford@redhat.com> - 3.1.2-3 |
|
- Clean up directory mess once and for all |
|
- Add incremental remove support |
|
|
|
* Wed Mar 17 2010 Doug Ledford <dledford@redhat.com> - 3.1.2-2 |
|
- Add a little more paranoia checking to the RebuildMap code to avoid ever |
|
having the same infinite loop as in bz569019 again even if we change file |
|
locations to somewhere where we can't create a mapfile |
|
|
|
* Tue Mar 16 2010 Doug Ledford <dledford@redhat.com> - 3.1.2-1 |
|
- Grab latest upstream release instead of git repo snapshot (bz552344, bz572561) |
|
- The lack of /dev/md is causing problems, so add code to mapfile.c to cause |
|
us to create /dev/md if it doesn't exist (bz569019) |
|
|
|
* Tue Feb 23 2010 Doug Ledford <dledford@redhat.com> - 3.1.1-0.gcd9a8b5.6 |
|
- Newer version of imsm patch that leaves warning, but only when there |
|
actually are too many devices on the command line (bz554974) |
|
|
|
* Sun Feb 21 2010 Doug Ledford <dledford@redhat.com> - 3.1.1-0.gcd9a8b5.5 |
|
- The uuid patch cause a different problem during assembly, so use a gross |
|
hack to work around the uuid issue that won't break assembly until fixed |
|
properly upstream (bz567132) |
|
|
|
* Sun Feb 21 2010 Doug Ledford <dledford@redhat.com> - 3.1.1-0.gcd9a8b5.4 |
|
- Fix problem with booting multiple imsm containers when they aren't listed |
|
"just so" in the mdadm.conf file (bz554974) |
|
|
|
* Fri Feb 19 2010 Doug Ledford <dledford@redhat.com> - 3.1.1-0.gcd9a8b5.3 |
|
- Don't run the raid-check script if the kernel doesn't support |
|
md devices (bz557053) |
|
- Don't report any mismatch_cnt issues on raid1 devices as there are |
|
legitimate reasons why the count may not be 0 and we are getting enough |
|
false positives that it renders the check useless (bz554217, bz547128) |
|
|
|
* Thu Feb 18 2010 Doug Ledford <dledford@redhat.com> - 3.1.1-0.gcd9a8b5.2 |
|
- Fix s390/ppc64 UUID byte swap issue |
|
|
|
* Wed Feb 17 2010 Doug Ledford <dledford@redhat.com> - 3.1.1-0.gcd9a8b5.1 |
|
- Update to head of upstream git repo, which contains a significant number |
|
of bug fixes we need (bz543746) |
|
|
|
* Fri Jan 15 2010 Doug Ledford <dledford@redhat.com> - 3.0.3-3 |
|
- Fix crash when AUTO keyword is in mdadm.conf (bz552342) |
|
|
|
* Tue Dec 01 2009 Doug Ledford <dledford@redhat.com> - 3.0.3-2 |
|
- Minor tweak to init script for LSB compliance (bz527957) |
|
|
|
* Wed Nov 04 2009 Doug Ledford <dledford@redhat.com> - 3.0.3-1 |
|
- New upstream release 3.0.3 (bz523320, bz527281) |
|
- Update a couple internal patches |
|
- Drop a patch in that was in Neil's tree for 3.0.3 that we had pulled for |
|
immediate use to resolve a bug |
|
- Drop the endian patch because it no longer applied cleanly and all attempts |
|
to reproduce the original problem as reported in bz510605 failed, even up |
|
to and including downloading the specific package that was reported as |
|
failing in that bug and trying to reproduce with it on both ppc and ppc64 |
|
hardware and with both ppc and ppc64 versions on the 64bit hardware. |
|
Without a reproducer, it is impossible to determine if a rehashed patch |
|
to apply to this code would actually solve the problem, so remove the patch |
|
entirely since the original problem, as reported, was an easy to detect DOA |
|
issue where installing to a raid array was bound to fail on reboot and so |
|
we should be able to quickly and definitively tell if the problem resurfaces. |
|
- Update the mdmonitor init script for LSB compliance (bz527957) |
|
- Link from mdadm.static man page to mdadm man page (bz529314) |
|
- Fix a problem in the raid-check script (bz523000) |
|
- Fix the intel superblock handler so we can test on non-scsi block devices |
|
|
|
* Fri Oct 2 2009 Hans de Goede <hdegoede@redhat.com> - 3.0.2-1 |
|
- New upstream release 3.0.2 |
|
- Add a patch fixing mdadm --detail -export segfaults (bz526761, bz523862) |
|
- Add a patch making mdmon store its state under /dev/.mdadm for initrd |
|
mdmon, rootfs mdmon handover |
|
- Restart mdmon from initscript (when running) for rootfs mdmon handover |
|
|
|
* Thu Sep 17 2009 Doug Ledford <dledford@redhat.com> - 3.0-4 |
|
- Stop some mdmon segfaults (bz523860) |
|
|
|
* Tue Sep 15 2009 Doug Ledford <dledford@redhat.com> - 3.0-3 |
|
- Update to current head of upstream git repo for various imsm related fixes |
|
(fixes bz523262) |
|
- Fix display of metadata version in output of Detail mode |
|
- Add UUID output to --detail --export (bz523314) |
|
|
|
* Fri Jul 24 2009 Doug Ledford <dledford@redhat.com> - 3.0-2 |
|
- Improved raid-check script as well as the ability to configure what devices |
|
get checked |
|
- Endian patch for uuid generation |
|
|
|
* Mon Jun 29 2009 Doug Ledford <dledford@redhat.com> - 3.0-1 |
|
- Remove stale patches already accepted by upstream |
|
- Fix the raid-check script to only try and check a device if it is |
|
checkable |
|
- Update to official mdadm-3.0 version |
|
- Resolves: bz505587, bz505552 |
|
|
|
* Tue May 19 2009 Doug Ledford <dledford@redhat.com> - 3.0-0.devel3.7 |
|
- Move the mdadm.map file from /dev/md/ to /dev/ so the installer doesn't |
|
need to precreate the /dev/md/ directory in order for incremental |
|
assembly to work |
|
|
|
* Tue May 19 2009 Doug Ledford <dledford@redhat.com> - 3.0-0.devel3.6 |
|
- Only check raid devices automatically, do not attempt to repair them |
|
during the weekly data scrubbing |
|
|
|
* Fri Mar 20 2009 Doug Ledford <dledford@redhat.com> - 3.0-0.devel3.5 |
|
- Fix a few issues with the new code to determine when a device gets to |
|
keep its name and when it doesn't |
|
|
|
* Fri Mar 20 2009 Doug Ledford <dledford@redhat.com> - 3.0-0.devel3.4 |
|
- Change the perms on the udev rules file, it doesn't need to be +x |
|
|
|
* Fri Mar 20 2009 Doug Ledford <dledford@redhat.com> - 3.0-0.devel3.3 |
|
- Slightly tweak the udev rules to make sure we don't start arrays |
|
while running in rc.sysinit...leave array starting to it instead |
|
- Modify mdadm to put its mapfile in /dev/md instead of /var/run/mdadm |
|
since at startup /var/run/mdadm is read-only by default and this |
|
breaks incremental assembly |
|
- Change how mdadm decides to assemble incremental devices using their |
|
preferred name or a random name to avoid possible conflicts when plugging |
|
a foreign array into a host |
|
|
|
* Wed Mar 18 2009 Doug Ledford <dledford@redhat.com> - 3.0-0.devel3.2 |
|
- Change around the mdadm udev rules we ship to avoid a udev file conflict |
|
|
|
* Tue Mar 17 2009 Doug Ledford <dledford@redhat.com> - 3.0-0.devel3.1 |
|
- Update to latest devel release |
|
- Remove the no longer necessary udev patch |
|
- Remove the no longer necessary warn patch |
|
- Remove the no longer necessary alias patch |
|
- Update the mdadm.rules file to only pay attention to device adds, not |
|
changes and to enable incremental assembly |
|
- Add a cron job to run a weekly repair of the array to correct bad sectors |
|
- Resolves: bz474436, bz490972 |
|
|
|
* Wed Feb 25 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 3.0-0.devel2.2.1 |
|
- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild |
|
|
|
* Thu Feb 19 2009 Doug Ledford <dledford@redhat.com> - 3.0-0.devel2.2 |
|
- Readd our old mdadm rules file that does incremental assembly |
|
- Remove the new mdadm rules file from upstream as we already have this in |
|
our udev package (and the one in the udev package already has a bug fixed) |
|
|
|
* Thu Feb 12 2009 Doug Ledford <dledford@redhat.com> - 3.0-0.devel2.1 |
|
- Update to latest upstream devel release |
|
- Use the udev rules file included with mdadm instead of our own |
|
- Drop all the no longer relevant patches |
|
- Fix a build error in mdopen.c |
|
- Fix the udev rules path in Makefile |
|
- Fix a compile issue with the __le32_to_cpu() macro usage (bad juju to |
|
to operations on the target of the macro as it could get executed |
|
multiple times, and gcc now throws an error on that) |
|
- Add some casts to some print statements to keep gcc from complaining |
|
|
|
* Fri Oct 24 2008 Doug Ledford <dledford@redhat.com> - 2.6.7.1-1 |
|
- Updated to latest upstream stable release (#466803) |
|
- Change udev rule to not assemble degraded arrays (#453314) |
|
- Fix metadata matching in config file (#466078) |
|
- Fix assembly of raid10 devices (#444237) |
|
- Fix incremental assembly of partitioned raid devices (#447818) |
|
|
|
* Thu Jun 26 2008 Doug Ledford <dledford@redhat.com> - 2.6.7-1 |
|
- Update to latest upstream version (should resolve #444237) |
|
- Drop incremental patch as it's now part of upstream |
|
- Clean up all the open() calls in the code (#437145) |
|
- Fix the build process to actually generate mdassemble (#446988) |
|
- Update the udev rules to get additional info about arrays being assembled |
|
from the /etc/mdadm.conf file (--scan option) (#447818) |
|
- Update the udev rules to run degraded arrays (--run option) (#452459) |
|
|
|
* Thu Apr 17 2008 Bill Nottingham <notting@redhat.com> - 2.6.4-4 |
|
- make /dev/md if necessary in incremental mode (#429604) |
|
- open RAID devices with O_EXCL to avoid racing against other --incremental processes (#433932) |
|
|
|
* Fri Feb 1 2008 Bill Nottingham <notting@redhat.com> - 2.6.4-3 |
|
- add a udev rules file for device assembly (#429604) |
|
|
|
* Fri Jan 18 2008 Doug Ledford <dledford@redhat.com> - 2.6.4-2 |
|
- Bump version and rebuild |
|
|
|
* Fri Oct 19 2007 Doug Ledford <dledford@redhat.com> - 2.6.4-1 |
|
- Update to latest upstream and remove patches upstream has taken |
|
|
|
* Tue Aug 28 2007 Fedora Release Engineering <rel-eng at fedoraproject dot org> - 2.6.2-5 |
|
- Rebuild for selinux ppc32 issue. |
|
|
|
* Mon Jul 09 2007 Doug Ledford <dledford@redhat.com> - 2.6.2-4 |
|
- Oops, if we call -C -e1, minor_version is no longer properly set, fix that |
|
up |
|
- Related: bz230207 |
|
|
|
* Fri Jul 06 2007 Doug Ledford <dledford@redhat.com> - 2.6.2-3 |
|
- Oops, had to update the file leak patch, missed one thing |
|
- Minor tweak to return codes in init script and add LSB header |
|
- Resolves: bz244582, bz246980 |
|
|
|
* Mon Jul 02 2007 Doug Ledford <dledford@redhat.com> - 2.6.2-2 |
|
- Fix a file leak issue when mdadm is in monitor mode |
|
- Update mdadm init script so that status will always run and so |
|
return codes are standards compliant |
|
- Fix assembly of version 1 superblock devices |
|
- Make the attempt to create an already running device have a clearer |
|
error message |
|
- Allow the creation of a degraded raid4 array like we allow for raid5 |
|
- Make mdadm actually pay attention to raid4 devices when in monitor mode |
|
- Make the mdmonitor script use daemon() correctly |
|
- Fix a bug where manage mode would not add disks correctly under certain |
|
conditions |
|
- Resolves: bz244582, bz242688, bz230207, bz169516, bz171862, bz171938 |
|
- Resolves: bz174642, bz224272, bz186524 |
|
|
|
* Mon Jul 02 2007 Doug Ledford <dledford@redhat.com> - 2.6.2-1 |
|
- Update to latest upstream |
|
- Remove requirement for /usr/sbin/sendmail - it's optional and not on by |
|
default, and sendmail isn't *required* for mdadm itself to work, and isn't |
|
even required for the monitoring capability to work, just if you want to |
|
have the monitoring capability do the automatic email thing instead of |
|
run your own program (and if you use the program option of the monitor |
|
capability, your program could email you in a different manner entirely) |
|
|
|
* Mon Apr 16 2007 Doug Ledford <dledford@redhat.com> - 2.6.1-4 |
|
- More cleanups for merge review process |
|
- Related: bz226134 |
|
|
|
* Wed Apr 11 2007 Doug Ledford <dledford@redhat.com> - 2.6.1-3 |
|
- Various cleanups as part of merge review process |
|
- Related: bz226134 |
|
|
|
* Sat Mar 31 2007 Doug Ledford <dledford@redhat.com> - 2.6.1-2 |
|
- Oops, missing a dependency in the Makefile |
|
|
|
* Sat Mar 31 2007 Doug Ledford <dledford@redhat.com> - 2.6.1-1 |
|
- Update to latest upstream version |
|
- Resolves: bz233422 |
|
|
|
* Fri Jan 26 2007 Doug Ledford <dledford@redhat.com> - 2.6-1 |
|
- Update to latest upstream version |
|
- Remove the mdmpd daemon entirely. Now that multipath tools from the lvm/dm |
|
packages handles multipath devices well, this is no longer needed. |
|
- Various cleanups in the spec file |
|
|
|
* Thu Nov 09 2006 Doug Ledford <dledford@redhat.com> - 2.5.4-3 |
|
- Add a fix for the broken printout of array GUID when using the -E --brief |
|
flags |
|
|
|
* Fri Oct 13 2006 Doug Ledford <dledford@redhat.com> - 2.5.4-2 |
|
- tag present on another branch and can't be forcibly moved |
|
required number bump |
|
|
|
* Fri Oct 13 2006 Doug Ledford <dledford@redhat.com> - 2.5.4-1 |
|
- Update to 2.5.4 (listed as a bugfix update by upstream) |
|
- Remove previous bitmap patch that's now part of 2.5.4 |
|
|
|
* Sun Oct 8 2006 Doug Ledford <dledford@redhat.com> - 2.5.3-2 |
|
- Fix a big-endian machine error in the bitmap code (Paul Clements) |
|
|
|
* Mon Aug 7 2006 Doug Ledford <dledford@redhat.com> - 2.5.3-1 |
|
- Update to 2.5.3 which upstream calls a "bug fix" release |
|
|
|
* Wed Jul 12 2006 Jesse Keating <jkeating@redhat.com> - 2.5.2-1.1 |
|
- rebuild |
|
|
|
* Fri Jul 7 2006 Doug Ledford <dledford@redhat.com> - 2.5.2-1 |
|
- Update to 2.5.2 |
|
- Remove auto default patch as upstream now has a preferred default auto method |
|
|
|
* Wed Mar 8 2006 Peter Jones <pjones@redhat.com> - 2.3.1-3 |
|
- fix build on ppc64 |
|
|
|
* Wed Mar 8 2006 Jeremy Katz <katzj@redhat.com> - 2.3.1-2 |
|
- fix build on ppc |
|
|
|
* Wed Mar 8 2006 Jeremy Katz <katzj@redhat.com> - 2.3.1-1 |
|
- update to 2.3.1 to fix raid5 (#184284) |
|
|
|
* Fri Feb 10 2006 Jesse Keating <jkeating@redhat.com> - 2.2-1.fc5.2.1 |
|
- bump again for double-long bug on ppc(64) |
|
|
|
* Tue Feb 07 2006 Jesse Keating <jkeating@redhat.com> - 2.2-1.fc5.2 |
|
- rebuilt for new gcc4.1 snapshot and glibc changes |
|
|
|
* Fri Dec 09 2005 Jesse Keating <jkeating@redhat.com> |
|
- rebuilt |
|
|
|
* Mon Dec 05 2005 Warren Togami <wtogami@redhat.com> 2.2-1 |
|
- 2.2 upgrade (#167897) |
|
- disable diet because we don't ship it anymore |
|
and we don't actually use mdassemble now |
|
|
|
* Mon May 16 2005 Doug Ledford <dledford@redhat.com> 1.11.0-4.fc4 |
|
- Make the mdmonitor init script use the pid-file option, major cleanup |
|
of the script now possible (#134459) |
|
|
|
* Mon May 16 2005 Doug Ledford <dledford@redhat.com> 1.11.0-3.fc4 |
|
- Put back the obsoletes: raidtools that was present in 1.11.0-1.fc4 |
|
|
|
* Mon May 16 2005 Doug Ledford <dledford@redhat.com> 1.11.0-2.fc4 |
|
- Change the default auto= mode so it need not be on the command line to |
|
work with udev, however it is still supported on the command line (#132706) |
|
- Add a man page (from Luca Berra) for mdassemble |
|
|
|
* Wed May 11 2005 Doug Ledford <dledford@redhat.com> - 1.11.0-1.fc4 |
|
- Upgrade to 1.11.0 |
|
|
|
* Wed Apr 27 2005 Jeremy Katz <katzj@redhat.com> - 1.9.0-3.fc4 |
|
- fix mdmonitor initscript (#144717) |
|
|
|
* Mon Mar 21 2005 Doug Ledford <dledford@redhat.com> 1.9.0-2 |
|
- Build mdadm.static and mdassemble (static as well) to be used in initrd |
|
images |
|
|
|
* Wed Mar 09 2005 Doug Ledford <dledford@redhat.com> 1.9.0-1 |
|
- Initial upgrade to 1.9.0 and update of doc files |
|
- Fix an s390 build error |
|
|
|
* Mon Oct 04 2004 Doug Ledford <dledford@redhat.com> 1.6.0-2 |
|
- Remove /etc/mdadm.conf from the file list. Anaconda will write one out |
|
if it's needed. |
|
|
|
* Fri Oct 01 2004 Doug Ledford <dledford@redhat.com> 1.6.0-1 |
|
- Update to newer upstream version |
|
- Make mdmpd work on kernels that don't have the event interface patch |
|
|
|
* Fri Jul 30 2004 Dan Walsh <dwalsh@redhat.com> 1.5.0-11 |
|
- Create a directory /var/run/mdadm to contain mdadm.pid |
|
- This cleans up SELinux problem |
|
|
|
* Tue Jun 15 2004 Elliot Lee <sopwith@redhat.com> |
|
- rebuilt |
|
|
|
* Sat May 22 2004 Doug Ledford <dledford@redhat.com> - 1.5.0-9 |
|
- Fix Makefile and build method to satisfy bz #123769 |
|
- Add mdmpd man page, update mdmpd version to 0.3 - bz #117160 |
|
- Make sure mdadm --monitor closes all md device files so that md devices |
|
can be stopped while mdadm is still running - bz #119532 |
|
|
|
* Thu May 20 2004 Jeremy Katz <katzj@redhat.com> - 1.5.0-8 |
|
- remove unneeded patch, can use --run instead |
|
|
|
* Wed May 19 2004 Jeremy Katz <katzj@redhat.com> - 1.5.0-7 |
|
- add patch with reallyforce mode on creation to be used by anaconda |
|
|
|
* Wed May 12 2004 Doug Ledford <dledford@redhat.com> 2.5.0-6 |
|
- Fix a bug in the postun scriptlet related to downgrading to a version |
|
of mdadm that doesn't include the mdmpd daemon. |
|
|
|
* Fri May 07 2004 Doug Ledford <dledford@redhat.com> 1.5.0-5 |
|
- Disable service mdmpd by default to avoid [Failed] messages on |
|
current 2.6 kernels. Possibly re-enable it by default once the |
|
2.6 kernels have the md event interface. |
|
|
|
* Thu Apr 22 2004 Doug Ledford <dledford@redhat.com> 1.5.0-4 |
|
- Update mdmonitor script to start daemon more cleanly |
|
- Repackage mdmpd tarball to include gcc-3.4 changes and to make |
|
mdmpd properly daemonize at startup instead of forking and leaving |
|
the child attached to the terminal. |
|
|
|
* Thu Mar 4 2004 Bill Nottingham <notting@redhat.com> 1.5.0-3 |
|
- ship /var/run/mpmpd (#117497) |
|
|
|
* Thu Feb 26 2004 Doug Ledford <dledford@redhat.com> 1.5.0-2 |
|
- Add a default MAILADDR line to the mdadm.conf file installed by default |
|
(Bugzilla #92447) |
|
- Make it build with gcc-3.4 |
|
|
|
* Mon Feb 23 2004 Doug Ledford <dledford@redhat.com> 1.5.0-1 |
|
- Update to 1.5.0 (from Matthew J. Galgoci <mgalgoci@redhat.com>) |
|
|
|
* Sun Nov 16 2003 Doug Ledford <dledford@redhat.com> 1.4.0-1 |
|
- fix problem with recovery thread sleeping in mdmpd |
|
|
|
* Fri Nov 14 2003 Doug Ledford <dledford@redhat.com> |
|
- sync upstream |
|
- add mdmpd package into mdadm package |
|
|
|
* Wed Sep 10 2003 Michael K. Johnson <johnsonm@redhat.com> 1.3.0-1 |
|
- sync upstream |
|
|
|
* Tue Mar 11 2003 Michael K. Johnson <johnsonm@redhat.com> 1.1.0-1 |
|
- sync upstream |
|
|
|
* Tue Jan 28 2003 Michael K. Johnson <johnsonm@redhat.com> 1.0.1-1 |
|
- update for rebuild |
|
|
|
* Wed Dec 25 2002 Tim Powers <timp@redhat.com> 1.0.0-8 |
|
- fix references to %%install in the changelog so that it will build |
|
|
|
* Fri Dec 13 2002 Elliot Lee <sopwith@redhat.com> 1.0.0-7 |
|
- Rebuild |
|
|
|
* Fri Jul 12 2002 Michael K. Johnson <johnsonm@redhat.com> |
|
- Changed RPM Group to System Environment/Base |
|
|
|
* Wed May 15 2002 Michael K. Johnson <johnsonm@redhat.com> |
|
- minor cleanups to the text, conditionalize rm -rf |
|
- added mdmonitor init script |
|
|
|
* Fri May 10 2002 <neilb@cse.unsw.edu.au> |
|
- update to 1.0.0 |
|
- Set CXFLAGS instead of CFLAGS |
|
|
|
* Sat Apr 6 2002 <neilb@cse.unsw.edu.au> |
|
- change %%install to use "make install" |
|
|
|
* Fri Mar 15 2002 <gleblanc@localhost.localdomain> |
|
- beautification |
|
- made mdadm.conf non-replaceable config |
|
- renamed Copyright to License in the header |
|
- added missing license file |
|
- used macros for file paths |
|
|
|
* Fri Mar 15 2002 Luca Berra <bluca@comedia.it> |
|
- Added Obsoletes: mdctl |
|
- missingok for configfile |
|
|
|
* Tue Mar 12 2002 NeilBrown <neilb@cse.unsw.edu.au> |
|
- Add md.4 and mdadm.conf.5 man pages |
|
|
|
* Fri Mar 08 2002 Chris Siebenmann <cks@cquest.utoronto.ca> |
|
- builds properly as non-root. |
|
|
|
* Fri Mar 08 2002 Derek Vadala <derek@cynicism.com> |
|
- updated for 0.7, fixed /usr/share/doc and added manpage |
|
|
|
* Tue Aug 07 2001 Danilo Godec <danci@agenda.si> |
|
- initial RPM build
|
|
|